\input texinfo
@setfilename Design_of_GNU_Parallel.info

@settitle Design of GNU Parallel

@node Top
@top Design of GNU Parallel

@node Design of GNU Parallel
@chapter Design of GNU Parallel

This document describes design decisions made in the development of
GNU @strong{parallel} and the reasoning behind them. It will give an
overview of why some of the code looks the way it does, and will help
new maintainers understand the code better.

@node One file program
@section One file program

GNU @strong{parallel} is a Perl script in a single file. It is object
oriented, but contrary to normal Perl scripts each class is not in its
own file. This is due to user experience: The goal is that in a pinch
the user will be able to get GNU @strong{parallel} working simply by copying
a single file: No need to mess around with environment variables like
PERL5LIB.

@node Choice of programming language
@section Choice of programming language

GNU @strong{parallel} is designed to be able to run on old systems. That
means that it cannot depend on a compiler being installed - and
especially not a compiler for a language that is younger than 20 years
old.

The goal is that you can use GNU @strong{parallel} on any system, even if
you are not allowed to install additional software.

Of all the systems I have experienced, I have yet to see a system that
had GCC installed that did not have Perl. The same goes for Rust, Go,
Haskell, and other younger languages. I have, however, seen systems
with Perl without any of the mentioned compilers.

Most modern systems also have either Python2 or Python3 installed, but
you still cannot be certain which version, and since Python2 cannot
run under Python3, Python is not an option.

Perl has the added benefit that implementing the @{= perlexpr =@}
replacement string was fairly easy.

The primary drawback is that Perl is slow. So there is an overhead of
3-10 ms/job and 1 ms/MB output (and even more if you use @strong{@asis{}-@asis{}-@asis{}tag}).

@node Old Perl style
@section Old Perl style

GNU @strong{parallel} uses some old, deprecated constructs. This is due to a
goal of being able to run on old installations. Currently the target
is CentOS 3.9 and Perl 5.8.0.

@node Scalability up and down
@section Scalability up and down

The smallest system GNU @strong{parallel} is tested on is a 32 MB ASUS
WL500gP. The largest is a 2 TB 128-core machine. It scales up to
around 100 machines - depending on the duration of each job.

@node Exponentially back off
@section Exponentially back off

GNU @strong{parallel} busy waits. This is because the reason why a job is
not started may be due to load average (when using @strong{@asis{}-@asis{}-@asis{}load}), and
thus it will not make sense to just wait for a job to finish. Instead
the load average must be rechecked regularly. Load average is not the
only reason: @strong{@asis{}-@asis{}-@asis{}timeout} has a similar problem.

To not burn up too much CPU GNU @strong{parallel} sleeps exponentially
longer and longer if nothing happens, maxing out at 1 second.

@node Shell compatibility
@section Shell compatibility

It is a goal to have GNU @strong{parallel} work equally well in any
shell. However, in practice GNU @strong{parallel} is being developed in
@strong{bash} and thus testing in other shells is limited to reported bugs.

When an incompatibility is found there is often not an easy fix:
Fixing the problem in @strong{csh} often breaks it in @strong{bash}. In these
cases the fix is often to use a small Perl script and call that.

@node env_parallel
@section env_parallel

@strong{env_parallel} is a dummy shell script that will run if
@strong{env_parallel} is not an alias or a function and tell the user how to
activate the alias/function for the supported shells.

The alias or function will copy the current environment and run the
command with GNU @strong{parallel} in the copy of the environment.

The problem is that you cannot access all of the current environment
inside Perl. E.g. aliases, functions and unexported shell variables.

The idea is therefore to take the environment and put it in
@strong{$PARALLEL_ENV} which GNU @strong{parallel} prepends to every command.

The only way to have access to the environment is directly from the
shell, so the program must be written in a shell script that will be
sourced and there has to deal with the dialect of the relevant shell.

@node env_parallel.*
@subsection env_parallel.*

These are the files that implements the alias or function
@strong{env_parallel} for a given shell. It could be argued that these
should be put in some obscure place under /usr/lib, but by putting
them in your path it becomes trivial to find the path to them and
@strong{source} them:

@verbatim
  source `which env_parallel.foo`
@end verbatim

The beauty is that they can be put anywhere in the path without the
user having to know the location. So if the user's path includes
/afs/bin/i386_fc5 or /usr/pkg/parallel/bin or
/usr/local/parallel/20161222/sunos5.6/bin the files can be put in the
dir that makes most sense for the sysadmin.

@node env_parallel.bash / env_parallel.sh / env_parallel.ash / env_parallel.dash / env_parallel.zsh / env_parallel.ksh / env_parallel.mksh
@subsection env_parallel.bash / env_parallel.sh / env_parallel.ash / env_parallel.dash / env_parallel.zsh / env_parallel.ksh / env_parallel.mksh

@strong{env_parallel.(bash|sh|ash|dash|ksh|mksh|zsh)} defines the function
@strong{env_parallel}. It uses @strong{alias} and @strong{typeset} to dump the
configuration (with a few exceptions) into @strong{$PARALLEL_ENV} before
running GNU @strong{parallel}.

After GNU @strong{parallel} is finished, @strong{$PARALLEL_ENV} is deleted.

@node env_parallel.csh
@subsection env_parallel.csh

@strong{env_parallel.csh} has two purposes: If @strong{env_parallel} is not an
alias: make it into an alias that sets @strong{$PARALLEL} with arguments
and calls @strong{env_parallel.csh}.

If @strong{env_parallel} is an alias, then @strong{env_parallel.csh} uses
@strong{$PARALLEL} as the arguments for GNU @strong{parallel}.

It exports the environment by writing a variable definition to a file
for each variable.  The definitions of aliases are appended to this
file. Finally the file is put into @strong{$PARALLEL_ENV}.

GNU @strong{parallel} is then run and @strong{$PARALLEL_ENV} is deleted.

@node env_parallel.fish
@subsection env_parallel.fish

First all functions definitions are generated using a loop and
@strong{functions}.

Dumping the scalar variable definitions is harder.

@strong{fish} can represent non-printable characters in (at least) 2
ways. To avoid problems all scalars are converted to \XX quoting.

Then commands to generate the definitions are made and separated by
NUL.

This is then piped into a Perl script that quotes all values. List
elements will be appended using two spaces.

Finally \n is converted into \1 because @strong{fish} variables cannot
contain \n. GNU @strong{parallel} will later convert all \1 from
@strong{$PARALLEL_ENV} into \n.

This is then all saved in @strong{$PARALLEL_ENV}.

GNU @strong{parallel} is called, and @strong{$PARALLEL_ENV} is deleted.

@node parset (supported in sh@comma{} ash@comma{} dash@comma{} bash@comma{} zsh@comma{} ksh@comma{} mksh)
@section parset (supported in sh, ash, dash, bash, zsh, ksh, mksh)

@strong{parset} is a shell function. This is the reason why @strong{parset} can
set variables: It runs in the shell which is calling it.

It is also the reason why @strong{parset} does not work, when data is piped
into it: @strong{... | parset ...} makes @strong{parset} start in a subshell, and
any changes in environment can therefore not make it back to the
calling shell.

@node Job slots
@section Job slots

The easiest way to explain what GNU @strong{parallel} does is to assume that
there are a number of job slots, and when a slot becomes available a
job from the queue will be run in that slot. But originally GNU
@strong{parallel} did not model job slots in the code. Job slots have been
added to make it possible to use @strong{@{%@}} as a replacement string.

