This is ranlip.info, produced by makeinfo version 4.5 from
ranlip.texinfo.

   =insert 		    GNU GENERAL PUBLIC LICENSE 		       Version 2,
June 1991

   Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple
Place, Suite 330, Boston, MA  02111-1307  USA. Everyone is permitted to
copy and distribute verbatim copies of this license document, but
changing it is not allowed.



File: ranlip.info,  Node: Top,  Next: Introduction,  Up: (dir)

Class Library ranlip for Multivariate Non-uniform Random Variate Generation
***************************************************************************

   This manual describes generation of non-uniform random variates from
Lipschitz-continuous densities using acceptance/ rejection, and the
class library *ranlip* which implements this method. It is assumed that
the required distribution has Lipschitz-continuous density, which is
either given analytically or as a black box. The algorithm builds a
piecewise constant upper approximation to the density (the hat
function), using a large number of its values and subdivision of the
domain into hyper rectangles.

   The class library *ranlip* provides very competitive preprocessing
and generation times, and yields  small rejection constant, which is a
measure of efficiency of the generation step. It exhibits good
performance for up to five variables, and provides the user with a
black box non-uniform random variate generator for a large class of
distributions, in particular, multimodal distributions.

		    GNU GENERAL PUBLIC LICENSE 		       Version 2,
June 1991

   Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple
Place, Suite 330, Boston, MA  02111-1307  USA. Everyone is permitted to
copy and distribute verbatim copies of this license document, but
changing it is not allowed.
   The menu below lists the major sections which give a brief
background, overview of the library and illustrative examples on how to
use it.

* Menu:

* Introduction::     				Overview of software.
* Description of Library:: 			Library interface methods.
* Examples::					Library in action.
* Performance::					Computational complexity and performance of the algorithms.
* Index::            				Complete index.


File: ranlip.info,  Node: Introduction,  Next: Description of Library,  Prev: Top,  Up: Top

Introduction
************

   This manual describes the programming library *ranlip*, which
implements the method of acceptance/ rejection in the multivariate
case, for Lipschitz continuous  densities. It assumes that the
Lipschitz constant of the density rho is known, or can be approximated,
and that computation of the values of rho at distinct points is not
expensive. The method builds a piecewise constant hat function, by
subdividing the domain into hyper rectangles, and by using a large
number of values of rho. Lipschitz properties of rhoallow one to
overestimate rho at all other points, and thus to overestimate the
absolute maxima of rho on the elements of the partition.

   The class library *ranlip* implements computation of the hat
function and generation of random variates, and makes this process
transparent to the user. The user needs to provide a method of
evaluation of rho at a given point, and the number of elements in the
subdivision of the domain, which is the  parameter characterizing the
quality of the hat function and the number of computations at the
preprocessing step.

   The class of Lipschitz-continuous densities is very broad, and
includes many multimodal densities, which are hard to deal with. No
other properties beyond Lipschitz continuity are required, and the
Lipschitz constant, if not provided, can be estimated automatically.
The algorithm does not require rho to be given analytically, to be
differentiable, or to be normalized.


File: ranlip.info,  Node: Description of Library,  Next: Examples,  Prev: Introduction,  Up: Top

Description of Library
**********************

   The main class which provides the interface to the preprocessing and
computation is called `CRanLip'. It is illustrated in the following
sections, together with amore extensive description of the interface.
Can be viewed via the following menu:

* Menu:

* Class CRanLip::		interface of class CRanLip, inheriting from CRanLip
* Closer Look at Interface::	more detailed view of the interface.


File: ranlip.info,  Node: Class CRanLip,  Next: Closer Look at Interface,  Up: Description of Library

Class CRanLip
=============

   The main class which provides the interface to the preprocessing and
random variate generation is called CRanLip. This is an abstract class,
from which the user must derive his own class which overrides the
method for rho(x), and declare an instance of that class. The interface
of Class CRandLip is illustrated bellow followed by an example of how
to inherit from CRanLip.

     class CRanLip  {
     public:
     // initialises the tables and arrays for the generator
     // should be the first method to call
         void Init(int dim, double* left, double* right);
     
     // sets the pointer to the uniform random number generator.
     // The default is ranlux generator
         void SetUniformGenerator(UFunction gen);
     
     // sets the seed for the uniform random number generator
         void Seed(int seed);
     
     // computes the hat function given the Lipschitz constant
     // num and numfine determine the rough and fine partitions
         void PrepareHatFunction(int num, int numfine, double Lip);
     
     // computes the hat function, and automatically computes
     // the Lipschitz constant
         void PrepareHatFunctionAuto(int num, int numfine, double minLip);
     
     // generates a random variate with the required density
         void RandomVec(double* p);
     
     // frees the memory occupied by the partition and various tables
          void FreeMem();
     ...
     }

   The example bellow illustrates how the user needs to inherit from
CRanLip.

