logapp(1)

NAME
logapp - An application output supervisor.

SYNOPSIS
logapp
[option]... application [--logapp_option]... [app.-argument]...

applicationsymlink
[--logapp_option]... [application-argument]...

Instead of calling logapp directly you can also create a symlink with the name of the application pointing to logapp. Logapp will automatically start the application the name points to. It will also work if the symlink name is prefixed with log.

DESCRIPTION
Logapp is a wrapper utility that helps supervise the execution of applications that produce heavy console output (e.g. make, CVS and Subversion). It does this by logging, trimming, and coloring each line of the output before displaying it. It can be called instead of the executable that should be monitored; it then starts the application and logs all of its console output to a file. The output shown in the terminal is preprocessed, e.g. to limit the length of printed lines and to show the stderr output in a different color. It is also possible to automatically highlight lines that match a certain regular expression. The output is therefore reduced to the necessary amount, and all important lines are easy to identify.

OPTIONS
The options provided before the application argument are processed directly by logapp. Options provided after the application argument are only parsed if they are prefixed with \FC--logapp_\F[] (long option names only) otherwise they are passed to the application. If logapp is called via a symlink all unprefixed options are passed to the application.

Every application usually uses two independent output streams: stdout for normal output and stderr for errors and important messages. Both of them are handled independently by logapp, therefore many options are available for both streams.

Bool options are accepting 1/0 and true/false as value. For long boolean options the value can be omitted, in that case it will be assumed to be 'true'.

  GENERAL OPTIONS

\FC-?\F[], \FC--help\F[]
    Show a short overview over all available options.

\FC--version\F[]
    Show version information.

\FC--configfile=\F[]FILE
    Use a specific configuration file instead of searching the configuration search paths.

\FC--showconfig\F[]
    Print the current configuration of logapp and exit before the application is executed. This can be used this to check if all configuration options are setup correctly if something doesn't work as expected.

\FC--configsection=\F[]NAME
    Enable a specific section in the configuration file. If this option is not provided the application name is used as default.

\FC--disable\F[]
    This disables logapp data handling completely. The application is still started, but logapp won't touch the data streams coming from the application. Neither logging nor output formating is performed, only the execution time and the exit state tracked. This is useful if logapp won't be able to deal with expected data correctly, for example when starting curses based applications. Have a look at \FC--disable_keywords\F[] to see how this option can be enabled automatically.

\FC--disable_keywords=\F[]keywordlist
    With this option a list of comma separated keywords can be provided which will cause the \FC--disable\F[] to be enabled automatically if found in the applications option list. This is useful if an application usually provides line-based output, but creates binary data or uses a curses based frontend if called with a specific parameter. You can also use the \FC--detectescape\F[] option for another way to do this without disabling the logging functionality.

\FC--detectescape=\F[]bool
    This option can be used to switch escape-sequence detection on or off. With escape-sequence detection logapp will automatically enable char-based stream handling as soon as an escape-sequence is part of the specific stream. This behavior can be useful if you are working with an application that is usually line-based, but starts other applications which may be using escape sequences to format the screen. This option will prevent the terminal from being messed up in that case.

\FC--dumbterm=\F[]bool
    With this option set to true there will be no terminal output coloring for stdout and stderr. Normally this option is disabled and logapp tries to detect "dumb" terminals itself.

\FC--usepty=\F[]bool
    This option is only available if logapp has been compiled with PTY support. If PTY support is enabled with this option set to true, logapp will open a pseudo terminal for stdout. This helps wenn running logapp with applications that usually need a real terminal for output. You can disable this option for most line based applications like make, CVS or Subversion. Other applications like telnet or picocom may produce strange results when used without PTY support.

\FC--ptyremovecr=\F[]bool
    This option is only available if logapp has been compiled with PTY support. When using a pseudo terminal for getting the application output you will always get CR-LF line endings, which is usually not desired when working in UNIX environments. With this option enabled, logapp will automatically translate all CR-LF line endings in LF line endings. This option is enabled as default.