While the job sequence number can be computed in advance, the job slot
can only be computed the moment a slot becomes available. So it has
been implemented as a stack with lazy evaluation: Draw one from an
empty stack and the stack is extended by one. When a job is done, push
the available job slot back on the stack.

This implementation also means that if you re-run the same jobs, you
cannot assume jobs will get the same slots. And if you use remote
executions, you cannot assume that a given job slot will remain on the
same remote server. This goes double since number of job slots can be
adjusted on the fly (by giving @strong{@asis{}-@asis{}-@asis{}jobs} a file name).

@node Rsync protocol version
@section Rsync protocol version

@strong{rsync} 3.1.x uses protocol 31 which is unsupported by version
2.5.7. That means that you cannot push a file to a remote system using
@strong{rsync} protocol 31, if the remote system uses 2.5.7. @strong{rsync} does
not automatically downgrade to protocol 30.

GNU @strong{parallel} does not require protocol 31, so if the @strong{rsync}
version is >= 3.1.0 then @strong{@asis{}-@asis{}-@asis{}protocol 30} is added to force newer
@strong{rsync}s to talk to version 2.5.7.

@node Compression
@section Compression

GNU @strong{parallel} buffers output in temporary files.  @strong{@asis{}-@asis{}-@asis{}compress}
compresses the buffered data.  This is a bit tricky because there
should be no files to clean up if GNU @strong{parallel} is killed by a power
outage.

GNU @strong{parallel} first selects a compression program. If the user has
not selected one, the first of these that is in $PATH is used: @strong{pzstd
lbzip2 pbzip2 zstd pixz lz4 pigz lzop plzip lzip gzip lrz pxz bzip2
lzma xz clzip}. They are sorted by speed on a 128 core machine.

Schematically the setup is as follows:

@verbatim
  command started by parallel | compress > tmpfile
  cattail tmpfile | uncompress | parallel which reads the output
@end verbatim

The setup is duplicated for both standard output (stdout) and standard
error (stderr).

GNU @strong{parallel} pipes output from the command run into the compression
program which saves to a tmpfile. GNU @strong{parallel} records the pid of
the compress program.  At the same time a small Perl script (called
@strong{cattail} above) is started: It basically does @strong{cat} followed by
@strong{tail -f}, but it also removes the tmpfile as soon as the first byte
is read, and it continuously checks if the pid of the compression
program is dead. If the compress program is dead, @strong{cattail} reads the
rest of tmpfile and exits.

As most compression programs write out a header when they start, the
tmpfile in practice is removed by @strong{cattail} after around 40 ms.

More detailed it works like this:

@verbatim
  bash ( command ) |
    sh ( emptywrapper ( bash ( compound compress ) ) >tmpfile )
  cattail ( rm tmpfile; compound decompress ) < tmpfile
@end verbatim

This complex setup is to make sure compress program is only started if
there is input. This means each job will cause 8 processes to run. If
combined with @strong{@asis{}-@asis{}-@asis{}keep-order} these processes will run until the job
has been printed.

@node Wrapping
@section Wrapping

The command given by the user can be wrapped in multiple
templates. Templates can be wrapped in other templates.

@table @asis
@item @strong{$COMMAND}
@anchor{@strong{$COMMAND}}

the command to run.

@item @strong{$INPUT}
@anchor{@strong{$INPUT}}

the input to run.

@item @strong{$SHELL}
@anchor{@strong{$SHELL}}

the shell that started GNU Parallel.

@item @strong{$SSHLOGIN}
@anchor{@strong{$SSHLOGIN}}

the sshlogin.

@item @strong{$WORKDIR}
@anchor{@strong{$WORKDIR}}

the working dir.

@item @strong{$FILE}
@anchor{@strong{$FILE}}

the file to read parts from.

@item @strong{$STARTPOS}
@anchor{@strong{$STARTPOS}}

the first byte position to read from @strong{$FILE}.

@item @strong{$LENGTH}
@anchor{@strong{$LENGTH}}

the number of bytes to read from @strong{$FILE}.

@item @asis{}-@asis{}-@asis{}shellquote
@anchor{@asis{}-@asis{}-@asis{}shellquote}

echo @emph{Double quoted $INPUT}

@item @asis{}-@asis{}-@asis{}nice @emph{pri}
@anchor{@asis{}-@asis{}-@asis{}nice @emph{pri}}

Remote: See @strong{The remote system wrapper}.

Local: @strong{setpriority(0,0,$nice)}

@item @asis{}-@asis{}-@asis{}cat
@anchor{@asis{}-@asis{}-@asis{}cat}

@verbatim
  cat > {}; $COMMAND {};
  perl -e '$bash = shift;
    $csh = shift;
    for(@ARGV) { unlink;rmdir; }
    if($bash =~ s/h//) { exit $bash;  }
    exit $csh;' "$?h" "$status" {};
@end verbatim

@{@} is set to @strong{$PARALLEL_TMP} which is a tmpfile. The Perl script
saves the exit value, unlinks the tmpfile, and returns the exit value
- no matter if the shell is @strong{bash}/@strong{ksh}/@strong{zsh} (using $?) or
@strong{*csh}/@strong{fish} (using $status).

@item @asis{}-@asis{}-@asis{}fifo
@anchor{@asis{}-@asis{}-@asis{}fifo}

@verbatim
  perl -e '($s,$c,$f) = @ARGV;
    # mkfifo $PARALLEL_TMP
    system "mkfifo", $f;
    # spawn $shell -c $command &
    $pid = fork || exec $s, "-c", $c;
    open($o,">",$f) || die $!;
    # cat > $PARALLEL_TMP
    while(sysread(STDIN,$buf,131072)){
       syswrite $o, $buf;
    }
    close $o;
    # waitpid to get the exit code from $command
    waitpid $pid,0;
    # Cleanup
    unlink $f;
    exit $?/256;' $SHELL -c $COMMAND $PARALLEL_TMP
@end verbatim

This is an elaborate way of: mkfifo @{@}; run @strong{$COMMAND} in the
background using @strong{$SHELL}; copying STDIN to @{@}; waiting for background
to complete; remove @{@} and exit with the exit code from @strong{$COMMAND}.

It is made this way to be compatible with @strong{*csh}/@strong{fish}.

@item @asis{}-@asis{}-@asis{}pipepart
@anchor{@asis{}-@asis{}-@asis{}pipepart}

@verbatim
  < $FILE perl -e 'while(@ARGV) {
      sysseek(STDIN,shift,0) || die;
      $left = shift;
      while($read =
            sysread(STDIN,$buf,
                    ($left > 131072 ? 131072 : $left))){
        $left -= $read;
        syswrite(STDOUT,$buf);
      }
    }' $STARTPOS $LENGTH
@end verbatim

This will read @strong{$LENGTH} bytes from @strong{$FILE} starting at @strong{$STARTPOS}
and send it to STDOUT.

@item @asis{}-@asis{}-@asis{}sshlogin $SSHLOGIN
@anchor{@asis{}-@asis{}-@asis{}sshlogin $SSHLOGIN}

@verbatim
  ssh $SSHLOGIN "$COMMAND"
@end verbatim

@item @asis{}-@asis{}-@asis{}transfer
@anchor{@asis{}-@asis{}-@asis{}transfer}

@verbatim
  ssh $SSHLOGIN mkdir -p ./$WORKDIR;
  rsync --protocol 30 -rlDzR \
        -essh ./{} $SSHLOGIN:./$WORKDIR;
  ssh $SSHLOGIN "$COMMAND"
@end verbatim

Read about @strong{@asis{}-@asis{}-@asis{}protocol 30} in the section @strong{Rsync protocol version}.

