# General documentation

## Overview

The `mgmt` tool is a next generation config management prototype. It's not yet
ready for production, but we hope to get there soon. Get involved today!

## Project Description

The mgmt tool is a distributed, event driven, config management tool, that
supports parallel execution, and librarification to be used as the management
foundation in and for, new and existing software.

For more information, you may like to read some blog posts from the author:

* [Next generation config mgmt](https://purpleidea.com/blog/2016/01/18/next-generation-configuration-mgmt/)
* [Automatic edges in mgmt](https://purpleidea.com/blog/2016/03/14/automatic-edges-in-mgmt/)
* [Automatic grouping in mgmt](https://purpleidea.com/blog/2016/03/30/automatic-grouping-in-mgmt/)
* [Automatic clustering in mgmt](https://purpleidea.com/blog/2016/06/20/automatic-clustering-in-mgmt/)
* [Remote execution in mgmt](https://purpleidea.com/blog/2016/10/07/remote-execution-in-mgmt/)
* [Send/Recv in mgmt](https://purpleidea.com/blog/2016/12/07/sendrecv-in-mgmt/)
* [Metaparameters in mgmt](https://purpleidea.com/blog/2017/03/01/metaparameters-in-mgmt/)

There is also an [introductory video](https://www.youtube.com/watch?v=LkEtBVLfygE&html5=1)
available. Older videos and other material [is available](on-the-web.md).

## Setup

You'll probably want to read the [quick start guide](quick-start-guide.md) to
get going.

## Features

This section details the numerous features of mgmt and some caveats you might
need to be aware of.

### Autoedges

Automatic edges, or AutoEdges, is the mechanism in mgmt by which it will
automatically create dependencies for you between resources. For example,
since mgmt can discover which files are installed by a package it will
automatically ensure that any file resource you declare that matches a
file installed by your package resource will only be processed after the
package is installed.

#### Controlling autoedges

Though autoedges is likely to be very helpful and avoid you having to declare
all dependencies explicitly, there are cases where this behaviour is
undesirable.

Some distributions allow package installations to automatically start the
service they ship. This can be problematic in the case of packages like MySQL
as there are configuration options that need to be set before MySQL is ever
started for the first time (or you'll need to wipe the data directory). In
order to handle this situation you can disable autoedges per resource and
explicitly declare that you want `my.cnf` to be written to disk before the
installation of the `mysql-server` package.

You can disable autoedges for a resource by setting the `autoedge` key on
the meta attributes of that resource to `false`.

#### Blog post

You can read the introductory blog post about this topic here:
[https://purpleidea.com/blog/2016/03/14/automatic-edges-in-mgmt/](https://purpleidea.com/blog/2016/03/14/automatic-edges-in-mgmt/)

### Autogrouping

Automatic grouping or AutoGroup is the mechanism in mgmt by which it will
automatically group multiple resource vertices into a single one. This is
particularly useful for grouping multiple package resources into a single
resource, since the multiple installations can happen together in a single
transaction, which saves a lot of time because package resources typically have
a large fixed cost to running (downloading and verifying the package repo) and
if they are grouped they share this fixed cost. This grouping feature can be
used for other use cases too.

You can disable autogrouping for a resource by setting the `autogroup` key on
the meta attributes of that resource to `false`.

#### Blog post

You can read the introductory blog post about this topic here:
[https://purpleidea.com/blog/2016/03/30/automatic-grouping-in-mgmt/](https://purpleidea.com/blog/2016/03/30/automatic-grouping-in-mgmt/)

### Automatic clustering

Automatic clustering is a feature by which mgmt automatically builds, scales,
and manages the embedded etcd cluster which is compiled into mgmt itself. It is
quite helpful for rapidly bootstrapping clusters and avoiding the extra work to
setup etcd.

If you prefer to avoid this feature. you can always opt to use an existing etcd
cluster that is managed separately from mgmt by pointing your mgmt agents at it
with the `--seeds` variable.

#### Blog post

You can read the introductory blog post about this topic here:
[https://purpleidea.com/blog/2016/06/20/automatic-clustering-in-mgmt/](https://purpleidea.com/blog/2016/06/20/automatic-clustering-in-mgmt/)

### Remote ("agent-less") mode

Remote mode is a special mode that lets you kick off mgmt runs on one or more
remote machines which are only accessible via SSH. In this mode the initiating
host connects over SSH, copies over the `mgmt` binary, opens an SSH tunnel, and
runs the remote program while simultaneously passing the etcd traffic back
through the tunnel so that the initiators etcd cluster can be used to exchange
resource data.

