# this is an example config file for pcb2gcode.
# place this in the same directory as your gerber files to save typing


# You may want to uncomment and change those in local project files
#front=board.front.gbr
#back=board.back.gbr
#outline=board.outline.gbr
#drill=board.plated-drill.cnc


# The board outline is 10mil wide, no holes
fill-outline = yes
outline-width = 0.010

# parameters for isolation routing / engraving / etching
#offset=1			# uncomment for voronoi regions
#offset=0.010		# uncomment for 20mil isolator
zwork=-0.008
zsafe=0.08
mill-feed=6
mill-speed=30000


# parameters for cutting out boards
cutter-diameter=0.03937
zcut=-0.08
cut-feed=3
cut-speed=20000
cut-infeed=0.1


# drilling parameters
zdrill=-0.08
zchange=0.8
drill-feed=3
drill-speed=20000