@item @asis{}-@asis{}-@asis{}transferfile @emph{file}
@anchor{@asis{}-@asis{}-@asis{}transferfile @emph{file}}

<<todo>>

@item @asis{}-@asis{}-@asis{}basefile
@anchor{@asis{}-@asis{}-@asis{}basefile}

<<todo>>

@item @asis{}-@asis{}-@asis{}return @emph{file}
@anchor{@asis{}-@asis{}-@asis{}return @emph{file}}

@verbatim
  $COMMAND; _EXIT_status=$?; mkdir -p $WORKDIR;
  rsync --protocol 30 \
    --rsync-path=cd\ ./$WORKDIR\;\ rsync \
    -rlDzR -essh $SSHLOGIN:./$FILE ./$WORKDIR;
  exit $_EXIT_status;
@end verbatim

The @strong{@asis{}-@asis{}-@asis{}rsync-path=cd ...} is needed because old versions of @strong{rsync}
do not support @strong{@asis{}-@asis{}-@asis{}no-implied-dirs}.

The @strong{$_EXIT_status} trick is to postpone the exit value. This makes it
incompatible with @strong{*csh} and should be fixed in the future. Maybe a
wrapping 'sh -c' is enough?

@item @asis{}-@asis{}-@asis{}cleanup
@anchor{@asis{}-@asis{}-@asis{}cleanup}

$RETURN is the wrapper from @strong{@asis{}-@asis{}-@asis{}return}

@verbatim
  $COMMAND; _EXIT_status=$?; $RETURN;
  ssh $SSHLOGIN \(rm\ -f\ ./$WORKDIR/{}\;\
                  rmdir\ ./$WORKDIR\ \>\&/dev/null\;\);
  exit $_EXIT_status;
@end verbatim

@strong{$_EXIT_status}: see @strong{@asis{}-@asis{}-@asis{}return} above.

@item @asis{}-@asis{}-@asis{}pipe
@anchor{@asis{}-@asis{}-@asis{}pipe}

@verbatim
  perl -e 'if(sysread(STDIN, $buf, 1)) {
        open($fh, "|-", "@ARGV") || die;
        syswrite($fh, $buf);
        # Align up to 128k block
        if($read = sysread(STDIN, $buf, 131071)) {
            syswrite($fh, $buf);
        }
        while($read = sysread(STDIN, $buf, 131072)) {
            syswrite($fh, $buf);
        }
        close $fh;
        exit ($?&127 ? 128+($?&127) : 1+$?>>8)
    }' $SHELL -c $COMMAND
@end verbatim

This small wrapper makes sure that @strong{$COMMAND} will never be run if
there is no data.

@item @asis{}-@asis{}-@asis{}tmux
@anchor{@asis{}-@asis{}-@asis{}tmux}

<<TODO Fixup with '-quoting>>
mkfifo /tmp/tmx3cMEV &&
  sh -c 'tmux -S /tmp/tmsaKpv1 new-session -s p334310 -d "sleep .2" >/dev/null 2>&1';
tmux -S /tmp/tmsaKpv1 new-window -t p334310 -n wc\ 10 \(wc\ 10\)\;\ perl\ -e\ \'while\(\$t++\<3\)\@{\ print\ \$ARGV\[0\],\"\\n\"\ \@}\'\ \$\?h/\$status\ \>\>\ /tmp/tmx3cMEV\&echo\ wc\\\ 10\;\ echo\ \Job\ finished\ at:\ \`date\`\;sleep\ 10;
exec perl -e '$/="/";$_=<>;$c=<>;unlink $ARGV; /(\d+)h/ and exit($1);exit$c' /tmp/tmx3cMEV

mkfifo @emph{tmpfile.tmx};
tmux -S <tmpfile.tms> new-session -s p@emph{PID} -d 'sleep .2' >&/dev/null;
tmux -S <tmpfile.tms> new-window -t p@emph{PID} -n <<shell quoted input>> \(<<shell quoted input>>\)\;\ perl\ -e\ \'while\(\$t++\<3\)\@{\ print\ \$ARGV\[0\],\"\\n\"\ \@}\'\ \$\?h/\$status\ \>\>\ @emph{tmpfile.tmx}\&echo\ <<shell double quoted input>>\;echo\ \Job\ finished\ at:\ \`date\`\;sleep\ 10;
exec perl -e '$/="/";$_=<>;$c=<>;unlink $ARGV; /(\d+)h/ and exit($1);exit$c' @emph{tmpfile.tmx}

First a FIFO is made (.tmx). It is used for communicating exit
value. Next a new tmux session is made. This may fail if there is
already a session, so the output is ignored. If all job slots finish
at the same time, then @strong{tmux} will close the session. A temporary
socket is made (.tms) to avoid a race condition in @strong{tmux}. It is
cleaned up when GNU @strong{parallel} finishes.

The input is used as the name of the windows in @strong{tmux}. When the job
inside @strong{tmux} finishes, the exit value is printed to the FIFO (.tmx).
This FIFO is opened by @strong{perl} outside @strong{tmux}, and @strong{perl} then
removes the FIFO. @strong{Perl} blocks until the first value is read from
the FIFO, and this value is used as exit value.

To make it compatible with @strong{csh} and @strong{bash} the exit value is
printed as: $?h/$status and this is parsed by @strong{perl}.

There is a bug that makes it necessary to print the exit value 3
times.

Another bug in @strong{tmux} requires the length of the tmux title and
command to not have certain limits.  When inside these limits, 75 '\ '
are added to the title to force it to be outside the limits.

You can map the bad limits using:

@verbatim
  perl -e 'sub r { int(rand(shift)).($_[0] && "\t".r(@_)) } print map { r(@ARGV)."\n" } 1..10000' 1600 1500 90 |
    perl -ane '$F[0]+$F[1]+$F[2] < 2037 and print ' |
    parallel --colsep '\t' --tagstring '{1}\t{2}\t{3}' tmux -S /tmp/p{%}-'{=3 $_="O"x$_ =}' \
      new-session -d -n '{=1 $_="O"x$_ =}' true'\ {=2 $_="O"x$_ =};echo $?;rm -f /tmp/p{%}-O*'

  perl -e 'sub r { int(rand(shift)).($_[0] && "\t".r(@_)) } print map { r(@ARGV)."\n" } 1..10000' 17000 17000 90 |
    parallel --colsep '\t' --tagstring '{1}\t{2}\t{3}' \
  tmux -S /tmp/p{%}-'{=3 $_="O"x$_ =}' new-session -d -n '{=1 $_="O"x$_ =}' true'\ {=2 $_="O"x$_ =};echo $?;rm /tmp/p{%}-O*'
  > value.csv 2>/dev/null

  R -e 'a<-read.table("value.csv");X11();plot(a[,1],a[,2],col=a[,4]+5,cex=0.1);Sys.sleep(1000)'
@end verbatim

For @strong{tmux 1.8} 17000 can be lowered to 2100.

The interesting areas are title 0..1000 with (title + whole command)
in 996..1127 and 9331..9636.

@end table

The ordering of the wrapping is important:

@itemize
@item $PARALLEL_ENV which is set in env_parallel.* must be prepended to the
command first, as the command may contain exported variables or
functions.

