& HELP

  This is the MUX online help facility for wizard commands and topics.
  The information provided by this command is generally not useful for
  anyone other than wizards and game maintainers, as the features described
  here are only accessible to characters whose WIZARD bit is set, or to those
  who have access to the directory where the MUX data files reside.

  Syntax of help command:
     wizhelp [<command/topic>]

  To get a list of MUX wizard topics:
     wizhelp topics

  To get a list of MUX wizard commands:
     wizhelp commands

  If there are any errors in the help text, please notify a Wizard.

  Related Topics: help.

& @ADDCOMMAND
@ADDCOMMAND

  COMMAND: @addcommand <name>=<thing>/<attribute>

  This command has the capability of adding a softcoded command to the MUX's
  built-in command table. If <name> already exists as a built-in command,
  such as 'look' or 'WHO', it will actually replace the functionality of
  that command, and all aliases that currently point to it. As in look's
  case, the aliases 'l', 'lo', and 'loo', and the main command 'look' will
  all point to these softcoded commands. The syntax of <thing>/<attribute> is
  like any normal $command.

  For example:

  > &LOOK me=$look:say I looked here!
  > &LOOK_WITH_ARG me=$look *:say I looked at %0!
  > &LOOK_OUTSIDE me=$look/outside *:say I looked outside at %0!
  > @addcommand look=me/look
  > @addcommand look=me/look_with_arg
  > @addcommand look=me/look_outside

{ 'wizhelp @addcommand2' for more }

& @ADDCOMMAND2
@ADDCOMMAND (continued)

  Yes, you can specify more than one attribute to go with <name>. When you
  type 'look' or 'look sofa', the game will execute all attributes that
  match what you have typed in. Aliases like 'l' are expanded to 'look' so
  you don't have to worry about those when you take command matching into
  consideration. If none of the attributes attached match (the attribute
  *must* begin with $<name> in order to match at all!), no output will
  be generated.

  Another use is to speed up use of a particular global command. Just use
  @addcommand to add it to the built-in list, and it will be looked up
  much faster.

  Related Topics: @delcommand, @listcommands.

& @ADMIN
@ADMIN

  COMMAND: @admin <param>=<value>

  Sets a TinyMUX configuration parameter to the indicated value. Type
  'wizhelp config parameters' for a list of the config parameters that
  may be set.

  By default, only #1 can use @admin, but like most commands, this can be
  configured with 'access'.  The wrinkle is that each <param> has its own
  permissions which would prevent @admin from being useful to anyone but #1
  without also changine the <param>'s permissions with 'config_access'.

  Related Topics: access, config_access.

& @ALLOWANCE
@ALLOWANCE

  ATTRIBUTE: Allowance

  COMMAND: @allowance <object>[=<amount>]

  Sets the amount of money that the player receives each day he/she connects
  to the MUX.  The Allowance attribute overrides the default allowance
  specified by the paycheck config parameter.

  This attribute is only visible and settable by wizards.  It is only
  meaningful for players, and has no effect on other object types.

& @APPLY_MARKED
@APPLY_MARKED

  COMMAND: @apply_marked <command>

  Performs <command> once for each object in the database that has its MARK
  flag set, substituting the characters ## for the object number of the
  marked object.  The command is performed by the player invoking the
  @apply_marked command, not by the marked object.  This command may only
  be used when database cleaning is disabled (via @disable cleaning),
  as cleaning uses the MARKED flag to check connectivity.

  Related Topics: @mark, @mark_all, MARKED.

& @ATTRIBUTE
@ATTRIBUTE

  COMMAND: @attribute[/<switch>] <attrib>[=<value>]

  Performs operations on user-named attributes depending on the switch used.
  The following switches are available:

     /access   - Changes the access to the named attribute.  <value> is a
                 space-separated list of permissions to add or remove from
                 the attribute's access permissions. For a list of possible
                 values, see the related topic given below.

     /delete   - Removes the named attribute from the attribute table.
                 This switch does not remove instances of the attribute from
                 objects, and any that remain will be renamed to the
                 user-named attribute that re-uses the attribute number
                 of the deleted attribute.

     /rename   - Changes the name of the named attribute to <value>.

  Note that changes to user-named attributes performed by this command
  are permanent and do not need to be performed each time the MUX is
  restarted. Further this also only affects user-named attributes. 

  Related Topics: attribute permissions, attr_access

& @BACKUP
@BACKUP

  COMMAND: @backup

  This command will dump a flatfile of the database to the data directory.
  The flatfile will be named dump.<date>.tgz. IE, dump.0219-1613.tgz where
  0219-1613 stands for February 19, 4:13pm.

  This file is tarred and gziped. It includes the game flatfile, and the
  mail and comsys databases. It does not include any of the text files, the
  .conf files or the mux.config file. Those would need to be backed up
  separately.

  Related Topics:

& @BOOT
@BOOT

  COMMAND: @boot[/quiet] <player>
           @boot/port <port#>

  Severs the named player's connection to the game.  The player is given a
  notice that they have been booted.  If the player is connected to the game
  more than once, then all connections to that player are severed.

  The following switches are available:

    /quiet - Don't give the booted player any special notice.

    /port  - Disconnects only a specific port.  In this case, <port#> must
             be the port number obtained from the SESSION command.

  Related Topics: @destroy, @toad, SESSION.

& @CHOWN
@CHOWN

  COMMAND: @chown <object>=<player>

  Wizards may @chown objects, rooms, and exits to other players.
  @Chowned objects are set HALT.

  Related Topics: @chownall.

& @CHOWNALL
@CHOWNALL

  COMMAND: @chownall[/nostrip] <victim>[=<recipient>]

  Changes the ownership of all of the victim's objects, rooms, and exits to
  the indicated recipient (or to the wizard performing the @chownall if
  no recipient is specified).  All objects, rooms, and exits are set HALTED.

  Without the /nostrip switch, CHOWN_OK, all flags specified in the
  stripped_flags configuration option, and all @powers are stripped.  Also,
  HALT is set.  With /nostrip, ROYALTY and INHERIT are preserved.  #1 can use
  /nostrip to further preserve WIZARD and @powers.
  
  By default, stripped_flags includes: BLIND, CONNECTED, GAGGED, HEAD_FLAG,
  IMMORTAL, INHERIT, ROYALTY, SLAVE, STAFF, SUSPECT, UNINSPECTED, and WIZARD.

  Related Topics: @chown.

& @CLONE
@CLONE

  COMMAND: @clone[/<switches>] <object>

  Wizards may also specify the /preserve switch, which preserves the original
  owner of the object in the new copy, instead of creating the copy as being
  owned by the wizard.

& @COMMENT
@COMMENT

  ATTRIBUTE: Comment

  COMMAND: @comment <object>[=<text>]

  Sets a wizard-visible comment on the indicated object. This attribute is
  only visible and settable by wizards.

& @CUT
@CUT

  COMMAND: @cut <object/exit>

  Cuts off the object or exit list for the current location at the indicated
  object or exit by setting [next(thing)] to NOTHING.  Objects or exits that
  follow in the chain are not moved or otherwise changed, and are only
  accessible by object number.  This command is intended for performing
  database repair, and should be used only with extreme caution.

& @DBCK
@DBCK

  COMMAND: @dbck[/full]

  Performs a scan of the database looking for inconsistencies in the object
  chains, disconnected rooms, rooms waiting to be destroyed, and problems in
  the object free list.  Problems that are found are reported to the log
  file, disconnected rooms are reported to their owners, and players are
  credited for rooms destroyed.  Database checks are automatically run
  periodically, so there is usually no need to use this command.

  With the /full switch, @dbck performs more thorough checking, but the
  additional log messages will need more careful consideration and
  interpretation.  Some of these messages can provide very useful insight
  into the state of the database, but it doesn't make sense to run these
  checks automatically.

  Related Topics: @admin, @disable, @enable, @list.

& @DBCLEAN
@DBCLEAN

  COMMAND: @dbclean

  This command searches the entire database and removes any stale
  user-defined attributes.  It should be used sparingly, as it may take many
  minutes to execute, depending upon database size and machine speed.  Only
  God may execute this command.

& @DELCOMMAND
@DELCOMMAND

  COMMAND: @delcommand <name>[=<thing>/<attribute>]

  Deletes a command added by @addcommand.  With only <name> specified,
  deletes all added commands under <name>.  When you specify <thing> and
  <attribute>, it only deletes that specific entry.  If the command or
  commands you are deleting had replaced a built-in command, the built-in
  command and all aliases are restored to their normal names and actions.

  Related Topics: @addcommand, @listcommands.

& @DESTROY
@DESTROY

  COMMAND: @destroy[/<switches>] <object>

  Players are always considered SAFE.  Objects owned by other players are
  not otherwise treated specially.

& @DISABLE
@DISABLE

  COMMAND: @disable <option>

  Turns off the indicated MUX runtime parameter.  The following parameters
  may be turned off:

    building      - Allows players to use the building commands.
    checkpointing - Enables periodic database checkpoint dumping.
    cleaning      - Enables periodic scanning of the database for rooms
                    to be destroyed.
    dequeueing    - Allows commands to be removed from the queue and
                    executed.
    idlechecking  - Enables periodic checking for and booting of idle
                    players.
    interpret     - Enables execution of commands that place commands
                    on the queue.
    logins        - Allows nonwizard players to connect to their characters.
    eventchecking - Enables certain attribute events (@daily, etc) to occur.

  These parameters are all enabled by default.

  Related Topics: @enable, @list.

& @DOING
@DOING

  COMMAND: @doing[/<switch>] <text>

  Wizards may use the /header switch to set the Doing header in the WHO report.
  If no header is specified, the header is reset to "Doing".

& @DUMP
@DUMP

  COMMAND: @dump[/<switches>]

  Writes a checkpoint dump of the database to disk.  Checkpoint dumps are
  automatically performed periodically, so there is usually no need to use
  this command.  Switches may be used to either dump just the structure
  or text portions of the database to disk.  The default is to write out
  both the text and structure portions.

  All of the following switches may by used individually or together:

     flatfile   - Dump an internally consistent flatfile which together
                  with the mail and comsystem databases represent the
                  entire database of game -- useful in a variety of ways
                  including for a backup and for moving from one host to
                  another.
     structure  - Dump the structure portion of the database to a linear
                  human-readable file.
     text       - Ensure that all changes to the text portion of the
                  database are written out to disk.

  Note that the above structure and text options will cause your database and
  certain caches to be out of sync. They should NOT be used in the course
  of normal operation.

  Related Topics: @admin, @disable, @enable, @list, @shutdown.

& @ENABLE
@ENABLE

  COMMAND: @enable <option>

  Turns on the indicated MUX runtime parameter.  The following parameters
  may be turned on:

    building      - Allows players to use the building commands.
    checkpointing - Enables periodic database checkpoint dumping.
    cleaning      - Enables periodic scanning of the database for rooms
                    to be destroyed.
    dequeueing    - Allows commands to be removed from the queue and
                    executed.
    idlechecking  - Enables periodic checking for and booting of idle
                    players.
    interpret     - Enables execution of commands that place commands
                    on the queue.
    logins        - Allows nonwizard players to connect to their characters.
    eventchecking - Enables certain attribute events (@daily, etc) to occur.

  These parameters are all enabled by default.

  Related Topics: @disable, @list.

& @FIXDB
@FIXDB

  COMMAND: @fixdb[/<switch>] <object>=<value>

  This command directly edits the database structure according to the
  switch specified.  As such, it is possible to produce database
  inconsistencies that can hang or crash the server.  This command should
  be used with extreme caution.

  The following switches are available:

     contents     - Sets the contents pointer of <object> to <value>
     exits        - Sets the exits pointer of <object> to <value>
     location     - Sets the location pointer of <object> to <value>
     next         - Sets the next pointer of <object> to <value>
     owner        - Sets the owner of <object> to <value>
     pennies      - Sets the value or wealth of <object> to <value>
     rename       - Renames <object> to <value>

& @FLAG
@FLAG

  Command: @flag[/<switch>] <oldflag>[=<newflag>]

  This command either removes aliases of existing flags, or renames the flag.
  For example, if you rename CONNECTED to BOBTHEWIZ, then whenever you
  reference the previous 'CONNECTED' flag, it will be seen as 'BOBTHEWIZ'
  instead.  This does not affect the character of 'c' for the flag, only the
  name of it.  This takes effect until the server is shutdown or rebooted.
  To make a permanent addition, you need to use the 'flag_name' config
  parameter in the conf file.  The flag name must be between 1 and 63
  characters, inclusively, and can not be a previously existing flag name.
  If such a condition exists, it will return an error.

  Switches:
     /remove - used to remove a flag's alias.

  Examples:
    @flag/remove con (removes alias 'con' for 'connected')
    @flag connect=bobthewiz (renames 'connected' to 'bobthewiz')

  Note: The previous naming conventions are referenced automatically as
  aliases for the flag unless specifically removed.

  Related Topics: flag_name.

& @FUNCTION
@FUNCTION

  COMMAND: @function[/<switches>] <function>=<object>/<attr>

  This command displays a list of currently-defined global functions or
  adds a new global function named <function>.  When invoked, the
  arguments to the function are loaded into %0-%9, the <attr> attribute
  from <object> is fetched, and substitution is performed on the
  resulting text.  The result of that substitution is returned as the
  function result.

  If no arguments are given, or if the /list switch is given, the command
  displays a list of the currently-defined global functions. /privileged
  functions are indicated with a 'W' and /preserve functions are indicated
  with a 'p'.

  If the /privileged switch is given, then the new global function is
  evaluated as if the evaluation were being performed by the object on
  which it is stored, instead of as if it were being performed by the
  invoker of the function.  This may be used to allow access to
  information normally available only to wizards.

  The /preserve switch causes r-registers to be preserved across the
  defined function, so you can feel free to use registers in the code
  without worrying about them overwriting previous definitions.

  The function definitions created by @function are not stored in the
  database so they need to be re-created each time the MUX is started.
  It is recommended that the Startup attribute for player #1 include
  code to set up all global functions.

  Function definitions may not be removed (aside from shutting down and
  restarting the MUX, but they may be redefined so that they point to
  an unused attribute.  This command may normally only be invoked by
  player #1.

& @HALT
@HALT

  COMMAND: @halt[/<switches>] [<object>]

  This command can be used to halt commands being run by a specific object,
  all commands being run by objects owned by a specific player, or all
  commands in the game.  If <object> is not specified, the object running
  the command is halted.  If the object being halted is a player, then
  all commands being run by objects owned by that player are halted.
  Halting an object does not affect commands waiting on it as a semaphore,
  use the @drain command to reset a semaphore.

  The /all switch may be used to halt all commands globally.

  Related Topics: @drain, @notify, kill, HALTED, SEMAPHORES.

& @HOOK
@HOOK

  Command: @hook[/<switch(s)>] [<command/attribute>]

  This command will set up 'hooks' to be applied to various commands or
  attributes.  You may specify multiple hooks on items.  The HOOK_OBJ is
  an @admin param that specifies the hook object.  The following hooks exist:

         /before    - Set up a BEFORE hook which will execute before the
                      corresponding built-in command/attribute is executed.
                      The HOOK_OBJ attribute is b_<command>.

         /after     - Set up an AFTER hook on a command which will execute
                      after the corresponding built-in command/attribute is
                      executed.  The HOOK_OBJ attribute is a_<command>.

         /permit    - Affects command permission.  Return BOOLEAN TRUE to
                      permit. Return FALSE to notify the enactor with
                      'Permission denied.'.  The HOOK_OBJ attribute is
                      p_<command>.

         /ignore    - Return BOOLEAN FALSE to ignore the corresponding
                      built-in command.  Any matching softcoded commands
                      continue to be handled.  The HOOK_OBJ attribute is
                      i_<command>.

         /igswitch  - Specifies that any non-matching /switch to the command
                      falls through and is handled by softcode.  This allows
                      you to softcode switches to built-in commands.

         /fail      - Set up a FAIL hook which executes if the command is
                      somehow block by a @hook/permit or @icmd/disable.
                      The HOOK_OBJ attribute is af_<command>.

         /clear     - When used in junction with any of the above switches,
                      will clear the hook from being applied.

         /list      - This lists the current commands/attributes with hooks.

{ 'wizhelp @hook2' for examples}

& @HOOK2
@HOOK (continued)

  Examples of @hook are as follows:

    > @hook/before look
    @hook: new mask for 'look' -> before
    > @hook/after look
    @hook: new mask for 'look' -> before after
    > @hook/igswitch look
    @hook: new mask for 'look' -> before after igswitch
    > @hook/igswitch/clear look
    @hook: new mask for 'look' -> before after
    > @hook/list (or just @hook will work)
    ---------------------------------+---------------------------------------
    Built-in Command                 | Hook Mask Values
    ---------------------------------+---------------------------------------
    look                             | before after
    ---------------------------------+---------------------------------------
    Built-in Attribute               | Hook Mask Values
    ---------------------------------+---------------------------------------
                               -- No @hooks defined --
    ---------------------------------+---------------------------------------

  Related Topics: hook_obj, hook_cmd, HOOK SETUP.

& @ICMD
@ICMD

  Command: @icmd</switch> <player [= arguments]>

  This command sets personal command permissions on a player.
  It only is useful for removing commands and not granting them.
  This command is available only to #1.
  Possible switches are:
    /ON       - Turn on personal command parsing so that it checks
                against invalid commands for the player. (Default)
    /OFF      - Turn off personal command parsing so that commands
                by player parses normally.
    /DISABLE  - Disables the given command so it returns a
                Permission Denied. (Default)
    /IGNORE   - This command actually removes from existence the
                specified commands from the user's standpoint so
                that it is skipped upon command execution checks.
    /CHECK    - Displays a list of the specified players current
                disabled commands and at what level.
                1=disabled   2=ignored
    /CLEAR    - Removes all icmd information from player.

{ Type 'wizhelp @icmd2' for more switches }

& @ICMD2
@ICMD (continued)

  Command: @icmd</switch> <player [= arguments]>
  Continued Switches:

    /IROOM    - This sets commands ignored on the location.
                This is a NON-PLAYER.
    /DROOM    - This sets commands disabled on the location.
                This is a NON-PLAYER.
    /CROOM    - Clears disabled/ignored commands on target location.
                This is a NON-PLAYER.
    /LROOM    - List disabled/ignored commands on target location.
                This is a NON-PLAYER.
    /LALLROOM - List all disabled/ignored commands at location
                and zones from location.  Listings that start with
                'z' are zonemasters.