     // declare a derived class MyRnumGen, with one method to override
     class MyRnumGen:public CRanLip {
     	 public: virtual double	Distribution(double* p) ;
     };
     
     double	MyRnumGen::Distribution(double* p)
     { // example: multivriate normal distribution
        double r;
        for(int j=0;j<Dimension;j++) {
           r+=p[j]*p[j];
        }
        return exp(-r);;
     }
     // declare an instance of this class
     MyRnumGen MyGen;


File: ranlip.info,  Node: Closer Look at Interface,  Prev: Class CRanLip,  Up: Description of Library

Closer Look at Interface
========================

Init(int dim, double* left, double* right)
------------------------------------------

   Initialises the internal variables of this class. dim is the
dimension, left and right are arrays of size dim which determine the
domain of rho: left_i <= x_i <= right_i. *Init must be called only once
before any other method.*

SetUniformGenerator(UFunction gen)
----------------------------------

   Sets a pointer to the uniform random number generator on (0,1). The
default is M. Luescher's ranlux generator, but the user can override it
and use his own preferred generator.

Seed(int seed)
--------------

   Sets the seed of the default uniform random number generator ranlux.
If the user has supplied his own generator in SetUniformGenerator, that
generator's seed() function should be called instead.

PrepareHatFunction(int num, int numfine, double Lip)
----------------------------------------------------

   Builds the hat function, using the Lipschitz constant supplied in
Lip. Parameters num and numfine determine the rough and fine
partitions. num is the number of subdivisions in each variable to
partition the domain D into hyper rectangles D_k. On each D_k, the hat
function will have a constant value h_k. numfine(>1) is the number of
subdivisions in the finer partition in each variable. Each set D_k is
subdivided into (numfine-1)^dim smaller hyper rectangles, in order to
improve the quality of the overestimate h_k. There will be in total
(num*numfine)^dim evaluations of rho (calls to Distribution()). numfine
should be a power of 2 for numerical efficiency reasons (if not, it
will be automatically changed to a power of 2 larger than the supplied
value). numfine can be 2, in which case the fine partition is not used.

PrepareHatFunctionAuto(int num, int numfine, double minLip=0)
-------------------------------------------------------------

   Builds the hat function and automatically computes an estimate to
the Lipschitz constant.  Parameters num and numfine determine the rough
and fine partitions, and are described in PrepareHatFunction() method.
minLip denotes the lower bound on the value of the computed Lipschitz
constant, the default value is 0.

RandomVec(double* p)
--------------------

   Generates a random variate with the density rho. Should be called
after PrepareHatFunction() or PrepareHatFunctionAuto(). The parameter p
is an array of size dim, it will contain the components of the computed
random vector.

FreeMemory()
------------

   Frees the memory occupied by the data structures, which can be very
large. It destroys the hat function, and RandomVec() method cannot be
called after FreeMemory(). Automatically called from the destructor.
This method is useful to deallocate memory while the object CRanLip
still exists.


File: ranlip.info,  Node: Examples,  Next: Performance,  Prev: Description of Library,  Up: Top

Exemples
********

   There are several examples of the usage of *ranlip* provided in the
distribution. There are three basic steps: to supply the required
distribution, to build the hat function, and to generate random
variates. As illustrated in following examples.

* Menu:

* Common Use Example::	Common usage.
* Another Example::	Common usage.
* Procedural Example::	Uses C syntax.


File: ranlip.info,  Node: Common Use Example,  Next: Another Example,  Up: Examples

Common Use Example
==================

     #include "ranlip.h"
     #define dim 4             // the dimension
     // declare a derived class MyRnumGen, with one method to override
     class MyRnumGen:public CRanLip {
     	 public: virtual double	Distribution(double* p) ;
     };
     double	MyRnumGen::Distribution(double* p)
     { // example: multivriate normal distribution
        double r=0.0;
        for(int j=0;j<Dimension;j++)  r+=p[j]*p[j];
        return exp(-r);
     }
     void main(int argc, char *argv[]){
        double LipConst = 4.0;
        MyRnumGen MyGen;
        double left[dim], right[dim], p[dim];
        int i;
     // set the domain to be the unit hypercube
        for(i=0;i<dim;i++) {left[i]=0; right[i]=1;}
     
        MyGen.Init(dim,left,right);
        MyGen.PrepareHatFunction(10,8,LipConst);
        MyGen.Seed(10);
        for(i=0;i<1000;i++) {
           MyGen.RandomVec(p);
        // do something with p
        }
        MyGen.FreeMemory();
     // now MyGen can be reused
        MyGen.Init(dim,left,right);
        MyGen.PrepareHatFunctionAuto(10,32);
        for(i=0;i<1000;i++) {
           MyGen.RandomVec(p);
        }
     }


File: ranlip.info,  Node: Another Example,  Next: Procedural Example,  Prev: Common Use Example,  Up: Examples