@item @strong{@asis{}-@asis{}-@asis{}nice}/@strong{@asis{}-@asis{}-@asis{}cat}/@strong{@asis{}-@asis{}-@asis{}fifo} should be done on the remote machine

@item @strong{@asis{}-@asis{}-@asis{}pipepart}/@strong{@asis{}-@asis{}-@asis{}pipe} should be done on the local machine inside @strong{@asis{}-@asis{}-@asis{}tmux}

@end itemize

@node Convenience options @asis{}-@asis{}-@asis{}nice @asis{}-@asis{}-@asis{}basefile @asis{}-@asis{}-@asis{}transfer @asis{}-@asis{}-@asis{}return @asis{}-@asis{}-@asis{}cleanup @asis{}-@asis{}-@asis{}tmux @asis{}-@asis{}-@asis{}group @asis{}-@asis{}-@asis{}compress @asis{}-@asis{}-@asis{}cat @asis{}-@asis{}-@asis{}fifo @asis{}-@asis{}-@asis{}workdir @asis{}-@asis{}-@asis{}tag @asis{}-@asis{}-@asis{}tagstring
@section Convenience options @asis{}-@asis{}-@asis{}nice @asis{}-@asis{}-@asis{}basefile @asis{}-@asis{}-@asis{}transfer @asis{}-@asis{}-@asis{}return @asis{}-@asis{}-@asis{}cleanup @asis{}-@asis{}-@asis{}tmux @asis{}-@asis{}-@asis{}group @asis{}-@asis{}-@asis{}compress @asis{}-@asis{}-@asis{}cat @asis{}-@asis{}-@asis{}fifo @asis{}-@asis{}-@asis{}workdir @asis{}-@asis{}-@asis{}tag @asis{}-@asis{}-@asis{}tagstring

These are all convenience options that make it easier to do a
task. But more importantly: They are tested to work on corner cases,
too. Take @strong{@asis{}-@asis{}-@asis{}nice} as an example:

@verbatim
  nice parallel command ...
@end verbatim

will work just fine. But when run remotely, you need to move the nice
command so it is being run on the server:

@verbatim
  parallel -S server nice command ...
@end verbatim

And this will again work just fine, as long as you are running a
single command. When you are running a composed command you need nice
to apply to the whole command, and it gets harder still:

@verbatim
  parallel -S server -q nice bash -c 'command1 ...; cmd2 | cmd3'
@end verbatim

It is not impossible, but by using @strong{@asis{}-@asis{}-@asis{}nice} GNU @strong{parallel} will do
the right thing for you. Similarly when transferring files: It starts
to get hard when the file names contain space, :, `, *, or other
special characters.

To run the commands in a @strong{tmux} session you basically just need to
quote the command. For simple commands that is easy, but when commands
contain special characters, it gets much harder to get right.

@strong{@asis{}-@asis{}-@asis{}compress} not only compresses standard output (stdout) but also
standard error (stderr); and it does so into files, that are open but
deleted, so a crash will not leave these files around.

@strong{@asis{}-@asis{}-@asis{}cat} and @strong{@asis{}-@asis{}-@asis{}fifo} are easy to do by hand, until you want to clean
up the tmpfile and keep the exit code of the command.

The real killer comes when you try to combine several of these: Doing
that correctly for all corner cases is next to impossible to do by
hand.

@node @asis{}-@asis{}-@asis{}shard
@section @asis{}-@asis{}-@asis{}shard

The simple way to implement sharding would be to:

@enumerate
@item start n jobs,

@item split each line into columns,

@item select the data from the relevant column

@item compute a hash value from the data

@item take the modulo n of the hash value

@item pass the full line to the jobslot that has the computed value

@end enumerate

Unfortunately Perl is rather slow at computing the hash value (and
somewhat slow at splitting into columns).

One solution is to use a compiled language for the splitting and
hashing, but that would go against the design criteria of not
depending on a compiler.

Luckily those tasks can be parallelized. So GNU @strong{parallel} starts n
sharders that do step 2-6, and passes blocks of 100k to each of those
in a round robin manner. To make sure these sharders compute the hash
the same way, $PERL_HASH_SEED is set to the same value for all sharders.

Running n sharders poses a new problem: Instead of having n outputs
(one for each computed value) you now have n outputs for each of the n
values, so in total n*n outputs; and you need to merge these n*n
outputs together into n outputs.

This can be done by simply running 'parallel -j0 @asis{}-@asis{}-@asis{}lb cat :::
outputs_for_one_value', but that is rather inefficient, as it spawns a
process for each file. Instead the core code from 'parcat' is run,
which is also a bit faster.

All the sharders and parcats communicate through named pipes that are
unlinked as soon as they are opened.

@node Shell shock
@section Shell shock

The shell shock bug in @strong{bash} did not affect GNU @strong{parallel}, but the
solutions did. @strong{bash} first introduced functions in variables named:
@emph{BASH_FUNC_myfunc()} and later changed that to
@emph{BASH_FUNC_myfunc%%}. When transferring functions GNU @strong{parallel}
reads off the function and changes that into a function definition,
which is copied to the remote system and executed before the actual
command is executed. Therefore GNU @strong{parallel} needs to know how to
read the function.

From version 20150122 GNU @strong{parallel} tries both the ()-version and
the %%-version, and the function definition works on both pre- and
post-shell shock versions of @strong{bash}.

@node The remote system wrapper
@section The remote system wrapper

The remote system wrapper does some initialization before starting the
command on the remote system.

@node Make quoting unnecessary by hex encoding everything
@subsection Make quoting unnecessary by hex encoding everything

When you run @strong{ssh server foo} then @strong{foo} has to be quoted once:

@verbatim
  ssh server "echo foo; echo bar"
@end verbatim

If you run @strong{ssh server1 ssh server2 foo} then @strong{foo} has to be quoted
twice:

@verbatim
  ssh server1 ssh server2 \'"echo foo; echo bar"\'
@end verbatim

GNU @strong{parallel} avoids this by packing everyting into hex values and
running a command that does not need quoting:

@verbatim
  perl -X -e GNU_Parallel_worker,eval+pack+q/H10000000/,join+q//,@ARGV
@end verbatim

This command reads hex from the command line and converts that to
bytes that are then eval'ed as a Perl expression.

The string @strong{GNU_Parallel_worker} is not needed. It is simply there to
let the user know, that this process is GNU @strong{parallel} working.

@node Ctrl-C and standard error (stderr)
@subsection Ctrl-C and standard error (stderr)

If the user presses Ctrl-C the user expects jobs to stop. This works
out of the box if the jobs are run locally. Unfortunately it is not so
simple if the jobs are run remotely.

If remote jobs are run in a tty using @strong{ssh -tt}, then Ctrl-C works,
but all output to standard error (stderr) is sent to standard output
(stdout). This is not what the user expects.

If remote jobs are run without a tty using @strong{ssh} (without @strong{-tt}),
then output to standard error (stderr) is kept on stderr, but Ctrl-C
does not kill remote jobs. This is not what the user expects.

So what is needed is a way to have both. It seems the reason why
Ctrl-C does not kill the remote jobs is because the shell does not
propagate the hang-up signal from @strong{sshd}. But when @strong{sshd} dies, the
parent of the login shell becomes @strong{init} (process id 1). So by
exec'ing a Perl wrapper to monitor the parent pid and kill the child
if the parent pid becomes 1, then Ctrl-C works and stderr is kept on
stderr.

Ctrl-C does, however, kill the ssh connection, so any output from
a remote dying process is lost.