\FC--stdout_blen=\F[]bytes

\FC--stderr_blen=\F[]bytes
    The line buffer size can be adjusted for stdout and stderr independently with this option. If the value is too small, lines will be split up if the buffer is full. The default is 2048 byte which should be big enough for most applications.

\FC--stdout_charbased=\F[]bool

\FC--stderr_charbased=\F[]bool
    If you want to use logapp with applications that do not produce line based output you can enable this options for stdout and stderr independently. With this option enabled logapp won't expect complete lines and will handle data as it comes in. By default all single data packets are written to a new line if this option is enabled, this can be changed with the \FC--alignlog\F[] option. If the result will be usable depends on what kind of data is generated by the application.

\FC--extended-regexp=\F[]bool
    If this option is enabled logapp will interpret provided regular expression patterns as extended regular expressions. The default is to use basic regular expressions.

  LOGGING OPTIONS
This section contains options that affect the logfile.

\FC-l\F[], \FC--logfile=\F[]file
    This option can be used to change the file that is used for storing the logged application data. If an empty string is provided, logging is disabled and no logfile will be created. The default is that logapp creates a logfile called logapp.log in the current directory.

\FC-a\F[], \FC--appendlog=\F[]bool
    This option specifies if the logfile will be truncated or if the data will be appended to an existing file on logapp startup.

\FC--maxlogsize=\F[]kibyte
    To limit the maximum size of the logfile you can set this option to a value between 10 and 4000000 kiBytes. The default is 0 which disables the logfile size limit. There are different ways implemented how the logfile is limited. Have a look at the options \FC--logrename\F[] and \FC--circularlog\F[] to learn more. The default way is that the extension \FC.old\F[] is added to the logfile and a new logfile is started.

\FC--logrename=\F[]bool
    This option specifies the behavior when a logfile is to be truncated. If \FC--logrename\F[] is enabled the logfile is renamed. The new filename will be the same as before with the extension defined with \FC--oldlogext\F[] added. The default extension is \FC.old\F[]. This option is used together with the value of \FC--appendlog\F[] and \FC--maxlogsize\F[]

\FC--circularlog=\F[]bool
    If this option is enabled together with a logfile size limit set with \FC--maxlogsize\F[], the logfile will be used in a circular way. This means if the maximum size is reached, the file pointer is set to the beginning of the file and the old content is overwritten from the beginning. There are tags added to the logfile to help navigating in the file.

\FC--oldlogext=\F[]extension
    This defines the extion that is used when logapp is renaming a logfile. The \FC--logrename\F[] option defines if logapp will rename the file and the default extension is \FC.old\F[].

\FC--locklogfile=\F[]bool
    With this option active the logfile is locked in order to prevent it to be overwritten by another task. This is useful if otherwise an unreadable mix up of different contents would be the result. Depending on the value of the \FC--maxaltlogfiles\F[] option another logfile is chosen with the same name and a number added. Logfile locking is activated by default.

\FC--warnlogfilelock=\F[]bool
    This options defines if there should be a warning printed to the console if the chosen logfile is already locked or in other means not accessible. In this case there will be a message before the application is started and directly after its execution where the name of the alternative logfile is mentioned. This option is enabled by default. Also have a look at the \FC--printlogname\F[] where you can define to always get the current logfile reported.

\FC--printlogname=\F[]bool
    This option defines if the name of the used logfile should be printed after the application has finished its execution. This option is disabled by default. Also have a look at the \FC--warnlogfilelock\F[] where you can enable/disable a warning if the logfile name is changed because of a locked logfile.

