AVIFENC(1)

NAME
avifenc - compress an image file to an AVIF file

SYNOPSIS
avifenc [options] input.[jpg|jpeg|png|y4m] output.avif

DESCRIPTION
avifenc compresses an image file to an AVIF file. Input format can be either JPEG, PNG or YUV4MPEG2 (Y4M).

OPTIONS

-h, --help
    Show syntax help.

-V, --version
    Show the version number.

  BASIC OPTIONS

-q, --qcolor Q
    Quality for color in 0..100 where 100 is lossless.

--qalpha Q
    Quality for alpha in 0..100 where 100 is lossless.

-s, --speed S
    Encoder speed in 0..10 where 0 is the slowest, 10 is the fastest. Or `default' or `d' for codec internal defaults. (Default: 6).

  ADVANCED OPTIONS

-j, --jobs J
    Number of jobs (worker threads), or `all' to potentially use as many cores as possible. (Default: all).

--no-overwrite
    Never overwrite existing output file.

-o, --output FILENAME
    Instead of using the last filename given as output, use this filename.

-l, --lossless
    Set all defaults to encode losslessly, and emit warnings when settings/input don’t allow for it.

-d, --depth D
    Output depth, one of 8, 10 or 12. (JPEG/PNG only; For y4m or stdin, depth is retained).

-y, --yuv FORMAT
    Output format, one of `auto' (default), 444, 422, 420 or 400. Ignored for y4m or stdin (y4m format is retained).

    For JPEG, auto honors the JPEG’s internal format, if possible. For grayscale PNG, auto defaults to 400.
    For all other cases, auto defaults to 444.

-p, --premultiply
    Premultiply color by the alpha channel and signal this in the AVIF.

--sharpyuv
    Use sharp RGB to YUV420 conversion (if supported). Ignored for y4m or if output is not 420.

--stdin
    Read y4m frames from stdin instead of files; no input filenames allowed, must set before offering output filename.

--cicp, --nclx P/T/M
    Set CICP values (nclx colr box) (3 raw numbers, use -r to set range flag).

    •   P = color primaries

    •   T = transfer characteristics

    •   M = matrix coefficients

    Use 2 for any you wish to leave unspecified.

-r, --range RANGE
    YUV range, one of `limited' or `l', `full' or `f'. (JPEG/PNG only, default: full; For y4m or stdin, range is retained).

--target-size S
    Set target file size in bytes (up to 7 times slower)

--progressive
    EXPERIMENTAL: Automatically set parameters to encode a simple layered image supporting progressive rendering from a single input frame.

--layered
    EXPERIMENTAL: Encode a layered AVIF. Each input is encoded as one layer and at most 4 layers can be encoded.

-g, --grid MxN
    Encode a single-image grid AVIF with M cols & N rows. Either supply MxN identical W/H/D images, or a single image that can be evenly split into the MxN grid and follow AVIF grid image restrictions. The grid will adopt the color profile of the first image supplied.

-c, --codec C
    Codec to use.

    Possible values depend on the codecs enabled at build time (see --help or --version for the available codecs). Default is auto-selected from the available codecs.

    Possible values are:

    •   aom

    •   rav1e

    •   svt

--exif FILENAME
    Provide an Exif metadata payload to be associated with the primary item (implies --ignore-exif).

--xmp FILENAME
    Provide an XMP metadata payload to be associated with the primary item (implies --ignore-xmp).

--icc FILENAME
    Provide an ICC profile payload to be associated with the primary item (implies --ignore-icc).

--timescale, --fps V
    Timescale for image sequences. If all frames are 1 timescale in length, this is equivalent to frames per second. (Default: 30) If neither duration nor timescale are set, avifenc will attempt to use the framerate stored in a y4m header, if present.

-k, --keyframe INTERVAL
    Maximum keyframe interval for image sequences (any set of INTERVAL consecutive frames will have at least one keyframe). Set to 0 to disable (default).

--ignore-exif
    If the input file contains embedded Exif metadata, ignore it (no-op if absent).

--ignore-xmp
    If the input file contains embedded XMP metadata, ignore it (no-op if absent).

--ignore-profile, --ignore-icc
    If the input file contains an embedded color profile, ignore it (no-op if absent).