{ Type 'wizhelp @icmd3' for examples and syntax }

& @ICMD3
@ICMD (continued)

  Command: @icmd</switch> <player [= arguments]>

  The commands can be specified on the player in the form of:
  COMMAND, !COMMAND, COMMAND, ..., etc

  To remove the command from the player, a ! must be specified.
  To change the level from DISABLE to IGNORE or visa versa, it
  must first be REMOVED then ADDED.  For example:

    @icmd/disable TinyJerk=page, whisper, @emit, @pemit
    @icmd/ignore TinyJerk=!@pemit, !@emit, @pemit, @emit

  The above would first set all four to disable.  The second
  would remove @emit and @pemit and then re-add it as ignored.
  The /disable switch is the default and assumed if no switches
  are specified.  All aliases are taken into effect automatically.
  For rooms you could do the following:

    @icmd/droom here=page, whisper, @emit, @pemit
    @icmd/iroom here=!@pemit, !@emit, @pemit, @emit

  Example:  @icmd/ignore majortwit=page,",:,say,pose,@emit,@pemit,whisper,;
            @icmd/ignore dimwit=page,!say,!",pose,:

  Related Topics: access

& @KICK
@KICK

  COMMAND: @kick <count>

  Immediately executes the first <count> commands from the top of the queue.

  Related Topics: @disable, @enable, @timewarp.

& @LIST
@LIST

  COMMAND: @list [<option>]

  Lists information from internal databases.  Information is available
  about the following options:

    allocations         attr_permissions    attributes          bad_names
    buffers             commands            costs               db_stats
    default_flags       flags               functions           globals
    guests              hashstats           logging             options
    permissions         powers              process             site_info
    switches            user_attributes

  Type wizhelp @list <option> for help with a particular option.

& @LIST ALLOCATIONS
@LIST ALLOCATIONS

  COMMAND: @list allocations

  This command lists the usage statistics for the internal buffer pools.
  For each buffer pool, the following information is listed:

    Size   - The size of a buffer, in characters.
    InUse  - The number of buffers presently allocated from the pool.
    Total  - The total number of buffers currently in the pool.
    Allocs - The total number of buffers ever allocated from the pool.
    Lost   - The number of buffers lost due to buffer header corruption.

  Information is reported for the following pools:

    Lbufs    - Large buffers, used when handling data input by the user,
               object attributes, the results of interpreting commands, and
               many other places.
    Mbufs    - Medium-sized buffers, for when an sbuf is too small but an lbuf
               is too large.
    Sbufs    - Small buffers, for when you need only a little space.
    Bools    - Boolean expressions, used when evaluating locks.
    Descs    - Network descriptors, one is used for each connected player.
    Qentries - Queue entries, one is used for each command placed on the
               queue. (@wait, @trigger, @switch, @dolist, etc).
    Lbufrefs - Reference counting structures for the lbufs that hold global
               r-register contents.
    Regrefs  - Reference counting structures for global r-registers.

  Related Topics: @list buffers.

& @LIST ATTRIBUTES
@LIST ATTRIBUTES

  COMMAND: @list attributes

  Lists the attributes that are visible or settable by you.

  Related Topics: @list attr_access, @list permissions.

& @LIST ATTR_PERMISSIONS
@LIST ATTR_PERMISSIONS

  COMMAND: @list attr_permissions

  Lists the attributes and the access restrictions that have been placed on
  them. The attributes are listed one per line.  Refer to the attr_access
  config parameter for the meanings of the restrictions.

  Note that being allowed to write to an attribute does not imply the right
  to use the @<attr-name> shorthand command to set it, just the @set command.

  Related Topics: @list permissions, attr_access.

& @LIST BAD_NAMES
@LIST BAD_NAMES

  COMMAND: @list bad_names

  This command lists the player names that are not allowed to be created.
  Any create request (whether via the login screen or @pcreate) that matches
  (after wildcard expansion) one of the names in the list will be rejected.

& @LIST BUFFERS
@LIST BUFFERS

  COMMAND: @list buffers

  For each buffer in a buffer pool that is currently allocated, lists where
  within TinyMUX the buffer was allocated.

& @LIST COMMANDS
@LIST COMMANDS

  COMMAND: @list commands

  Lists the internal commands that you may execute.  This command does not
  list the attribute-setting commands that you may use (like @va or @ahear),
  and does not list exits in your current room or $-commands on objects.

  Related Topics: @list attr_access, @list attributes, @list permissions.

& @LIST COSTS
@LIST COSTS

  COMMAND: @list costs

  Lists the costs that are associated with some commands, particularly those
  that expand the database.

& @LIST DB_STATS
@LIST DB_STATS

  COMMAND: @list db_stats

  Lists statistics for the database cache. If compression is enabled,
  displays compression statistics as well.

& @LIST DEFAULT_FLAGS
@LIST DEFAULT_FLAGS

  COMMAND: @list default_flags

  Lists the flags that are automatically given to players, things, rooms,
  exits, and robots when they are created.

  Related Topics: player_flags, thing_flags, room_flags, exit_flags,
                  robot_flags.

& @LIST FLAGS
@LIST FLAGS

  COMMAND: @list flags

  For each object type, lists the name and key letter for all flags that may
  be set on that object type that are visible to you.

& @LIST FUNCTIONS
@LIST FUNCTIONS

  COMMAND: @list functions

  Lists the functions that may be used to obtain information when evaluating
  command lines.

& @LIST GLOBALS
@LIST GLOBALS

  COMMAND: @list globals

  Lists the global parameters that may be set or cleared by the @enable and
  @disable commands.  The following parameters are displayed.

    building      - Indicates whether or not commands that alter the
                    structure of the database are allowed.
    checkpointing - Indicates whether or not the database is to be
                    periodically written to disk.
    cleaning      - Indicates whether or not the database is to be
                    periodically checked for deleted or disconnected rooms,
                    and other connectivity problems.
    dequeueing    - Indicates whether or not commands on the queue may be
                    automatically executed.
    idlechecking  - Indicates whether or not the inactivity limits are
                    enforced.
    interpret     - Indicates whether or not new commands may be added to
                    the queue.

{ 'wizhelp @list globals2' for more }

& @LIST GLOBALS2
@LIST GLOBALS (continued)

    logins        - Indicates whether or not nonwizard players are allowed
                    to connect.

  Related Topics: @dbck, @disable, @enable, @kick, @list permissions,
                  @timewarp, checkpoint, conn_timeout, dump_interval,
                  dump_offset, idle_interval, idle_timeout.

& @LIST GUESTS
@LIST GUESTS

  COMMAND: @list guests

  Lists all the guests currently on the MUX, the name and dbref, if they are
  connected or not, and the lastsite of the guest. A * before the entry
  denotes that the guest will NOT be destroyed on an @dbck.

& @LIST HASHSTATS
@LIST HASHSTATS

  COMMAND: @list hashstats

  Lists the hashing statistics for each of the internal hash tables.
  For each hash table, the following information is displayed:

    Size    - The number of hash buckets in the hash table.
    Entries - The number of entries currently in the hash table.
    Deleted - The number of entries that have been deleted from the hash
              table.
    Empty   - The number of hash buckets with no entries.
    Lookups - The number of times the hash table has been searched.
    Hits    - The number of times that an item that was searched for was
              found.
    Checks  - The total number of comparisons made against hash table entries
              to see if they were the desired entry.
    Longest - The maximum number of entries in one hash bucket.

{ 'wizhelp @list hashstats2' for more }

& @LIST HASHSTATS2
@LIST HASHSTATS (continued)

  Information is displayed for the following hash tables:

    Commands            - Internal MUX commands
    Logged-out commands - Commands valid whether or not you are connected
                          (such as WHO and QUIT).
    Functions           - MUX functions, such as rand() and lexits().
    Flags               - Names of flags.
    Powers              - Names of powers.
    Attribute names     - Object attribute names.
    Attribute numbers   - Object attribute numbers (only used internally).
    Player names        - Names of all players.
    Net descriptors     - Mapping of player DB numbers to net descriptors.
    News topics         - Topics for the news command.
    Help topics         - Topics for the help command.
    Wizhelp topics      - Topics for the wizhelp command.

  Related Topics: alias, attr_alias, flag_alias.

& @LIST LOGGING
@LIST LOGGING

  COMMAND: @list logging

  Lists the type of information that is written to the log file and how it is
  displayed.  The following types of information may be logged:

    accounting     - Usage information on player disconnect.
    all_commands   - All commands executed by anyone or anything.
    bad_commands   - Commands that resulted in a 'Huh?' message.
    buffer_alloc   - Allocates and frees of buffers in the buffer pools.
    bugs           - Things that should never happen, but did.
    checkpoints    - Writes of the database to disk.
    config_changes - Changes in the configuration parameters.
    create         - The creation of new players.
    killing        - Use of the kill command, successful and unsuccessful.
    logins         - Players connecting and disconnecting.
    network        - New and dropped network connections.
    problems       - Database inconsistencies that are found.
    security       - Connect attempts with the wrong password, etc.
    shouts         - Messages sent to all players or all wizards.
    startup        - Events while starting up.
    wizard         - Use of powerful wizard commands, like @toad.

{ 'wizhelp @list logging2' for more }

& @LIST LOGGING2
@LIST LOGGING (continued)

  The following formatting information is listed:

    flags          - Include flags for players/objects/rooms listed.
    location       - Include location if player/object when requested.
    owner          - Include owner of objects/rooms listed.
    timestamp      - Prefix log entries by a timestamp.

  Related Topics: log, log_options.

& @LIST OPTIONS
@LIST OPTIONS

  COMMAND: @list options

  Lists the value of many of the configuration parameters.

  Related Topics: @admin.

& @LIST PERMISSIONS
@LIST PERMISSIONS

  COMMAND: @list permissions

  For each command that you are allowed to use, lists the permissions that are
  needed to execute it.

  Related Topics: access, attr_cmd_access.

& @LIST POWERS
@LIST POWERS

  COMMAND: @list powers

  Lists the various powers.

& @LIST PROCESS
@LIST PROCESS

  COMMAND: @list process

  Lists information about the running MUX process and its resource usage.
  The following information is returned:

     Process number.
     Pagesize of the system running the MUX, in bytes.
     CPU time used, both user and system.
     Maximum resident size, in both pages and bytes.
     Integral resident size of the shared, private, and stack segments.
        This number is not terribly useful.
     Page faults, counting separately those that cause I/O and those that do
        not.
     Number of times the process has been swapped out.
     Number of real disk reads and writes done (possibly via NFS).
     Number of network packets read and written.
     Context switches, counting separately voluntary switches (as the result
        of calling a blocking I/O routine) and involuntarily switches (as the
        result of a timeslice end or a higher-priority process becoming
        runnable).
     Signals received.
     How many file descriptors are available to the MUX.

& @LIST SITE_INFORMATION
@LIST SITE_INFORMATION

  Command: @LIST SITE_INFORMATION

  Lists the contents of the site access and suspect lists.

    Address - The address to which this entry applies.
    Mask    - The mask that is ANDed to both the input address and the address
              in the entry when checking to see if this entry is to be used.
    Status  - Indicates what type of access or restriction is to be applied.
              The following statuses may occur in the site access list:

                Forbidden    - Connections from this site are rejected.
                Registration - Connections from this site are accepted,
                               new characters may not be created with the
                               'create' command, players wanting a character
                               must get a wizard to create one for them.
                Unrestricted - Connections from this site are accepted,
                               new characters may be created with the 'create'
                               command.

{ 'wizhelp @list site_information2' for more }

& @LIST SITE_INFORMATION2
@LIST SITE_INFORMATION (continued)

              The following statuses may occur in the site suspect list:

                Suspected    - Notify logged-in wizards of any connects or
                               disconnects from this site.
                Trusted      - Don't notify wizards of connects or disconnects
                               from this site.

  Related Topics: forbid_site, permit_site, register_site, suspect_site,
                  trust_site, nositemon_site, guest_site.

& @LIST SWITCHES
@LIST SWITCHES

  COMMAND: @list switches

  Lists the commands that support switches as well as the switches that may
  be used.

& @LIST USER_ATTRIBUTES
@LIST USER_ATTRIBUTES

  COMMAND: @list user_attributes [<pattern>]

  Lists the defined user-named attributes, along with their internal
  attribute numbers and access restrictions.

  If <pattern> is given, only the user-named attributes which match
  the <pattern> are reported.

& @LISTCOMMANDS
@LISTCOMMANDS

  COMMAND: @listcommands [<name>]

  Lists commands added by @addcommand. With <name> specified, lists all
  commands added under that particular command name. Without it, lists all
  added commands.

  Related Topics: @addcommand, @listcommands.

& @LISTMOTD
@LISTMOTD

  COMMAND: @listmotd

  Lists the current MOTD messages as set by the @motd command.

  Related Topics: @motd.

& @LIST_FILE
@LIST_FILE

  COMMAND: @list_file <file>

  Lists the contents of one of the message files that are shown during the
  connect/create/disconnect process as conditions warrant.  The following
  files may be listed:

     badsite_connect - shown when a connection is opened from a forbidden
                       site.
     connect          - shown when a connection is opened from a site for
                        which registration is not enforced.
     create_register  - shown when the 'create' command is used from a site
                        for which registration is enforced.
     down             - shown when a non-wizard attempts to connect to or
                        create a character when logins are disabled.
     full             - shown when a non-wizard attempts to connect to or
                        create a character when the maximum number of connected
                        players are connected.  Note that this is different
                        from what happens when someone tries to connect but
                        there are no free descriptors, which is
                        machine-dependent (usually the connect attempt hangs
                        or is rejected).
     guest_motd       - shown to guest characters immediately after they
                        connect.

{ 'wizhelp @list_file2' for more }

& @LIST_FILE2
@LIST_FILE (continued)

     motd             - shown to all players immediately after they connect.
                        (except guests and players connecting for the first
                        time)
     newuser          - shown to players the first time they connect in place
                        of the motd file.
     quit             - shown to players when they disconnect from the game.
     register_connect - shown when a connection is opened from a site for
                        which registration is enforced.
     wizard_motd      - shown to wizards when they connect in addition to
                        the motd file.

  Related Topics: @readcache, badsite_file, connect_file, connect_reg_file,
                  down_file, guest_file, motd_file, newuser_file, quit_file,
                  register_create_file, wizard_motd_file.

& @LOCK
@LOCK

  COMMAND: @lock <object>=<key>

  Note that with attribute locking, a WIZARD object can read any attribute of
  any object, including attributes invisible to players.

  Player #1 may also make attribute locks of the form <attr-num>:<value>
  Note that if <attr-num> is not a valid attribute number, the lock will
  never succeed.

& @LOG
@LOG

  COMMAND: @log <file>=<message>

  This logs the message (without timestamp) to the named file. Pathnames
  are stripped, and the file resides in 'game/logs' under the name
  'M-<file>.log'.

  The file must already exist for the @log request to succeed, and can only
  be created at the MUX account shell.

& @MARK
@MARK

  COMMAND: @mark[/<switches>] [<player>] [<class>=<restriction>]

  Sets or clears the MARKED flags for objects that match the search criteria.
  This command may only be used when database cleaning is disabled (via
  @disable cleaning), as cleaning uses the MARKED flag to check
  connectivity.

  The following switches are available:

     /set    - (default) Set the MARKED flag on the selected objects.
     /clear  - Clear the MARKED flag on the selected objects.

  Related Topics: @apply_marked, @mark_all, MARKED, SEARCH CRITERIA.

& @MARK_ALL
@MARK_ALL

  COMMAND: @mark_all[/<switches>]

  Sets or clears the MARKED flag for all objects in the database.  This
  command may only be used when database cleaning is disabled (via @disable
  cleaning), as cleaning uses the MARKED flag to check connectivity.

  The following switches are available:

     /set    - (default) Set the MARKED flag on all objects.
     /clear  - Clear the MARKED flag on all objects.

  Related Topics: @apply_marked, @mark_all, MARKED.

& @MOTD
@MOTD

  COMMAND: @motd[/<switches>] <message>

  This command sets or lists short messages that are displayed to players
  after they successfully log in to the game (or after they fail because
  logins are not allowed).  These messages are displayed in addition to
  the contents of the motd.txt and wizmotd.txt files.

  The following switches are available:

     (No switches)   - Sets the message that all players see when they
                       connect.
     /wizard         - Sets the message that wizards see when they connect.
     /down           - Sets the message the players see when they try to
                       connect, but fail because logins are disabled.
     /full           - Sets the message that players see when they try to
                       connect, but fail because there are too many players
                       already connected.
     /list           - Lists the current messages.

  Related Topics: @listmotd.

& @NEWPASSWORD
@NEWPASSWORD

  COMMAND: @newpassword <player>[=<newpassword>]

  Gives <player> the new password <newpassword>.  If <newpassword> is not
  specified, the player is given a null password.  If logged in, the player
  is notified that his password has been changed.

  Related Topics: @password.

& @PCREATE
@PCREATE

  COMMAND: @pcreate <player>=<password>

  Creates a new player with the indicated password.  This command is
  equivalent to typing 'create <player> <password>' from the connection
  screen, and is normally only used when registration is enabled.

  Related Topics: REGISTRATION.

& @POOR
@POOR

  COMMAND: @poor <amount>

  Sets the wealth of all players to <amount>.

& @PS
@PS

  COMMAND: @ps[/<switches>] [<object>]

  Wizards may also use the /all switch to view the entire queue.

  Related Topics: @ps (player version).

& @QUOTA
@QUOTA

  Command: @quota[/<switches>] [<player>[=<quota>]]
           @quota/all[/<switches>] [<quota>]]

  Lists or sets the player's (or everyone's) remaining or total quota
  according to the switches used.

  The following switches are available:

     /all       - Display or set the quota for all players.
     /fix       - Repair the remaining or total quota, assuming that the other
                  is correct.
     /remaining - Set or repair the remaining quota.
     /set       - Set the remaining or total quota to the specified value.
     /total     - Set or repair the total quota.

  Related Topics: QUOTAS.

& @READCACHE
@READCACHE

  COMMAND: @readcache

  Reads the commonly-used text files and re-indexes the help files into an
  internal cache.  Use this command whenever you change one of the game's
  text files.

& @RESTART
@RESTART

  COMMAND: @restart

  This command literally restarts the game. To the players, it appears as
  merely a short pause in the action. There are many reasons to @restart,
  including updating the source code, freeing built-up memory, etc.
  @restart dumps and reloads the database, so you cannot use it to change the
  database. You may recompile and use @restart to implement the changes
  without having to @shutdown.