\FC--maxaltlogfiles=\F[]number
    This options defines the maximum number that can be added to the logfile name, if the original file is not accessible. On logapp startup it will be checked if the currently defined logfile is writeable, if this is not the case automatically a number is added to the filename. If the alternative file is also not accessible this number is increased until a file is writable or the value of maxaltlogfiles is reached. In the latter case the application will exit with an error. If a value of 0 is used only the original logfile name is tried. Also have a look at the \FC--warnlogfilelock\F[] and \FC--printlogname\F[] options to define if there should be messages about the currently used logfile.

\FC--alignlog=\F[]bool
    This option is used together with \FC--stdout_charbased\F[] and \FC--stderr_charbased\F[] and defines if data packets are written to the logfile as they come or if they are each written to a new line. The default is that each data packet is written to a new line, set this option to false to disable it.

\FC--alignlinebreaks=\F[]bool
    This option is used together with \FC--stdout_charbased\F[] and \FC--stderr_charbased\F[] and aligns the lines to the left in the logfile with regard to prefix and timestamp. This option is enabled by default.

\FC--jointimeout=\F[]time
    This option is used together with \FC--stdout_charbased\F[] and \FC--stderr_charbased\F[] and defines a ms timeout for joining single packets to one. This means if for example two chars get written within the timeout, they are treated as one packet. This is best used together with \FC--alignlog\F[] and \FC--logtime\F[]. Use this option if the data packets have lost their coherency for some reason (e.g. if the data comes through a serial line). This feature is disabled by default and can be enabled by setting time to a value bigger than 0 ms.

\FC-t\F[], \FC--logtime=\F[]bool
    This option can be enabled to add a ms timestamp to each line of the logfile. Normally the time since the application start is used, but this can be changed with the \FC--logreltime\F[] option.

\FC--logreltime=\F[]bool
    If this option is set this to true, the \FC--logreltime\F[] option will use the relative time since the last line for the logged timestamps.

\FC--logenv=\F[]bool
    With this option set to true logapp will add a list of all active environment variables to the logfile. This option is disabled by default.

\FC-p\F[], \FC--stdout_lineprefix=\F[]prefix

\FC-P\F[], \FC--stderr_lineprefix=\F[]prefix
    To be able to distinguish stdout and stderr output in the logfile logapp can prefix each line with a string that indicates if the line belongs to a specific data stream. Those strings can be changed with this option. The default is that stdout does not have a prefix and stderr is prefixed with STDERR:.

  CONSOLE OUTPUT OPTIONS
This section contains options that affect the visual output on the console.

\FC--dumbterm=\F[]bool
    This option disables output coloring. This is usually done automatically if a dumb terminal is detected.

\FC-s\F[], \FC--print_summary=\F[]bool
    If this option is set to true, then a short summary will be printed after the application has terminated. This option is disabled by default.

\FC-f\F[], \FC--stdout_fgcol=\F[]color

\FC-F\F[], \FC--stderr_fgcol=\F[]color
    This options define the foreground color for the specific data stream. The value can be one of the entries in the console color table at the end of this section.

\FC-b\F[], \FC--stdout_bold=\F[]bool

\FC-B\F[], \FC--stderr_bold=\F[]bool
    This options define if the font for the specific data stream should be printed bold.

\FC-r\F[], \FC--stdout_regexp=\F[]regular expression

\FC-R\F[], \FC--stderr_regexp=\F[]regular expression
    The regular expression that can be defined with this option is applied to every line of the specific data stream. On a match the background color changes to the value provided with the \FC--stdout_regexp_bgcol\F[] respectively \FC--stderr_regexp_bgcol\F[] option.

\FC--stdout_regexp_bgcol=\F[]color

\FC--stderr_regexp_bgcol=\F[]color
    This options define the background color for the specific data stream for the case that the appropriate regular expression provided with \FC--stdout_regexp\F[] or \FC--stderr_regexp\F[] matches. The value can be one of the entries in the console color table at the end of this section.

