# Character Map Manual

Character Map is a Unicode character map that allows you to select characters from a table and insert then in to a text string.

2004
Sun Microsystems
2003
2004
Chee Bin HOH
GNOME Documentation Project

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any later version published by the Free Software Foundation with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy of the GFDL at this link or in the file COPYING-DOCS distributed with this manual.

This manual is part of a collection of GNOME manuals distributed under the GFDL. If you want to distribute this manual separately from the collection, you can do so by adding a copy of the licence to the manual, as described in section 6 of the licence.

Many of the names used by companies to distinguish their products and services are claimed as trademarks. Where those names appear in any GNOME documentation, and the members of the GNOME Documentation Project are made aware of those trademarks, then the names are in capital letters or initial capital letters.

DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT:

1. DOCUMENT IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND

2. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.

Sun
GNOME Documentation Team
Sun Microsystems
Chee Bin
HOH
GNOME Documentation Project

     cbhoh@gnome.org

GNOME Documentation Project
Character Map Manual V2.1
2004-02-26

Updated for GNOME 2.6, program version 1.3.0.

Sun GNOME Documentation Team

GNOME Documentation Project

Unicode Character Map Manual V2.0
October 2003

Chee Bin HOH cbhoh@gnome.org

GNOME Documentation Project

This manual describes version 1.3.0 of Character Map.

## Feedback

To report a bug or make a suggestion regarding the Character Map application or this manual, visit the GNOME Issue Tracker.

## Introduction

The Character Map application allows you to insert special characters into a document or a text field. Character Map provides accented characters, mathematical symbols, special symbols, and punctuation marks. Use Character Map to access characters that are not available on your keyboard.

Character Map displays all the characters are available in all of the language scripts on your system, using the Unicode character set. Unicode is a character set standard with the goal to include all of the characters that are used in all of the written languages in the world.

## Getting Started

### To Start Character Map

You can start Character Map in the following ways:

Applications menu

  Choose Accessories Character Map.

Command line

  Execute the following command: `gnome-character-map`

### When You Start Character Map

When you start Character Map, the following window is displayed.

#### Character Map Window

Shows Character Map window.

The Character Map window contains the following elements:

Menubar

  The menus on the menubar contain most of the commands that you need to work with Character Map.

Toolbar

  The toolbar contains a drop-down list of fonts, font style buttons, and a zoom spin box.

Display area

  The display area contains the following components:

  - Script or Unicode Block list box

  - Character Table tabbed section

  - Character Details tabbed section

  - Text to copy text box

  - Copy button

Status bar

  The status bar displays the currently selected character's Unicode code point and Unicode character name.

## Usage

### To Change the Character-Set List

To list the character sets by script name, choose View By Script.

To list the character sets by Unicode block, choose View By Unicode Block.

### To Create a Text String

To create a text string in the Text to copy field, perform the following steps:

1. Select a character set from the Script or Unicode Block list box.

2. Insert characters in one of the following ways:

   - Double-click on a character button in the Character Table tabbed section, to insert the character in the Text to copy field.

   - Select a character button in the Character Table tabbed section, then press Return to insert the character in the Text to copy field.

   - Select a character button in the Character Table tabbed section, then click and drag the character to the Text to copy field.

   - Click on the Text to copy field to give focus to the field. If a text string is already in the field, click on the text string at the point where you want to insert the character. Press a character key on your keyboard to insert that character into the field.

### To Copy and Paste Your Text String into an Application

To copy and paste the text string from the Text to copy field into an application, perform the following steps:

1. Click Copy. If none or all of the text string is selected, all of the string is copied to the clipboard. If a portion of the string is selected, only that portion is copied.

2. Switch to your application and choose Ctrl V Edit Paste.

When you paste the contents of the Text to copy field into other applications, the text string appears in the current character set of the application.

If your text string contains non-visible characters, you can only insert the text string into applications that support the full character set.

### To Search for a Character

To search for a character, perform the following steps:

1. Choose Ctrl F Search Find. The Find dialogue opens.

2. Enter text to search for in the Search field.

   - Select Match whole word to only find complete words that match your text.

   - By default, only the character names are searched. Select Search in character details to search in other parts of a character's description, such as notes, equivalents, and approximate equivalents.

3. Click Next to find the first occurrence of your text after the currently selected character. Character Map selects the character it finds.

4. Click Next to find the next matching character. Alternatively, choose Ctrl G Search Find Next.

5. Click Previous to find the previous matching character. Alternatively, choose Shift Ctrl G Search Find Previous.

### To Browse Through all Characters

To browse through the character map, use the Go menu.

- Next character, or press the shortcut key Ctrl N.

- Previous character, or press the shortcut key Ctrl P.

- Next script, or press the shortcut key Ctrl Page Down.

- Previous script, or press the shortcut key Ctrl Page Up.

You can browse the character map by individual character, and script or by Unicode block. This depends on whether the character map is showing scripts or Unicode blocks. To change this, choose View By Script or View By Unicode Block.

The following keys also work for browsing the character map:

- Press the arrow keys on the keyboard to browse through the characters.

- Press the Page Up and Page Down keys to browse through the characters page by page.

- Press the Home key to select the first character in the Unicode sequence. To select the last character, press the End key.

### To Display Detailed Information About a Character

To display detailed information about a character, perform the following steps:

1. Select a character set from the Script or Unicode Block list box. Example: Basic Latin

2. Select a character from the Character Table tabbed section. Example: B

3. Click on the Character Details tabbed section.

The Character Details tabbed section displays the following information about the selected character:

- Unicode code point

  Example: U+0042

- Unicode character name

  Example: LATIN CAPITAL LETTER B

- General Character Properties

  - Unicode category

    Example: Letter, Uppercase

- Various Useful Representations

  - UTF-8 encoding

    Example: 0x42

  - UTF-16 encoding

    Example: 0x0042

  - C octal escaped UTF-8 encoding

    Example: \102

  - XML decimal entity

    Example: "&#66"

- Annotations and Cross References

  Example: U+212C SCRIPT CAPITAL B

  Click on the link to display the details for the referenced character.

### To Change the Format of a Character

To change the format of a character, perform any of the following steps:

- To change the font, select a font from the font drop-down list.

- To change the font type to bold type, click on the Bold button, or press the shortcut key Alt B.

- To change the font type to italic type, click on the Italic button, or press the shortcut key Alt I.

- To increase the font size, choose Ctrl+View Zoom In, or use the zoom spin box.

- To decrease the font size, choose Ctrl-View Zoom Out, or use the zoom spin box.

- To display normal font size, choose Ctrl=View Normal Size.

- To magnify the selected character, hold Shift.

### To Change the Format of the Character Table

To change the format of the character table, choose View Snap Columns to Power of Two.

Character Map changes the Character Table tabbed section so that the number of columns is a power of two, for example, two columns, four columns, eight columns, and so on. The number of columns depends on the size of the window and the size of the font.