  @restart maintains all connections, any relevant information about them
  across restarts. Nothing should be adversely affected by an @restart.
  However, it should be used sparingly due to the tedious nature of dumping
  and loading the database.

  NOTE: If you update the MUX binary with an outside binary, you should
  never overwrite the old one. Instead, you should delete or move it, and
  place the new binary in its place, for reasons beyond the scope of this
  document. This warning does not apply if you remake the binary in your
  game's source directory.

  Sending the MUX process a SIGUSR1 from the shell account will also cause a
  @restart.

& @RXLEVEL
@RXLEVEL

  COMMAND: @rxlevel <target>=<list>

  Sets or clears the Rx levels for the target. If a level name in list is
  prefixed with !, then the level is cleared.

  NOTE: This command is not available unless reality levels was enabled at
  compile-time.

  Example: @rxlevel *Joe=!Real Umbra

& @SHUTDOWN
@SHUTDOWN

  COMMAND: @shutdown <text>

  Disconnects all connected players, saves the database to disk, and shuts
  down the game.  The game is unavailable until it is restarted.  If an
  argument is specified, it is written to the file named by the status_file
  config directive.

  Related Topics: status_file

& @STARTSLAVE
@STARTSLAVE

  COMMAND: @startslave

  This command restarts the slave process that does user and hostname
  lookups. It should only be used it the slave process has locked up or died
  for some reason.

& @TIMECHECK
@TIMECHECK

  COMMAND: @timecheck[/<switches>]

  An accounting of how much total CPU time has been used to execute commands
  on each object.

  Win9x caveat:  Win9x does not provide a number of how much CPU time the
  MUX game server has consumed and so instead of CPU time, we use a
  high-resolution elapsed time instead. For some CPUs, the resolution of
  this clock can be as high as the processor itself, but as useful as this
  is, this accounting does not make a distinction between time spent in the
  server and time spent in another unrelated application.

  The command takes the following switches:

    /screen     Print information to the screen.
    /log        Print information to the logfile.
    /reset      Clear the counters.

  If no switches are provided, printing to the screen and clearing the
  counters are assumed. The counters are otherwise not cleared unless
  /reset is specified.

& @TIMEOUT
@TIMEOUT

  ATTRIBUTE: Timeout

  COMMAND: @timeout <object>[=<seconds>]

  Sets an idle timeout value on <object> that is different from the default
  value.  If the value is non-numeric or less than or equal to zero, then
  the default value is used.

  This attribute is only visible and settable by wizards.  It is only
  meaningful for players, and has no effect on other object types.

  Related Topics: idle_timeout.

& @TIMEWARP
@TIMEWARP

  COMMAND: @timewarp[/<switches>] <secs>

  Subtracts (or adds if negative) <secs> to one or more internal timers,
  depending on the switches specified from the following list:

     /check    - The time left until the next consistency check and database
                 cleaning.
     /dump     - The time left until the next automatic checkpoint dump.
     /idle     - The time left until the next check for idle users.
     /queue    - (default) Adjusts the time-to-execute for all entries in the
                 wait and semaphore queues.  Entries whose time-to-execute
                 becomes less than the current time are then ready for
                 execution. The contents of the object queue are also
                 appended to the player queue.

  Note: these flags may be specified together if desired.

  Related Topics: @list options.

& @TOAD
@TOAD

  COMMAND: @toad[/<switches>] <victim>[=<recipient>]

  Turns the victim into an object (a slimy toad) and disconnects them from
  the game.  The named recipient (or the @toading wizard) get ownership of
  all the victim's things, rooms, and exits, as well as of the toad object
  itself.

  The following switches are available:

    /no_chown - Don't change the ownership of the victim or his objects.

  Related Topics: @boot, @chownall, @destroy.

& @TXLEVEL
@TXLEVEL

  COMMAND: @txlevel <target>=<list>

  Sets or clears the Tx levels for the target. If a level name in list is
  prefixed with !, then the level is cleared.

  NOTE: This command is not available unless reality levels was enabled at
  compile-time.

  Example: @txlevel *Joe=Real !Umbra

& @WALL
@WALL

  COMMAND: @wall[/<switches>] <message>

  With no switches, shouts <message> to every connected player or to every
  connected wizard, prefixed by either 'Announcement:' (if for everyone) or
  'Broadcast:' (if for wizards).  The following switches can be used to get the
  described effects:

     /emit      - Format the message as an emit (ie send just <message>).
     /pose      - Format the message as a pose (ie <yourname> <message>).
     /wizard    - Only send the message to connected wizards.
     /admin     - Send the message to connected wizards and royalty.
     /no_prefix - Don't prepend 'Announcement:' or 'Broadcast:' to the message.

  If neither /emit or /pose are used, you can format the message one of several
  ways by specifying ':', ';', or '"' as the first character of the message.
  ':' and ';' format the message as if /pose were specified, except that ';'
  does not insert a space between your name and the message.  '"' formats the
  message in normal @wall format (this is the default).
  The message is also written to the log file.

& ACCESS
ACCESS

  CONFIG PARAMETER: access <command> <permlist>

  Modifies the permissions needed to execute the indicated command.
  Specifying a permission adds it to the list of permissions required; to
  remove a permission prefix it with a ! character.

  Related Topics: @list, logout_cmd_access, PERMISSIONS.

& ALIAS
ALIAS

  CONFIG PARAMETER: alias <new> <old>.

  Defines the command <new> to be an alias of the command <old>.

  Related Topics: function_alias, flag_alias.

& ALLOW_GUEST_FROM_REGISTERED_SITE
ALLOW_GUEST_FROM_REGISTERED_SITE

  CONFIG PARAMETER: allow_guest_from_registered_site
  DEFAULT: yes.

  With this option turned off, guests are not permitted to connect from
  sites which have been register_site'd.

  Game which use register_site as a more surgical version of forbid_site
  may be interested in turn this option off. However, game which are
  register_only will probably want to leave this option as defaulted.

  Related Topics: register_site, SITE LISTS

& ARTICLE_RULE
ARTICLE_RULE

  CONFIG PARAMETER: article_rule <article> <regular expression>
  DEFAULT: All articles default to a.

  article_rule adds a new rule to the list which the art function uses to
  determine which article to use for a particular word (either a or an). New
  rules are moved to the head of the rule-list so rules appearing later in the
  configuration will override rules at the beginning; hence the most general
  rules should come first followed by a set of exceptions. The art() function
  tests for matches  in order, so only the first matching rule counts.

  <article> is either 'a' or 'an' stating what article to give when art()
  matches input to a rule.

  <regular expression> is a regex which forms the body of the rule.

  For most games the default set of rules in the configuration files should be
  sufficient.

  Example:
    > @admin article_rule=an ^[aeiou]
    > @admin article_rule=an ^herb
    > say art(avocado)
    You say "an"
    > say art(head)
    You say "a"
    > say art(herb)
    You say "an"
    > say art(herbal)
    You say "an"

  Related topics: art(), regexps, @admin, config parameters.

& ATTRIBUTE PERMISSIONS
ATTRIBUTE PERMISSIONS

  The following attribute flags are available:

    const      - No one can change the attribute after the server starts.
    dark       - Attribute is not shown or readable to anyone but #1, but
                 anyone can potentially change it.
    deleted    - Attribute should be ignored.  It is not included in the
                 @dump.  Not recommended.  This appears to be a manual way to
                 accomplish @dbclean.
    god        - Only #1 can change the attribute.
    hidden     - Only WIZARDS can see it.  Dark to mortals.
    ignore     - Don't create a @ command for it.  Not recommended.
    internal   - Don't show even to #1.  Internal server bookkeeping.
    is_lock    - Attribute is a lock.  Not recommended.
    locked     - Attribute is locked.
    no_command - Don't process $-commands from this attribute.
    no_inherit - Not inherited by child objects.
    private    - Players other than owner can't see it.
    regexp     - Do a regexp rather than wildcard match.
    visual     - Anyone can see.
    wizard     - Only WIZARDS can change it.

  NOTE: There is a simple way to create attributes that are both 'wizard'
  and 'hidden'. Prefix the attribute name with an underscore (_) and the
  attribute can only be seen or edited by Wizards.

  Example:
    &_myattribute <player>=Only a Wizard can see or change this attribute.


  Related Topics: @attribute.

& ATTR_ACCESS
ATTR_ACCESS

  CONFIG PARAMETER: attr_access <attr> [!]<privilege> [[!]<privilege>]...

  Changes the access rights to the named attribute.

  The following privileges may be used:

  private     - The attribute is visible only to those who can examine the
                object.
  internal    - The attribute is not visible to anyone.
  wizard      - Only wizards may change the attribute.
  hidden      - The attribute is visible only to wizards.

  Related Topics:

& ATTR_ALIAS
ATTR_ALIAS

  CONFIG PARAMETER: attr_alias <alias> <attr>.

  Makes <alias> an alias for the attribute <attr>.

  Related Topics:

& ATTR_CMD_ACCESS
ATTR_CMD_ACCESS

  CONFIG PARAMETER: attr_cmd_access [!]<privilege> [[!]<privilege>]...

  Changes the access rights on all attribute-setting commands in parallel.
  Use this parameter to allow or deny access to the attribute-setting commands
  as a group.  This directive should normally be followed by access directives
  to properly set access to restricted attributes.

  Related Topics: access, PERMISSION.

& AUTOZONE
AUTOZONE

  CONFIG PARAMETER: autozone
  DEFAULT: Yes

  Whether newly-created objects are automatically of the same
  zone as their creator, or they are left zone-less.

  Related Topics:

& BADSITE_FILE
BADSITE_FILE

  CONFIG PARAMETER: badsite_file <path>
  DEFAULT: text/badsite.txt

  Specifies the name of the file that is sent to new net connections from
  sites that have been blocked from accessing the server.  The connection
  is closed immediately after the file is sent.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: forbid_site, permit_site.

& BAD_NAME
BAD_NAME

  CONFIG PARAMETER: bad_name <wildcarded-name>

  Specifies that any name that matches <wildcarded-name> may not be used as a
  player name.  Attempts to create a player with a disallowed name (or to
  rename to a disallowed name) will be rejected.  Normally, words that
  lead off messages from MUX are disallowed, some sites may wish to disallow
  some obscene names as well.

  Related Topics:

& CACHE_DEPTH
CACHE_DEPTH

  CONFIG PARAMETER: cache_depth <depth>
  DEFAULT: none.

  This option is obsolete. The cache in MUX 2.0 is controlled differently.

  Related Topics: max_cache_size

& CACHE_NAMES
CACHE_NAMES

  CONFIG PARAMETER: cache_names
  DEFAULT: Yes

  Whether or not to use object name caches.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics:

& CACHE_PAGES
CACHE_PAGES

  CONFIG PARAMETER: cache_pages <num>
  DEFAULT: 40

  Specifies the size of the hashpage cache.  This configuration option cannot
  be changed after the server starts.  It can only be changed via the
  configuration file.

  The most effective type of caching occurs one level higher (see
  max_cache_size), however for larger games, it is necessary to increase
  cache_pages as well (which caches at a lower level).

  Recommendations:

   -- Have at least 10 hash pages or the server itself will thrash the cache.

   -- Have one cache page for every active player, or simple paging will
      thrash the cache.

  The default of 40 will perform well up to 100 players.

  Related Topics: cache_pages, max_cache_size.

& CACHE_TICK_PERIOD
CACHE_TICK_PERIOD

  CONFIG PARAMETER: cache_tick_period <seconds>
  DEFAULT: 30.0

  Specifies the cache maintenance period in seconds.  Currently, cache
  maintenance only involves flushing dirty pages.  With a short period,
  the work is spread out more evenly.  Therefore, a short period is
  usually best for large games.

  Related Topics: cache_pages, max_cache_size.

& CACHE_TRIM
CACHE_TRIM

  CONFIG PARAMETER: cache_trim <yes/no>
  DEFAULT: none.

  This option is obsolete. The cache in MUX 2.0 is controlled differently.

  Related Topics: max_cache_size

& CACHE_WIDTH
CACHE_WIDTH

  CONFIG PARAMETER: cache_width <depth>
  DEFAULT: none.

  This option is obsolete. The cache in MUX 2.0 is controlled differently.

  Related Topics: max_cache_size

& CAUTIONS
CAUTIONS

  The @force command evaluates its argument before putting it on the queue.
  Therefore, any ';' characters resulting from the evaluation that are
  outside of any nested delimiters will cause what follows to be treated
  as a separate command.

& CHECK_INTERVAL
CHECK_INTERVAL

  CONFIG PARAMETER: check_interval <secs>
  DEFAULT: 600.

  Specifies how often (in seconds) the database is to be automatically
  scanned for inconsistencies and purged of references to destroyed objects.
  Any inconsistencies found are either fixed or recorded in the log file.

  Related Topics: check_offset, @dbck.

& CHECK_OFFSET
CHECK_OFFSET

  CONFIG PARAMETER: check_offset <secs>
  DEFAULT: 300.

  Specifies how long after startup the first automatic database check is
  to be performed.  Subsequent checks are performed every check_interval
  seconds.

  Related Topics: check_interval, @dbck.

& CLONE_COPIES_COST
CLONE_COPIES_COST

  CONFIG PARAMETER: clone_copies_cost <yes/no>
  DEFAULT: NO

  Indicates whether or not @cloned objects inherit the cost of the original.
  If disabled, @cloned objects cost the same as a @create that doesn't specify
  the object cost.  The new owner is charged the correct amount in either
  case.

  Related Topics: @clone.

& COMMANDS
COMMANDS

  Help is available for the following MUX commands:

  DOING          examine        give           SESSION        slay
  WHO            wizhelp

  @addcommand    @admin         @apply_marked  @attribute     @backup
  @boot          @chown         @chownall      @clone         @cut
  @dbck          @dbclean       @delcommand    @destroy       @disable
  @doing         @dump          @enable        @fixdb         @flag
  @function      @halt          @hook          @icmd          @kick
  @list          @listcommands  @list_file     @listmotd      @lock
  @log           @mark          @mark_all      @motd          @newpassword
  @pcreate       @poor          @ps            @quota         @readcache
  @restart       @shutdown      @startslave    @timecheck     @timewarp
  @toad          @wall

  @allowance     @comment       @timeout

& COMMAND_QUOTA_INCREMENT
COMMAND_QUOTA_INCREMENT

  CONFIG PARAMETER: command_quota_increment <amount>
  DEFAULT: 1

  Specifies the number of commands by which the command quota for connected
  users each timeslice.  Each command a user types in (commands executed by
  machines do not count) decreases the quota by 1, and the user's commands are
  only executed if the quota is greater than zero.

  Related Topics: command_quota_max, timeslice.

& COMMAND_QUOTA_MAX
COMMAND_QUOTA_MAX

  CONFIG PARAMETER: command_quota_max <amount>
  DEFAULT: 100

  Specifies the maximum value for the command quota for connected users.
  A user's command quota is only increased if it is below this value.
  Each command a user types in (commands executed by machines do not count)
  decreases the quota by 1, and the user's commands are only executed if the
  quota is greater than zero.

  Related Topics: command_quota_increment, timeslice.

& COMPRESSION
COMPRESSION

  CONFIG PARAMETER: compress <yes/no>
  DEFAULT: no

  Indicates whether or not the database is to be compressed using the
  compress_program when it is written, and whether or not to check for a
  compressed database to uncompress at startup.

  Related Topics: compress_program, uncompress_program.

& COMPRESS_PROGRAM
COMPRESS_PROGRAM

  CONFIG PARAMETER: compress_program <path>
  DEFAULT: gzip

  Specifies the program to be run to compress the database file when it is
  written.  If database file compression is enabled, database dumps are piped
  through this program on their way out to disk.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: compression, uncompress_program.

& COMSYS_DATABASE
COMSYS_DATABASE

  CONFIG PARAMETER: comsys_database <path>
  DEFAULT: comsys.db

  Specifies the file that comsystem and macro information is stored in.
  This database is loaded at startup if have_comsys is on.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: have_comsys.

& CONFIG PARAMETERS
CONFIG PARAMETERS

  The following configuration parameters may be specified in the configuration
  file, or given to the @admin command.  Type 'wizhelp <param>' for help on a
  particular parameter.

  access  alias  allow_guest_from_registered_site  article_rule  attr_access
  attr_alias  attr_cmd_access  autozone  bad_name  badsite_file  cache_names
  cache_pages  cache_tick_period  check_interval  check_offset
  clone_copies_cost  command_quota_increment  command_quota_max
  compress_program  compression  comsys_database  config_access  conn_timeout
  connect_file  connect_reg_file  crash_database  create_max_cost
  create_min_cost  dark_sleepers  def_exit_rx  def_exit_tx  def_player_rx
  def_player_tx  def_room_rx  def_room_tx  def_thing_rx  def_thing_tx
  default_home  destroy_going_now  dig_cost  down_file  down_motd_message
  dump_interval  dump_message  dump_offset  earn_limit  eval_comtitle
  events_daily_hour  examine_flags  examine_public_attrs  exit_flags
  exit_quota  fascist_teleport  find_money_chance  fixed_home_message
  fixed_tel_message  flag_access  flag_alias  flag_name  float_precision
  forbid_site  fork_dump  full_file  full_motd_message  function_access
  function_alias  function_invocation_limit  function_recursion_limit
  game_dir_file  game_pag_file  global_error_obj  good_name  guest_char_num

{ 'wizhelp config parameters2' for more }

& CONFIG PARAMETERS2
CONFIG PARAMETERS (continued)

  guest_file  guest_nuker  guest_prefix  guest_site  guests_channel
  guests_channel_alias  have_comsys  have_mailer  have_zones  helpfile
  hook_cmd  hook_obj  hostnames  idle_interval  idle_timeout  idle_wiz_dark
  immobile_message  include  indent_desc  initial_size  input_database
  kill_guarantee_cost  kill_max_cost  kill_min_cost  lag_limit  lag_maximum
  lbuf_size  link_cost  list_access  lock_recursion_limit  log  log_options
  logout_cmd_access  logout_cmd_alias  look_obey_terse  machine_command_cost
  mail_database  mail_ehlo  mail_expiration  mail_per_hour  mail_sendaddr
  mail_sendname  mail_server  mail_subject  master_room  match_own_commands
  max_cache_size  max_players  min_guests  money_name_plural
  money_name_singular  motd_file  motd_message  mud_name  newuser_file
  nositemon_site  notify_recursion_limit  number_guests  open_cost
  output_database  output_limit  page_cost  paranoid_allocate
  parent_recursion_limit  paycheck  pcreate_per_hour  pemit_any_object
  pemit_far_players  permit_site  player_flags  player_listen
  player_match_own_commands  player_name_spaces  player_queue_limit
  player_quota  player_starting_home  player_starting_room  port
  postdump_message  power_alias  public_channel  public_channel_alias
  public_flags  pueblo_message  queue_active_chunk  queue_idle_chunk
  quiet_look  quiet_whisper  quit_file  quotas  raw_helpfile  read_remote_desc
  read_remote_name  reality_level  register_create_file  register_site

{ 'wizhelp config parameters3' for more }

& CONFIG PARAMETERS3
CONFIG PARAMETERS (continued)

  reset_players  restrict_home  retry_limit  robot_cost  robot_flags
  robot_speech  room_flags  room_quota  run_startup  sacrifice_adjust
  sacrifice_factor  safe_wipe  safer_passwords  search_cost  see_owned_dark
  signal_action  site_chars  space_compress  sql_database  sql_password
  sql_server  sql_user  stack_limit  starting_money  starting_quota
  status_file  stripped_flags  suspect_site  sweep_dark  switch_default_all
  terse_shows_contents  terse_shows_exits  terse_shows_move_messages
  thing_flags  thing_quota  timeslice  toad_recipient  trace_output_limit
  trace_topdown  trust_site  uncompress_program  unowned_safe
  user_attr_access  user_attr_per_hour  wait_cost  wiz_always_real
  wizard_motd_file  wizard_motd_message  zone_recursion_limit

& CONFIG_ACCESS
CONFIG_ACCESS

  CONFIG PARAMETER: config_access <param> [!]<privilege> [[!]<privilege>]...