\FC-c\F[], \FC--stdout_clip=\F[]width

\FC-C\F[], \FC--stderr_clip=\F[]width
    This options define at which column the output should be clipped for the specific stream to reduce the amount of data written to the console. If a value of -1 is provided clipping is disabled for the stream. A value of -2 sets the clipping to the current console width. It is also possible to use disable and auto instead of the numeric values. The default is that stdout is limited to the console width and that clipping is deactivated for stderr.

    Console color table
    # | color
    -1 | (console) default
    0 | black
    1 | red
    2 | green
    3 | brown
    4 | blue
    5 | magenta
    6 | cyan
    7 | white

  COMMAND EXECUTION OPTIONS
This section contains options that configure the execution of commands on regular expression matches.

\FC--exitonexecfail=\F[]BOOL
    This option defines if logapp should exit and end the wrapped application if the return value of an executed command indicates a failure. As default this option is disabled and logapp ignores the return state of executed commands.

\FC--preexec=\F[]command
    The command that can be provided with this option is executed directly before the application is started. At this time the header is already written to the logfile and can be parsed by the command.

\FC--postexec=\F[]command
    The command that can be provided with this option is executed directly after the application has exited. At this time the logfile is already closed for writing so all application output and the footer are already included and can be processed by the command.

\FC-e\F[], \FC--stdout_execregexp=\F[]regular expression

\FC-E\F[], \FC--stderr_execregexp=\F[]regular expression
    The regular expression that can be defined with this option is applied to every line of the specific data stream. On a match the command provided with the \FC--stdout_execcommand\F[] respectively \FC--stderr_execcomand\F[] option is executed. An empty value for this option disables the regular expression matching.

\FC-x\F[], \FC--stdout_execcommand=\F[]command

\FC-X\F[], \FC--stderr_execcommand=\F[]command
    This option defines the command that is executed on a regular expression match. The regular expression can be defined separately for the stdout and stderr stream with the \FC--stdout_execregexp\F[] respectively \FC--stderr_execregexp\F[] option.

REGULAR EXPRESSIONS
Regular expressions are patterns that describe strings. Logapp uses this patterns to execute actions based on strings found in the data stream. The implementation is identical to the one that is used by grep.

Logapp understands the "basic" and "extended" syntax of regular expressions as defined by POSIX. The default is to use the basic set, but you can switch to extended patterns with the \FC--extended-regexp\F[] parameter. Please have a look at the grep(1) and regex(7) manpage for detailed information.

  EXAMPLES

\FCString\F[]
    Matches "String"

\FC^String\F[]
    Matches "String" at the beginning of a line

\FCString$\F[]
    Matches "String" at the end of a line

\FC^String$\F[]
    Line contains only "String"

\FC[Ss]tring\F[]
    Matches "String" or "string"

\FCStr.ng\F[]
    The dot matches all characters, so this matches for example "String" or "Strong"

\FCStr.*ng\F[]
    The dot together with star matches any number of characters, so this matches for example "String" or "Streaming"

\FC^[A-Z] *\F[]
    Matches any one of the characters from A to Z at the beginning of a line followed by zero or any number of spaces

\FCString\|Word\F[]
    Matches "String" or "Word" when working with basic regular expressions

\FCString|Word\F[]
    Matches "String" or "Word" when working with extended regular expressions

ENVIRONMENT

TERM
    This variable is checked to see which type of console logapp is running in. Currently only the value dumb is handled in a special way — by disabling console colors. If the TERM variable is missing also a dumb terminal is assumed. The setting can be overridden by enabling/disabling the dumb terminal mode using the \FC--dumbterm\F[] option.

FILES

\FC~/.logapprc\F[], \FC/etc/logapp.conf\F[], \FC/etc/logapp/logapp.conf\F[]
    Configuration file locations that are tried if no \FC--configfile\F[] option is provided.

BUGS
See the \FCTODO\F[] file included in the source package.

SEE ALSO
grep(1), regex(7)

AUTHOR
Michael Brunner

COPYING
Copyright (C) 2007–2011 Michael Brunner

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the General Public License for more details.