To be able to kill all (grand)*children a new process group is
started.

@node @asis{}-@asis{}-@asis{}nice
@subsection @asis{}-@asis{}-@asis{}nice

@strong{nice}ing the remote process is done by @strong{setpriority(0,0,$nice)}. A
few old systems do not implement this and @strong{@asis{}-@asis{}-@asis{}nice} is unsupported on
those.

@node Setting $PARALLEL_TMP
@subsection Setting $PARALLEL_TMP

@strong{$PARALLEL_TMP} is used by @strong{@asis{}-@asis{}-@asis{}fifo} and @strong{@asis{}-@asis{}-@asis{}cat} and must point to a
non-exitent file in @strong{$TMPDIR}. This file name is computed on the
remote system.

@node The wrapper
@subsection The wrapper

The wrapper looks like this:

@verbatim
  $shell = $PARALLEL_SHELL || $SHELL;
  $tmpdir = $TMPDIR || $PARALLEL_REMOTE_TMPDIR;
  $nice = $opt::nice;
  $termseq = $opt::termseq;

  # Check that $tmpdir is writable
  -w $tmpdir ||
      die("$tmpdir is not writable.".
        " Set PARALLEL_REMOTE_TMPDIR");
  # Set $PARALLEL_TMP to a non-existent file name in $TMPDIR
  do {
      $ENV{PARALLEL_TMP} = $tmpdir."/par".
        join"", map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..5);
  } while(-e $ENV{PARALLEL_TMP});
  # Set $script to a non-existent file name in $TMPDIR
  do {
      $script = $tmpdir."/par".
        join"", map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..5);
  } while(-e $script);
  # Create a script from the hex code
  # that removes itself and runs the commands
  open($fh,">",$script) || die;
  # ' needed due to rc-shell
  print($fh("rm \'$script\'\n",$bashfunc.$cmd));
  close $fh;
  my $parent = getppid;
  my $done = 0;
  $SIG{CHLD} = sub { $done = 1; };
  $pid = fork;
  unless($pid) {
      # Make own process group to be able to kill HUP it later
      eval { setpgrp };
      # Set nice value
      eval { setpriority(0,0,$nice) };
      # Run the script
      exec($shell,$script);
      die("exec failed: $!");
  }
  while((not $done) and (getppid == $parent)) {
      # Parent pid is not changed, so sshd is alive
      # Exponential sleep up to 1 sec
      $s = $s < 1 ? 0.001 + $s * 1.03 : $s;
      select(undef, undef, undef, $s);
  }
  if(not $done) {
      # sshd is dead: User pressed Ctrl-C
      # Kill as per --termseq
      my @term_seq = split/,/,$termseq;
      if(not @term_seq) {
        @term_seq = ("TERM",200,"TERM",100,"TERM",50,"KILL",25);
      }
      while(@term_seq && kill(0,-$pid)) {
        kill(shift @term_seq, -$pid);
        select(undef, undef, undef, (shift @term_seq)/1000);
      }
  }
  wait;
  exit ($?&127 ? 128+($?&127) : 1+$?>>8)
@end verbatim

@node Transferring of variables and functions
@section Transferring of variables and functions

Transferring of variables and functions given by @strong{@asis{}-@asis{}-@asis{}env} is done by
running a Perl script remotely that calls the actual command. The Perl
script sets @strong{$ENV@{}@emph{variable}@strong{@}} to the correct value before
exec'ing a shell that runs the function definition followed by the
actual command.

The function @strong{env_parallel} copies the full current environment into
the environment variable @strong{PARALLEL_ENV}. This variable is picked up
by GNU @strong{parallel} and used to create the Perl script mentioned above.

@node Base64 encoded bzip2
@section Base64 encoded bzip2

@strong{csh} limits words of commands to 1024 chars. This is often too little
when GNU @strong{parallel} encodes environment variables and wraps the
command with different templates. All of these are combined and quoted
into one single word, which often is longer than 1024 chars.

When the line to run is > 1000 chars, GNU @strong{parallel} therefore
encodes the line to run. The encoding @strong{bzip2}s the line to run,
converts this to base64, splits the base64 into 1000 char blocks (so
@strong{csh} does not fail), and prepends it with this Perl script that
decodes, decompresses and @strong{eval}s the line.

@verbatim
    @GNU_Parallel=("use","IPC::Open3;","use","MIME::Base64");
    eval "@GNU_Parallel";

    $SIG{CHLD}="IGNORE";
    # Search for bzip2. Not found => use default path
    my $zip = (grep { -x $_ } "/usr/local/bin/bzip2")[0] || "bzip2";
    # $in = stdin on $zip, $out = stdout from $zip
    my($in, $out,$eval);
    open3($in,$out,">&STDERR",$zip,"-dc");
    if(my $perlpid = fork) {
        close $in;
        $eval = join "", <$out>;
        close $out;
    } else {
        close $out;
        # Pipe decoded base64 into 'bzip2 -dc'
        print $in (decode_base64(join"",@ARGV));
        close $in;
        exit;
    }
    wait;
    eval $eval;
@end verbatim

Perl and @strong{bzip2} must be installed on the remote system, but a small
test showed that @strong{bzip2} is installed by default on all platforms
that runs GNU @strong{parallel}, so this is not a big problem.

The added bonus of this is that much bigger environments can now be
transferred as they will be below @strong{bash}'s limit of 131072 chars.

@node Which shell to use
@section Which shell to use

Different shells behave differently. A command that works in @strong{tcsh}
may not work in @strong{bash}.  It is therefore important that the correct
shell is used when GNU @strong{parallel} executes commands.

GNU @strong{parallel} tries hard to use the right shell. If GNU @strong{parallel}
is called from @strong{tcsh} it will use @strong{tcsh}.  If it is called from
@strong{bash} it will use @strong{bash}. It does this by looking at the
(grand)*parent process: If the (grand)*parent process is a shell, use
this shell; otherwise look at the parent of this (grand)*parent. If
none of the (grand)*parents are shells, then $SHELL is used.

This will do the right thing if called from:

@itemize
@item an interactive shell

@item a shell script

@item a Perl script in `` or using @strong{system} if called as a single string.

@end itemize

While these cover most cases, there are situations where it will fail:

@itemize
@item When run using @strong{exec}.

@item When run as the last command using @strong{-c} from another shell (because
some shells use @strong{exec}):

@verbatim
  zsh% bash -c "parallel 'echo {} is not run in bash; \
       set | grep BASH_VERSION' ::: This"
@end verbatim

You can work around that by appending '&& true':

@verbatim
  zsh% bash -c "parallel 'echo {} is run in bash; \
       set | grep BASH_VERSION' ::: This && true"
@end verbatim

@item When run in a Perl script using @strong{system} with parallel as the first
string:

@verbatim
  #!/usr/bin/perl

  system("parallel",'setenv a {}; echo $a',":::",2);
@end verbatim

Here it depends on which shell is used to call the Perl script. If the
Perl script is called from @strong{tcsh} it will work just fine, but if it
is called from @strong{bash} it will fail, because the command @strong{setenv} is
not known to @strong{bash}.

@end itemize

If GNU @strong{parallel} guesses wrong in these situation, set the shell using
@strong{$PARALLEL_SHELL}.

