Unicode ident
=============

[github](https://github.com/dtolnay/unicode-ident)
[crates.io](https://crates.io/crates/unicode-ident)
[docs.rs](https://docs.rs/unicode-ident)
[build status](https://github.com/dtolnay/unicode-ident/actions?query=branch%3Amaster)

Implementation of [Unicode Standard Annex #31][tr31] for determining which
`char` values are valid in programming language identifiers.

[tr31]: https://www.unicode.org/reports/tr31/

This crate is a better optimized implementation of the older `unicode-xid`
crate. This crate uses less static storage, and is able to classify both ASCII
and non-ASCII codepoints with better performance, 2–10× faster than
`unicode-xid`.

## Comparison of performance

The following table shows a comparison between five Unicode identifier
implementations.

- `unicode-ident` is this crate;
- [`unicode-xid`] is a widely used crate run by the "unicode-rs" org;
- `ucd-trie` and `fst` are two data structures supported by the [`ucd-generate`] tool;
- [`roaring`] is a Rust implementation of Roaring bitmap.

The *static storage* column shows the total size of `static` tables that the
crate bakes into your binary, measured in 1000s of bytes.

The remaining columns show the **cost per call** to evaluate whether a single
`char` has the XID\_Start or XID\_Continue Unicode property, comparing across
different ratios of ASCII to non-ASCII codepoints in the input data.

[`unicode-xid`]: https://github.com/unicode-rs/unicode-xid
[`ucd-generate`]: https://github.com/BurntSushi/ucd-generate
[`roaring`]: https://github.com/RoaringBitmap/roaring-rs

| | static storage | 0% nonascii | 1% | 10% | 100% nonascii |
|---|---|---|---|---|---|
| **`unicode-ident`** | 10.1 K | 0.96 ns | 0.95 ns | 1.09 ns | 1.55 ns |
| **`unicode-xid`** | 11.5 K | 1.88 ns | 2.14 ns | 3.48 ns | 15.63 ns |
| **`ucd-trie`** | 10.2 K | 1.29 ns | 1.28 ns | 1.36 ns | 2.15 ns |
| **`fst`** | 139 K | 55.1 ns | 54.9 ns | 53.2 ns | 28.5 ns |
| **`roaring`** | 66.1 K | 2.78 ns | 3.09 ns | 3.37 ns | 4.70 ns |

Source code for the benchmark is provided in the *bench* directory of this repo
and may be repeated by running `cargo criterion`.

## Comparison of data structures

#### unicode-xid

They use a sorted array of character ranges, and do a binary search to look up
whether a given character lands inside one of those ranges.

```rust
static XID_Continue_table: [(char, char); 763] = [
    ('\u{30}', '\u{39}'),  // 0-9
    ('\u{41}', '\u{5a}'),  // A-Z
    …
    ('\u{e0100}', '\u{e01ef}'),
];
```

The static storage used by this data structure scales with the number of
contiguous ranges of identifier codepoints in Unicode. Every table entry
consumes 8 bytes, because it consists of a pair of 32-bit `char` values.

In some ranges of the Unicode codepoint space, this is quite a sparse
representation – there are some ranges where tens of thousands of adjacent
codepoints are all valid identifier characters. In other places, the
representation is quite inefficient. A characater like `µ` (U+00B5) which is
surrounded by non-identifier codepoints consumes 64 bits in the table, while it
would be just 1 bit in a dense bitmap.

On a system with 64-byte cache lines, binary searching the table touches 7 cache
lines on average. Each cache line fits only 8 table entries. Additionally, the
branching performed during the binary search is probably mostly unpredictable to
the branch predictor.

Overall, the crate ends up being about 10× slower on non-ASCII input
compared to the fastest crate.

A potential improvement would be to pack the table entries more compactly.
Rust's `char` type is a 21-bit integer padded to 32 bits, which means every
table entry is holding 22 bits of wasted space, adding up to 3.9 K. They could
instead fit every table entry into 6 bytes, leaving out some of the padding, for
a 25% improvement in space used. With some cleverness it may be possible to fit
in 5 bytes or even 4 bytes by storing a low char and an extent, instead of low
char and high char. I don't expect that performance would improve much but this
could be the most efficient for space across all the libraries, needing only
about 7 K to store.

#### ucd-trie

Their data structure is a compressed trie set specifically tailored for Unicode
codepoints. The design is credited to Raph Levien in [rust-lang/rust#33098].

[rust-lang/rust#33098]: https://github.com/rust-lang/rust/pull/33098

```rust
pub struct TrieSet {
    tree1_level1: &'static [u64; 32],
    tree2_level1: &'static [u8; 992],
    tree2_level2: &'static [u64],
    tree3_level1: &'static [u8; 256],
    tree3_level2: &'static [u8],
    tree3_level3: &'static [u64],
}
```

It represents codepoint sets using a trie to achieve prefix compression. The
final states of the trie are embedded in leaves or "chunks", where each chunk is
a 64-bit integer. Each bit position of the integer corresponds to whether a
particular codepoint is in the set or not. These chunks are not just a compact
representation of the final states of the trie, but are also a form of suffix
compression. In particular, if multiple ranges of 64 contiguous codepoints have
the same Unicode properties, then they all map to the same chunk in the final
level of the trie.

Being tailored for Unicode codepoints, this trie is partitioned into three
disjoint sets: tree1, tree2, tree3. The first set corresponds to codepoints \[0,
0x800), the second \[0x800, 0x10000) and the third \[0x10000, 0x110000). These
partitions conveniently correspond to the space of 1 or 2 byte UTF-8 encoded
codepoints, 3 byte UTF-8 encoded codepoints and 4 byte UTF-8 encoded codepoints,
respectively.

