Net::Jabber::Protocol(3pm)

NAME
Net::Jabber::Protocol - Jabber Protocol Library

SYNOPSIS
  Net::Jabber::Protocol is a module that provides a developer easy
  access to the Jabber Instant Messaging protocol.  It provides high
  level functions to the Net::Jabber Client, Component, and Server
  objects.  These functions are automatically indluded in those modules
  through AUTOLOAD and delegates.

DESCRIPTION
  Protocol.pm seeks to provide enough high level APIs and automation of
  the low level APIs that writing a Jabber Client/Transport in Perl is
  trivial.  For those that wish to work with the low level you can do
  that too, but those functions are covered in the documentation for
  each module.

  Net::Jabber::Protocol provides functions to login, send and receive
  messages, set personal information, create a new user account, manage
  the roster, and disconnect.  You can use all or none of the functions,
  there is no requirement.

  For more information on how the details for how Net::Jabber is written
  please see the help for Net::Jabber itself.

  For more information on writing a Client see Net::Jabber::Client.

  For more information on writing a Transport see Net::Jabber::Transport.

  Modes
  Several of the functions take a mode argument that let you specify how
  the function should behave:

    block - send the packet with an ID, and then block until an answer
            comes back.  You can optionally specify a timeout so that
            you do not block forever.

    nonblock - send the packet with an ID, but then return that id and
               control to the master program.  Net::Jabber is still
               tracking this packet, so you must use the CheckID function
               to tell when it comes in.  (This might not be very
               useful...)

    passthru - send the packet with an ID, but do NOT register it with
               Net::Jabber, then return the ID.  This is useful when
               combined with the XPath function because you can register
               a one shot function tied to the id you get back.

  Basic Functions
    use Net::Jabber qw( Client );
    $Con = new Net::Jabber::Client();                # From
    $status = $Con->Connect(hostname=>"jabber.org"); # Net::Jabber::Client

      or

    use Net::Jabber qw( Component );
    $Con = new Net::Jabber::Component();             #
    $status = $Con->Connect(hostname=>"jabber.org",  # From
                            secret=>"bob");          # Net::Jabber::Component

    #
    # For callback setup, see Net::XMPP::Protocol
    #

    $Con->Info(name=>"Jarl",
               version=>"v0.6000");

  ID Functions
    $id         = $Con->SendWithID($sendObj);
    $id         = $Con->SendWithID("<tag>XML</tag>");
    $receiveObj = $Con->SendAndReceiveWithID($sendObj);
    $receiveObj = $Con->SendAndReceiveWithID($sendObj,
                                             10);
    $receiveObj = $Con->SendAndReceiveWithID("<tag>XML</tag>");
    $receiveObj = $Con->SendAndReceiveWithID("<tag>XML</tag>",
                                             5);
    $yesno      = $Con->ReceivedID($id);
    $receiveObj = $Con->GetID($id);
    $receiveObj = $Con->WaitForID($id);
    $receiveObj = $Con->WaitForID($id,
                                  20);

  IQ Functions

  Agents Functions
    %agents = $Con->AgentsGet();
    %agents = $Con->AgentsGet(to=>"transport.jabber.org");

  Browse Functions
    %hash = $Con->BrowseRequest(jid=>"jabber.org");
    %hash = $Con->BrowseRequest(jid=>"jabber.org",
                                timeout=>10);

    $id = $Con->BrowseRequest(jid=>"jabber.org",
                              mode=>"nonblock");

    $id = $Con->BrowseRequest(jid=>"jabber.org",
                              mode=>"passthru");

  Browse DB Functions
    $Con->BrowseDBDelete("jabber.org");
    $Con->BrowseDBDelete(Net::Jabber::JID);

    $presence  = $Con->BrowseDBQuery(jid=>"bob\@jabber.org");
    $presence  = $Con->BrowseDBQuery(jid=>Net::Jabber::JID);
    $presence  = $Con->BrowseDBQuery(jid=>"users.jabber.org",
                                     timeout=>10);
    $presence  = $Con->BrowseDBQuery(jid=>"conference.jabber.org",
                                     refresh=>1);

  Bystreams Functions
    %hash = $Con->ByteStreamsProxyRequest(jid=>"proxy.server");
    %hash = $Con->ByteStreamsProxyRequest(jid=>"proxy.server",
                                          timeout=>10);

