#LyX 2.5 created this file. For more info see https://www.lyx.org/
\lyxformat 643
\begin_document
\begin_header
\save_transient_properties true
\origin /systemlyxdir/templates/Obsolete/
\textclass agutex
\begin_preamble
% OPTIONAL: To Create numbered lines uncomment these 2 lines:
% \usepackage{lineno}
% \linenumbers*[1]

% Uncomment this line when you want to include figures in draft mode:
% \setkeys{Gin}{draft=false}


% Author names in capital letters:
\authorrunninghead{BALES ET AL.}

% Shorter version of title entered in capital letters:
\titlerunninghead{SHORT TITLE}

% Author mailing address: please repeat this command for
% each author and alphabetize authors. Here are examples:

\authoraddr{R. C. Bales,
Department of Hydrology and Water Resources, University of
Arizona, Harshbarger Building 11, Tucson, AZ 85721, USA.
(roger@hwr.arizona.edu)}

\authoraddr{J. R. McConnell, Division of Hydrologic
Sciences, 123 Main Street, Desert Research Institute, Reno, NV
89512, USA.}

\authoraddr{E. Mosley-Thompson, Department of Geography,
Ohio State University, 123 Orange Boulevard, Columbus, OH 43210,
USA.}

\authoraddr{R. Williams, Department of Space Sciences, University of
Michigan, 123 Brown Avenue, Ann Arbor, MI 48109, USA.}
\end_preamble
\options jgrga
\use_default_options false
\begin_modules
theorems-std
\end_modules
\maintain_unincluded_children no
\language english
\language_package none
\inputencoding auto-legacy
\fontencoding auto
\font_roman "default" "default"
\font_sans "default" "default"
\font_typewriter "default" "default"
\font_math "auto" "default"
\font_default_family default
\use_non_tex_fonts false
\font_sc false
\font_roman_osf false
\font_sans_osf false
\font_typewriter_osf false
\font_sf_scale 100 100
\font_tt_scale 100 100
\use_microtype false
\use_dash_ligatures true
\graphics default
\default_output_format default
\output_sync 0
\bibtex_command bibtex
\index_command default
\paperfontsize default
\spacing single
\use_hyperref false
\papersize default
\use_geometry false
\use_package amsmath 1
\use_package amssymb 1
\use_package cancel 1
\use_package esint 1
\use_package mathdots 1
\use_package mathtools 1
\use_package mhchem 1
\use_package stackrel 1
\use_package stmaryrd 1
\use_package undertilde 1
\cite_engine natbib
\cite_engine_type authoryear
\biblio_style plainnat
\use_bibtopic false
\use_indices false
\paperorientation portrait
\suppress_date false
\justification default
\crossref_package prettyref
\use_formatted_ref 0
\use_minted 0
\use_lineno 0
\backgroundcolor none
\fontcolor none
\notefontcolor lightgray
\boxbgcolor red
\table_border_color default
\table_odd_row_color default
\table_even_row_color default
\table_alt_row_colors_start 1
\index Index
\shortcut idx
\color #008000
\end_index
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\paragraph_indentation default
\is_math_indent 0
\math_numbering_side default
\quotes_style english
\dynamic_quotes 0
\papercolumns 1
\papersides 1
\paperpagestyle default
\tablestyle default
\tracking_changes false
\output_changes false
\change_bars false
\postpone_fragile_content false
\html_math_output 0
\html_css_as_file 0
\html_be_strict false
\docbook_table_output 0
\docbook_mathml_prefix 1
\docbook_mathml_version 0
\end_header

\begin_body

\begin_layout Standard
\begin_inset Note Note
status open

\begin_layout Plain Layout
This is an OBSOLETE template \SpecialChar LyX
 file for articles to be submitted to Journals of the American Geophysical Union (AGU).
 How to install the AGU\SpecialChar TeX
 \SpecialChar LaTeX
 class to your \SpecialChar LaTeX
 system is explained in 
\begin_inset Flex URL
status open

\begin_layout Plain Layout
https://wiki.lyx.org/Examples/AGUTeX
\end_layout

\end_inset

:
 the new AGU class name is 
\family sans
agujournal.cls
\family default
.
 A template LyX file and the corresponding layout are pending.
\end_layout

\end_inset


\end_layout

\begin_layout Standard
\begin_inset Note Note
status open

\begin_layout Plain Layout

\series bold
Note
\series default
:
 To be able to compile Agu\SpecialChar TeX
 articles,
 assure that in the menu 
\family sans
Document\SpecialChar menuseparator
Settings\SpecialChar menuseparator
Language
\family default
 the option 
\family sans
Language package
\family default
 is set to 
\family sans
None
\family default
.
\end_layout