The interesting benefit of this architecture is that multiple hosts which can't
connect directly use the initiator to pass the important traffic through to each
other. Once the cluster has converged all the remote programs can shutdown
leaving no residual agent.

This mode can also be useful for bootstrapping a new host where you'd like to
have the service run continuously and as part of an mgmt cluster normally.

In particular, when combined with the `--converged-timeout` parameter, the
entire set of running mgmt agents will need to all simultaneously converge for
the group to exit. This is particularly useful for bootstrapping new clusters
which need to exchange information that is only available at run time.

This existed in earlier versions of mgmt as a `--remote` option, but it has been
removed and is being ported to a more powerful variant where you can remote
execute via a `remote` resource.

#### Blog post

You can read the introductory blog post about this topic here:
[https://purpleidea.com/blog/2016/10/07/remote-execution-in-mgmt/](https://purpleidea.com/blog/2016/10/07/remote-execution-in-mgmt/)

### Puppet support

You can supply a puppet manifest instead of creating the (YAML) graph manually.
Puppet must be installed and in `mgmt`'s search path. You also need the
[ffrank-mgmtgraph puppet module](https://forge.puppet.com/ffrank/mgmtgraph).

Invoke `mgmt` with the `--puppet` switch, which supports 3 variants:

1. Request the configuration from the puppet server (like `puppet agent` does)

	`mgmt run puppet --puppet agent`

2. Compile a local manifest file (like `puppet apply`)

	`mgmt run puppet --puppet /path/to/my/manifest.pp`

3. Compile an ad hoc manifest from the commandline (like `puppet apply -e`)

	`mgmt run puppet --puppet 'file { "/etc/ntp.conf": ensure => file }'`

For more details and caveats see [puppet-guide.md](puppet-guide.md).

#### Blog post

An introductory post on the puppet support is on
[Felix's blog](http://ffrank.github.io/features/2016/06/19/puppet-powered-mgmt/).

## Reference

Please note that there are a number of undocumented options. For more
information on these options, please view the source at:
[https://github.com/purpleidea/mgmt/](https://github.com/purpleidea/mgmt/).
If you feel that a well used option needs documenting here, please patch it!

### Overview of reference

* [Meta parameters](#meta-parameters): List of available resource meta parameters.
* [Lang metadata file](#lang-metadata-file): Lang metadata file format.
* [Graph definition file](#graph-definition-file): Main graph definition file.
* [Command line](#command-line): Command line parameters.
* [Compilation options](#compilation-options): Compilation options.

### Meta parameters

These meta parameters are special parameters (or properties) which can apply to
any resource. The usefulness of doing so will depend on the particular meta
parameter and resource combination.

#### AutoEdge

Boolean. Should we generate auto edges for this resource?

#### AutoGroup

Boolean. Should we attempt to automatically group this resource with others?

#### Noop

Boolean. Should the Apply portion of the CheckApply method of the resource
make any changes? Noop is a concatenation of no-operation.

#### Retry

Integer. The number of times to retry running the resource on error. Use -1 for
infinite. This currently applies for both the Watch operation (which can fail)
and for the CheckApply operation. While they could have separate values, I've
decided to use the same ones for both until there's a proper reason to want to
do something differently for the Watch errors.

#### Delay

Integer. Number of milliseconds to wait between retries. The same value is
shared between the Watch and CheckApply retries. This currently applies for both
the Watch operation (which can fail) and for the CheckApply operation. While
they could have separate values, I've decided to use the same ones for both
until there's a proper reason to want to do something differently for the Watch
errors.

#### Poll

Integer. Number of seconds to wait between `CheckApply` checks. If this is
greater than zero, then the standard event based `Watch` mechanism for this
resource is replaced with a simple polling mechanism. In general, this is not
recommended, unless you have a very good reason for doing so.

Please keep in mind that if you have a resource which changes every `I` seconds,
and you poll it every `J` seconds, and you've asked for a converged timeout of
`K` seconds, and `I <= J <= K`, then your graph will likely never converge.

When polling, the system detects that a resource is not converged if its
`CheckApply` method returns false. This allows a resource which changes every
`I` seconds, and which is polled every `J` seconds, and with a converged timeout
of `K` seconds to still converge when `J <= K`, as long as `I > J || I > K`,
which is another way of saying that if the resource finally settles down to give
the graph enough time, it can probably converge.

#### Limit

Float. Maximum rate of `CheckApply` runs started per second. Useful to limit
an especially _eventful_ process from causing excessive checks to run. This
defaults to `+Infinity` which adds no limiting. If you change this value, you
will also need to change the `Burst` value to a non-zero value. Please see the
[rate](https://godoc.org/golang.org/x/time/rate) package for more information.