  Changes the privileges needed to change the specified configuration
  parameter.  The value 'disabled' indicates that the parameter may only be
  specified in the configuration file at startup.

  The privilege of the @admin command is controlled separately via the
  access directive.  It is therefore ineffective to reduce the privilege of a
  configuration option without also reducing the privilege of @admin to at
  least the same level.

  Related Topics: access, @admin, @list config_permissions, PERMISSIONS.

& CONNECT_FILE
CONNECT_FILE

  CONFIG PARAMETER: connect_file <path>
  DEFAULT: text/connect.txt

  Specifies the name of the file that a user sees immediately after connecting
  to the MUX if registration is not enabled.  This file normally contains
  help on how to connect to or create a character, as well as the WHO and QUIT
  commands.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: connect_reg_file

& CONNECT_REG_FILE
CONNECT_REG_FILE

  CONFIG PARAMETER: connect_reg_file <path>
  DEFAULT: text/register.txt

  Specifies the name of the file that a user sees immediately after connecting
  to the MUX if registration is enabled.  This file normally contains
  help on how to get a character (usually by sending e-mail to one of the
  wizards), how to connect to an existing character, as well as the WHO and
  QUIT commands.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: connect_file

& CONN_TIMEOUT
CONN_TIMEOUT

  CONFIG PARAMETER: conn_timeout <num>
  DEFAULT: 60

  If greater than zero, this parameter determines how many seconds a new
  network connection may remain open while connecting to a character before
  being automatically disconnected.

  If zero or negative, this parameter effectively disables login-time
  connection timeouts. While supported, disabling login-time connections is
  not recommended.

  Related Topics: idle_interval, idle_timeout.

& CONTACT INFO
CONTACT INFO

  Put information about how to contact the wizards and game maintainer
  in here so they can contact one another when the game is down.

& CRASH_DATABASE
CRASH_DATABASE

  CONFIG PARAMETER: crash_database <path>
  DEFAULT: <input db>.CRASH

  Specifies the name of the database file that should be written when MUX
  detects an internal error and is about to crash. The file is generated
  in flatfile format with attribute values included.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

& CREATE_MAX_COST
CREATE_MAX_COST

  CONFIG PARAMETER: create_max_cost <amount>
  DEFAULT: 505

  Specifies the maximum amount of money that is used in calculating the value
  of a created object.  Specifying more than this amount of money in a @create
  command will cause the excess to be wasted.

  Related Topics: create_min_cost, sacrifice_adjust, sacrifice_factor.

& CREATE_MIN_COST
CREATE_MIN_COST

  CONFIG PARAMETER: create_min_cost <amount>
  DEFAULT: 10

  Specifies the minimum (and default) cost for creating an object.

  Related Topics: create_max_cost, sacrifice_adjust, sacrifice_factor.

& DARK_SLEEPERS
DARK_SLEEPERS

  CONFIG PARAMETER: dark_sleepers <yes/no>
  DEFAULT: yes

  Indicates whether or not disconnected players are to be considered 'dark',
  so that they do not show up when a player looks in the room that they are
  in.  Disconnected players can still be found by examining the room or by
  using [next()] to follow the contents chain for the room.

& DEBUG FEATURES
DEBUG FEATURES

  This topic intentionally left blank.

& DEFAULT_HOME
DEFAULT_HOME

  CONFIG PARAMETER: default_home <location>
  DEFAULT: (player_starting_home)

  Sets the home location for objects which have an invalid home (whether
  because the home location was deleted, or is owned by another player and
  is not set ABODE) and the home of their owner is also invalid.  If this
  parameter is not set, the value of player_starting_home is used instead.

  Related Topics: player_starting_home.

& DEF_EXIT_RX
DEF_EXIT_RX

  CONFIG PARAMETER: def_exit_rx <value>
  DEFAULT: 1

  Sets the default Rx level for a newly created exit.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& DEF_EXIT_TX
DEF_EXIT_TX

  CONFIG PARAMETER: def_exit_rx <value>
  DEFAULT: 1

  Sets the default Tx level for a newly created exit.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& DEF_PLAYER_RX
DEF_PLAYER_RX

  CONFIG PARAMETER: def_player_rx <value>
  DEFAULT: 1

  Sets the default Rx level for a newly created player.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& DEF_PLAYER_TX
DEF_PLAYER_TX

  CONFIG PARAMETER: def_player_tx <value>
  DEFAULT: 1

  Sets the default Tx level for a newly created player.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& DEF_ROOM_RX
DEF_ROOM_RX

  CONFIG PARAMETER: def_room_rx <value>
  DEFAULT: 1

  Sets the default Rx level for a newly created room.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& DEF_ROOM_TX
DEF_ROOM_TX

  CONFIG PARAMETER: def_room_tx <value>
  DEFAULT: all (-1)

  Sets the default Tx level for a newly created exit.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& DEF_THING_RX
DEF_THING_RX

  CONFIG PARAMETER: def_thing_rx <value>
  DEFAULT: 1

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& DEF_THING_TX
DEF_THING_TX

  CONFIG PARAMETER: def_thing_tx <value>
  DEFAULT: 1

  Sets the default Tx level for a newly created object.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& DESTROY_GOING_NOW
DESTROY_GOING_NOW

  CONFIG PARAMETER: destroy_going_now [yes/no]
  DEFAULT: No

  By default, @destroy only queues an object for destruction on the news
  auto-@dbck cycle. However, if this configuration option is enabled, a
  second @destroy on a previously queued request causes the destruction to
  occur immediately.

  This behavior is for compatibility with PennMUSH.

& DIG_COST
DIG_COST

  CONFIG PARAMETER: dig_cost <amount>
  DEFAULT: 1

  Specifies how much the @dig command costs.

& DOING
DOING

  COMMAND: DOING <prefix>

  This command is very similar to the mortal WHO command (the wizard WHO
  command returns different information).  When run by a wizard, the DOING
  command reports additional information about the player in the form of flag
  letters between the idle time and the players' Doing string.  The following
  letters may be present:

  D - Player is set DARK.
  d - Player is not shown on the WHO list because they have been idle for
      longer than the default inactivity timeout and the idle_dark_wiz
      configuration parameter has been turned on. (only if not D)
  U - Player is set UNFINDABLE.
  u - Player is in an UNFINDABLE location (only if not U).
  + - Player is set SUSPECT.

  Related Topics: SESSION, WHO, DARK, UNFINDABLE, SUSPECT, idle_dark_wiz.

& DOWN_FILE
DOWN_FILE

  CONFIG PARAMETER: down_file <pathname>.
  DEFAULT: text/down.txt

  Specifies the name of the file that is displayed when players attempt to
  connect to a non-wizard character when logins are disabled.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: @disable, down_motd_message.

& DOWN_MOTD_MESSAGE
DOWN_MOTD_MESSAGE

  CONFIG PARAMETER: down_motd_message <message>
  DEFAULT: text/down.txt

  Sets the message that is displayed when a player attempts to connect to a
  non-wizard character when logins are disabled.  This message is displayed
  in addition to the contents of the down.txt file.

  Related Topics: @disable, down_motd_file.

& DUMP_INTERVAL
DUMP_INTERVAL

  CONFIG PARAMETER: dump_interval <amount>
  DEFAULT: 3600

  Specifies the time in seconds between automatic database dumps.

  Related Topics: dump_offset, output_database.

& DUMP_MESSAGE
DUMP_MESSAGE

  CONFIG PARAMETER: dump_message <message>
  DEFAULT: blank

  Sets the message that is sent to everyone before the database is being
  dumped to disk, whether automatically or via the @dump command.

  Related Topics: @dump, postdump_message.

& DUMP_OFFSET
DUMP_OFFSET

  CONFIG PARAMETER: dump_offset <amount>
  DEFAULT: 0

  Specifies the time in seconds between startup and the first database dump.
  If zero, the value of the dump_interval parameter is used.

  Related Topics: dump_interval.

& EARN_LIMIT
EARN_LIMIT

  CONFIG PARAMETER: earn_limit <amount>
  DEFAULT: 10000

  Specifies the threshold at which earning additional money becomes
  difficult.  Specifically, players with more than this much money no longer
  receive a paycheck for each day they connect, don't receive insurance
  payments for being killed, and don't find money lying in the streets.

  Related Topics: find_money_chance, paycheck.

& EVAL_COMTITLE
EVAL_COMTITLE

  CONFIG PARAMETER: eval_comtitle <yes/no>
  DEFAULT: yes

  Specifies whether or not comtitles are evaluated as code each time
  a pose is made on channel.

& EVENTS_DAILY_HOUR
EVENTS_DAILY_HOUR

  CONFIG PARAMETER: events_daily_hour <hour>
  DEFAULT: 7

  Specifies the hour that @daily is executed. No guarantee is made as to what
  time during this hour it is executed. This should be a integer between 0 and
  23.

& EXAMINE
EXAMINE

  COMMAND: examine[/<switches>] [<object>]

  Wizards may use the /debug switch to see additional information about the
  object.  The Owner, Exits, Next, and Contents fields of the object are
  shown in numeric form only, and an attribute list is included.

& EXAMINE_FLAGS
EXAMINE_FLAGS

  CONFIG PARAMETER: examine_flags <yes/no>
  DEFAULT: yes

  Indicates whether or not the examine command should include an expanded
  flags list in the description of the object.

  Related Topics: examine.

& EXAMINE_PUBLIC_ATTRS
EXAMINE_PUBLIC_ATTRS

  CONFIG PARAMETER: examine_public_attrs <yes/no>
  DEFAULT: yes

  Indicate whether or not the examine command should display the public
  attributes of the object by default when used by a player who does not
  control the object.  Regardless of the setting of this parameter, the
  short form is available with examine/brief and the long form with
  examine/long.

  Related Topics: examine.

& EXIT_FLAGS
EXIT_FLAGS

  CONFIG PARAMETER: exit_flags <flags>
  DEFAULT: blank

  Modifies the set of flags that an exit receives when it is created via the
  @open command or via the optional exit creation parameters of the @dig or
  @link commands.  Flags prefixed by a ! remove the indicated flag from the
  set.

  Related Topics: @list, player_flags, robot_flags, room_flags, thing_flags.

& EXIT_QUOTA
EXIT_QUOTA

  CONFIG PARAMETER: exit_quota <amount>
  DEFAULT: 1

  Sets how much quota it costs to create an exit (and also how much the
  remaining quota is increased when an exit is @destroyed.

  Related Topics: @quota, player_quota, room_quota, thing_quota, QUOTAS.

& FASCIST_TELEPORT
FASCIST_TELEPORT

  CONFIG PARAMETER: fascist_teleport <yes/no>
  DEFAULT: no

  If this parameter is set to yes, then players (and objects) may not
  teleport out of locations that they do not control or which are not set
  JUMP_OK.  If the teleporting player is inside an object, the room that
  ultimately contains the object is checked.  Going home is unaffected.

& FILES
FILES

  TinyMUX uses these files (normally kept in the same directory as the
  database files and the netmux program) to display information under
  certain circumstances.  The names of the files used can be changed with
  configuration directives (or on the netmux command line, in the case of
  netmux.conf).

  badsite.txt:    Displayed when someone connects from a site that is not
                  allowed to connect.  The connection is then closed.
  connect.txt:    Displayed when someone connects from a site for which
                  registration is not enabled.
  create_reg.txt: Displayed when someone tries to 'create' a character from
                  a site for which registration is enforced.
  down.txt:       Displayed when someone tries to connect to a non-wizard
                  character when logins are disabled.
  help.txt:       File containing information displayed by the help command.

{ 'wizhelp files2' for more }

& FILES2
FILES (continued)

  guest.txt:      Displayed to whoever connects to the guest character
                  specified by the guest_character config parameter.
  motd.txt:       Displayed after someone connects to an existing character.
  netmux.conf:    Configuration directives read at startup.
  news.txt:       File containing information displayed by the news command.
  newuser.txt:    Displayed after someone creates a new character or connects
                  to their character for the first time.
  quit.txt:       Displayed after someone QUITs but before the net connection
                  is closed.
  register.txt:   Displayed when someone connects from a site for which
                  registration is enabled.
  wizhelp.txt:    File containing information displayed by the wizhelp
                  command.
  wizmotd.txt:    Displayed to wizards when they connect to their characters.

  Related Topics: badsite_file, connect_file, connect_reg_file, down_file,
                  guest_file, helpfile, raw_helpfile, motd_file, newuser_file,
                  quit_file, register_create_file, wizard_motd_file.

& FIND_MONEY_CHANCE
FIND_MONEY_CHANCE

  CONFIG PARAMETER: find_money_chance <amount>
  DEFAULT: 0

  Indicates the chance that players have of finding money when entering a
  new room.  The chance is 1 / find_money_chance, except that finding money
  is disabled if this parameter is set to zero.

  Related Topics: earn_limit, paycheck.

& FIXED_HOME_MESSAGE
FIXED_HOME_MESSAGE

  CONFIG PARAMETER: fixed_home_message <string>
  DEFAULT: none

  Specifies the string that is sent to a player when they try to go home
  while they are set with the FIXED flag.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: fixed_tel_message, immobile_message.

& FIXED_TEL_MESSAGE
FIXED_TEL_MESSAGE

  CONFIG PARAMETER: fixed_tel_message <string>
  DEFAULT: none

  Specifies the string that is sent to a player when they try to teleport
  while they are set with the FIXED flag.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: fixed_home_message, immobile_message.

& FLAGS
FLAGS

  Information is available on the following flags:

  INHERIT(i)         MARKED(m)          STARTUP(z)         SUSPECT(u)
  WIZARD(W)

& FLAG_ACCESS
FLAG_ACCESS

  CONFIG PARAMETER: flag_access <flag name> <access>

  Changes who can set a flag. <access> can be:

  any             - Anyone can set this flag.
  god             - Only God can set this flag.
  privileged      - Only God can set this flag on players, but non-robot
                    players can set it on objects of other types, if
                    they themselves have the flag.
  restrict_player - Only Wizards can set this flag on players, but
                    mortals can set the flag on objects of other types.
  royalty         - Only Royalty, Wizards, and God can set this flag.
  staff           - Only Staff, Royalty, Wizards, and God can set this flag.
  wizard          - Only Wizards and God can set this flag.

  There are some flags whose access permissions cannot be changed,
  since they are handled in a special way. This includes the DARK,
  and AUDIBLE flags.

& FLAG_ALIAS
FLAG_ALIAS

  CONFIG PARAMETER: flag_alias <alias> <flagname>

  Defines <alias> as a synonym for the flag <flagname>.

  Related Topics: alias, function_alias.

& FLAG_NAME
FLAG_NAME

  Config parameter: flag_name <oldflagname> <newflagname>

  Redefines what the given flag is called.  This config parameter is only
  useable within the conf file.  Use @flag to change them online.

  Related Topics: @flag

& FLOAT_PRECISION
FLOAT_PRECISION

  CONFIG PARAMETER: float_precision <places>
  DEFAULT: -1

  When enabled (by setting to a non-negative number), TinyMUX uses the useful
  subset approach for floating-point results, and the precision of these
  results are limited to the specified number of <places>. For compatibility
  with existing softcode, a value of 6 may be necessary. 

  By default, this option is disabled, and TinyMUX uses the full set approach
  for floating-point results.

  Related Topics:

& FORBID_SITE
FORBID_SITE

  CONFIG PARAMETER: forbid_site <site>

  Indicates that connections are to be rejected from sites whose address
  matches the specified sit.  The contents of the file specified by
  badsite_file is sent immediately before closing the connection.  This
  directive may be used to restrict access to just the local network, or to
  prevent access from troublemaking sites.  The default is for all sites to
  be allowed to connect, none forbidden.

  Related Topics: badsite_file, permit_site, register_site, guest_site,
                  SITE LISTS, SITE NOTATION,

& FORK_DUMP
FORK_DUMP

  CONFIG PARAMETER: fork_dump <yes/no>
  DEFAULT: yes

  Indicates whether or not database dumps are to be done by fork()ing off a
  separate process to perform the dump.  While enabling this parameter reduces
  the amount of time needed to perform the dump, it requires that the system
  have enough free swap space to hold a second copy of the running game.

  Related Topics:

& FULL_FILE
FULL_FILE

  CONFIG PARAMETER: full_file <pathname>
  DEFAULT: text/full.txt

  Specifies the name of the file that is displayed when players attempt to
  connect to a non-wizard character when the number of connected players
  is not less than the number of players allowed by the max_players directive.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: full_motd_message, max_players.

& FULL_MOTD_MESSAGE
FULL_MOTD_MESSAGE

  CONFIG PARAMETER: full_motd_message <message>
  DEFAULT: blank

  Sets the message that is displayed when a player attempts to connect to a
  non-wizard character when the number of connected players is not less than
  the number of players allowed by the max_players directive.  This message is
  displayed in addition to the contents of the full.txt file.

  Related Topics: down_motd_file, max_players.

& FUNCTION_ACCESS
FUNCTION_ACCESS

  CONFIG PARAMETER: function_access <function> [!]<priv> [[!]<priv>]...