\begin_layout Plain Layout
(For all other documents it is highly recommended to use 
\family sans
Default
\family default
!)
\end_layout

\end_inset


\end_layout

\begin_layout Standard
\begin_inset Note Note
status open

\begin_layout Plain Layout
The Journal is specified as document class option in the document settings!
 For the available document class options have a look at the agutex documentation:
 
\begin_inset Flex URL
status open

\begin_layout Plain Layout
http://texnology.com/agudocs.pdf
\end_layout

\end_inset


\end_layout

\begin_layout Plain Layout
The addresses of the authors are given in the document preamble.
\end_layout

\end_inset


\end_layout

\begin_layout Title
Title of article
\end_layout

\begin_layout Authors
R.
 C.
 Bales,
 
\begin_inset Flex Affiliation Mark
status collapsed

\begin_layout Plain Layout
1
\end_layout

\end_inset


\begin_inset Newline newline
\end_inset

E.
 Mosley-Thompson,
 
\begin_inset Flex Affiliation Mark
status collapsed

\begin_layout Plain Layout
2
\end_layout

\end_inset


\begin_inset Newline newline
\end_inset

R.
 Williams,
 
\begin_inset Flex Affiliation Mark
status collapsed

\begin_layout Plain Layout
3
\end_layout

\end_inset


\begin_inset Newline newline
\end_inset

and J.
 R.
 McConnell
\begin_inset Flex Affiliation Mark
status collapsed

\begin_layout Plain Layout
4
\end_layout

\end_inset


\end_layout

\begin_layout Author affiliation
\begin_inset Argument 1
status open

\begin_layout Plain Layout
1
\end_layout

\end_inset

Department of Hydrology and Water Resources,
 University of Arizona,
 Tucson,
 Arizona,
 USA.
\end_layout

\begin_layout Author affiliation
\begin_inset Argument 1
status open

\begin_layout Plain Layout
2
\end_layout

\end_inset

Department of Geography,
 Ohio State University,
 Columbus,
 Ohio,
 USA.
\end_layout

\begin_layout Author affiliation
\begin_inset Argument 1
status open

\begin_layout Plain Layout
3
\end_layout

\end_inset

Department of Space Sciences,
 University of Michigan,
 Ann Arbor,
 Michigan,
 USA.
\end_layout

\begin_layout Author affiliation
\begin_inset Argument 1
status open

\begin_layout Plain Layout
4
\end_layout

\end_inset

Division of Hydrologic Sciences,
 Desert Research Institute,
 Reno,
 Nevada,
 USA.
\end_layout

\begin_layout Abstract
(Type abstract here)
\end_layout

\begin_layout Standard
\begin_inset ERT
status collapsed

\begin_layout Plain Layout

\backslash
begin{article}
\end_layout

\end_inset


\begin_inset Note Note
status open

\begin_layout Plain Layout
starts the article
\end_layout

\end_inset


\end_layout

\begin_layout Section
Introduction
\end_layout

\begin_layout Standard
(Article text here)
\end_layout

\begin_layout Standard
\begin_inset Formula 
\begin{eqnarray}
A & = & \prod^{\infty}_{i=1}B\nonumber \\
 & = & C
\end{eqnarray}

\end_inset


\end_layout

\begin_layout Standard
...as shown by 
\begin_inset CommandInset citation
LatexCommand citet
key "jskilby,inproceedings-minimal"
literal "true"

\end_inset

.
 ....has been shown 
\begin_inset CommandInset citation
LatexCommand citep
key "jskilbye"
literal "true"

\end_inset

.
\end_layout

\begin_layout Subsection
Subsection
\end_layout

\begin_layout Enumerate
test
\end_layout

\begin_layout Enumerate
test
\end_layout

\begin_layout Subsubsection
Subsubsection
\end_layout

\begin_layout Standard
Bla,
 bla
\end_layout

\begin_layout Section*
Appendix:
 Title
\end_layout

\begin_layout Standard
Appendix,
 only when needed.
\end_layout

\begin_layout Section*
Glossary
\end_layout

\begin_layout Standard
Glossary is only allowed in Reviews of Geophysics!
\end_layout

