detci(1)

NAME
detci - Determinant Configuration Interaction Program

DESCRIPTION

The program detci diagonalizes the nonrelativistic electronic Hamiltonian operator in a basis of Slater determinants. The set of determinants used (CI space) may be chosen in a variety of ways. The program can handle any CI space which can be formulated as a Restricted Active Space CI. This includes CISD, CISDT, CISDTQ, etc., up to Full CI, as well as multireference CI's in which the references are chosen as all determinants in which up to n electrons are excited in some MO active space. This includes CISD[T], CISD[TQ], and second-order CI (SOCI).

REFERENCES

Restricted Active Space CI:

1.  Determinant Based Configuration Interaction Algorithms for Complete and Restricted Configuration Interaction Spaces, J. Olsen, B. O. Roos, P. Jorgensen, and H. J. Aa. Jensen, J. Chem. Phys. 89, 2185 (1988).

2.  Passing the One-Billion Limit in Full Configuration-Interaction (FCI) Calculations, J. Olsen, P. Jorgensen, and J. Simons, Chem. Phys. Lett. 169, 463 (1990).

Tertiary virtual subspaces (RAS IV):

1.  Compact Variational Wavefunctions Incorporating Limited Triple and Quadruple Excitations, C. D. Sherrill and H. F. Schaefer, J. Phys. Chem. 100, 6069-6075 (1996).

DETCI Program:

1.  C. D. Sherrill, Computational Algorithms for Large-Scale Full and Multi-Reference Configuration Interaction Wavefunctions, PhD thesis, University of Georgia, Athens, GA, 1996.

FILES REQUIRED
    input.dat          - Input file
    file71             - Transformed one-electron integrals
    file72             - Transformed two-electron integrals

TEMPORARY FILES USED
    file50             - Diagonal of Hamiltonian
    file51             - CI vectors
    file52             - Sigma vectors
    file53             - D file (correction vectors)

FILES UPDATED
    output.dat         - Output file

INPUT FORMAT

The following command-line arguments are available:

-quiet
    This gives the same result as PRINT=0.

-o fname
    Gives the filename for the output file. Defaults to output.dat.

-e  This option causes the total CI energy or energies to be written to a file called detci_energies.dat.

-c value
    Gives a looser convergence on the CI vector, useful in DETCAS calculations. The value is a real number, not an integer as in CONVERGENCE. The convergence used will be the looser of value and CONVERGENCE.

    Additional input for this program is read from the file The following keywords are valid:

CONVERGENCE = integer
    Convergence desired on the CI vector. Convergence is achieved when the RMS of the error in the CI vector is less than 10**(-n). The default is 4 for energies and 7 for gradients. This is not the same CI vector convergence criterion as found in GUGACI.

DOCC = integer_array
    This vector gives the number of doubly occupied orbitals in each irrep. There is no default.

SOCC = integer_array
    This vector gives the number of singly occupied orbitals in each irrep. There is no default.

DIAG_METHOD = string
    This specifies which method is to be used in diagonalizing the Hamiltonian. The valid options are: RSP, to form the entire H matrix and diagonalize using libciomr to obtain all eigenvalues (n.b. requires HUGE memory); OLSEN, to use Olsen's preconditioned inverse subspace method (1990); MITRUSHENKOV, to use a 2x2 Olsen/Davidson method; and DAVIDSON (or SEM) to use Liu's Simultaneous Expansion Method, which is identical to the Davidson method if only one root is to be found. There also exists a SEM debugging mode, SEMTEST. The SEM method is the most robust, but it also requires 2(N*M)+1 CI vectors on disk, where N is the maximum number of iterations and M is the number of roots.

PRECONDITIONER = string
    This specifies the type of preconditioner to use in the selected diagonalization method. The valid options are: DAVIDSON which approximates the Hamiltonian matrix by the diagonal elements; H0BLOCK_INV which uses an exact Hamiltonian of H0_BLOCKSIZE and explicitly inverts it; GEN_DAVIDSON which does a spectral decomposition of H0BLOCK; ITER_INV using an iterative approach to obtain the correction vector of H0BLOCK. The H0BLOCK_INV, GEN_DAVIDSON, and ITER_INV approaches are all formally equivalent but the ITER_INV is less computationally expensive. Default is DAVIDSON.

REFERENCE = string
    This specifies the type of reference function. This is RHF or ROHF. UHF and TWOCON are not supported. For ROHF, a multiplicity of 1 implies an open-shell singlet. The program will run for open-shell singlets, but it has not been properly adapted to use a correct two-determinant reference in this case, so running with open-shell singlet references is not advised except for full CI's.