@node Always running commands in a shell
@section Always running commands in a shell

If the command is a simple command with no redirection and setting of
variables, the command @emph{could} be run without spawning a
shell. E.g. this simple @strong{grep} matching either 'ls ' or ' wc >> c':

@verbatim
  parallel "grep -E 'ls | wc >> c' {}" ::: foo
@end verbatim

could be run as:

@verbatim
  system("grep","-E","ls | wc >> c","foo");
@end verbatim

However, as soon as the command is a bit more complex a shell @emph{must}
be spawned:

@verbatim
  parallel "grep -E 'ls | wc >> c' {} | wc >> c" ::: foo
  parallel "LANG=C grep -E 'ls | wc >> c' {}" ::: foo
@end verbatim

It is impossible to tell how @strong{| wc >> c} should be
interpreted without parsing the string (is the @strong{|} a pipe in shell or
an alternation in a @strong{grep} regexp?  Is @strong{LANG=C} a command in @strong{csh}
or setting a variable in @strong{bash}? Is @strong{>>} redirection or part
of a regexp?).

On top of this, wrapper scripts will often require a shell to be
spawned.

The downside is that you need to quote special shell chars twice:

@verbatim
  parallel echo '*' ::: This will expand the asterisk
  parallel echo "'*'" ::: This will not
  parallel "echo '*'" ::: This will not
  parallel echo '\*' ::: This will not
  parallel echo \''*'\' ::: This will not
  parallel -q echo '*' ::: This will not
@end verbatim

@strong{-q} will quote all special chars, thus redirection will not work:
this prints '* > out.1' and @emph{does not} save '*' into the file out.1:

@verbatim
  parallel -q echo "*" ">" out.{} ::: 1
@end verbatim

GNU @strong{parallel} tries to live up to Principle Of Least Astonishment
(POLA), and the requirement of using @strong{-q} is hard to understand, when
you do not see the whole picture.

@node Quoting
@section Quoting

Quoting depends on the shell. For most shells '-quoting is used for
strings containing special characters.

For @strong{tcsh}/@strong{csh} newline is quoted as \ followed by newline. Other
special characters are also \-quoted.

For @strong{rc} everything is quoted using '.

@node @asis{}-@asis{}-@asis{}pipepart vs. @asis{}-@asis{}-@asis{}pipe
@section @asis{}-@asis{}-@asis{}pipepart vs. @asis{}-@asis{}-@asis{}pipe

While @strong{@asis{}-@asis{}-@asis{}pipe} and @strong{@asis{}-@asis{}-@asis{}pipepart} look much the same to the user, they are
implemented very differently.

With @strong{@asis{}-@asis{}-@asis{}pipe} GNU @strong{parallel} reads the blocks from standard input
(stdin), which is then given to the command on standard input (stdin);
so every block is being processed by GNU @strong{parallel} itself. This is
the reason why @strong{@asis{}-@asis{}-@asis{}pipe} maxes out at around 500 MB/sec.

@strong{@asis{}-@asis{}-@asis{}pipepart}, on the other hand, first identifies at which byte
positions blocks start and how long they are. It does that by seeking
into the file by the size of a block and then reading until it meets
end of a block. The seeking explains why GNU @strong{parallel} does not know
the line number and why @strong{-L/-l} and @strong{-N} do not work.

With a reasonable block and file size this seeking is more than 1000
time faster than reading the full file. The byte positions are then
given to a small script that reads from position X to Y and sends
output to standard output (stdout). This small script is prepended to
the command and the full command is executed just as if GNU
@strong{parallel} had been in its normal mode. The script looks like this:

@verbatim
  < file perl -e 'while(@ARGV) {
     sysseek(STDIN,shift,0) || die;
     $left = shift;
     while($read = sysread(STDIN,$buf,
                           ($left > 131072 ? 131072 : $left))){
       $left -= $read; syswrite(STDOUT,$buf);
     }
  }' startbyte length_in_bytes
@end verbatim

It delivers 1 GB/s per core.

Instead of the script @strong{dd} was tried, but many versions of @strong{dd} do
not support reading from one byte to another and might cause partial
data. See this for a surprising example:

@verbatim
  yes | dd bs=1024k count=10 | wc
@end verbatim

@node @asis{}-@asis{}-@asis{}block-size adjustment
@section @asis{}-@asis{}-@asis{}block-size adjustment

Every time GNU @strong{parallel} detects a record bigger than
@strong{@asis{}-@asis{}-@asis{}block-size} it increases the block size by 30%. A small
@strong{@asis{}-@asis{}-@asis{}block-size} gives very poor performance; by exponentially
increasing the block size performance will not suffer.

GNU @strong{parallel} will waste CPU power if @strong{@asis{}-@asis{}-@asis{}block-size} does not
contain a full record, because it tries to find a full record and will
fail to do so. The recommendation is therefore to use a
@strong{@asis{}-@asis{}-@asis{}block-size} > 2 records, so you always get at least one full
record when you read one block.

If you use @strong{-N} then @strong{@asis{}-@asis{}-@asis{}block-size} should be big enough to contain
N+1 records.

@node Automatic @asis{}-@asis{}-@asis{}block-size computation
@section Automatic @asis{}-@asis{}-@asis{}block-size computation

With @strong{@asis{}-@asis{}-@asis{}pipepart} GNU @strong{parallel} can compute the @strong{@asis{}-@asis{}-@asis{}block-size}
automatically. A @strong{@asis{}-@asis{}-@asis{}block-size} of @strong{-1} will use a block size so
that each jobslot will receive approximately 1 block.  @strong{@asis{}-@asis{}-@asis{}block -2}
will pass 2 blocks to each jobslot and @strong{-}@emph{n} will pass @emph{n} blocks
to each jobslot.

This can be done because @strong{@asis{}-@asis{}-@asis{}pipepart} reads from files, and we can
compute the total size of the input.

@node @asis{}-@asis{}-@asis{}jobs and @asis{}-@asis{}-@asis{}onall
@section @asis{}-@asis{}-@asis{}jobs and @asis{}-@asis{}-@asis{}onall

When running the same commands on many servers what should @strong{@asis{}-@asis{}-@asis{}jobs}
signify? Is it the number of servers to run on in parallel?  Is it the
number of jobs run in parallel on each server?

GNU @strong{parallel} lets @strong{@asis{}-@asis{}-@asis{}jobs} represent the number of servers to run
on in parallel. This is to make it possible to run a sequence of
commands (that cannot be parallelized) on each server, but run the
same sequence on multiple servers.

@node @asis{}-@asis{}-@asis{}shuf
@section @asis{}-@asis{}-@asis{}shuf

When using @strong{@asis{}-@asis{}-@asis{}shuf} to shuffle the jobs, all jobs are read, then they
are shuffled, and finally executed. When using SQL this makes the
@strong{@asis{}-@asis{}-@asis{}sqlmaster} be the part that shuffles the jobs. The @strong{@asis{}-@asis{}-@asis{}sqlworker}s
simply executes according to Seq number.

@node @asis{}-@asis{}-@asis{}csv
@section @asis{}-@asis{}-@asis{}csv

@strong{@asis{}-@asis{}-@asis{}pipepart} is incompatible with @strong{@asis{}-@asis{}-@asis{}csv} because you can have
records like:

@verbatim
  a,b,c
  a,"
  a,b,c
  a,b,c
  a,b,c
  ",c
  a,b,c
@end verbatim

Here the second record contains a multi-line field that looks like
records. Since @strong{@asis{}-@asis{}-@asis{}pipepart} does not read then whole file when
searching for record endings, it may start reading in this multi-line
field, which would be wrong.