\begin_layout Paragraph
glossary term
\end_layout

\begin_layout Standard
Term Definition here
\end_layout

\begin_layout Notation
Term 
\begin_inset ERT
status collapsed

\begin_layout Plain Layout
&
\end_layout

\end_inset

 definition.
\begin_inset Note Note
status open

\begin_layout Plain Layout
A notation is of course optional
\end_layout

\end_inset


\begin_inset Newline newline
\end_inset

Second Term 
\begin_inset ERT
status collapsed

\begin_layout Plain Layout
&
\end_layout

\end_inset

 second definition.
\end_layout

\begin_layout Acknowledgments
(Text here)
\end_layout

\begin_layout Section*
—
—
—
—
—
–
\end_layout

\begin_layout Standard
You can use either Bib\SpecialChar TeX
.
\begin_inset Note Note
status open

\begin_layout Plain Layout
Remember though that your final submission is supposed to have all the bibliography entries embedded in the \SpecialChar LaTeX
-file.
 This means you eventually have to copy the .bbl file into the latex file at this position.
 Follow these steps:
\end_layout

\begin_layout Enumerate
Run \SpecialChar LaTeX
 on your \SpecialChar LaTeX
 file.
\end_layout

\begin_layout Enumerate
Run BiB\SpecialChar TeX
 on your \SpecialChar LaTeX
 file.
\end_layout

\begin_layout Enumerate
Open the new .bbl file containing the reference list and copy all the contents into your \SpecialChar LaTeX
 file here.
\end_layout

\begin_layout Enumerate
Comment out the old 
\backslash
bibliographystyle and 
\backslash
bibliography commands.
\end_layout

\begin_layout Enumerate
Run \SpecialChar LaTeX
 on your new file before submitting.
 AGU does not want a .bib or a .bbl file,
 but asks that you copy in the contents of your .bbl file here.
\end_layout

\end_inset


\end_layout

\begin_layout Standard
\begin_inset CommandInset bibtex
LatexCommand bibtex
bibfiles "xampl"
options "agu"

\end_inset


\end_layout

\begin_layout Section*
—
—
—
—
—
—
—

\end_layout

\begin_layout Standard
\noindent
Or plain bibliography:
\end_layout

\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
label "\\textit{Kilby}(2008)"
key "jskilby"
literal "true"

\end_inset

Kilby,
 J.
 S.
 (2008),
 Invention of the integrated circuit,
 
\emph on
IEEE Trans.
 Electron Devices,

\emph default
 
\shape italic
23
\shape default
,
 648–650.
\end_layout

\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
label "\\textit{Kilby et al.}(2008)"
key "jskilbye"
literal "true"

\end_inset

Kilby,
 J.
 S.,
 S.
 Smith,
 and R.
 Jones (2008),
 Invention of the integrated circuit,
 
\emph on
IEEE Trans.
 Electron Devices,

\emph default
 
\shape italic
23
\shape default
,
 648–650.
\end_layout

\begin_layout Standard
\begin_inset ERT
status collapsed

\begin_layout Plain Layout

\backslash
end{article}
\end_layout

\end_inset


\begin_inset Note Note
status open

\begin_layout Plain Layout
ends the article
\end_layout

\end_inset


\end_layout

\begin_layout Standard
\begin_inset Note Note
status open

\begin_layout Plain Layout
Enter Figures and Tables here:
\end_layout

\end_inset


\end_layout

\begin_layout Standard
\begin_inset Float figure
placement document
alignment document
wide false
sideways false
status open

\begin_layout Plain Layout
\align center

\family sans
A single column figure goes here
\end_layout

\begin_layout Plain Layout
\begin_inset Caption Standard

\begin_layout Plain Layout
Captions go 
\emph on
under
\emph default
 the figure
\end_layout

\end_inset


\end_layout

\end_inset


\end_layout

\begin_layout Standard
\begin_inset Float table
placement document
alignment document
wide false
sideways false
status open

\begin_layout Plain Layout
\begin_inset Caption Standard

\begin_layout Plain Layout
Table captions go 
\emph on
above
\emph default
 the table
\end_layout

\end_inset


\end_layout

\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="2" columns="2">
<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
<row>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text

\begin_layout Plain Layout
delete
\end_layout

\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text

\begin_layout Plain Layout
this
\end_layout

\end_inset
</cell>
</row>
<row>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text

\begin_layout Plain Layout
example
\end_layout

\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text

\begin_layout Plain Layout
table
\end_layout

\end_inset
</cell>
</row>
</lyxtabular>

\end_inset


\end_layout

\end_inset


\end_layout

\end_body
\end_document