UPDATE = string
    DAVIDSON employs the standard DAVIDSON update or correction vector formula, while OLSEN uses the OLSEN correction vector. Default is DAVIDSON.

HD_OTF = boolean
    If TRUE the diagonal elements of the Hamiltonian matrix are computed on-the-fly, otherwise a diagonal element vector is written to a separate file on disk. Default is TRUE.

HD_AVE = string
    HD_EXACT uses the exact diagonal energies which results in expansion vectors which break spin symmetry. HD_KAVE averages the diagonal energies over a spin-coupling set yielding spin pure expansion vectors. ORB_ENER employs the sum of orbital energy approximation giving spin pure expansion vectors but usually doubles the number of davidson iterations. EVANGELISTI uses the sums and differences of orbital energies with the SCF reference energy to produce spin pure expansion vectors. LEININGER approximation which subtracts the one-electron contribution from the orbital energies, multiplies by 0.5, and adds the one-electron contribution back in, producing spin pure expansion vectors and developed by yours truly and works as well as EVANGELISTI.

NODFILE = boolean
    Only possible if NUM_ROOTS = 1. Uses the last vector space in the BVEC file to write scratch DVEC rather than using a separate DVEC file.

ENERGY_CONVERGENCE = integer
    Convergence desired on the CI energy. The default is 6 for single point energies and 8 for gradients or CASSCF.

EX_LVL = integer
    Excitation level for excitations into virtual orbitals (default 2, i.e. CISD).

VAL_EX_LVL = integer
    Excitation level for references in orbitals of RAS II. Defaults to zero.

FCI = boolean
    If this flag is set to TRUE, then the storage of strings is simplified for a Full CI and the calculation requires less overhead. However, the final results should be identical to those when FCI = FALSE. May cause unpredictable results if FCI = TRUE but EX_LVL is not consistent with a Full CI.

FROZEN_DOCC = integer_array
    The number of lowest energy doubly occupied orbitals in each irreducible representation from which there will be no excitations. The Cotton ordering of the irredicible representations is used. The default is the zero vector.

FROZEN_UOCC = integer_vector
    The number of highest energy unoccupied orbitals in each irreducible representation into which there will be no excitations. The default is the zero vector.

FREEZE_CORE =  boolean
    This option determines whether the frozen core orbitals are to be included implicitly (true) or explicitly (false). In the former case, the energetic contributions from the frozen core orbitals are folded into the one-electron integrals and into the "frozen core energy" computed by the transformation program. The default is true.

EXPORT_VECTOR = boolean
    This specifies whether to store converged vector(s) at the end of the run. The vector(s) is(are) stored in a transparent format such that other programs can use it easily. The format is specified in src/lib/libqt/slaterdset.h. The default is false.

NUM_EXPORT = integer
    If EXPORT_VECTOR is set to true, the this determines the number of vectors that need to be exported at the end of the run. The default is 1.

GUESS_VECTOR = string
    This specifies which type of guess vector to use in the CI iteration. Currently only used by the SEM iteration method. Accepted values are UNIT for a unit vector guess (NUM_ROOTS and NUM_INIT_VECS must both be 1); H0_BLOCK to use eigenvectors from the H0 BLOCK submatrix (default); DFILE to use NUM_ROOTS previously converged vectors in the D file; and MP2 to use the MP2 wavefunction as a guess (not working at the moment).

H0_BLOCKSIZE = integer
    This parameter specifies the size of the "H0" block of the Hamiltonian which is solved exactly. The n determinants with the lowest SCF energy are selected, and a submatrix of the Hamiltonian is formed using these determinants. This submatrix is used to accelerate convergence of the CI iterations in the OLSEN and MITRUSHENKOV iteration schemes, and also to find a good starting guess for the SEM method if GUESS_VECTOR = H0_BLOCK. Defaults to 40. Note that the program may change the given size for Ms=0 cases (Ms0 = TRUE) if it determines that the H0 block includes only one member of a pair of determinants related by time reversal symmetry. For very small block sizes, this could conceivably eliminate the entire H0 block; the program should print warnings if this occurs.

H0_BLOCK_COUPLING_SIZE =  integer
    Parameters which specifies the size of the coupling block within the generalized davidson preconditioner. Default value is 1000.

MAX_DET =  integer
    Sets the maximum number of determinants; if the CI space is larger than this, the program aborts. This option exists to ensure that very large calculations are not run by accident. During the current developmental phase, the default is 10000, but it will be raised before long.