--ignore-gain-map
    If the input file contains an embedded gain map, ignore it (no-op if absent).

--qgain-map Q
    Quality for the gain map in 0..100 where 100 is lossless.

--pasp H,V
    Add pasp property (aspect ratio). H=horizontal spacing, V=vertical spacing.

--crop CROPX,CROPY,CROPW,CROPH
    Add clap property (clean aperture), but calculated from a crop rectangle.

--clap WN,WD,HN,HD,HON,HOD,VON,VOD
    Add clap property (clean aperture). Width, Height, HOffset, VOffset (in numerator/denominator pairs).

--irot ANGLE
    Add irot property (rotation) in 0..3. Makes (90 * ANGLE) degree rotation anti-clockwise.

--imir AXIS
    Add imir property (mirroring). 0=top-to-bottom, 1=left-to-right.

--clli MaxCLL,MaxPALL
    Add clli property (content light level information).

--repetition-count N
    Number of times an animated image sequence will be repeated, or `infinite' for infinite repetitions. (Default: infinite).

--  Signal the end of options. Everything after this is interpreted as file names.

  UPDATABLE OPTIONS
The following options can optionally have a :u (or :update) suffix like -q:u Q, to apply only to input files appearing after the option:

-q, --qcolor Q
    Quality for color in 0..100 where 100 is lossless.

--qalpha Q
    Quality for alpha in 0..100 where 100 is lossless.

--qgain-map Q
    Quality for the gain map in 0..100 where 100 is lossless.

--tilerowslog2 R
    log2 of number of tile rows in 0..6. (Default: 0). If specified, switch to manual tiling.

--tilecolslog2 C
    log2 of number of tile columns in 0..6. (Default: 0). If specified, switch to manual tiling.

--autotiling
    Set --tilerowslog2 and --tilecolslog2 automatically. If specified, switch to automatic tiling. avifenc starts in automatic tiling mode.

--scaling-mode N[/D]
    EXPERIMENTAL: Set frame (layer) scaling mode as given fraction. If omitted, the denominator defaults to 1. (Default: 1/1).

--duration D
    Frame durations (in timescales) (default: 1). This option always applies to following inputs with or without the :u suffix.

-a, --advanced KEY[=VALUE]
    Pass an advanced, codec-specific key/value string pair directly to the codec. avifenc will warn on any not used by the codec.

  AOM-SPECIFIC ADVANCED OPTIONS

1.  <key>=<value> applies to both the color (YUV) planes and the alpha plane (if present).

2.  color:<key>=<value> or c:<key>=<value> applies only to the color (YUV) planes.

3.  alpha:<key>=<value> or a:<key>=<value> applies only to the alpha plane (if present). Since the alpha plane is encoded as a monochrome image, the options that refer to the chroma planes, such as enable-chroma-deltaq=B, should not be used with the alpha plane. In addition, the film grain options are unlikely to make sense for the alpha plane.

When used with libaom 3.0.0 or later, any key-value pairs supported by the aom_codec_set_option() function can be used. When used with libaom 2.0.x or older, the following key-value pairs can be used:

aq-mode=M
    Adaptive quantization mode. 0=off (default), 1=variance, 2=complexity, 3=cyclic refresh.

cq-level=Q
    Constant/Constrained Quality level in 0..63, end-usage must be set to cq or q.

enable-chroma-deltaq=B
    Enable delta quantization in chroma planes. 0=disable (default), 1=enable.

end-usage=MODE
    Rate control mode, one of `vbr', `cbr', `cq', or `q'

sharpness=S
    Bias towards block sharpness in rate-distortion optimization of transform coefficients in 0..7. (Default: 0).

tune=METRIC
    Tune the encoder for distortion metric, one of `psnr' or `ssim'. (Default: psnr).

film-grain-test=TEST
    Film grain test vectors in 0..16. 0=none (default), 1=test1, 2=test2, ... 16=test16.

film-grain-table=FILENAME
    Path to file containing film grain parameters.

EXAMPLES

Compress a PNG file to an AVIF file:
    $ avifenc input.png output.avif

REPORTING BUGS

Bugs can be reported on GitHub at:
    https://github.com/AOMediaCodec/libavif/issues

SEE ALSO
avifdec(1)