    $id = $Con->ByteStreamsProxyRequest(jid=>"proxy.server",
                                        mode=>"nonblock");

    $id = $Con->ByteStreamsProxyRequest(jid=>"proxy.server",
                                        mode=>"passthru");

    %hash = $Con->ByteStreamsProxyParse($query);

    $status = $Con->ByteStreamsProxyActivate(sid=>"stream_id",
                                             jid=>"proxy.server");
    $status = $Con->ByteStreamsProxyActivate(sid=>"stream_id",
                                             jid=>"proxy.server",
                                            timeout=>10);

    $id = $Con->ByteStreamsProxyActivate(sid=>"stream_id",
                                         jid=>"proxy.server",
                                        mode=>"nonblock");

    $id = $Con->ByteStreamsProxyActivate(sid=>"stream_id",
                                         jid=>"proxy.server",
                                        mode=>"passthru");

    $jid = $Con->ByteStreamsOffer(sid=>"stream_id",
                                  streamhosts=>[{jid=>"jid",
                                                 host=>"host",
                                                 port=>"port",
                                                 zeroconf=>"zero",
                                                },
                                                ...
                                               ],
                                  jid=>"bob\@jabber.org");
    $jid = $Con->ByteStreamsOffer(sid=>"stream_id",
                                  streamhosts=>[{},{},...],
                                  jid=>"bob\@jabber.org",
                                  timeout=>10);

    $id = $Con->ByteStreamsOffer(sid=>"stream_id",
                                 streamhosts=>[{},{},...],
                                 jid=>"bob\@jabber.org",
                                 mode=>"nonblock");

    $id = $Con->ByteStreamsOffer(sid=>"stream_id",
                                 streamhosts=>[{},{},...],
                                 jid=>"bob\@jabber.org",
                                 mode=>"passthru");

  Disco Functions
    %hash = $Con->DiscoInfoRequest(jid=>"jabber.org");
    %hash = $Con->DiscoInfoRequest(jid=>"jabber.org",
                                   node=>"node...");
    %hash = $Con->DiscoInfoRequest(jid=>"jabber.org",
                                   node=>"node...",
                                   timeout=>10);

    $id = $Con->DiscoInfoRequest(jid=>"jabber.org",
                                 mode=>"nonblock");
    $id = $Con->DiscoInfoRequest(jid=>"jabber.org",
                                 node=>"node...",
                                 mode=>"nonblock");

    $id = $Con->DiscoInfoRequest(jid=>"jabber.org",
                                 mode=>"passthru");
    $id = $Con->DiscoInfoRequest(jid=>"jabber.org",
                                 node=>"node...",
                                 mode=>"passthru");

    %hash = $Con->DiscoInfoParse($query);

    %hash = $Con->DiscoItemsRequest(jid=>"jabber.org");
    %hash = $Con->DiscoItemsRequest(jid=>"jabber.org",
                                    timeout=>10);

    $id = $Con->DiscoItemsRequest(jid=>"jabber.org",
                                  mode=>"nonblock");

    $id = $Con->DiscoItemsRequest(jid=>"jabber.org",
                                  mode=>"passthru");

    %hash = $Con->DiscoItemsParse($query);

  Feature Negotiation Functions
    %hash = $Con->FeatureNegRequest(jid=>"jabber.org",
                                    features=>{ feat1=>["opt1","opt2",...],
                                                feat2=>["optA","optB",...]
                                              }
                                   );
    %hash = $Con->FeatureNegRequest(jid=>"jabber.org",
                                    features=>{ ... },
                                    timeout=>10);

    $id = $Con->FeatureNegRequest(jid=>"jabber.org",
                                  features=>{ ... },
                                  mode=>"nonblock");

    $id = $Con->FeatureNegRequest(jid=>"jabber.org",
                                  features=>{ ... },
                                  mode=>"passthru");

    my $query = $self->FeatureNegQuery(\{ ... });
    $iq->AddQuery($query);

    %hash = $Con->FeatureNegParse($query);

  File Transfer Functions
    $method = $Con->FileTransferOffer(jid=>"bob\@jabber.org",
                                      sid=>"stream_id",
                                      filename=>"/path/to/file",
                                      methods=>["http://jabber.org/protocol/si/profile/bytestreams",
                                                "jabber:iq:oob",
                                                ...
                                               ]
                                     );
    $method = $Con->FileTransferOffer(jid=>"bob\@jabber.org",
                                      sid=>"stream_id",
                                      filename=>"/path/to/file",
                                      methods=>\@methods,
                                      timeout=>"10");