MAXITER = integer
    Maximum number of iterations to diagonalize the Hamiltonian. Defaults to 12.

Ms0 = boolean
    If TRUE, use the Ms=0 component of the state. Defaults to TRUE if closed-shell and to FALSE otherwise. Related to the S parameter.

NPRINT = integer
    This value specifies the number of determinants which will be printed, along with their coefficients, in the list of most important determinants in the final CI vector. The default is 20.

NUM_ROOTS = integer
    This value gives the number of roots which are to be obtained from the secular equations. The default is one. If more than one root is required, set DIAG_METHOD to SEM (or, for very small cases, RSP or SEMTEST).

NUM_INIT_VECS = integer
    The number of initial vectors to use in the CI iterative procedure. Defaults to the number of roots.

OPDM = boolean
    If TRUE calculate the one-particle density matrix and make OPDM_WRITE default to TRUE. The default value of OPDM is FALSE.

OPDM_FILE = integer
    File (unit number) for writing the one-particle density matrix if OPDM_WRITE = TRUE. The default value is currently 73.

OPDM_WRITE = boolean
    Flag for whether or not to write the one-particle density matrix to disk.

OPDM_PRINT = boolean
    Flag for whether or not to print the one-particle density matrix.

OPDM_DIAG = boolean
    Flag for whether or not to diagonalize the one-particle density matrix.

WRTNOS = boolean
    Flag for whether or not to write the CI natural orbitals to PSIF_CHKPT.

ORBSFILE = integer
    File (unit number) for writing various CI natural orbitals. The default value is 76.

OPDM_AVE = boolean
    Flag for whether or not to average the OPDM over several roots in order to obtain a state-average one-particle density matrix. This density matrix can be diagonalized to obtain the CI natural orbitals.

ORBS_ROOT = integer
    Flag for setting the root number for which CI natural orbitals are written to PSIF_CHKPT. The default value is 1 (lowest root).

PRINT = integer
    This option determines the verbosity of the output. A value of 1 or 2 specifies minimal printing, a value of 3 specifies verbose printing. Values of 4 or 5 are used for debugging. Do not use level 5 unless the test case is very small (e.g. STO H2O CISD).

ROOT = integer
    The root to write out the two-particle density matrix for (the one-particle density matrices are written for all roots). Useful for a state-specific CASSCF or CI optimization on an excited state.

S = integer
    The value of the spin quantum number S is given by this option. The default is 0 (singlet). The only thing this is actually used for is determining the phase of the redundant half of the CI vector when the Ms=0 component is used (i.e., Ms0 = TRUE). For cases where S is not an integer, this parameter need not be entered because such a state can't have an Ms=0 component.

TPDM = boolean
    If TRUE calculate the two-particle density matrix and make TPDM_WRITE default to TRUE. The default value of TPDM is FALSE.

TPDM_FILE = integer
    File (unit number) for writing the two-particle density matrix if TPDM_WRITE = TRUE. The default value is currently 74.

TPDM_WRITE = boolean
    Flag for whether or not to write the two-particle density matrix to disk.

TPDM_PRINT = boolean
    Flag for whether or not to print the two-particle density matrix. Typically a very bad idea except for debugging small cases.

There is also some less commonly used input, which novice uses of PSI will have no need to use.

BENDAZZOLI = boolean
    Use some routines to calculate sigma based on the papers of Bendazzoli et al. Seems to be slower and not worthwhile; may disappear eventually. Works only for full CI and I don't remember if I could see how their clever scheme might be extended to RAS in general.

CALC_SSQ = boolean
    If TRUE, calculate the expectation value of the S^2 operator for the final CI wavefunction for each root. In principle, DETCI should yield S^2 eigenfunctions. The default is FALSE.

COLLAPSE_SIZE  integer
    Gives the number of vectors to retain when the Davidson subspace is collapsed (see MAXNVECT below). If greater than one, the collapsed subspace retains the best estimate of the CI vector for the previous n iterations. Defaults to 1.

FIRST_TMP_UNIT = integer
    Gives the file (unit) number associated with the first scratch file used by DETCI. Other scratch files are numbered consecutively from this point, int the order H(diag), C, S, D. Each of these logical files takes up a number of physical files specified by the even more obscure input parameters NUM_HD_TMP_UNITS, NUM_C_TMP_UNITS, NUM_S_TMP_UNITS, NUM_D_TMP_UNITS. The user can also specify different starting points for each of these sets using the parameters FIRST_HD_TMP_UNIT and so forth. Splitting a file across several units may help avoid the size-of-integer problem in addressing large files that is present in DETCI and in PSI I/O libraries; but then again, I haven't tested it to see what happens. The first unit of each section is printed out under the heading FILES in the parameter output beginning the DETCI run.