  Changes the privileges needed to call the MUX function <function>.
  If you do not have permission to call a function, the function
  returns the value "#-1 PERMISSION DENIED" instead of the value it
  would normally return.

  Related Topics: @list functions, FUNCTION LIST, PERMISSIONS.

& FUNCTION_ALIAS
FUNCTION_ALIAS

  CONFIG PARAMETER: function_alias <alias> <funcname>

  Defines <alias> as a synonym for the function <funcname>.

  Related Topics: alias, flag_alias.

& FUNCTION_INVOCATION_LIMIT
FUNCTION_INVOCATION_LIMIT

  CONFIG PARAMETER: function_invocation_limit <num>
  DEFAULT: 2500

  This directive sets the maximum number of times that a command may make
  function calls.  If the invocation limit is exceeded, the string
  '#-1 FUNCTION INVOCATION LIMIT EXCEEDED' is returned.  This limit is
  intended to prevent long hangs from creative uses of u() and iter().
  Note: @search is treated specially, each object examined with the
  eval=<arg> parameter is treated as a separate command for the purposes
  of the function invocation limit.

& FUNCTION_RECURSION_LIMIT
FUNCTION_RECURSION_LIMIT

  CONFIG PARAMETER: function_recursion_limit <num>
  DEFAULT: 50

  This directive sets the maximum number of nested function calls that
  may be made before the function call is aborted and the string
  '#-1 FUNCTION RECURSION LIMIT EXCEEDED' is returned.  Normally this is not
  a problem, but the u() function can be used to cause infinite recursion
  (unless blocked by a recursion limit)

& GAME_DIR_FILE
GAME_DIR_FILE

  CONFIG PARAMETER: game_dir_file <path>

  This configuration option specifies the file name of the 'directory' portion
  of the CHashFile attribute database. If this file is deleted, CHashFile will
  automatically re-created it.

  It is read into memory at startup and re-written during page splits in the
  'pages' portion of the database.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: game_pag_file

& GAME_PAG_FILE
GAME_PAG_FILE

  CONFIG PARAMETER: game_pag_file <path>

  This configuration option specifies the file name of the 'pages' portion of
  the CHashFile attribute database. Unlike the 'directory' portion, this
  portion cannot be replaced. Attribute values themselves are stored in this
  file.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: game_dir_file

& GDBM_DATABASE
GDBM_DATABASE

  CONFIG PARAMETER: gdbm_database <path>

  MUX 2.0 maintains a database in a different way. This configuration
  option is obsolete.

  Related Topics: game_dir_file, game_pag_file

& GIVE
GIVE

  COMMAND: give[/<switches>] <who> = <what>

  Wizards may use the /quiet switch to suppress the 'You give X to P' and
  'P gave you X' messages.  Other messages related to giving objects
  (such as the xDROP and XSUCC attributes on the object being given, or
  error messages) are not suppressed.

& GLOBAL_ERROR_OBJ
GLOBAL_ERROR_OBJ

  CONFIG PARAMETER: global_error_obj <dbref>
  DEFAULT: -1

  Specifies the object that it looks for, to evaluate an attribute
  whenever a 'Huh? (Type 'help' for help)' would have shown up.
  The attribute is the VA attribute (settable by @va or &va), and
  will evaluate like you would in a @pemit, think, or other command.
  The enactor is %#, though it is evaluated by the object itself.
  This _CAN_ be a security risk if not done properly, but is done
  that way on purpose.  The string they typed will be passed as %0.
  It will be unevaluated and 'as-is'.

  Why the VA attribute?  Why not?  I felt it was being all alone
  and left out of the fun ;)

  Original code and helpfile from RhostMUSH. Used with permission.

  Example:
    > @admin global_error_obj=10
    Set.
    > @va #10=[pemit(%#,You typed '%0')]
    Set.
    > @pemit me=Test
    Test
    > @pmit me=Test
    You typed '@pmit me=Test'

  Related Topics:

& GOOD_NAME
GOOD_NAME

  CONFIG PARAMETER: good_name <name>

  Removes <name> from the list of names that may not be used as a player
  name, reversing the effect of a bad_name directive.  The name must match
  exactly (wildcard matching is not performed).

& GUESTS_CHANNEL
GUESTS_CHANNEL

  CONFIG PARAMETER: guests_channel <name>
  DEFAULT: Guests

  Specifies the name of the channel that guests join when they connect. You
  must have created the channel already. To disable this feature, simply set
  this parameter to nothing.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: guests_channel_alias, public_channel, public_channel_alias

& GUESTS_CHANNEL_ALIAS
GUESTS_CHANNEL_ALIAS

  CONFIG PARAMETER: guests_channel_alias <name>
  DEFAULT: g

  Specifies the name of the channel alias that guests are assigned when they
  connect.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: guests_channel_alias, public_channel, public_channel_alias

& GUEST_CHAR_NUM
GUEST_CHAR_NUM

  CONFIG PARAMETER: guest_char_num <number>
  DEFAULT: (none)

  Indicates the database reference number of the guest character.  If set,
  the specified guest character is subject to additional restrictions (such
  as not being allowed to create or destroy objects).  The actual
  restrictions can be changed with the access config parameter using the
  no_guest permission.

  This configuration parameter is the main on/off switch for the MUX guest
  system, so in that respect it corresponds to the have_comsys and have_mailer
  configuration options.  The guest system in MUX is effectively disabled
  until this configuration parameter is set.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: guest_prefix, guest_nuker, number_guests, access,
                  min_guests, guest_site.

& GUEST_FILE
GUEST_FILE

  CONFIG PARAMETER: guest_file <path>
  DEFAULT: text/guest.txt

  Specifies the file that is to be shown to people connecting to the
  guest character in place of the motd file.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: guest_char_num.

& GUEST_NUKER
GUEST_NUKER

  CONFIG PARAMETER: guest_nuker <num>
  DEFAULT: 1

  Specifies who is to nuke guests when they log off. If it is not a good
  object or a wizard, it defaults to #1.

  Related Topics: guest_char_num, guest_prefix, number_guests, min_guests,
                  guest_site.

&GUEST_PREFIX
GUEST_PREFIX

  CONFIG PARAMETER: guest_prefix <name>
  DEFAULT: Guest

  Specifies the prefix for all guests. This will be what is put before the #
  when the guest is created. This will also be what is used to connect to
  the guests on your system.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: guest_char_num, number_guests, min_guests, guest_site.

& GUEST_SITE
GUEST_SITE

  CONFIG PARAMETER: guest_site <site>

  Indicates that connections to guests from this site should be rejected.
  Players will be able to connect normally and create if set.

  Related Topics: badsite_file, permit_site, register_site, forbid_site,
                  SITE LISTS, SITE NOTATION,
                  allow_guest_from_registered_site.

& HAVE_COMSYS
HAVE_COMSYS

  CONFIG PARAMETER: have_comsys <yes/no>
  DEFAULT: yes

  Specifies whether or not the comsystem should be active.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: comsys_database.

& HAVE_MAILER
HAVE_MAILER

  CONFIG PARAMETER: have_mailer <yes/no>
  DEFAULT: yes

  Specifies whether @mail and mail aliases should be active.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: mail_database

& HAVE_ZONES
HAVE_ZONES

  CONFIG PARAMETER: have_zones <yes/no>
  DEFAULT: yes

  Specifies whether zones should be active. If this is off, zone connects
  and disconnects, zone commands, and the control aspects will all be
  disabled.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

& HELPFILE
HELPFILE

  CONFIG PARAMETER: helpfile <command> <pathname>
  DEFAULT: None

  This configuration directive associates the in-game command, <command>, with
  a set of help topics contained in the file <pathname>.txt.  By default,
  <command> has 'public' permissions, but this can be further restricted with
  the 'access' configuration directive.

  The associated <command> will have one of the following forms:

    <command> <topic>
    <command> <topic wildcard pattern>

  Unlike raw_helpfile, the associated helpfile <command> evaluates the <topic>
  before giving the result to the player.  To avoid this evaluation, use the
  raw_helpfile configuration directive instead.

  The default configuration file contains the following lines already, but
  the base server does not setup any help files (including help, wizhelp, or
  news).  Therefore, make sure that your older configuration files contain
  at least the following lines:

    raw_helpfile help text/help
    raw_helpfile wizhelp text/wizhelp
    access wizhelp wizard

  Also, in order for the help aliases in alias.conf to be setup properly,
  the three above lines must occur before alias.conf is included.

  To prevent access to arbitrary files after the server has started, this
  configuration directive cannot be used by via @admin after the server has
  started.

  Examples:
     helpfile wiznews text/wiznews
     access wiznews wizard

  Related Topics: access, raw_helpfile

& HOOK SETUP
HOOK SETUP

  Hooks are set up by following the shown methods.
  1)  You must first create and setup a hook object to store the data.
      Once you have @created the object, the object needs to be defined
      with the 'HOOK_OBJ' admin parameter.  This may be placed in the
      .conf file or done via @admin.

  2)  You must set up hooks for the commands/attributes you wish to use.
      The hooks are 'permit', 'ignore', 'before', 'after', and 'igswitch'.
      See wizhelp on 'hook_cmd' on more info of these switchtypes.
      You may use the @hook command, or use the hook_cmd admin parameter
      to place in a .conf file.

  3)  The PERMIT and IGNORE config params are 'enabled' if they return
      anything but a 'NULL' or a '1'.

  4)  The IGSWITCH config parameter is a toggle only.

  5)  The BEFORE and AFTER switches are automatically processed if existing.

  6)  The following attributes on the global hook object (hook_obj) exist:
         I_<command> - ignore            P_<command> - permit
         A_<command> - after             B_<command> - before

{ see 'wizhelp hook setup2' for examples }

& HOOK SETUP2
HOOK SETUP (continued)

  > @create HookObject
  HookObject created as object #1234
  > &a_look #1234=[pemit(%#,-- After The Look --)]
  > &b_look #1234=[pemit(%#,-- Before The Look --)]
  > &i_look #1234=[gt(match(v(is-ignored),%#),0)]
  > &p_look #1234=[gt(match(v(is-forbidden),%#),0)]
  > &is-ignored #1234=#5 #8 #9 #12   (this gets 'Huh? (type 'help' for help)')
  > &is-forbidden #1234=#6 #10 #15   (this gets 'Permission denied.')

  Now you can do one of two things:
  > @hook/before look
  > @hook/after look
  > @hook/ignore look
  > @hook/permit look
  OR...
  > @admin hook_cmd look before after ignore permit

  There, your hook object is all set up.  If you want it to last through
  reboots, you need to either put the @hook's in a @startup, or add the
  hook_cmd to the .conf file.  You probably want the hook_cmd :)

  Related Topics: @hook, hook_cmd, hook_obj.

& HOOK_CMD
HOOK_CMD

  CONFIG PARAMETER: hook_cmd <command> <hooks/!hooks>

  This admin parameter allows you to specify multiple hooks for commands
  or attributes in the .conf file or online via @admin.  This is an
  alternative way to applying hooks besides the @hook command.

  The following hooks exist:

    - before      set up functionality BEFORE a command executes.
    - after       set up functionality AFTER a command executes.
    - permit      establish functionary lock of attribute/command.
    - ignore      establish ignore inheritance of attribute/command.
    - igswitch    specifies if command bypasses failed /switch notices.

  For detailed information on how to set up hooks, please see wizhelp on:
  hook setup.

  Related Topics: @hook, hook_obj, hook setup.

& HOOK_OBJ
HOOK_OBJ

  CONFIG PARAMETER: hook_obj <dbref>
  Default: (none)

  Specifies the valid dbref# that the hook information is stored.  All
  hooks are in the form <prefix>_<command/attribute>.

  Attributes are stored in the form:

      I_<command> - ignore configuration
      P_<command> - permit configuration
      A_<command> - after configuration
      B_<command> - before configuration

  For detailed information on how to set up hooks, please see wizhelp on:
  hook setup.

  Related Topics: @hook, hook_cmd, hook setup.

& HOSTNAMES
HOSTNAMES

  CONFIG PARAMETER: hostnames <yes/no>
  DEFAULT: yes

  Indicates whether or not IP addresses should be replaced with host names
  where possible in the log file and wizard WHO report.

& IDLE_INTERVAL
IDLE_INTERVAL

  CONFIG PARAMETER: idle_interval <secs>
  DEFAULT: 60

  Sets the interval between checks for idle users.

  Related Topics: conn_timeout, idle_timeout.

& IDLE_TIMEOUT
IDLE_TIMEOUT

  CONFIG PARAMETER: idle_timeout <secs>
  DEFAULT: 3600 (one hour)

  If greater than zero, this parameter determines the amount of time that a
  player may remain idle before being automatically disconnected.  Idle
  players by this measure are disconnected when the next check for idle
  players is done.

  If zero or negative, this parameter effectively disables idleness-based
  connection timeouts.

  Related Topics: conn_timeout, idle_interval.

& IDLE_WIZ_DARK
IDLE_WIZ_DARK

  CONFIG PARAMETER: idle_wiz_dark <yes/no>
  DEFAULT: no

  Indicates whether or not wizards or players with the idle power who are
  idle for longer than the default timeout value are to automatically be
  set DARK, and then unDARKed when they type in their next command. Wizards
  already set DARK are not automatically unDARKed. Any player who is set
  dark by this action will have a 'd' instead of a 'D' by their idle time
  in the privileged WHO listing.

& IMMOBILE_MESSAGE
IMMOBILE_MESSAGE

  CONFIG PARAMETER: immobile_message <string>
  DEFAULT: none

  Specifies the string that is sent to a player when they try to move
  while their IMMOBILE flag is set.

  This configuration option is only available if FIRANMUX is enabled.

  Related Topics: fixed_home_message, fixed_tel_message.

& INCLUDE
INCLUDE

  CONFIG PARAMETER: include <path>
  DEFAULT: none

  Reads and processes configuration directives from the named file.
  This directive is only valid during startup.

& INDENT_DESC
INDENT_DESC

  CONFIG PARAMETER: indent_desc <yes/no>
  DEFAULT: no

  Places a blank row before and after every room, object, and exit
  description when looked at.

& INHERIT
INHERIT

  FLAG: INHERIT(I) (all types)

  When set on an object, gives the object access to the WIZARD and IMMORTAL
  powers that its owner has, and also allows that object to control the player
  and other INHERIT objects owned by that player.

  When set on a player, gives all of that player's objects access to the
  WIZARD and IMMORTAL powers of their owner, and allows them to control the
  player or any object owned by the player.

& INHERITANCE
INHERITANCE

  This topic intentionally left blank.

& INITIAL_SIZE
INITIAL_SIZE

  CONFIG PARAMETER: initial_size <number>
  DEFAULT: 1000

  This is the number of objects that can be created before the database
  structure has to be reallocated again. This is needed since MUX allocates
  space for the database in large chunks, the size of which depends on
  this parameter.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

& INPUT_DATABASE
INPUT_DATABASE

  CONFIG PARAMETER: input_database
  DEFAULT: netmux.db

  Specifies the name of the database file that is read in at startup.
  This file is used only as an input file, the parameter output_database
  controls where updated copies of the database are written.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: crash_database, output_database

& KILL_GUARANTEE_COST
KILL_GUARANTEE_COST

  CONFIG PARAMETER: kill_guarantee_cost <amount>
  DEFAULT: 100

  Specifies the amount of money you have to spend (i.e., kill target =
  <amount>) to have a 100% chance of killing them (assuming there are no
  other factors, such as the victim being immortal or in a HAVEN room, etc).
  The chance of a successful kill is <amount spent> / <kill_guarantee_cost>.

  Related Topics: kill, kill_max_cost, kill_min_cost, HAVEN, IMMORTAL,
                  KILLING.

& KILL_MAX_COST
KILL_MAX_COST

  CONFIG PARAMETER: kill_max_cost <amount>
  DEFAULT: 100

  Specifies the maximum amount of money that may be usefully spent on a kill
  attempt.  Spending more than this amount does not improve the chance of
  success.  Setting this parameter to less than the kill_guarantee_cost
  parameter prevents 'automatic kills', as the kill will always have a chance
  of failing.

  Related Topics: kill, kill_guarantee_cost, kill_min_cost, HAVEN, IMMORTAL,
                  KILLING.

& KILL_MIN_COST
KILL_MIN_COST

  CONFIG PARAMETER: kill_min_cost <amount>
  DEFAULT: 10

  Specifies the minimum (and default) cost for attempting to kill someone or
  something.

  Related Topics: kill, kill_guarantee_cost, kill_max_cost, HAVEN, IMMORTAL,
                  KILLING.

& LAG_LIMIT
LAG_LIMIT

  CONFIG PARAMETER: lag_limit <seconds>
  DEFAULT: 60.000

  Controls when to discontinue servicing expensive commands.  Any command
  taking longer than <seconds> is abandoned.  Note that the resolution of
  <seconds> is 100ns which is the 7th decimal place to the right of the
  decimal point.

  Examples:
     lag_limit 15
     @admin lag_limit=15.5

  Related Topics: lag_maximum

& LAG_MAXIMUM
LAG_MAXIMUM

  CONFIG PARAMETER: lag_maximum <seconds>
  DEFAULT: 120.000

  Controls when to log expensive commands.  Any command taking longer than
  <seconds> is logged.  Note that the resolution of <seconds> is 100ns
  which is the 7th decimal place to the right of the decimal point.

  Examples:
     lag_maximum 1.2
     @admin lag_maximum=0.750

  Related Topics: lag_limit

& LBUF_SIZE
LBUF_SIZE

  CONFIG PARAMETER: lbuf_size <bytes>
  DEFAULT: 8000

  This provides softcode access to the LBUF_SIZE compile-time #define.  It is
  not changeable as a configuration option at startup or during run-time,
  although it is changable at compile-time.

  Examples:
     > think config(lbuf_size)
     8000

  Related Topics:

& LINK_COST
LINK_COST

  CONFIG PARAMETER: link_cost <amount>
  DEFAULT: 1

  Specifies the cost of using the @link command to establish or change the
  link of an exit to its destination, the home of a player or an object, or
  the drop-to of a room.

  Related Topics: @link.

& LIST_ACCESS
LIST_ACCESS

  CONFIG PARAMETER: list_access <param> [!]<privilege> [[!]<privilege>]...

  Changes the access needed to the <param> option of the @list command.

  Related Topics: @list, PERMISSIONS.