    $id = $Con->FileTransferOffer(jid=>"bob\@jabber.org",
                                  sid=>"stream_id",
                                  filename=>"/path/to/file",
                                  methods=>\@methods,
                                  mode=>"nonblock");

    $id = $Con->FileTransferOffer(jid=>"bob\@jabber.org",
                                  sid=>"stream_id",
                                  filename=>"/path/to/file",
                                  methods=>\@methods,
                                  mode=>"passthru");

  Last Functions
    $Con->LastQuery();
    $Con->LastQuery(to=>"bob@jabber.org");

    %result = $Con->LastQuery(mode=>"block");
    %result = $Con->LastQuery(to=>"bob@jabber.org",
                              mode=>"block");

    %result = $Con->LastQuery(to=>"bob@jabber.org",
                              mode=>"block",
                              timeout=>10);
    %result = $Con->LastQuery(mode=>"block",
                              timeout=>10);

    $Con->LastSend(to=>"bob@jabber.org");

    $seconds = $Con->LastActivity();

  Multi-User Chat Functions
    $Con->MUCJoin(room=>"jabber",
                  server=>"conference.jabber.org",
                  nick=>"nick");

    $Con->MUCJoin(room=>"jabber",
                  server=>"conference.jabber.org",
                  nick=>"nick",
                  password=>"secret");

  Register Functions
    @result = $Con->RegisterSendData("users.jabber.org",
                                     first=>"Bob",
                                     last=>"Smith",
                                     nick=>"bob",
                                     email=>"foo@bar.net");

  RPC Functions
    $query = $Con->RPCEncode(type=>"methodCall",
                             methodName=>"methodName",
                             params=>[param,param,...]);
    $query = $Con->RPCEncode(type=>"methodResponse",
                             params=>[param,param,...]);
    $query = $Con->RPCEncode(type=>"methodResponse",
                             faultCode=>4,
                             faultString=>"Too many params");

    @response = $Con->RPCParse($iq);

    @response = $Con->RPCCall(to=>"dataHouse.jabber.org",
                              methodname=>"numUsers",
                              params=>[ param,param,... ]
                             );

    $Con->RPCResponse(to=>"you\@jabber.org",
                      params=>[ param,param,... ]);

    $Con->RPCResponse(to=>"you\@jabber.org",
                      faultCode=>"4",
                      faultString=>"Too many parameters"
                     );

    $Con->RPCSetCallBacks(myMethodA=>\&methoda,
                          myMethodB=>\&do_somthing,
                          etc...
                         );

  Search Functions
    %fields = $Con->SearchRequest();
    %fields = $Con->SearchRequest(to=>"users.jabber.org");
    %fields = $Con->SearchRequest(to=>"users.jabber.org",
                                  timeout=>10);

    $Con->SearchSend(to=>"somewhere",
                     name=>"",
                     first=>"Bob",
                     last=>"",
                     nick=>"bob",
                     email=>"",
                     key=>"some key");

    $Con->SearchSendData("users.jabber.org",
                         first=>"Bob",
                         last=>"",
                         nick=>"bob",
                         email=>"");

  Time Functions
    $Con->TimeQuery();
    $Con->TimeQuery(to=>"bob@jabber.org");

    %result = $Con->TimeQuery(mode=>"block");
    %result = $Con->TimeQuery(to=>"bob@jabber.org",
                              mode=>"block");

    $Con->TimeSend(to=>"bob@jabber.org");

  Version Functions
    $Con->VersionQuery();
    $Con->VersionQuery(to=>"bob@jabber.org");

    %result = $Con->VersionQuery(mode=>"block");
    %result = $Con->VersionQuery(to=>"bob@jabber.org",
                                 mode=>"block");

    $Con->VersionSend(to=>"bob@jabber.org",
                      name=>"Net::Jabber",
                      ver=>"1.0a",
                      os=>"Perl");

METHODS

  Basic Functions
    Info(name=>string,    - Set some information so that Net::Jabber
         version=>string)   can auto-reply to some packets for you to
                            reduce the work you have to do.

                            NOTE: This requires that you use the
                            SetIQCallBacks methodology and not the
                            SetCallBacks for <iq/> packets.