FZC = boolean
    Determines whether the frozen core orbitals are treated as truly frozen (i.e., absent entirely from calculation, FZC = TRUE) or whether they are present but restricted to be doubly occupied (FZC = FALSE). In the GUGA CI program, this is the distinction between what it calls FZC and COR orbitals. Generally, the integrals for frozen core orbitals are not needed by DETCI but they may be needed for MCSCF or gradients.

ICORE = integer
    Specifies how to handle buffering of CI vectors. A value of 0 makes the program perform I/O one RAS subblock at a time; 1 uses entire CI vectors at a time; and 2 uses one irrep block at a time. Values of 0 or 2 cause some inefficiency in the I/O (requiring multiple reads of the C vector when constructing H in the iterative subspace if DIAG_METHOD = SEM), but require less core memory.

ISTOP = boolean
    If TRUE then DETCI will stop after string information is formed and before integrals are read. May eventually change to an integer so that the user can select from multiple stopping points.

MAXNVECT = integer
    Gives the maximum number of Davidson subspace vectors which can be held on disk for the CI coefficient and sigma vectors. (There is one H(diag) vector and the number of D vectors is equal to the number of roots). When the number of vectors on disk reaches the value of MAXNVECT, the Davidson subspace will be collapsed to COLLAPSE_SIZE vectors for each root. This is very helpful for saving disk space. Defaults to MAXITER * NUM_ROOTS + NUM_INIT_VECS.

MIXED = boolean
    This determines whether "mixed" RAS II/RAS III excitations are allowed into the CI space. This is useful for placing additional constraints on a RAS CI.

MIXED4 = boolean
    This is similar to the MIXED keyword, but refers to excitations into RAS IV.

NUNITS = integer
    Number of scratch files to be used in storing the C vectors (and also for the sigma vectors).

OEI_ERASE = boolean
    This determines whether the program erases the one-electron integrals file after it has been read. The default will eventually be true, but during development the default is false.

OEI_FILE = integer
    This keyword allows the user to specify the transformed one-electron integral file. The default is 71.

PRINT_CIBLKS = boolean
    Specifies whether the program should print out a summary of all the blocks in the CI vector (which can be cast into matrix form, see refs.)

R4S = boolean
    Restricts the RAS IV strings to the minimal set, saving memory. If you are concerned about this option, you should write David for advice unless you are a DETCI expert.

REF_SYM = integer
    This option allows the user to look for CI vectors of a different irrep than the reference. This probably only makes sense for Full CI, and it would probably not work with unit vector guesses. Numbering starts from zero for the totally-symmetric irrep.

REPL_OTF = boolean
    Tells DETCI whether or not to do string replacements on the fly. Can save a gigantic amount of memory (especially for truncated CI's) but is somewhat flaky and hasn't been tested for a while. As I recall, it only works for certain classes of RAS calculations. Contact David for assistance. Eventually, the on-the-fly replacement stuff should be redone in a much smarter way so that it doesn't take eons of CPU time. Work along these lines was once started and may be completed eventually.

RESTART = boolean
    This option allows the user to resume a DETCI iteration that terminated prematurely. It assumes that the CI and sigma vectors are on disk; the number of vectors specified by RESTART_VECS is collapsed down to one vector per root.

RESTART_VECS = integer
    If RESTART = TRUE this specifies the number of CI (and sigma) vectors to read from disk. Typically this is the number of successfully completed iterations from a previous run times the number of roots for that run.

TEI_ERASE = boolean
    This determines whether the program erases the two-electron integrals file after it has been read. The default will eventually be true, but during development the default is false.

TEI_FILE = integer
    This keyword allows the user to specify the transformed two-electron integral file. The default is 72.

MPN = boolean
    When this option is TRUE DETCI will compute the MPn series out to kth order where k is determined by maxnvect. For open-shell systems (REF=ROHF, WFN = ZAPTN), DETCI will compute the ZAPTn series. GUESS_VECTOR must be set to TRUE. HD_OTF must be set to TRUE. HD_AVE must be set to orb_ener.

SAVE_MPN2 =  integer
    When MPN is TRUE and WIGNER is TRUE then this option becomes valid. If set to 1 then MP(2n-1) energy is saved. If set to 2 then MP(2n-2) energy is saved. If any other value MPn energy is saved. The default is 0.