& LOCK_RECURSION_LIMIT
LOCK_RECURSION_LIMIT

  CONFIG PARAMETER: lock_recursion_limit <num>
  DEFAULT: 20

  Sets the maximum number of levels of indirection that may be used when
  using indirect locks.  If more than this many levels are used, the lock
  fails and the user gets an error message.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

& LOG
LOG

  CONFIG PARAMETER: log [!]<logoption> [[!]<logoption>]...

  Specifies what types of events are to be logged to the logfile.

    accounting     - Write an accounting record to the log for each player
                     who disconnects.
    all_commands   - Record all commands executed.
    bad_commands   - Record commands entered that did not match anything.
    buffer_alloc   - Record buffer allocates and frees.
    bugs           - Record internal inconsistencies found.
    checkpoints    - Record automatic database dumps.
    config_changes - Record uses of the @admin command.
    create         - Record creation of new players.
    killing        - Record uses of the kill and slay commands.
    logins         - Record connects to characters.
    network        - Record new and broken net connections.
    problems       - Record problems found with the database.
    security       - Record security-related events.
    shouts         - Record uses of the @wall command.
    startup        - Record information about game startup.
    suspect        - Record commands entered by players flagged SUSPECT.
    time_usage     - Record @timecheck output.
    wizard         - Record uses of dangerous commands like @toad.

  Related Topics: log_options.

& LOGGING
LOGGING

  There are two separate forms of logging.  Firstly, server-related logging is
  controlled with the two configuration parameters: 'log_options' and 'log'.
  Secondly, softcode may use the @log command to send arbitrary text to
  arbitrary log files.  The former style of logging automatically breaks into
  500KB chunks.  The latter style does not.

  In the first style, the log_options parameter controls the information that
  is written along with the message in the logfile.  By default, log_options
  is configured to write the timestamp of the log message and the location of
  referenced players and objects.

  The log_options parameter controls what type of information is written to
  the logfile.  Many different types of log information can be stored.  By
  default, log_options is configured to record the following events:  bugs,
  security, network, logins, checkpoints, config_changes, shouts, startup,
  wizard, suspect_commands, problems, and create.  See 'wizhelp log' for
  specifics on the information stored by these event types.

  Of note, the log configuration option of 'all_commands' can be used to
  monitor every command issued by every player on the game when strange
  activity is occuring.   Doing so, however, may raise privacy concerns.
  Use with caution.  If a single individual is in question, use of the
  SUSPECT flag and suspect_commands event logging is suggested.

  Related Topics: log, log_options, @log, @list logging.

& LOGOUT_CMD_ACCESS
LOGOUT_CMD_ACCESS

  CONFIG PARAMETER: logout_cmd_access <command> <permlist>

  Specifies permission for logged-out commands (i.e., WHO, DOING, SESSION,
  QUIT, OUTPUTPREFIX, and OUTPUTSUFFIX).

  Any restriction applied here will disable the command from the login
  screen without affecting its use by players within the game.

  Related Topics: access.

& LOGOUT_CMD_ALIAS
LOGOUT_CMD_ALIAS

  CONFIG PARAMETER: logout_cmd_alias <alias> <command>

  Makes <alias> an alias for <command>, where <command> is one of WHO, DOING,
  SESSION, QUIT, OUTPUTPREFIX, and OUTPUTSUFFIX.

& LOG_OPTIONS
LOG_OPTIONS

  CONFIG PARAMETER: log_options [!]<option> [[!]<option>]...

  Specifies the type of information to be included in each log entry.
  The possible values are:

    flags       - Include the flags set on a player or object.
    location    - Include the location of referenced players and objects.
    owner       - Include the owner of referenced players and objects.
    timestamp   - Include a timestamp in each log entry.

  Related Topics: log.

& LOOK_OBEY_TERSE
LOOK_OBEY_TERSE

  CONFIG PARAMETER: look_obey_terse <yes/no>
  DEFAULT: YES

  Indicates whether or not the 'look' command obeys the TERSE flag when
  deciding how much information to display.  If set to yes, the
  terse_shows_contents, terse_shows_exits, and terse_shows_move_messages
  config options control the amount of information displayed for TERSE
  players.

  Related Topics: terse_shows_contents, terse_shows_exits,
                  terse_shows_move_messages.

& MACHINE_COMMAND_COST
MACHINE_COMMAND_COST

  CONFIG PARAMETER: machine_command_cost <number>
  DEFAULT: 64

  Sets the cost for running a command from a machine, as opposed to running
  it interactively.  Each command run has a one in <number> chance of being
  charged one coin for machine overhead.

& MAIL_DATABASE
MAIL_DATABASE

  CONFIG PARAMETER: mail_database <path>
  DEFAULT: mail.db

  Sets the file that @mail information is to be stored in. The database
  is only loaded or saved if have_mailer is set to yes.

  Related Topics: have_mailer.

& MAIL_EHLO
MAIL_EHLO

  CONFIG PARAMETER: mail_ehlo <string>
  DEFAULT: None

  Specifies the EHLO string to offer to the SMTP server.  This is typically
  the DNS name of the sending host or something close, and SMTP servers are
  likely to perform a reverse-DNS lookup on the sender's IP address, an MX
  lookup on the EHLO string, and make some judgement as to whether the sender
  is relaying mail.

  This option is only available if FIRANMUX is enabled.

  Related Topics: mail_sendaddr, mail_sendname, mail_server, and mail_subject.

& MAIL_EXPIRATION
MAIL_EXPIRATION

  CONFIG PARAMETER: mail_expiration <number of days>
  DEFAULT: 14

  Sets the number of days that a @mail message should last before it is
  automatically deleted by the system. If this parameter is set to a
  negative number, this feature will be disabled.

& MAIL_PER_HOUR
MAIL_PER_HOUR

  CONFIG PARAMETER: mail_per_hour <maximum>
  DEFAULT: 50

  Specifies the maximum number of @mail items per hour that a mortal
  may create.  Attempts to create @mail after this limit has been
  reached are denied.  Any existing @mail-in-progress is still
  permitted.

  Related Topics: pcreate_per_hour, user_attr_per_hour

& MAIL_SENDADDR
MAIL_SENDADDR

  CONFIG PARAMETER: mail_sendaddr <string>
  DEFAULT: None

  Specifies the E-mail address of the sender for outgoing E-mail.

  This option is only available if FIRANMUX is enabled.

  Related Topics: mail_ehlo, mail_sendname, mail_server, and mail_subject.

& MAIL_SENDNAME
MAIL_SENDNAME

  CONFIG PARAMETER: mail_sendname <string>
  DEFAULT: None

  Specifies the sender's friendly name for outgoing E-mail.

  This option is only available if FIRANMUX is enabled.

  Related Topics: mail_ehlo, mail_sendaddr, mail_server, and mail_subject.

& MAIL_SERVER
MAIL_SERVER

  CONFIG PARAMETER: mail_server <string>
  DEFAULT: None

  Specifies the host name of the SMTP server for outgoing E-mail.

  This option is only available if FIRANMUX is enabled.

  Related Topics: mail_ehlo, mail_sendaddr, mail_sendname, and mail_subject.

& MAIL_SUBJECT
MAIL_SUBJECT

  CONFIG PARAMETER: mail_subject <string>
  DEFAULT: None

  Specifies the subject line for outgoing E-mail.

  This option is only available if FIRANMUX is enabled.

  Related Topics: mail_ehlo, mail_sendaddr, mail_sendname, and mail_server.

& MARKED
MARKED

  FLAG: MARKED(m) (all types)

  This flag is used by the database cleaning routines to check the
  connectivity of the database, and also by the @mark commands to select
  objects for special attention.  Since database cleaning is performed
  automatically from time to time, automatic cleaning must be disabled
  before using the @mark commands, and the command @mark_all/clear should
  be run immediately before turning automatic cleaning back on.

  Related Topics: @apply_marked, @dbck, @disable, @enable, @list, @mark,
                  @mark_all.

& MASTER_ROOM
MASTER_ROOM

  CONFIG PARAMETER: master_room <roomnum>
  DEFAULT: (none)

  Specifies the room that is searched for exits if a command does not match
  an exit in the current room, and for $-command if a command does not match
  any $-commands that are available to the player in his current location.

  Note: Do not prefix <roomnum> with a '#' character. Even though it is a
  dbref of the master room, it must be given here as a number.

& MASTER ROOM
MASTER ROOM

  The master room contains the default exits and $-commands for the MUX.  The
  exits in the master room are checked if a command doesn't match an exit in
  the player's current room, and the $-commands on the room and its contents.

  Caution: Do not allow players into the master room, as they can leave
  objects that will be searched for $-commands.  Make sure that the room is
  not JUMP_OK or LINK_OK, and that any exits leading to the room are locked
  so that only wizards may use them.

  To make global commands, make an exit in the master room that is locked to
  #0 (or some other impossible lock) and has an appropriate Afail action (and
  possibly Fail and Ofail messages).  You can make global exits by having an
  unlocked exit from the master room (or an exit locked to a desired key
  object) lead to the desired destination.  When a player goes through one of
  these exits, any KEY objects are returned home, as is done with @teleport.

  Do not put too many objects in the room, because each object is searched
  for $-command every time anyone (or anything) anywhere on the MUX enters
  an unrecognized command.

  Related Topics: @link, @lock, @open, master_room.

& MATCH_OWN_COMMANDS
MATCH_OWN_COMMANDS

  Config parameter: match_own_commands <yes/no>.  Default: NO

  Specifies whether or not objects search themselves for $-commands when a
  command does not match an exit or an internal command.  In order for
  players to search themselves for commands, both match_own_commands and
  player_match_own_commands must be set to yes.

  Related Topics: player_match_own_commands.

& MAX_CACHE_SIZE
MAX_CACHE_SIZE

  CONFIG PARAMETER: max_cache_size <size>
  DEFAULT: 1048576

  Expressed in bytes, this is the maximum size the server will use for caching
  attribute values from the database.

  Related Topics: cache_pages, cache_tick_period.

& MAX_PLAYERS
MAX_PLAYERS

  CONFIG PARAMETER: max_players <num>
  DEFAULT: -1 (unlimited)

  Sets the maximum number of players that may be connected at any one time
  Note that wizards are allowed to login even if they would exceed the limit,
  and that this limit does not override any limits imposed by the system
  running the MUX (such as the maximum number of net connections a process
  may have).  Players connecting when there are max_players players connected
  receive the contents of the file named by the full_file directive, and the
  full_motd_message (also settable via @motd/full), and are disconnected.

  Related Topics: @motd, full_file, full_motd_message.

& MIN_GUESTS
MIN_GUESTS

  CONFIG PARAMETER: min_guests
  DEFAULT: 1

  Specifies the minimum number of guests that are should remain on the MUX.
  These guests will not be nuked on @dbck's but will instead be recycled.
  Use this to set how many guests you normally have on.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: number_guests, guest_char_num, guest_prefix, guest_site.

& MONEY_NAME_PLURAL
MONEY_NAME_PLURAL

  CONFIG PARAMETER: money_name_plural <string>
  DEFAULT: pennies

  Specifies the string to use to describe the coin of the realm when they
  are being referred to plurally (such as: 'You have <number> pennies.', where
  <number>  is not 1).

  Related Topics: money_name_singular.

& MONEY_NAME_SINGULAR
MONEY_NAME_SINGULAR

  CONFIG PARAMETER: money_name_singular <string>
  DEFAULT: penny

  Specifies the string to use to describe the coin of the realm when they
  are being referred to singularly (such as: 'You found a penny!').

  Related Topics: money_name_plural.

& MOTD_FILE
MOTD_FILE

  CONFIG PARAMETER: motd_file <pathname>
  DEFAULT: text/motd.txt

  Specifies the name of the file to be shown to players immediately after they
  connect to their characters.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: @readcache, newuser_file, motd_message.

& MOTD_MESSAGE
MOTD_MESSAGE

  CONFIG PARAMETER: motd_message <message>
  DEFAULT: blank

  Sets the MOTD message that is displayed to all characters when they log in.
  This message is displayed in addition to the contents of the motd.txt
  file.  It can be changed with the @motd command and examined by the
  @listmotd command.

  Related Topics: @listmotd, @motd, motd_file.

& MUD_NAME
MUD_NAME

  CONFIG PARAMETER: mud_name <string>
  DEFAULT: MUX

& NEWUSER_FILE
NEWUSER_FILE

  CONFIG PARAMETER: newuser_file <filename>
  DEFAULT: text/newuser.txt

  Specifies the file to be shown to new players immediately after they
  create their characters, in place of the MOTD file.  This file should
  contain information about the basic commands and how to get help.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: @readcache, motd_file.

& NOSITEMON_SITE
NOSITEMON_SITE

  CONFIG PARAMETER: nositemon_site <site>

  Indicates that sites that match <site> are not to be reported to players
  with the SITEMON flag.

  Related Topics: register_site, REGISTRATION, SITE LISTS, SITE NOTATION.

& NOTIFY_RECURSION_LIMIT
NOTIFY_RECURSION_LIMIT

  CONFIG PARAMETER: notify_recursion_limit <num>
  DEFAULT: 20

  Sets the maximum number of times that the notify() routine may be called
  recursively.  A recursive call is made whenever a message heard by an
  object is to be forwarded to its contents.

& NUMBER_GUESTS
NUMBER_GUESTS

  CONFIG PARAMETER: number_guests <num>
  DEFAULT: 30

  How many guests should we allow at any one time?

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: guest_char_num, guest_nuker, guest_prefix.

& OPEN_COST
OPEN_COST

  CONFIG PARAMETER: open_cost <amount>
  DEFAULT: 1

  Indicates the cost of using the @open command to open a new exit.
  If a destination for the new exit is specified and the link is successful,
  then the link_cost is also charged.

  Related Topics: @open, link_cost.

& OUTPUT_DATABASE
OUTPUT_DATABASE

  CONFIG PARAMETER: output_database <pathname>
  DEFAULT: none

  Specifies the file to which the database is to be written when writing
  checkpoint dumps or writing the final dump after receiving a @shutdown
  command.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: @dump, @shutdown, checkpoint_database, input_database.

& OUTPUT_LIMIT
OUTPUT_LIMIT

  CONFIG PARAMETER: output_limit <amount>
  DEFAULT: 16384

  Specifies how many bytes should be output before the output is flushed
  and characters are lost.

& PAGE_COST
PAGE_COST

  CONFIG PARAMETER: page_cost <amount>
  DEFAULT: 10

  Specifies the cost of using the page command.

  Related Topics: page.

& PARANOID_ALLOCATE
PARANOID_ALLOCATE

  CONFIG PARAMETER: paranoid_allocate <yes/no>
  DEFAULT: no

  Controls whether or not the game performs a consistency check on the entire
  set of xbuf buffers each time one is allocated or freed.  This check
  involves making sure that nobody has written to the memory immediately
  before and after each buffer.  Normally, only the buffer being allocated or
  freed is checked.

& PARENT_RECURSION_LIMIT
PARENT_RECURSION_LIMIT

  CONFIG PARAMETER: parent_recursion_limit <num>
  DEFAULT: 10

  This directive specifies how far back to check parents for commands
  and attributes.

& PAYCHECK
PAYCHECK

  CONFIG PARAMETER: paycheck <amount>
  DEFAULT: 0

  Specifies the default amount of money that players receive each day they
  connect.  This parameter may be overridden by setting the ALLOWANCE
  attribute on the player to a different value.

  Related Topics: @allowance, earn_limit, starting_money.

& PCREATE_PER_HOUR
PCREATE_PER_HOUR

  CONFIG PARAMETER: pcreate_per_hour <maximum>
  DEFAULT: 100

  Specifies the maximum number of player object creations that can be
  performed game-wide (including from the connect screen and via the @pcreate
  command).  Attempts to create more than this limit are denied.

  Related Topics: mail_per_hour, user_attr_per_hour

& PEMIT_ANY_OBJECT
PEMIT_ANY_OBJECT

  CONFIG PARAMETER: pemit_any_object <yes/no>
  DEFAULT: no

  Indicates whether or not players may @pemit to faraway objects they do not
  control.  It does not affect @pemits to faraway players, the
  pemit_far_players directive is used for that purpose.

  Related Topics: pemit_far_players.

& PEMIT_FAR_PLAYERS
PEMIT_FAR_PLAYERS

  CONFIG PARAMETER: pemit_far_players <yes/no>
  DEFAULT: no

  Controls whether or not players may use the @pemit command to send messages
  to other connected players that are not in the same room.  The rules and
  costs for this form of @pemit are the same as for page.

  Related Topics: pemit_any_object.

& PERMISSIONS
PERMISSIONS

  Access to many MUX features is controlled by a set of permissions, which
  can usually be changed via the configuration file or the @admin command.

  There are three different senses of Wizard:

    1) 'WIZARD' means the WIZARD flag,

    2) 'Wizard' means Wizard-level authority which can be achieved either by
       being set WIZARD or by inheriting that authority from a WIZARD-owned
       object with the INHERIT flag, and

    3) Wizard(#1) who is always set WIZARD and has other special privileges.


  The following list uses two of those senses: 'Wizard' and Wizard(#1).

  This is a list of the valid permissions and their meanings:

    builder        - Must be Wizard, ROYALTY, or have the BUILDER power.
    dark           - Feature is not shown but is still available (1).
    disabled       - No one can use this feature.

{ 'wizhelp permissions2' for more }

& PERMISSIONS2
PERMISSIONS (continued)

    global_build   - Requires the BUILDER power, Wizard/ROYALTY, or for
                     building to be allowed game-wide.
    global_interp  - Requires that global interpretation be turned on.
    god            - Only #1 may use this feature.
    head           - Must be set HEAD to use this feature.
    immortal       - Must be set IMMORTAL or set INHERIT with IMMORTAL owner.


    need_contents  - Only players, things, and rooms may use this feature.
    need_location  - Only players and things may use this feature.
    need_player    - Only players may use this feature.
    no_haven       - Non-Wizard players with owners set HAVEN may not use this
                     feature.
    no_immobile    - Non-Wizard players with owners set IMMOBILE may not use
                     this feature (2).
    no_restricted  - Non-Wizard players with owners set RESTRICTED may not use
                     this feature (2).
    no_robot       - Non-Wizard players set ROBOT may not use this feature.
    no_slave       - Non-Wizard players with owners set SLAVE may not use this
                     feature.

{ 'wizhelp permissions3' for more }

& PERMISSIONS3
PERMISSIONS (continued)

    no_suspect     - Non-Wizard players with owners set SUSPECT may not use
                     this feature.
    no_guest       - Non-Wizards must not possess the GUEST power in order to
                     use this feature.
    no_uninspected - Only things which have been inspected can use this
                     feature.
    robot          - Only players set ROBOT can use this feature.
    staff          - Only STAFF/ROYALTY/IMMORTAL players can use this feature.
    static         - Nothing is allowed to use this feature after the server
                     starts.  This is useful for controlling something in the
                     configuration file that you do not want to be
                     controllable via the @admin command.
    uninspected    - Only things marked uninspected can use this feature.
    wizard         - Only Wizards may use this feature.