  IQ Functions

  Agents Functions
    ********************************
    *                              *
    * Deprecated in favor of Disco *
    *                              *
    ********************************

    AgentsGet(to=>string, - takes all of the information and
    AgentsGet()             builds a Net::Jabber::IQ::Agents packet.
                            It then sends that packet either to the
                            server, or to the specified transport,
                            with an ID and waits for that ID to return.
                            Then it looks in the resulting packet and
                            builds a hash that contains the values
                            of the agent list.  The hash is layed out
                            like this:  (NOTE: the jid is the key to
                            distinguish the various agents)

                              $hash{<JID>}->{order} = 4
                                          ->{name} = "ICQ Transport"
                                          ->{transport} = "ICQ #"
                                          ->{description} = "ICQ..blah.."
                                          ->{service} = "icq"
                                          ->{register} = 1
                                          ->{search} = 1
                                        etc...

                            The order field determines the order that
                            it came from the server in... in case you
                            care.  For more info on the valid fields
                            see the Net::Jabber::Query jabber:iq:agent
                            namespace.

  Browse Functions
    ********************************
    *                              *
    * Deprecated in favor of Disco *
    *                              *
    ********************************

    BrowseRequest(jid=>string, - sends a jabber:iq:browse request to
                  mode=>string,  the jid passed as an argument.
                  timeout=>int)  Returns a hash with the resulting
                                 tree if mode is set to "block":

                $browse{'category'} = "conference"
                $browse{'children'}->[0]
                $browse{'children'}->[1]
                $browse{'children'}->[11]
                $browse{'jid'} = "conference.jabber.org"
                $browse{'name'} = "Jabber.org Conferencing Center"
                $browse{'ns'}->[0]
                $browse{'ns'}->[1]
                $browse{'type'} = "public"

                                 The ns array is an array of the
                                 namespaces that this jid supports.
                                 The children array points to hashs
                                 of this form, and represent the fact
                                 that they can be browsed to.

                                 See MODES above for using the mode
                                 and timeout.

  Browse DB Functions
    BrowseDBDelete(string|Net::Jabber::JID) - delete thes JID browse
                                              data from the DB.

    BrowseDBQuery(jid=>string | NJ::JID, - returns the browse data
                  timeout=>integer,        for the requested JID.  If
                  refresh=>0|1)            the DB does not contain
                                           the data for the JID, then
                                           it attempts to fetch the
                                           data via BrowseRequest().
                                           The timeout is passed to
                                           the BrowseRequest() call,
                                           and refresh tells the DB
                                           to request the data, even
                                           if it already has some.

  Bytestreams Functions
    ByteStreamsProxyRequest(jid=>string, - sends a bytestreams request
                            mode=>string,  to the jid passed as an
                            timeout=>int)  argument.  Returns an array
                                           ref with the resulting tree
                                           if mode is set to "block".

                                           See ByteStreamsProxyParse
                                           for the format of the
                                           resulting tree.

                                           See MODES above for using
                                           the mode and timeout.

    ByteStreamsProxyParse(Net::Jabber::Query) - parses the query and
                                                returns an array ref
                                                to the resulting tree:

                $host[0]->{jid} = "bytestreams1.proxy.server";
                $host[0]->{host} = "proxy1.server";
                $host[0]->{port} = "5006";
                $host[1]->{jid} = "bytestreams2.proxy.server";
                $host[1]->{host} = "proxy2.server";
                $host[1]->{port} = "5007";
                ...

    ByteStreamsProxyActivate(jid=>string, - sends a bytestreams activate
                             sid=>string,   to the jid passed as an
                             mode=>string,  argument.  Returns 1 if the
                             timeout=>int)  proxy activated (undef if
                                            it did not) if mode is set
                                            to "block".

                                            sid is the stream id that
                                            is being used to talk about
                                            this stream.

                                            See MODES above for using
                                            the mode and timeout.

    ByteStreamsOffer(jid=>string,         - sends a bytestreams offer
                     sid=>string,           to the jid passed as an
                     streamhosts=>arrayref  argument.  Returns the jid
                     mode=>string,          of the streamhost that the
                     timeout=>int)          user selected if mode is set
                                            to "block".

                                            streamhosts is the same
                                            format as the array ref
                                            returned from
                                            ByteStreamsProxyParse.

