====== Orca Plugin System ======
With the Simple Orca Plugin System (SOPS) you can extend the functionality of the Orca screen reader.
It offers the possibility to add plug-ins in nearly any programming language in an easy way.
The settings for the plug-ins are controlled via the filename.

===== Installation =====
  * Arch:
    * Just Install the package simpleorcapluginsystem from the AUR.
  * Manual:
    * download
    * copy SOPS folder to /usr/share/SOPS/

===== Setup =====
To setup the plug-in system for the current user, run:
/usr/share/SOPS/install-for-current-user.sh

===== Administration =====
==== Basics ====
  *  The Installation path. This contains the default plug-ins, the documentation,the plugin loader and the administration tools: ''/usr/share/SOPS/''
  *  The path for user plug-ins is:
''~/.config/SOPS/plugins-available/''
  *  The following path is used for all enabled (active) plug-ins. All plug-ins in that folder will be loaded, if they are valid:
''~/.config/SOPS/plugins-enabled/''

==== Administration tools ====
The tools are located in the "tools" folder beneath the installation directory. The following command enables/activates a plug-in, but you have to rename the filename to create a shortcut and pass a command to the plug-in:
$ ./ensop <pluginname>
The command to disable and unload a plug-in is: 
$ ./dissop <pluginname>
Both commands basically just create or delete links in ~./.config/SOPSP/plugins-enabled and make the plug-ins executable. You have to configure the plug-ins manually.
Restart Orca to reload the plug-ins after changes. 
SOPS also provides a plug-in manager, it is available after the installation.
To open the plug-in manager use ''orca+ctrl+p'' while Orca is running.
It can be used to activate, deactivate, install or configure plug-ins.
Orca gets re-started automatically after closing the plug-in manager.

===== Plug-ins =====
You can find some fully predefined example plugins in:
 ''/usr/share/SOPS/examples''

==== Structure of the filename ====
The shortcut, plug-in type and preference of a plug-in are controlled by its filename. 
The descriptive part of the filename has to be separated from the preferences part with ''__-__''. 
The commands, modifier and the key has to be separated by ''__+__''.
<description>__-__[<command>__+__command...][__+__<modifier>__+__<modifier>__+__key_<key>].ext

==== Run a plug-in ====
There are two different ways to run a plug-in:

  * shortcut (See [[#Modifiers/ Shortcuts]])
  *  exec run once when the plug-in loads. (See [[#Commands/ Preferences]])

If none of those are present. the plug-in won't load. 
There are some more [[#Commands]] to control the behaviour of a plug-in.

=== Modifiers/ Shortcuts ===
With modifiers you can set different shortcut combinations for a ''key''.
You always have to press the Orca-modifier.
The order of the three modifier keys do not matter:
  *  ''control'' is the modifier for the ''ctrl'' key on the keyboard
  *  ''shift'' is the modifier for the ''shift'' key on the keyboard
  *  ''alt'' is the modifier for the ''alt'' key on the keyboard
  *  ''key_<key>'' defines the basic shortcut that is used for the plug-in, maybe together with the defined modifiers (''example_plugin__-__key_d.sh'' uses ''orca+d'').

== Valid shortcuts ==
Only a few combinations of modifiers are valid. Those are predefined by Orca.
Valid combinations are:
  *  ''alt'' i.e. ''description__-__alt__+__key_y.sh''
  *  ''control'' i.e. ''description__-__control__+__key_b.sh''
  *  ''shift'' i.e. ''description__-__shift__+__key_c.sh''
  *  ''control + alt'' i.e. ''description__-__control__+__alt__+__key_w.py''
  *  ''shift + alt'' i.e. ''description__-__shift__+__alt__+__key_y.sh''
As ''key_<key>'' you can use any alphanumerical key.

=== Commands/ Preferences ===
Preferences for plug-ins are called commands. A command defines the action to pass to the plug-in. 
With commands you control the behaviour of the plug-ins. You may add more than one command. The order of the commands do not matter.
You can use them for all kinds of plug-ins.
  *  ''startnotify'' announces "start <description>" before the plug-in is executed. It is useful as feedback for plug-ins with longer progress times. (all plug-ins)
  *  ''stopnotify'' announces "finish <description>". This is useful as feedback for plug-ins with no output. (all plugins)
  *  ''blockcall'' do not start the plug-in in a thread. Be careful, as this locks Orca until the plug-in is finished. By default, plug-ins each run in a dedicated thread. (all plug-ins)
  *  ''error'' announces returned errors. (all plug-ins)
  *  ''supressoutput'' ignores the output of STDOUT. This is useful for plugins that may have a UI and do not pass output to STDOUT. (sub process plug-in only)
  *  ''parameters_<parameter1> [parameter2] [parameter3]...'' passes the parameters to the plug-in. (sub process plug-in only)
  *  ''exec'' run the plug-in once while loading it. Mostly useful as advanced-plug-in. (all plug-ins)
  *  ''loadmodule'' does not load as a sub process plug-in but loads it as advanced plug-in. (advanced plug-in only)

=== Examples ===
  *  ''Plugin name__-__startnotify__+__control__+__alt__+__key_n.sh'' Run with ''orca+ctrl+alt+n'' and announce the start of the process.
  *  ''PluginName__-__error__+__stopnotify__+__shift__+__key_y.py'' Run with ''orca+shift+m'' and announce the finishing. Does also read occurring errors .
  *  ''Plugin_Name__-__key_m.py'' Run with ''orca+m''
  *  ''Plugin_Name__-__exec.py'' Run once at starting Orca.

==== Types of plug-ins ====
Basically there are two different types of plug-ins.

=== Sub process plug-ins ===
Sub process plug-ins are simple plug-ins of a default type.
They may be any type of application or script that writes to STDOUT or STDERR.
Orca executes the plug-in, reads from STDOUT/ STDERR and announces the result to the user, when the defined shortcut is pressed or the plug-in is executed via ''exec'' while starting the screen reader.

== Requirements ==
  *  Execution permission
  *  ''key_<key>'' or ''exec'' have to be defined in the filename.

== Example ==
Say "Hello World when pressing ''orca+y'':
Filename:''Hello_world__-__key_y.sh''

#!/bin/sh
echo "Hello World"

=== Advanced plug-ins ===
Those type of plug-ins are loaded with the spec.loader.exec_module. you can load them by using ''loadmodule'' in the filename. They are fully integrated into Orca as soon as it starts.
Advanced plug-ins are more powerful, because you are able to work in the Orca context. They are mostly similar to the ''orca-customizations.py''.
See also for "real" Orca scripting:
https://wiki.gnome.org/Projects/Orca/FrequentlyAskedQuestions/CustomizingOrca

== Requirements ==
  *  Correct code written in python3
  *  Fileextension ''.py''
  *  Use ''loadmodule'' in the filename
  *  ''key_<key>'' or ''exec'' have to been defined in filename  

== Example ==
Configure Orca to speak/braille the word "bang" instead of the "!" while loading the plug-in.
Filename:''replace_chnames__-__loadmodule__+__exec.py''

#!/usr/bin/python
import orca.orca
orca.chnames.chnames["!"] = "bang"

===== Plug-in hosting =====
You can also host plug-ins, making them available for installation via the plug-in manager.
If you want to Host plug-ins, read: 
/usr/share/SOPS/tools/hosting.txt
 
The default online resource is:
https://stormdragon.tk/orca-plugins/index.php