  Footnotes:

    (1) The dark permission is not available if FIRANMUX is enabled.
    (2) The no_immutable and no_restricted permissions are only available if
        FIRANMUX is enabled.

& PERMIT_SITE
PERMIT_SITE

  CONFIG PARAMETER: permit_site <site>

  Indicates that connections are to be accepted and registration is not to be
  enforced from sites whose address matches the specified <site>.  This
  directive is typically used to enable connections from a few selected hosts
  or subnets that would otherwise be disallowed by a forbid_site directive.
  The default is all sites permitted, none forbidden.

  Related Topics: badsite_file, forbid_site, register_site, guest_site
                  SITE LISTS, SITE NOTATION.

& PLAYER_FLAGS
PLAYER_FLAGS

  CONFIG PARAMETER: player_flags <flags>
  DEFAULT: blank

  Modifies the set of flags that a player receives when it is created via the
  @pcreate command or via the connection screen.  Flags prefixed by a ! remove
  the indicated flag from the set.

  Related Topics: @list, exit_flags, robot_flags, room_flags, thing_flags.

& PLAYER_LISTEN
PLAYER_LISTEN

  CONFIG PARAMETER: player_listen
  DEFAULT: no

  Indicates whether the Listen, Aahear, Ahear, and Amhear attributes on
  player objects are to be obeyed.

& PLAYER_MATCH_OWN_COMMANDS
PLAYER_MATCH_OWN_COMMANDS

  CONFIG PARAMETER: player_match_own_commands <yes/no>
  DEFAULT: no

  Specifies whether or not players should check themselves for $-commands.
  This parameter is only checked if the match_own_commands parameter is
  set to yes.

  Related Topics: match_own_commands.

& PLAYER_NAME_SPACES
PLAYER_NAME_SPACES

  CONFIG PARAMETER: player_name_spaces
  DEFAULT: yes

  Specifies whether or not player names are permitted to contain spaces.

& PLAYER_QUEUE_LIMIT
PLAYER_QUEUE_LIMIT

  CONFIG PARAMETER: player_queue_limit
  DEFAULT: 100

  Sets the maximum number of commands that non-wizard players may have on the
  queue at one time.  An attempt to queue more commands than allowed will
  halt the object performing the command.

& PLAYER_QUOTA
PLAYER_QUOTA

  CONFIG PARAMETER: player_quota <amount>
  DEFAULT: 1

  Sets how much quota it costs to create a robot player (and also how much the
  remaining quota is increased when a robot is @destroyed.

  Related Topics: @quota, exit_quota, room_quota, thing_quota, QUOTAS.

& PLAYER_STARTING_HOME
PLAYER_STARTING_HOME

  CONFIG PARAMETER: player_starting_home
  DEFAULT: <player_starting_room>

  Specifies the room to which the home of new players is set.  If this
  parameter has not been set, then the value of the player_starting_room
  parameter is used instead.

  Related Topics: default_home, player_starting_room, @pcreate, player_flags.

& PLAYER_STARTING_ROOM
PLAYER_STARTING_ROOM

  CONFIG PARAMETER: player_starting_room
  DEFAULT: 0

  Specifies the room that new players start out in.  If the
  player_starting_home parameter has not been set, then player_starting_room
  is used for both.

  Related Topics: player_starting_home, @pcreate, player_flags.

& PORT
PORT

  CONFIG PARAMETER: port <port1> [<port2> [<port3> ...]]
  DEFAULT: 2860

  Specifies the IP port(s) on which the game listens for new connections.

& POSTDUMP_MESSAGE
POSTDUMP_MESSAGE

  CONFIG PARAMETER: postdump_message <message>
  DEFAULT: blank

  Sets the message that is sent to everyone after a database dump
  whether automatically or via the @dump command.

  Related Topics: @dump, dump_message.

& POWER_ALIAS
POWER_ALIAS

  CONFIG PARAMETER: power_alias <alias> <powername>

  Defines <alias> as a synonym for the power <powername>.

  Related Topics: alias, flag_alias, function_alias.

& PUBLIC_CHANNEL
PUBLIC_CHANNEL

  CONFIG PARAMETER: public_channel <name>
  DEFAULT: Public

  Specifies the name of the channel that new players join when they are
  created. You must have previously created the channel. To disable this
  feature, simply set this parameter to nothing.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: guests_channel, guests_channel_alias, public_channel_alias

& PUBLIC_CHANNEL_ALIAS
PUBLIC_CHANNEL_ALIAS

  CONFIG PARAMETER: public_channel_alias <name>
  DEFAULT: pub

  Specifies the name of the channel alias that new players join when they are
  created.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: guests_channel, guests_channel_alias, public_channel

& PUBLIC_FLAGS
PUBLIC_FLAGS

  CONFIG PARAMETER: public_flags <yes/no>
  DEFAULT: yes

  If enabled, indicates that players may get the flags of any object with the
  flags() function call.  Otherwise, they may only get the flags for objects
  that are examinable by them.

  Related Topics: flags().

& PUEBLO_MESSAGE
PUEBLO_MESSAGE

  CONFIG PARAMETER: pueblo_message <message>
  DEFAULT: "</xch_mudtext>"

  Sets the message that is sent to Pueblo clients as a reponse to the
  PUEBLOCLIENT command.

  Related Topics: pueblo.

& QUEUE_ACTIVE_CHUNK
QUEUE_ACTIVE_CHUNK

  CONFIG PARAMETER: queue_active_chunk <num>
  DEFAULT: 10

  Specifies the number of commands to be run from the player queue when the
  check for network traffic indicates that there is data needing to be
  read from or written to the network.

  Related Topics: queue_idle_chunk.

& QUEUE_IDLE_CHUNK
QUEUE_IDLE_CHUNK

  CONFIG PARAMETER: queue_idle_chunk <num>
  DEFAULT: 10

  Specifies the number of commands to be run from the player queue when the
  check for network traffic indicates that there is no data needing to be
  read from or written to the network.

  Related Topics: queue_active_chunk.

& QUIET_LOOK
QUIET_LOOK

  CONFIG PARAMETER: quiet_look <yes/no>
  DEFAULT: yes

  Indicates whether or not players are shown the attributes set on an object
  when they look at it.  Not recommended.

& QUIET_WHISPER
QUIET_WHISPER

  CONFIG PARAMETER: quiet_whisper <yes/no>
  DEFAULT: yes

  Indicates whether or not whispers are completely invisible except to the
  whispered-to player, or if a '<whisperer> whispers something to
  <recipient>.' message is displayed to everyone else in the same room.

  Related Topics: whisper.

& QUIT_FILE
QUIT_FILE

  CONFIG PARAMETER: quit_file <filename>
  DEFAULT: text/quit.txt

  Specifies the name of the file that is displayed to users after they QUIT
  but before the network connection is closed.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: QUIT, @readcache.

& QUOTAS
QUOTAS

  CONFIG PARAMETER: quotas <yes/no>
  DEFAULT: no

  Indicates whether or not building quotas are enforced and maintained.
  Quotas are stored as a relative number, ie. number of objects that the
  player may create, not the total number that the player may create.  If
  quotas are turned off and turned back on later, any building or @destroying
  that occurs in the interim does not affect the quotas.

  Related Topics: @create, @destroy, @dig, @open, @quota, QUOTAS.

& RAW_HELPFILE
RAW_HELPFILE

  CONFIG PARAMETER: raw_helpfile <command> <pathname>
  DEFAULT: none

  This is similiar to the 'helpfile' configuration directive, except that
  the help topics contained in <pathname> are not evaluted by the parser
  before being shown to the player.

  To prevent access to arbitrary files after the server has started, this
  directive cannot be used by via @admin after the server has started.

  Related Topics: helpfile

& READ_REMOTE_DESC
READ_REMOTE_DESC

  CONFIG PARAMETER: read_remote_desc <yes/no>
  DEFAULT: no

  Indicates whether or not the descriptions of faraway objects are available
  to players that don't control them via the examine command and get()
  function.

  Related Topics: examine, get().

& READ_REMOTE_NAME
READ_REMOTE_NAME

  CONFIG PARAMETER: read_remote_name <yes/no>
  DEFAULT: no

  Indicates whether or not the names of faraway objects are available
  to players that don't control them via the examine command and get()
  function.

  Related Topics: examine, get().

& REALITY LEVELS
REALITY LEVELS

  Reality levels are defined if you compile with the -DREALITY_LVLS
  option.  Once enabled, you use the .conf admin parameter 'reality_level'
  to define new reality levels.  You can only have a total of 32 reality
  levels defined.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

  Related topics: @rxlevel, @txlevel, def_player_rx, def_player_tx,
                 def_thing_rx, def_thing_tx, def_room_rx, def_room_tx,
                 wiz_always_real, reality_level, CANSEE()

& REALITY_LEVEL
REALITY_LEVEL

  CONFIG PARAMETER: reality_level <name> <value> [<desc attribute>]
  DEFAULT: none

  Defines a reality level, named <name> and with bitvalue <value>. If you
  specify <desc attribute>, it will be used in place of @desc for the 'look'
  command when a match is found for the level. Can be used only in the
  configuration file.  When a reality_level is defined, it automatically
  keeps a tally of those defined.  You can currently only have 32 total
  reality levels defined.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

  Example:
    reality_level real  1 desc
    reality_level ooc   2 desc
    reality_level build 4 desc
    reality_level umbra 8 umbra_desc

& REGISTER_CREATE_FILE
REGISTER_CREATE_FILE

  CONFIG PARAMETER: register_create_file <filename>
  DEFAULT: text/create_reg.txt

  Specifies the name of the file that is shown to players who attempt to
  create a new character when registration is in force from their site.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: @list_file, @readcache, register_site.

& REGISTER_SITE
REGISTER_SITE

  CONFIG PARAMETER: register_site <site>

  Indicates that registration is to be enforced for sites whose address
  matches the specified <site>.

  Related Topics: forbid_site, permit_site, guest_site, REGISTRATION,
                  SITE LISTS, SITE NOTATION.

& REGISTRATION
REGISTRATION

  Related Topics: SITE LISTS

& RESET_PLAYERS
RESET_PLAYERS

  CONFIG PARAMETER: reset_players <yes/no>.
  DEFAULT: no

  Requests that the record player counter is reset.  This request takes
  affect at @restart or ./Startmux.

  Related Topics: connrecord().

& RESTRICT_HOME
RESTRICT_HOME

  CONFIG PARAMETER: restrict_home <yes/no>
  DEFAULT: no

  Specifies whether or not the HOME command can be hooked with @hook or
  ignored with @icmd.

  Related Topics: hook setup, @hook, @icmd.

& RETRY_LIMIT
RETRY_LIMIT

  CONFIG PARAMETER: retry_limit <count>
  DEFAULT: 3

  Specifies the number of times that a user is allowed to try to connect to
  an existing player before being disconnected.

  Related Topics: conn_timeout.

& ROBOT_COST
ROBOT_COST

  CONFIG PARAMETER: robot_cost <amount>
  DEFAULT: 1000

  Specifies the cost of using the @robot command to create a robot.

  Related Topics: @robot, ROBOT.

& ROBOT_FLAGS
ROBOT_FLAGS

  CONFIG PARAMETER: robot_flags <flags>
  DEFAULT: ROBOT

  Modifies the set of flags that a robot receives when it is created via
  the @robot command.  Flags prefixed by a ! remove the indicated flag from
  the set.

  Related Topics: @list, exit_flags, player_flags, room_flags, thing_flags.

& ROBOT_SPEECH
ROBOT_SPEECH

  CONFIG PARAMETER: robot_speech: <yes/no>
  DEFAULT: yes

  Indicates whether or not robot characters are allowed to use the speech,
  pose, and emit commands in areas not controlled by their owner.

  Related Topics: @robot, ROBOT.

& ROOM_FLAGS
ROOM_FLAGS

  CONFIG PARAMETER: room_flags <flags>
  DEFAULT: blank

  Modifies the set of flags that a room receives when it is @dug.
  Flags prefixed by a ! remove the indicated flag from the set.

  Related Topics: @list, exit_flags, player_flags, robot_flags, thing_flags.

& ROOM_QUOTA
ROOM_QUOTA

  CONFIG PARAMETER: room_quota <amount>
  DEFAULT: 1

  Sets how much quota it costs to dig a room (and also how much the
  remaining quota is increased when a room is @destroyed.

  Related Topics: @quota, exit_quota, player_quota, thing_quota, QUOTAS.

& RUN_STARTUP
RUN_STARTUP

  CONFIG PARAMETER: run_startup
  DEFAULT: Yes

  Controls whether the @startup attribute is automatically executed at
  database load time.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

& SACRIFICE_ADJUST
SACRIFICE_ADJUST

  CONFIG PARAMETER: sacrifice_adjust <amount>
  DEFAULT: -1

  This parameter is part of the formula that is used to determine an object's
  value given the amount spent on its creation.  The formula is:

     value = (cost / sacrifice_factor) + sacrifice_adjust.

  The inverse formula is used to determine how much the owner receives when
  @destroying an object.

  Related Topics: @create, @destroy, SACRIFICING, sacrifice_factor.

& SACRIFICE_FACTOR
SACRIFICE_FACTOR

  CONFIG PARAMETER: sacrifice_factor <amount>
  DEFAULT: 5

  This parameter is part of the formula that is used to determine an object's
  value given the amount spent on its creation.  The formula is:

     value = (cost / sacrifice_factor) + sacrifice_adjust.

  The inverse formula is used to determine how much the owner receives when
  @destroying an object.

  Related Topics: @create, @destroy, SACRIFICING, sacrifice_adjust.

& SAFER_PASSWORDS
SAFER_PASSWORDS

  CONFIG PARAMETER: safer_passwords [yes/no]
  DEFAULT: No

  Normally, nearly any password is accepted, but if this
  configuration option is enabled, passwords must contain
  at least one capital letter, one lowercase letter, and
  one numeric digit or symbol.

& SAFE_WIPE
SAFE_WIPE

  CONFIG PARAMETER: safe_wipe [yes/no]
  DEFAULT: No

  Is @wipe disallowed for SAFE-marked objects?

& SEARCH CRITERIA
SEARCH CRITERIA

  The following criteria may be used when searching the database with the
  @search and @mark commands:

  Syntax: {@mark|@search} [<player>] [<class>=<restriction>]

  <player>  - Restricts to objects owned by the named player.
              By default, the search is limited to objects owned by the
              invoking player, except when searching for players or if
              the invoking player is a wizard.

{ 'wizhelp search criteria2' for more }

& SEARCH CRITERIA2
SEARCH CRITERIA (continued)

  The following classes may be used when searching:

  TYPE      - Restricts to objects of the indicated type (OBJECTS, ROOMS,
              EXITS, PLAYERS).
  NAME      - Restricts to objects whose names start with <restriction>.
  OBJECTS   - A combination of TYPE=OBJECT and NAME=<restriction>
  ROOMS     - A combination of TYPE=ROOM and NAME=<restriction>
  EXITS     - A combination of TYPE=EXIT and NAME=<restriction>
  PLAYERS   - A combination of TYPE=PLAYER and NAME=<restriction>
  FLAGS     - Restricts to objects which have the flags listed in
              <restriction> set.

  Related Topics: @mark, @search.

& SEARCH_COST
SEARCH_COST

  CONFIG PARAMETER: search_cost <amount>
  DEFAULT: 100

  Specifies how much commands that scan the entire database (such as @find,
  @search, and stats with a playername) cost.

  Related Topics: stats, @find, @search.

& SEE_OWNED_DARK
SEE_OWNED_DARK

  CONFIG PARAMETERS: see_owned_dark <yes/no>
  DEFAULT: yes

  Specifies whether or not players see their own DARK objects when they
  look at a room.  It does not affect the inventory or examine commands,
  both of which show all objects.

& SESSION
SESSION

  COMMAND: SESSION <prefix>

  The SESSION command displays character input and output information for
  all connected players, or just those who match <prefix>.

  This command can be used to help identify network problems as follows:

    - A nonzero Input Pending count can indicate typeahead or a
      client program dumping commands faster than the command scheduling
      parameters let them be executed.  Telnet sessions in character mode also
      show up with positive Input Pending counts when the player is in the
      middle of typing a command.
    - A nonzero Input Lost count means that the player has typed a line longer
      than what the MUX can handle.  This usually indicates a problem with
      the player's client or terminal (a stuck key).
    - A persistently large Output Pending count can indicate netlag between
      the host site and the player's site, or merely that the player has
      performed a command that generated a lot of output which hasn't been
      sent yet.
    - A nonzero Output Lost count usually means that the player performed
      a command that produced more output than the output buffer could hold.
      It may also indicate network problems or that the player is generating
      output faster than the network or his client can process it.

& SIGNALS
SIGNALS

  From a shell, the following signals can be sent to the server:

    SIGUSR1  - Server will restart (see @restart).
    SIGUSR2  - Server will drop a flatfile (see @dump/flat).
    SIGHUP   - Server will perform a normal dump (see @dump).
    SIGTERM  - Server will shutdown (see @shutdown).

& SIGNAL_ACTION
SIGNAL_ACTION

  CONFIG PARAMETER: signal_action <default|exit>
  DEFAULT: default

  Specifies what action to take when a fatal signal is received.  The
  possibilities are:

     default  - Log the error, produce a panic dump, dump a core file, and
                restart the game using the last reliably saved database.
                For a description of the restart process, see @restart.
     exit     - Log the error, and exit, hopefully with a core file.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

& SITE LISTS
SITE LISTS

  Site lists match the numeric IP address of the connecting player, and help
  to manage client access to the MUX.

  There are two site lists:

      Access Control List  - forbid_site, permit_site, register_site,
                             guest_site, nositemon_site.
      Suspects             - suspect_site and trust_site

  Both contain an ordered list of 'sites', 'subnets', or 'hosts' specified
  with a notation explained in the 'SITE NOTATION' topic.

  Each site in the list is matched in the order it appears in the
  configuration file, and the first one that matches is used.  Therefore, you
  should put the more narrowly-defined sites before the more broadly-defined
  ones. Otherwise, the more narrowly-defined site (the one covering a subset
  of IP addresses within the more broadly-defined site) will never be in
  force.