@node Buffering on disk
@section Buffering on disk

GNU @strong{parallel} buffers output, because if output is not buffered you
have to be ridiculously careful on sizes to avoid mixing of outputs
(see excellent example on https://catern.com/posts/pipes.html).

GNU @strong{parallel} buffers on disk in $TMPDIR using files, that are
removed as soon as they are created, but which are kept open. So even
if GNU @strong{parallel} is killed by a power outage, there will be no files
to clean up afterwards. Another advantage is that the file system is
aware that these files will be lost in case of a crash, so it does
not need to sync them to disk.

It gives the odd situation that a disk can be fully used, but there
are no visible files on it.

@node Partly buffering in memory
@subsection Partly buffering in memory

When using output formats SQL and CSV then GNU Parallel has to read
the whole output into memory. When run normally it will only read the
output from a single job. But when using @strong{@asis{}-@asis{}-@asis{}linebuffer} every line
printed will also be buffered in memory - for all jobs currently
running.

If memory is tight, then do not use the output format SQL/CSV with
@strong{@asis{}-@asis{}-@asis{}linebuffer}.

@node Comparing to buffering in memory
@subsection Comparing to buffering in memory

@strong{gargs} is a parallelizing tool that buffers in memory. It is
therefore a useful way of comparing the advantages and disadvantages
of buffering in memory to buffering on disk.

On an system with 6 GB RAM free and 6 GB free swap these were tested
with different sizes:

@verbatim
  echo /dev/zero | gargs "head -c $size {}" >/dev/null
  echo /dev/zero | parallel "head -c $size {}" >/dev/null
@end verbatim

The results are here:

@verbatim
  JobRuntime      Command
       0.344      parallel_test 1M
       0.362      parallel_test 10M
       0.640      parallel_test 100M
       9.818      parallel_test 1000M
      23.888      parallel_test 2000M
      30.217      parallel_test 2500M
      30.963      parallel_test 2750M
      34.648      parallel_test 3000M
      43.302      parallel_test 4000M
      55.167      parallel_test 5000M
      67.493      parallel_test 6000M
     178.654      parallel_test 7000M
     204.138      parallel_test 8000M
     230.052      parallel_test 9000M
     255.639      parallel_test 10000M
     757.981      parallel_test 30000M
       0.537      gargs_test 1M
       0.292      gargs_test 10M
       0.398      gargs_test 100M
       3.456      gargs_test 1000M
       8.577      gargs_test 2000M
      22.705      gargs_test 2500M
     123.076      gargs_test 2750M
      89.866      gargs_test 3000M
     291.798      gargs_test 4000M
@end verbatim

GNU @strong{parallel} is pretty much limited by the speed of the disk: Up to
6 GB data is written to disk but cached, so reading is fast. Above 6
GB data are both written and read from disk. When the 30000MB job is
running, the disk system is slow, but usable: If you are not using the
disk, you almost do not feel it.

@strong{gargs} has a speed advantage up until 2500M where it hits a
wall. Then the system starts swapping like crazy and is completely
unusable. At 5000M it goes out of memory.

You can make GNU @strong{parallel} behave similar to @strong{gargs} if you point
$TMPDIR to a tmpfs-filesystem: It will be faster for small outputs,
but may kill your system for larger outputs and cause you to lose
output.

@node Disk full
@section Disk full

GNU @strong{parallel} buffers on disk. If the disk is full, data may be
lost. To check if the disk is full GNU @strong{parallel} writes a 8193 byte
file every second. If this file is written successfully, it is removed
immediately. If it is not written successfully, the disk is full. The
size 8193 was chosen because 8192 gave wrong result on some file
systems, whereas 8193 did the correct thing on all tested filesystems.

@node Memory usage
@section Memory usage

Normally GNU @strong{parallel} will use around 17 MB RAM constantly - no
matter how many jobs or how much output there is. There are a few
things that cause the memory usage to rise:

@itemize
@item Multiple input sources. GNU @strong{parallel} reads an input source only
once. This is by design, as an input source can be a stream
(e.g. FIFO, pipe, standard input (stdin)) which cannot be rewound and
read again. When reading a single input source, the memory is freed as
soon as the job is done - thus keeping the memory usage constant.

But when reading multiple input sources GNU @strong{parallel} keeps the
already read values for generating all combinations with other input
sources.

@item Computing the number of jobs. @strong{@asis{}-@asis{}-@asis{}bar}, @strong{@asis{}-@asis{}-@asis{}eta}, and @strong{@asis{}-@asis{}-@asis{}halt xx%}
use @strong{total_jobs()} to compute the total number of jobs. It does this
by generating the data structures for all jobs. All these job data
structures will be stored in memory and take up around 400 bytes/job.

@item Buffering a full line. @strong{@asis{}-@asis{}-@asis{}linebuffer} will read a full line per
running job. A very long output line (say 1 GB without \n) will
increase RAM usage temporarily: From when the beginning of the line is
read till the line is printed.

@item Buffering the full output of a single job. This happens when using
@strong{@asis{}-@asis{}-@asis{}results *.csv/*.tsv} or @strong{@asis{}-@asis{}-@asis{}sql*}. Here GNU @strong{parallel} will read
the whole output of a single job and save it as csv/tsv or SQL.

@end itemize

@node Argument separators @asis{:::} @asis{::::} @asis{:::}+ @asis{::::}+
@section Argument separators ::: :::: :::+ ::::+

The argument separator @strong{:::} was chosen because I have never seen
@strong{:::} used in any command. The natural choice @strong{@asis{}-@asis{}-@asis{}} would be a bad
idea since it is not unlikely that the template command will contain
@strong{@asis{}-@asis{}-@asis{}}. I have seen @strong{::} used in programming languanges to separate
classes, and I did not want the user to be confused that the separator
had anything to do with classes.

@strong{:::} also makes a visual separation, which is good if there are
multiple @strong{:::}.

When @strong{:::} was chosen, @strong{::::} came as a fairly natural extension.

Linking input sources meant having to decide for some way to indicate
linking of @strong{:::} and @strong{::::}. @strong{:::+} and @strong{::::+} were chosen, so
that they were similar to @strong{:::} and @strong{::::}.

In 2022 I realized that @strong{///} would have been an even better choice,
because you cannot have an file named @strong{///} whereas you @emph{can} have a
file named @strong{:::}.

@node Perl replacement strings@comma{} @{= =@}@comma{} and @asis{}-@asis{}-@asis{}rpl
@section Perl replacement strings, @{= =@}, and @asis{}-@asis{}-@asis{}rpl

The shorthands for replacement strings make a command look more
cryptic. Different users will need different replacement
strings. Instead of inventing more shorthands you get more
flexible replacement strings if they can be programmed by the user.

The language Perl was chosen because GNU @strong{parallel} is written in
Perl and it was easy and reasonably fast to run the code given by the
user.

If a user needs the same programmed replacement string again and
again, the user may want to make his own shorthand for it. This is
what @strong{@asis{}-@asis{}-@asis{}rpl} is for. It works so well, that even GNU @strong{parallel}'s
own shorthands are implemented using @strong{@asis{}-@asis{}-@asis{}rpl}.

In Perl code the bigrams @strong{@{=} and @strong{=@}} rarely exist. They look like a
matching pair and can be entered on all keyboards. This made them good
candidates for enclosing the Perl expression in the replacement
strings. Another candidate ,, and ,, was rejected because they do not
look like a matching pair. @strong{@asis{}-@asis{}-@asis{}parens} was made, so that the users can
still use ,, and ,, if they like: @strong{@asis{}-@asis{}-@asis{}parens ,,,,}

Internally, however, the @strong{@{=} and @strong{=@}} are replaced by \257< and
\257>. This is to make it simpler to make regular expressions. You
only need to look one character ahead, and never have to look behind.