#### Burst

Integer. Burst is the maximum number of runs which can happen without invoking
the rate limiter as designated by the `Limit` value. If the `Limit` is not set
to `+Infinity`, this must be a non-zero value. Please see the
[rate](https://godoc.org/golang.org/x/time/rate) package for more information.

#### Sema

List of string ids. Sema is a P/V style counting semaphore which can be used to
limit parallelism during the CheckApply phase of resource execution. Each
resource can have `N` different semaphores which share a graph global namespace.
Each semaphore has a maximum count associated with it. The default value of the
size is 1 (one) if size is unspecified. Each string id is the unique id of the
semaphore. If the id contains a trailing colon (:) followed by a positive
integer, then that value is the max size for that semaphore. Valid semaphore
id's include: `some_id`, `hello:42`, `not:smart:4` and `:13`. It is expected
that the last bare example be only used by the engine to add a global semaphore.

#### Rewatch

Boolean. Rewatch specifies whether we re-run the Watch worker during a graph
swap if it has errored. When doing a graph compare to swap the graphs, if this
is true, and this particular worker has errored, then we'll remove it and add it
back as a new vertex, thus causing it to run again. This is different from the
`Retry` metaparam which applies during the normal execution. It is only when
this is exhausted that we're in permanent worker failure, and only then can we
rely on this metaparam.

#### Realize

Boolean. Realize ensures that the resource is guaranteed to converge at least
once before a potential graph swap removes or changes it. This guarantee is
useful for fast changing graphs, to ensure that the brief creation of a resource
is seen. This guarantee does not prevent against the engine quitting normally,
and it can't guarantee it if the resource is blocked because of a failed
pre-requisite resource.
*XXX: This is currently not implemented!*

#### Dollar

Boolean. Dollar allows you to have a resource name that starts with a `$` sign.
This is false by default. This helps you catch cases when you write code like:

```mcl
$foo = "/tmp/file1"
file "$foo" {} # incorrect!
```

The above code would ignore the `$foo` variable and attempt to make a file named
`$foo` which would obviously not work. To correctly interpolate a variable, you
need to surround the name with curly braces.

```mcl
$foo = "/tmp/file1"
file "${foo}" {} # correct!
```

This meta param is a safety measure to make your life easier. It works for all
resources. If someone comes up with a resource which would routinely start with
a dollar sign, then we can revisit the default for this resource kind.

#### Reverse

Boolean. Reverse is a property that some resources can implement that specifies
that some "reverse" operation should happen when that resource "disappears". A
disappearance happens when a resource is defined in one instance of the graph,
and is gone in the subsequent one. This disappearance can happen if it was
previously in an if statement that then becomes false.

This is helpful for building robust programs with the engine. The engine adds a
"reversed" resource to that subsequent graph to accomplish the desired "reverse"
mechanics. The specifics of what this entails is a property of the particular
resource that is being "reversed".

It might be wise to combine the use of this meta parameter with the use of the
`realize` meta parameter to ensure that your reversed resource actually runs at
least once, if there's a chance that it might be gone for a while.

### Lang metadata file

Any module *must* have a metadata file in its root. It must be named
`metadata.yaml`, even if it's empty. You can specify zero or more values in yaml
format which can change how your module behaves, and where the `mcl` language
looks for code and other files. The most important top level keys are: `main`,
`path`, `files`, and `license`.

#### Main

The `main` key points to the default entry point of your code. It must be a
relative path if specified. If it's empty it defaults to `main.mcl`. It should
generally not be changed. It is sometimes set to `main/main.mcl` if you'd like
your modules code out of the root and into a child directory for cases where you
don't plan on having a lot deeper imports relative to `main.mcl` and all those
files would clutter things up.

#### Path

The `path` key specifies the modules import search directory to use for this
module. You can specify this if you'd like to vendor something for your module.
In general, if you use it, please use the convention: `path/`. If it's not
specified, you will default to the parent modules directory.

#### Files

The `files` key specifies some additional files that will get included in your
deploy. It defaults to `files/`.

#### License

The `license` key allows you to specify a license for the module. Please specify
one so that everyone can enjoy your code! Use a "short license identifier", like
`LGPLv3+`, or `MIT`. The former is a safe choice if you're not sure what to use.