  Additions made to the lists after startup with the @admin command are put
  at the front of the list, and are checked before entries from the config
  file and previous entries made by the @admin command.

{ 'wizhelp site lists2' for more }

& SITE LISTS2
SITE LISTS (continued)

  Example:  Restricting Access

  register_site  135.246.4.40 255.255.255.255  <- Allow this site w/reg
  forbid_site    135.246.4.0  255.255.255.0    <- Disallow a class C subnet
  permit_site    135.246.0.0  255.255.0.0      <- Permit a class B network
  register_site  195.3.17.1   255.255.255.255  <- Permit this site w/reg.
  forbid_site    0.0.0.0      0.0.0.0          <- Disallow everyone else

  These directives only allow access from 135.346.*.* and 195.3.17.1, except
  that all hosts in the 135.246.4 subnet except for 135.246.4.40 are also
  not allowed access.  People connecting from 135.246.4.40 and 195.3.17.1
  are not allowed to create their own characters (registration is enabled
  for those sites), while people connecting from elsewhere on the 135.246
  net are allowed to create their own characters.

  Related Topics: @admin, forbid_site, @list site_information, permit_site,
                  register_site, SITE NOTATION, suspect_site, trust_site,
                  guest_site, nositemon_site..

& SITE NOTATION
SITE NOTATION

 Site notation specifies a range of numeric IP addresses.  A particular range
 can include a single IP address or the entire Internet.

 There are several variations:

   <address> <mask>    - The <address> and <mask> are both dotted IPv4
                         notation, but the <mask> is further restricted that
                         it's '1' bits are all together and form a prefix.
                         The <mask> specifies which bits in the <address> are
                         significant.

   <address>/<N>       - The <address> is a dotted IPv4 number, but <N> is an
                         integer from 0 to 32 that specifies the number of
                         significant bits in left-most part of the <address>.
                         This notation is called CIDR IP prefix notation or
                         'slash notation'.

{ 'wizhelp site notation2' for more }

& SITE NOTATION2
SITE NOTATION (continued)

 Four forms of dotted IPv4 addresses are allowed:

   8.8.8.8, 8.8.16, 8.24 and 32.

 8 means an 8-bit integer from 0 to 255, 16 means a 16-bit integer
 from 65536, etc. The 8.8.8.8 form is the most common. The latter three
 originated on BSD.

 Furthermore, the integer can be expressed in decimal, octal, or hexadecimal
 notation. Hexadecimal numbers have a '0x' prefix. Octal numbers have a '0'
 prefix.

 Examples:

   135.246.4.40 255.255.255.255   - Single host.
   135.246.4.0  0xFF.255.0777.0   - Class C subnet.
   135.246.4.0/24                 - Same as above in CIDR IP format.
   135.246.0/16                   - Class B subnet.
   135.0/8                        - Class A subnet in CIDR IP format.
   0 0                            - The entire Internet
   0/0                            - Same as above in CIDR IP format.

& SITE_CHARS
SITE_CHARS

  CONFIG PARAMETER: site_chars <number>
  DEFAULT: 25

  Specifies the length of the hostname that is shown in a wizard WHO
  listing. If <number> is 0, then the hostname will be shown in full.

& SLAY
SLAY

  COMMAND: slay <player/object>

  Kills the indicated player or object without paying any insurance to the
  victim.  It should be used in places where suicide should not be rewarded.

  Related Topics: kill, IMMORTAL.

& SPACE_COMPRESS
SPACE_COMPRESS

  CONFIG PARAMETER: space_compress <yes/no>
  DEFAULT: yes

  Specifies whether or not extra spaces are to be removed from user input
  as it is processed.  If enabled, multiple spaces are compressed to a single
  space, and spaces at the ends of strings are removed.

& SQL_DATABASE
SQL_DATABASE

  CONFIG PARAMETER: sql_database <string>
  DEFAULT: None

  Specifies the name of the SQL database.

  This option is only available if FIRANMUX is enabled.

  Related Topics: sql_user, sql_user, and sql_password.

& SQL_PASSWORD
SQL_PASSWORD

  CONFIG PARAMETER: sql_password <string>
  DEFAULT: None

  Specifies the password for the SQL session.

  This option is only available if FIRANMUX is enabled.

  Related Topics: sql_server, sql_user, and sql_database.

& SQL_SERVER
SQL_SERVER

  CONFIG PARAMETER: sql_server <string>
  DEFAULT: None

  Specifies the host name of the SQL server.

  This option is only available if FIRANMUX is enabled.

  Related Topics: sql_user, sql_password, and sql_database.

& SQL_USER
SQL_USER

  CONFIG PARAMETER: sql_user <string>
  DEFAULT: None

  Specifies the user name for the SQL session.

  This option is only available if FIRANMUX is enabled.

  Related Topics: sql_server, sql_password, and sql_database.

& STACK_LIMIT
STACK_LIMIT

  CONFIG PARAMETER: stack_limit <number>
  DEFAULT: 50

  The number of items that are allowed on an object's stack. You should be
  sparse with this parameter, as stack items are retained until they are
  removed.

& STARTING_MONEY
STARTING_MONEY

  CONFIG PARAMETER: starting_money <amount>
  DEFAULT: 0

  Sets the amount of money that new players start out with.

  Related Topics: paycheck.

& STARTING_QUOTA
STARTING_QUOTA

  CONFIG PARAMETER: starting_quota <amount>
  DEFAULT: 20

  Sets the building quota that players receive when they are created, whether
  by @pcreate or the connection screen.

  Related Topics: @quota, quotas.

& STARTUP
STARTUP

  FLAG: STARTUP(z) (all types)

  This flag is managed internally by the server and it is not directly
  settable.  It indicates whether or not the object has a STARTUP attribute
  that is to be run when the MUX is booted.  This saves a considerable amount
  of time considering that very few objects have a STARTUP attribute.
  This flag is set automatically when the STARTUP attribute is set to a
  non-empty string, and cleared when the STARTUP attribute is removed or
  set to a null string.

  Related Topics: @startup.

& STATUS_FILE
STATUS_FILE

  CONFIG PARAMETER: status_file <filename>
  DEFAULT: shutdown.status

  If you give an argument to the @shutdown command, that argument is written
  out to the file named by this directive.  The file can be used by an
  auto-restart script to decide whether or not to bring the MUX back up,
  for instance.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

& STRIPPED_FLAGS
STRIPPED_FLAGS

  CONFIG PARAMETER: stripped_flags <flags>
  DEFAULT: BLIND CONNECTED GAGGED HEAD_FLAG IMMORTAL INHERIT
           ROYALTY SLAVE STAFF SUSPECT UNINSPECTED WIZARD

  Modifies the set of flags that are stripped from objects during @chown,
  @chownall, @clone, @chzone, and guest creation.  Flags prefixed by a !
  remove the indicated flag from the set.

  Related Topics: @chown, @chownall, @chzone, @clone.

& SUSPECT
SUSPECT

  FLAG: SUSPECT(u) (players)

  When set on a player, causes connects, disconnects, name changes, kills, and
  attempted kills to be reported to all connected wizards.  All commands from
  a SUSPECT-set player are potentially logged as controlled by the 'log'
  configuration option.

  This flag is only visible and settable by wizards.

  Related Topics: log

& SUSPECT_SITE
SUSPECT_SITE

  CONFIG PARAMETER: suspect_site <site>

  Indicates that sites whose address matches the specified <site> are to be
  considered suspect, and any player creates, connects and disconnects are to
  be reported to all logged-in wizards.

  Related Topics: trust_site, SITE LISTS, SITE NOTATION.

& SWEEP_DARK
SWEEP_DARK

  CONFIG PARAMETER: sweep_dark <yes/no>
  DEFAULT: no

  Indicates whether or not players are allowed to @sweep dark places they do not
  control.

  Related Topics: @sweep.

& SWITCH_DEFAULT_ALL
SWITCH_DEFAULT_ALL

  CONFIG PARAMETER: switch_default_all <yes/no>
  DEFAULT: yes

  Indicates whether the @switch command should perform the commands for all
  targets that match or just the first one that matches if you don't specify
  either /all or /first as a command switch.

& TERSE_SHOWS_CONTENTS
TERSE_SHOWS_CONTENTS

  CONFIG PARAMETER: terse_shows_contents <yes/no>
  DEFAULT: yes

  Indicates whether or not to suppress the listing of a location's contents
  when producing TERSE output (whether from an automatic look or a 'real'
  look if look_obey_terse is turned on.

  Related Topics: look_obey_terse, terse_shows_exits,
                  terse_shows_move_messages.

& TERSE_SHOWS_CONTENTS
TERSE_SHOWS_CONTENTS

  CONFIG PARAMETER: terse_shows_contents <yes/no>
  DEFAULT: yes

  Indicates whether or not to suppress the listing of a location's contents
  when producing TERSE output (whether from an automatic look or a 'real'
  look if look_obey_terse is turned on.

  Related Topics: look_obey_terse, terse_shows_exits,
                  terse_shows_move_messages.

& TERSE_SHOWS_EXITS
TERSE_SHOWS_EXITS

  CONFIG PARAMETER: terse_shows_exits <yes/no>
  DEFAULT: yes

  Indicates whether or not to suppress the listing of a location's obvious
  exits when producing TERSE output (whether from an automatic look or a
  'real' look if look_obey_terse is turned on.

  Related Topics: look_obey_terse, terse_shows_contents,
                  terse_shows_move_messages.

& TERSE_SHOWS_MOVE_MESSAGES
TERSE_SHOWS_MOVE_MESSAGES

  CONFIG PARAMETER: terse_shows_move_messages <yes/no>
  DEFAULT: yes

  Indicates whether or not to suppress messages related to moving about
  produced by locations and exits.  These messages are the ENTER and LEAVE
  messages on locations, and the SUCC and DROP messages on exits.
  The messages seen by others (Oxxx attributes) and the actions to be
  performed (Axxx attributes) are unaffected.

  Related Topics: look_obey_terse, terse_shows_contents, terse_shows_exits.

& THING_FLAGS
THING_FLAGS

  CONFIG PARAMETER: thing_flags <flags>.
  DEFAULT: blank

  Modifies the set of flags that a thing receives when it is @created.
  Flags prefixed by a ! remove the indicated flag from the set.

  Related Topics: @list, exit_flags, player_flags, robot_flags, room_flags.

& THING_QUOTA
THING_QUOTA

  CONFIG PARAMETER: thing_quota <amount>
  DEFAULT: 1

  Sets how much quota it costs to create a thing (and also how much the
  remaining quota is increased when a thing is @destroyed.

  Related Topics: @quota, exit_quota, player_quota, room_quota, QUOTAS.

& TIMESLICE
TIMESLICE

  CONFIG PARAMETER: timeslice <seconds>
  DEFAULT: 1.000

  Specifies the interval (in seconds) at which connected users' command quotas
  are increased.  Each command a user types in (commands executed by machines
  do not count) decreases that user's quota by 1, and the user's commands are
  only executed if the quota is greater than zero.

  Related Topics: command_quota_incr, command_quota_max.

& TOAD_RECIPIENT
TOAD_RECIPIENT

  CONFIG PARAMETER: toad_recipient <player dbref>

  This is a configuration parameter; as such dbrefs should be given as the raw
  number and not be preceded by the usual '#' (this is interpreted the
  beginning of a comment by the config file parser).

  Default: #-1 (-1)

  When a player is @toaded (or @nuked) his or her property is normally @chowned
  to another player; toad_recipient controls who the recipient of the player's
  objects are. If the value is set to -1 the @toading wizard will get ownership
  of all the victim's objects, otherwise the specified player gets ownership.
  This can be explicitly overridden by providing a recipient with the @toad
  command.

  @toad/@nuke are potential security risks as they normally change the
  ownership of a victim (a non-privileged character and presumably untrusted
  player) to a player with wizard permissions. Furthermore, this can cause
  clutter and it can be often difficult to sort out unwanted objects after an
  @toading.

  It is recommended that games create a non-privileged character for the
  express purpose of being a toad_recipient.

  Example:
   > @pcreate Nobody=noone
   New player 'Nobody' created with password 'noone'
             (dbref of #57)

   > @admin toad_recipient=57

  Related Topics: @admin, @toad, @nuke, config parameters.

& TOPICS
TOPICS

  Help available on the following Topics:

  CAUTIONS           CONFIG PARAMETERS  DEBUG FEATURES     FILES
  FLAGS              INHERITANCE        LOGGING            MASTER ROOM
  PERMISSIONS        SEARCH CRITERIA    SIGNALS            SITE LISTS

& TRACE_OUTPUT_LIMIT
TRACE_OUTPUT_LIMIT

  CONFIG PARAMETER: trace_output_limit <amount>
  DEFAULT: 200

  Specifies the maximum number of lines of trace output that will be displayed
  when using top-down format.  Bottom-up format output is not affected by this
  parameter.

  Note that this parameter is intended as a limit on the amount of memory used
  to store intermediate data and not on the quantity of trace output, top-down
  format needs to keep all intermediate results in memory before displaying
  them, while bottom-up format displays them immediately after generating them.

  When trace output lines are discarded, only the last (trace_output_limit)
  lines are kept.  These lines contain information about the evaluations done
  earliest in the process of evaluating the expression (usually the innermost
  evaluations and earlier arguments of outer functions).

& TRACE_TOPDOWN
TRACE_TOPDOWN

  CONFIG PARAMETER: trace_topdown <yes/no>
  DEFAULT: yes

  Specifies whether TRACE output is displayed top-down (complete evaluation
  shown first, followed by sub-evaluations), or bottom-up (sub-evaluations
  shown first, followed by the larger evaluation of which they are a part).

& TRUST_SITE
TRUST_SITE

  CONFIG PARAMETER: trust_site <site>

  Indicates that sites whose address matches the specified <site> are not to
  be considered suspect.

  Related Topics: suspect_site, SITE LISTS, SITE NOTATION.

& UNCOMPRESS_PROGRAM
UNCOMPRESS_PROGRAM

  CONFIG PARAMETER: uncompress_program <path>.
  DEFAULT: gunzip

  Specifies the program to be run to uncompress compressed database files when
  reading them in at startup.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: compress_program, compression.

& UNOWNED_SAFE
UNOWNED_SAFE

  CONFIG PARAMETER: unowned_safe <yes/no>.
  DEFAULT: no

  Indicates whether or not objects not owned by you are automatically
  considered SAFE.  (This parameter only affects wizards)  Note that players
  are always considered SAFE, and DESTROY_OK things are never considered SAFE.

  Related Topics: @destroy, DESTROY_OK, SAFE.

& USER_ATTR_ACCESS
USER_ATTR_ACCESS

  CONFIG PARAMETER: user_attr_access [!]<privilege> [[!]<privilege>]...

  Changes the access flags that new user-named attributes receive when
  they are created.  By default, user attributes are invisible to others.

& USER_ATTR_PER_HOUR
USER_ATTR_PER_HOUR

  CONFIG PARAMETER: user_attr_per_hour <max>
  DEFAULT: 5000

  Specifies the maximum number of user-defined attributes per hour that
  a mortal may create.  Attempts to create user-defined attributes after
  this limit has been reached are denied.  Only new names are affected.
  Use of a pre-existing name is not counted towards this limit.

  Related Topics: mail_per_hour, pcreate_per_hour

& WAIT_COST
WAIT_COST

  CONFIG PARAMETER: wait_cost <amount>.
  DEFAULT: 10

  Sets the amount of money that it costs to run the @wait command and other
  actions that add commands to the queue.  The money is refunded when the
  command is removed from the queue (either when it is executed or by @halt).

  Related Topics: @wait.

& WHO
WHO

  COMMAND: WHO <prefix>

  The WHO command returns miscellaneous information about connected players.
  It returns the player name, connect time, idle time, and player flags just
  like the player WHO command (which is available as the DOING command), but
  returns the following information in place of the player's Doing string:

     Room         - The room that the player is in.
     Commands     - The number of commands that the player has entered during
                    this session (not counting machine commands).
     Host flags   - located between the Commands and Host fields:
                    F(forbidden), R(registration), +(suspect).
     Host         - The Internet host name or address from where the player has
                    connected.

  Related Topics: SESSION, DOING.

& WIZARD
WIZARD

  FLAG: WIZARD(W) (all types)

  A player or object that is set WIZARD controls all of the objects in the
  database (except for player #1), regardless of their ownership or flags.
  In general, WIZARDs can do anything using #<number> or *<player>.
  Wizards can also use many additional commands that are useful for game
  administration and maintenance.
  Only player #1 can set or clear this flag.  An object owned by a Wizard has
  wizard privileges only if its WIZARD or INHERIT flag is set, or if the
  owning Wizard has his INHERIT flag set.

  Related Topics: CONTROL, INHERIT.

& WIZARD_MOTD_FILE
WIZARD_MOTD_FILE

  CONFIG PARAMETER: wizard_motd_file <path>
  DEFAULT: text/wizmotd.txt

  Specifies the name of the file that contains the wizard MOTD message that
  is displayed to wizards when they log in.  This message is displayed in
  addition to the wizard MOTD message that is set by the @motd/wiz command or
  the wizard_motd_message config parameter.  The contents of the file are
  read in to a cache when the game is started and whenever a @readcache
  command is executed.

  This configuration option cannot be changed after the server starts.  It
  can only be changed via the configuration file.

  Related Topics: @readcache, wizard_motd_message.

& WIZARD_MOTD_MESSAGE
WIZARD_MOTD_MESSAGE

  CONFIG PARAMETER: wizard_motd_message <message>
  DEFAULT: blank

  Sets the wizard MOTD message that is displayed to wizards when they log in.
  This message is displayed in addition to the contents of the wizmotd.txt
  file.  It can be changed with the @motd/wiz command and examined by the
  @listmotd command.

  Related Topics: @listmotd, @motd, motd_message, wizard_motd_file.

& WIZHELP
WIZHELP

  COMMAND: wizhelp <topic>

  Displays information from the wizard help file.  The information is
  typically of use only to wizards and/or the game maintainer.

  Related Topics: the source code.

& WIZ_ALWAYS_REAL
WIZ_ALWAYS_REAL

  CONFIG PARAMETER: wiz_always_real <0/1>
  DEFAULT: 0

  If 1, then players flagged royalty and above are always real for
  everything and everything is real for them.

  NOTE: This feature is not available unless reality levels was enabled at 
  compile-time.

& ZONE_RECURSION_LIMIT
ZONE_RECURSION_LIMIT

  CONFIG PARAMETER: zone_recursion_limit <num>
  DEFAULT: 20

  This directive specifies how far back to check a zone tree for control and
  commands.