Lookups in this data structure are significantly more efficient than binary
search. A lookup touches either 1, 2, or 3 cache lines based on which of the
trie partitions is being accessed.

One possible performance improvement would be for this crate to expose a way to
query based on a UTF-8 encoded string, returning the Unicode property
corresponding to the first character in the string. Without such an API, the
caller is required to tokenize their UTF-8 encoded input data into `char`, hand
the `char` into `ucd-trie`, only for `ucd-trie` to undo that work by converting
back into the variable-length representation for trie traversal.

#### fst

Uses a [finite state transducer][fst]. This representation is built into
[ucd-generate] but I am not aware of any advantage over the `ucd-trie`
representation. In particular `ucd-trie` is optimized for storing Unicode
properties while `fst` is not.

[fst]: https://github.com/BurntSushi/fst
[ucd-generate]: https://github.com/BurntSushi/ucd-generate

As far as I can tell, the main thing that causes `fst` to have large size and
slow lookups for this use case relative to `ucd-trie` is that it does not
specialize for the fact that only 21 of the 32 bits in a `char` are meaningful.
There are some dense arrays in the structure with large ranges that could never
possibly be used.

#### roaring

This crate is a pure-Rust implementation of [Roaring Bitmap], a data structure
designed for storing sets of 32-bit unsigned integers.

[Roaring Bitmap]: https://roaringbitmap.org/about/

Roaring bitmaps are compressed bitmaps which tend to outperform conventional
compressed bitmaps such as WAH, EWAH or Concise. In some instances, they can be
hundreds of times faster and they often offer significantly better compression.

In this use case the performance was reasonably competitive but still
substantially slower than the Unicode-optimized crates. Meanwhile the
compression was significantly worse, requiring 6× as much storage for the
data structure.

I also benchmarked the [`croaring`] crate which is an FFI wrapper around the C
reference implementation of Roaring Bitmap. This crate was consistently about
15% slower than pure-Rust `roaring`, which could just be FFI overhead. I did not
investigate further.

[`croaring`]: https://crates.io/crates/croaring

#### unicode-ident

This crate is most similar to the `ucd-trie` library, in that it's based on
bitmaps stored in the leafs of a trie representation, achieving both prefix
compression and suffix compression.

The key differences are:

- Uses a single 2-level trie, rather than 3 disjoint partitions of different
  depth each.
- Uses significantly larger chunks: 512 bits rather than 64 bits.
- Compresses the XID\_Start and XID\_Continue properties together
  simultaneously, rather than duplicating identical trie leaf chunks across the
  two.

The following diagram show the XID\_Start and XID\_Continue Unicode boolean
properties in uncompressed form, in row-major order:

 XID_Start XID_Continue

 XID_Start bitmap
 XID_Continue bitmap

Uncompressed, these would take 140 K to store, which is beyond what would be
reasonable. However, as you can see there is a large degree of similarity
between the two bitmaps and across the rows, which lends well to compression.

This crate stores one 512-bit "row" of the above bitmaps in the leaf level of a
trie, and a single additional level to index into the leafs. It turns out there
are 124 unique 512-bit chunks across the two bitmaps so 7 bits are sufficient to
index them.

The chunk size of 512 bits is selected as the size that minimizes the total size
of the data structure. A smaller chunk, like 256 or 128 bits, would achieve
better deduplication but require a larger index. A larger chunk would increase
redundancy in the leaf bitmaps. 512 bit chunks are the optimum for total size of
the index plus leaf bitmaps.

In fact since there are only 124 unique chunks, we can use an 8-bit index with a
spare bit to index at the half-chunk level. This achieves an additional 8.5%
compression by eliminating redundancies between the second half of any chunk and
the first half of any other chunk. Note that this is not the same as using
chunks which are half the size, because it does not necessitate raising the size
of the trie's first level.

In contrast to binary search or the `ucd-trie` crate, performing lookups in this
data structure is straight-line code with no need for branching.

```asm
is_xid_start:
	mov eax, edi
	shr eax, 9
	lea rcx, [rip + unicode_ident::tables::TRIE_START]
	add rcx, rax
	xor eax, eax
	cmp edi, 201728
	cmovb rax, rcx
	test rax, rax
	lea rcx, [rip + .L__unnamed_1]
	cmovne rcx, rax
	movzx eax, byte ptr [rcx]
	shl rax, 5
	mov ecx, edi
	shr ecx, 3
	and ecx, 63
	add rcx, rax
	lea rax, [rip + unicode_ident::tables::LEAF]
	mov al, byte ptr [rax + rcx]
	and dil, 7
	mov ecx, edi
	shr al, cl
	and al, 1
	ret
```


## License

Use of the Unicode Character Database, as this crate does, is governed by the Unicode License Agreement – Data Files and Software
(2016).

All intellectual property within this crate that is **not generated** using the
Unicode Character Database as input is licensed under either of Apache License, Version 2.0 or MIT license at your option.

The **generated** files incorporate tabular data derived from the Unicode
Character Database, together with intellectual property from the original source
code content of the crate. One must comply with the terms of both the Unicode
License Agreement and either of the Apache license or MIT license when those
generated files are involved.

Unless you explicitly state otherwise, any contribution intentionally submitted
for inclusion in this crate by you, as defined in the Apache-2.0 license, shall
be licensed as just described, without any additional terms or conditions.
