openafs (1.8.0~pre4-1) unstable; urgency=low

    - Client time management support (afsd -settime and afsd -nosettime)
      has been removed.
    - Linux versions prior to 2.6 are no longer supported by the client.

 -- Benjamin Kaduk <kaduk@mit.edu>  Tue, 13 Dec 2016 01:49:46 -0500

openafs (1.5.73.3-1) experimental; urgency=low

  This version of the OpenAFS client is built with experimental
  disconnected support.  This support should not change the normal
  operation of the client unless it is used.  If you wish to use it,
  please be aware that it is an experimental feature, may not work
  correctly, and may lose data.  Disconnected mode is configured through
  the fs discon command, which is not yet documented.

  The communication protocol between afsd (in openafs-client) and the
  OpenAFS kernel module has changed in 1.5.  You must upgrade your kernel
  module to a 1.5.x kernel module when using this or newer versions of
  openafs-client, or OpenAFS will not start correctly.

 -- Russ Allbery <rra@debian.org>  Tue, 06 Apr 2010 14:51:38 -0700

openafs (1.4.10+dfsg1-1) unstable; urgency=high

  This release of OpenAFS contains security fixes in the kernel module.
  Be sure to also upgrade openafs-modules-source, build a new kernel
  module for your system following the instructions in
  /usr/share/doc/openafs-client/README.modules.gz, and then either stop
  and restart openafs-client or reboot the system to reload the kernel
  module.

 -- Russ Allbery <rra@debian.org>  Mon, 06 Apr 2009 15:51:14 -0700

openafs (1.4.2-6) unstable; urgency=medium

  As of this release of the OpenAFS kernel module, all cells, including
  the local cell, have setuid support turned off by default due to the
  possibility of an attacker forging AFS fileserver responses to create a
  fake setuid binary.  Prior releases enabled setuid support for the local
  cell.  Those binaries will now run with normal permissions by default.

  This security fix will only take effect once you've installed a kernel
  module from openafs-modules-source 1.4.2-6 or later.  Doing so is highly
  recommended.  In the meantime, you can disable setuid support by
  running:

      fs setcell -cell <localcell> -nosuid

  as root (where <localcell> is your local cell, the one listed in
  /etc/openafs/ThisCell).

  If you are certain there is no security risk of an attacker forging AFS
  fileserver responses, you can enable setuid status selectively using the
  fs setcell command.

 -- Russ Allbery <rra@debian.org>  Sun, 11 Mar 2007 22:28:07 -0700