                                            See MODES above for using
                                            the mode and timeout.

  Disco Functions
    DiscoInfoRequest(jid=>string, - sends a disco#info request to
                     node=>string,  the jid passed as an argument,
                     mode=>string,  and the node if specified.
                     timeout=>int)  Returns a hash with the resulting
                                    tree if mode is set to "block".

                                    See DiscoInfoParse for the format
                                    of the resulting tree.

                                    See MODES above for using the mode
                                    and timeout.

    DiscoInfoParse(Net::Jabber::Query) - parses the query and
                                         returns a hash ref
                                         to the resulting tree:

             $info{identity}->[0]->{category} = "groupchat";
             $info{identity}->[0]->{name} = "Public Chatrooms";
             $info{identity}->[0]->{type} = "public";

             $info{identity}->[1]->{category} = "groupchat";
             $info{identity}->[1]->{name} = "Private Chatrooms";
             $info{identity}->[1]->{type} = "private";

             $info{feature}->{http://jabber.org/protocol/disco#info} = 1;
             $info{feature}->{http://jabber.org/protocol/muc#admin} = 1;

    DiscoItemsRequest(jid=>string, - sends a disco#items request to
                      mode=>string,  the jid passed as an argument.
                      timeout=>int)  Returns a hash with the resulting
                                     tree if mode is set to "block".

                                     See DiscoItemsParse for the format
                                     of the resulting tree.

                                     See MODES above for using the mode
                                     and timeout.

    DiscoItemsParse(Net::Jabber::Query) - parses the query and
                                          returns a hash ref
                                          to the resulting tree:

             $items{jid}->{node} = name;

             $items{"proxy.server"}->{""} = "Bytestream Proxy Server";
             $items{"conf.server"}->{"public"} = "Public Chatrooms";
             $items{"conf.server"}->{"private"} = "Private Chatrooms";

  Feature Negotiation Functions
    FeatureNegRequest(jid=>string,       - sends a feature negotiation to
                      features=>hash ref,  the jid passed as an argument,
                      mode=>string,        using the features specified.
                      timeout=>int)        Returns a hash with the resulting
                                           tree if mode is set to "block".

                                           See DiscoInfoQuery for the format
                                           of the features hash ref.

                                           See DiscoInfoParse for the format
                                           of the resulting tree.

                                           See MODES above for using the mode
                                           and timeout.

    FeatureNegParse(Net::Jabber::Query) - parses the query and
                                          returns a hash ref
                                          to the resulting tree:

             $features->{feat1} = ["opt1","opt2",...];
             $features->{feat2} = ["optA","optB",...];
             ....

                                          If this is a result:

             $features->{feat1} = "opt2";
             $features->{feat2} = "optA";
             ....

    FeatureNeqQuery(hash ref) - takes a hash ref and turns it into a
                                feature negotiation query that you can
                                AddQuery into your packaet.  The format
                                of the hash ref is as follows:

             $features->{feat1} = ["opt1","opt2",...];
             $features->{feat2} = ["optA","optB",...];
             ....

  File Transfer Functions
    FileTransferOffer(jid=>string,         - sends a file transfer stream
                      sid=>string,           initiation to the jid passed
                      filename=>string,      as an argument.  Returns the
                      mode=>string,          method (if the users accepts),
                      timeout=>int)          undef (if the user declines),
                                             if the mode is set to "block".

                                             See MODES above for using
                                             the mode and timeout.

  Last Functions
    LastQuery(to=>string,     - asks the jid specified for its last
              mode=>string,     activity.  If the to is blank, then it
              timeout=>int)     queries the server.  Returns a hash with
    LastQuery()                 the various items set if mode is set to
                                "block":

                                  $last{seconds} - Seconds since activity
                                  $last{message} - Message for activity

                                See MODES above for using the mode
                                and timeout.

    LastSend(to=>string, - sends the specified last to the specified jid.
             hash)         the hash is the seconds and message as shown
                           in the Net::Jabber::Query man page.

    LastActivity() - returns the number of seconds since the last activity
                     by the user.