Another Example
===============

     // Example 2
     #include "ranlip.h"
     #define dim 3             // the dimension
     // declare a derived class MyRnumGen, with one method to override
     class MyRnumGen:public CRanLip {
     	 public: virtual double	Distribution(double* p) ;
     };
     double	MyRnumGen::Distribution(double* p)
     { // example: multivriate normal distribution
        double r=0.0;
        for(int j=0;j<Dimension;j++)  r+=p[j]*p[j];
        return exp(-r);
     }
     void main(int argc, char *argv[]){
        double LipConst;
        MyRnumGen MyGen;
        double left[dim], right[dim], p[dim];
        int i;
     // set the domain to be a hypercube
        for(i=0;i<dim;i++) {left[i]=-2; right[i]=2;}
        MyGen.Init(dim,left,right);
        MyGen.PrepareHatFunctionAuto(10,32,0.01);
        MyGen.Seed(10);
     
        for(i=0;i<1000;i++) {
           MyGen.RandomVec(p);
        // do something with p
        }
        cout<<"acceptance ratio is "<<1000.0/ MyGen.count_total<<endl;
        LipConst=MyGen.Lipschitz; // computed Lipschitz constant
        if(MyGen.count_error>0) { // Lipschitz constant was too low
           LipConst*=2;
           MyGen.PrepareHatFunction(10,32,LipConst);
        }
        for(i=0;i<1000;i++) {
           MyGen.RandomVec(p);
        // do something with p
        }
     }


File: ranlip.info,  Node: Procedural Example,  Prev: Another Example,  Up: Examples

Procedural Example
==================

     // Example 3  using procedural interface
     #include "ranlipproc.h"
     #define Dim 3             // the dimension
     // implement calculation of the density in MyDist function
     double MyDist(double* p, int dim)
     { // example: multivariate normal distribution
        double r=0.0;
        for(int j=0;j<dim;j++)  r+=p[j]*p[j];
        return exp(-r);
     }
     double MyRand() // use my own random number generator
     { return  (double)rand()/(RAND_MAX+0.001); } //random numbers in [0,1)
     
     void main(int argc, char *argv[]){
        double LipConst; int i;
        double left[Dim], right[Dim], p[Dim];
     // set the domain to be a hypercube
        for(i=0;i<Dim;i++) {left[i]=-2; right[i]=2;}
     
        InitRanLip(Dim,a,b);
     // pass the address of the density function (required)
        SetDistFunctionRanLip(&MyDist);
     // pass the address of my generator (optional)
        SetUniformGeneratorRanLip(&MyRand);
        srand(10); // use srand, not SeedRanLip
     
        PrepareHatFunctionAutoRanLip(10,8);
        for(i=0;i<1000;i++) {
           RandomVecRanLip(p);
        // do something with p
        }
        cout<<"acceptance ratio is "<<1000.0/ Count_totalRanLip() <<endl;
        LipConst=LipschitzRanLip(); // computed Lipschitz constant
        if(Count_errorRanLip()>0) { // Lipschitz constant was too low
           LipConst*=2;
           PrepareHatFunctionRanLip(10,32,LipConst);
        }
        for(i=0;i<1000;i++)
           RandomVecRanLip(p);
     }


File: ranlip.info,  Node: Performance,  Next: Index,  Prev: Examples,  Up: Top

Performance
***********

   It is important to estimate the computing time and memory
requirements when using *ranlip*, especially for the case of several
variables. The quality of the hat function directly depends on the
number of values of rho(x) used for its computation. The higher this
number is, the longer is preprocessing step (building the hat
function), but the more efficient is the generation step (less rejected
variates). A good estimate of the Lipschitz constant is also important,
as it improves  the quality of the hat function.

   The method PrepareHatFunction(num, numfine, LipConst) uses the first
two parameters to establish the rough partition of the domain, sets
D_k, on which  the hat function will have a constant value h_k, and the
fine partition, used to compute this value. In total, (num*numfine)^dim
evaluations of rho will be performed. The memory required by the
algorihm is numfine^dim + 2*num^dim values of type double (8 bytes
each).

   For numerical efficiency, the second parameter numfine should be a
power of 2. This facilitates computation of the neighbours  in an
n-dimensional mesh by using binary arithmetic.


File: ranlip.info,  Node: Index,  Prev: Performance,  Up: Top

Index
*****

* Menu:

* chapter, Computational complexity and performance: Performance.
* chapter, exemples:                     Examples.
* chapter, Introduction:                 Introduction.
* chapter, ranlip Description:           Description of Library.
* Examples, Another Example:             Another Example.
* Examples, Common Use Example:          Common Use Example.
* Examples, Procedural Example:          Procedural Example.
* section, interface of class CRanLip:   Class CRanLip.
* section, RanLip library Interface:     Closer Look at Interface.



Tag Table:
Node: Top388
Node: Introduction2228
Node: Description of Library3805
Node: Class CRanLip4348
Node: Closer Look at Interface6457
Node: Examples9384
Node: Common Use Example9871
Node: Another Example11140
Node: Procedural Example12618
Node: Performance14270
Node: Index15507

End Tag Table