@node Test suite
@section Test suite

GNU @strong{parallel} uses its own testing framework. This is mostly due to
historical reasons. It deals reasonably well with tests that are
dependent on how long a given test runs (e.g. more than 10 secs is a
pass, but less is a fail). It parallelizes most tests, but it is easy
to force a test to run as the single test (which may be important for
timing issues). It deals reasonably well with tests that fail
intermittently. It detects which tests failed and pushes these to the
top, so when running the test suite again, the tests that failed most
recently are run first.

If GNU @strong{parallel} should adopt a real testing framework then those
elements would be important.

Since many tests are dependent on which hardware it is running on,
these tests break when run on a different hardware than what the test
was written for.

When most bugs are fixed a test is added, so this bug will not
reappear. It is, however, sometimes hard to create the environment in
which the bug shows up - especially if the bug only shows up
sometimes. One of the harder problems was to make a machine start
swapping without forcing it to its knees.

@node Median run time
@section Median run time

Using a percentage for @strong{@asis{}-@asis{}-@asis{}timeout} causes GNU @strong{parallel} to compute
the median run time of a job. The median is a better indicator of the
expected run time than average, because there will often be outliers
taking way longer than the normal run time.

To avoid keeping all run times in memory, an implementation of
remedian was made (Rousseeuw et al).

@node Error messages and warnings
@section Error messages and warnings

Error messages like: ERROR, Not found, and 42 are not very
helpful. GNU @strong{parallel} strives to inform the user:

@itemize
@item What went wrong?

@item Why did it go wrong?

@item What can be done about it?

@end itemize

Unfortunately it is not always possible to predict the root cause of
the error.

@node Determine number of CPUs
@section Determine number of CPUs

CPUs is an ambiguous term. It can mean the number of socket filled
(i.e. the number of physical chips). It can mean the number of cores
(i.e. the number of physical compute cores). It can mean the number of
hyperthreaded cores (i.e. the number of virtual cores - with some of
them possibly being hyperthreaded).

On ark.intel.com Intel uses the terms @emph{cores} and @emph{threads} for
number of physical cores and the number of hyperthreaded cores
respectively.

GNU @strong{parallel} uses uses @emph{CPUs} as the number of compute units and
the terms @emph{sockets}, @emph{cores}, and @emph{threads} to specify how the
number of compute units is calculated.

@node Computation of load
@section Computation of load

Contrary to the obvious @strong{@asis{}-@asis{}-@asis{}load} does not use load average. This is
due to load average rising too slowly. Instead it uses @strong{ps} to list
the number of threads in running or blocked state (state D, O or
R). This gives an instant load.

As remote calculation of load can be slow, a process is spawned to run
@strong{ps} and put the result in a file, which is then used next time.

@node Killing jobs
@section Killing jobs

GNU @strong{parallel} kills jobs. It can be due to @strong{@asis{}-@asis{}-@asis{}memfree}, @strong{@asis{}-@asis{}-@asis{}halt},
or when GNU @strong{parallel} meets a condition from which it cannot
recover. Every job is started as its own process group. This way any
(grand)*children will get killed, too. The process group is killed
with the specification mentioned in @strong{@asis{}-@asis{}-@asis{}termseq}.

@node SQL interface
@section SQL interface

GNU @strong{parallel} uses the DBURL from GNU @strong{sql} to give database
software, username, password, host, port, database, and table in a
single string.

The DBURL must point to a table name. The table will be dropped and
created. The reason for not reusing an existing table is that the user
may have added more input sources which would require more columns in
the table. By prepending '+' to the DBURL the table will not be
dropped.

The table columns are similar to joblog with the addition of @strong{V1}
.. @strong{Vn} which are values from the input sources, and Stdout and
Stderr which are the output from standard output and standard error,
respectively.

The Signal column has been renamed to _Signal due to Signal being a
reserved word in MySQL.

@node Logo
@section Logo

The logo is inspired by the Cafe Wall illusion. The font is DejaVu
Sans.

@node Citation notice
@section Citation notice

For details: See
https://git.savannah.gnu.org/cgit/parallel.git/tree/doc/citation-notice-faq.txt

Funding a free software project is hard. GNU @strong{parallel} is no
exception. On top of that it seems the less visible a project is, the
harder it is to get funding. And the nature of GNU @strong{parallel} is that
it will never be seen by "the guy with the checkbook", but only by the
people doing the actual work.

This problem has been covered by others - though no solution has been
found: https://www.slideshare.net/NadiaEghbal/consider-the-maintainer
https://www.numfocus.org/blog/why-is-numpy-only-now-getting-funded/

Before implementing the citation notice it was discussed with the
users:
https://lists.gnu.org/archive/html/parallel/2013-11/msg00006.html

Having to spend 10 seconds on running @strong{parallel @asis{}-@asis{}-@asis{}citation} once is
no doubt not an ideal solution, but no one has so far come up with an
ideal solution - neither for funding GNU @strong{parallel} nor other free
software.

If you believe you have the perfect solution, you should try it out,
and if it works, you should post it on the email list. Ideas that will
cost work and which have not been tested are, however, unlikely to be
prioritized.

@node Ideas for new design
@chapter Ideas for new design

@node Multiple processes working together
@section Multiple processes working together

Open3 is slow. Printing is slow. It would be good if they did not tie
up resources, but were run in separate threads.

@node @asis{}-@asis{}-@asis{}rrs on remote using a perl wrapper
@section @asis{}-@asis{}-@asis{}rrs on remote using a perl wrapper

... | perl -pe '$/=$recend$recstart;BEGIN@{ if(substr($_) eq $recstart) substr($_)="" @} eof and substr($_) eq $recend) substr($_)=""

It ought to be possible to write a filter that removed rec sep on the
fly instead of inside GNU @strong{parallel}. This could then use more cpus.

Will that require 2x record size memory?

Will that require 2x block size memory?

@node Historical decisions
@chapter Historical decisions

These decisions were relevant for earlier versions of GNU @strong{parallel},
but not the current version. They are kept here as historical record.

@node @asis{}-@asis{}-@asis{}tollef
@section @asis{}-@asis{}-@asis{}tollef

You can read about the history of GNU @strong{parallel} on
https://www.gnu.org/software/parallel/history.html

@strong{@asis{}-@asis{}-@asis{}tollef} was included to make GNU @strong{parallel} switch compatible
with the parallel from moreutils (which is made by Tollef Fog
Heen). This was done so that users of that parallel easily could port
their use to GNU @strong{parallel}: Simply set @strong{PARALLEL="@asis{}-@asis{}-@asis{}tollef"} and
that would be it.

But several distributions chose to make @strong{@asis{}-@asis{}-@asis{}tollef} global (by putting
it into /etc/parallel/config) without making the users aware of this,
and that caused much confusion when people tried out the examples from
GNU @strong{parallel}'s man page and these did not work.  The users became
frustrated because the distribution did not make it clear to them that
it has made @strong{@asis{}-@asis{}-@asis{}tollef} global.

So to lessen the frustration and the resulting support, @strong{@asis{}-@asis{}-@asis{}tollef}
was obsoleted 20130222 and removed one year later.

@bye