  Multi-User Chat Functions
    MUCJoin(room=>string,    - Sends the appropriate MUC protocol to join
            server=>string,    the specified room with the specified nick.
            nick=>string,
            password=>string)

  Register Functions
    RegisterSendData(string|JID, - takes the contents of the hash and
                     hash)         builds a jabebr:x:data return packet
                                   which it sends in a Net::Jabber::Query
                                   jabber:iq:register namespace packet.
                                   The first argument is the JID to send
                                   the packet to.  This function returns
                                   an array that looks like this:

                                     [ type , message ]

                                   If type is "ok" then registration was
                                   successful, otherwise message contains
                                   a little more detail about the error.

  RPC Functions
    RPCParse(IQ object) - returns an array.  The first argument tells
                          the status "ok" or "fault".  The second
                          argument is an array if "ok", or a hash if
                          "fault".

    RPCCall(to=>jid|string,     - takes the methodName and params,
            methodName=>string,   builds the RPC calls and sends it
            params=>array,        to the specified address.  Returns
            mode=>string,         the above data from RPCParse.
            timeout=>int)
                                  See MODES above for using the mode
                                  and timeout.

    RPCResponse(to=>jid|string,      - generates a response back to
                params=>array,         the caller.  If any part of
                faultCode=>int,        fault is specified, then it
                faultString=>string)   wins.

    Note: To ensure that you get the correct type for a param sent
          back, you can specify the type by prepending the type to
          the value:

            "i4:5" or "int:5"
            "boolean:0"
            "string:56"
            "double:5.0"
            "datetime:20020415T11:11:11"
            "base64:...."

    RPCSetCallBacks(method=>function, - sets the callback functions
                    method=>function,   for the specified methods.
                    etc...)             The method comes from the
                                        <methodName/> and is case
                                        sensitive.  The single
                                        arguemnt is a ref to an
                                        array that contains the
                                        <params/>.  The function you
                                        write should return one of two
                                        things:

                                          ["ok", [...] ]

                                        The [...] is a list of the
                                        <params/> you want to return.

                                          ["fault", {faultCode=>1,
                                                     faultString=>...} ]

                                        If you set the function to undef,
                                        then the method is removed from
                                        the list.

  Search Functions
    SearchRequest(to=>string,  - send an <iq/> request to the specified
                  mode=>string,  server/transport, if not specified it
                  timeout=>int)  sends to the current active server.
    SearchRequest()              The function returns a hash that
                                 contains the required fields.   Here
                                 is an example of the hash:

                                 $hash{fields}    - The raw fields from
                                                    the iq:register.  To
                                                    be used if there is
                                                    no x:data in the
                                                    packet.
                                 $hash{instructions} - How to fill out
                                                       the form.
                                 $hash{form}   - The new dynamic forms.

                                 In $hash{form}, the fields that are
                                 present are the required fields the
                                 server needs.

                                 See MODES above for using the mode
                                 and timeout.

    SearchSend(to=>string|JID, - takes the contents of the hash and
               hash)             passes it to the SetSearch function
                                 in the Net::Jabber::Query
                                 jabber:iq:search namespace.  And then
                                 sends the packet.

    SearchSendData(string|JID, - takes the contents of the hash and
                   hash)         builds a jabebr:x:data return packet
                                 which it sends in a Net::Jabber::Query
                                 jabber:iq:search namespace packet.
                                 The first argument is the JID to send
                                 the packet to.

  Time Functions
    TimeQuery(to=>string,     - asks the jid specified for its localtime.
              mode=>string,     If the to is blank, then it queries the
              timeout=>int)     server.  Returns a hash with the various
    TimeQuery()                 items set if mode is set to "block":

                                  $time{utc}     - Time in UTC
                                  $time{tz}      - Timezone
                                  $time{display} - Display string

                                See MODES above for using the mode
                                and timeout.

    TimeSend(to=>string) - sends the current UTC time to the specified
                           jid.

  Version Functions
    VersionQuery(to=>string,     - asks the jid specified for its
                 mode=>string,     client version information.  If the
                 timeout=>int)     to is blank, then it queries the
    VersionQuery()                 server.  Returns ahash with the
                                   various items set if mode is set to
                                   "block":

                                     $version{name} - Name
                                     $version{ver}  - Version
                                     $version{os}   - Operating System/
                                                        Platform

                                  See MODES above for using the mode
                                  and timeout.

    VersionSend(to=>string,   - sends the specified version information
                name=>string,   to the jid specified in the to.
                ver=>string,
                os=>string)

AUTHOR
Ryan Eatmon

COPYRIGHT
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.