### Graph definition file

graph.yaml is the compiled graph definition file. The format is currently
undocumented, but by looking through the [examples/](https://github.com/purpleidea/mgmt/tree/master/examples/yaml/)
you can probably figure out most of it, as it's fairly intuitive. It's not
recommended that you use this, since it's preferable to write code in the
[mcl language](language-guide.md) front-end.

### Command line

The main interface to the `mgmt` tool is the command line. For the most recent
documentation, please run `mgmt --help`.

#### `--converged-timeout <seconds>`

Exit if the machine has converged for approximately this many seconds.

#### `--max-runtime <seconds>`

Exit when the agent has run for approximately this many seconds. This is not
generally recommended, but may be useful for users who know what they're doing.

#### `--noop`

Globally force all resources into no-op mode. This also disables the export to
etcd functionality, but does not disable resource collection, however all
resources that are collected will have their individual noop settings set.

#### `--sema <size>`

Globally add a counting semaphore of this size to each resource in the graph.
The semaphore will get given an id of `:size`. In other words if you specify a
size of 42, you can expect a semaphore if named: `:42`. It is expected that
consumers of the semaphore metaparameter always include a prefix to avoid a
collision with this globally defined semaphore. The size value must be greater
than zero at this time. The traditional non-parallel execution found in config
management tools such as `puppet` can be obtained with `--sema 1`.

#### `--ssh-priv-id-rsa`

Specify the path for finding SSH keys. This defaults to `~/.ssh/id_rsa`. To
never use this method of authentication, set this to the empty string.

#### `--prefix <path>`

Specify a path to a custom working directory prefix. This directory will get
created if it does not exist. This usually defaults to `/var/lib/mgmt/`. This
can't be combined with the `--tmp-prefix` option. It can be combined with the
`--allow-tmp-prefix` option.

#### `--tmp-prefix`

If this option is specified, a temporary prefix will be used instead of the
default prefix. This can't be combined with the `--prefix` option.

#### `--allow-tmp-prefix`

If this option is specified, we will attempt to fall back to a temporary prefix
if the primary prefix couldn't be created. This is useful for avoiding failures
in environments where the primary prefix may or may not be available, but you'd
like to try. The canonical example is when running `mgmt` with remote execution
there might be a cached copy of the binary in the primary prefix, but if there's
no binary available continue working in a temporary directory to avoid failure.

### Compilation options

You can control some compilation variables by using environment variables.

#### Disable libvirt support

If you wish to compile mgmt without libvirt, you can use the following command:

```
GOTAGS=novirt make build
```

#### Disable augeas support

If you wish to compile mgmt without augeas support, you can use the following
command:

```
GOTAGS=noaugeas make build
```

#### Disable docker support

If you wish to compile mgmt without docker support, you can use the following
command:

```
GOTAGS=nodocker make build
```

#### Combining compile-time flags

You can combine multiple tags by using a space-separated list:

```
GOTAGS="noaugeas novirt nodocker" make build
```

## Examples

For example configurations, please consult the [examples/](https://github.com/purpleidea/mgmt/tree/master/examples)
directory in the git source repository. It is available from:

[https://github.com/purpleidea/mgmt/tree/master/examples](https://github.com/purpleidea/mgmt/tree/master/examples)

### Systemd:

See [`misc/mgmt.service`](../misc/mgmt.service) for a sample systemd unit file.
This unit file is part of the RPM.

To specify your custom options for `mgmt` on a systemd distro:

```bash
sudo mkdir -p /etc/systemd/system/mgmt.service.d/

cat > /etc/systemd/system/mgmt.service.d/env.conf <<EOF
# Environment variables:
MGMT_SEEDS=http://127.0.0.1:2379
MGMT_CONVERGED_TIMEOUT=-1
MGMT_MAX_RUNTIME=0

# Other CLI options if necessary.
#OPTS="--max-runtime=0"
EOF

sudo systemctl daemon-reload
```

## Development

This is a project that I started in my free time in 2013. Development is driven
by all of our collective patches! Dive right in, and start hacking!
Please contact me if you'd like to invite me to speak about this at your event.

You can follow along [on my technical blog](https://purpleidea.com/blog/).

To report any bugs, please file a ticket at: [https://github.com/purpleidea/mgmt/issues](https://github.com/purpleidea/mgmt/issues).

## Authors

Copyright (C) 2013-2024+ James Shubin and the project contributors

Please see the
[AUTHORS](https://github.com/purpleidea/mgmt/tree/master/AUTHORS) file
for more information.

* [github](https://github.com/purpleidea/)
* [@purpleidea](https://twitter.com/#!/purpleidea)
* [https://purpleidea.com/](https://purpleidea.com/)
