2018-04-13  Paul A. Clarke  <pc@us.ibm.com>

	PR target/83402
	* config/rs6000/emmintrin.h (_mm_slli_epi{16,32,64}):
	Ensure that vec_splat_s32 is only called with 0 <= shift < 16.
	Ensure negative shifts result in {0}.

2018-04-13  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/79916
	* config/rs6000/rs6000.c (rs6000_emit_move): Use assigned hard
	regs (if any) to define how to gnerate SD moves when LRA is in
	progress.

2018-04-13  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85393
	* except.h (expand_dw2_landing_pad_for_region): Remove declaration.
	* except.c (expand_dw2_landing_pad_for_region): Make static.
	* bb-reorder.c (fix_up_crossing_landing_pad): In new_bb emit just
	a label and unconditional jump to old_bb, rather than
	expand_dw2_landing_pad_for_region insn(s) and jump to single_succ
	basic block.

	PR rtl-optimization/85376
	* simplify-rtx.c (simplify_const_unary_operation): For CLZ and CTZ and
	zero op0, if C?Z_DEFINED_VALUE_AT_ZERO is false, return NULL_RTX
	instead of a specific value.

2018-04-13  Jan Hubicka  <hubicka@ucw.cz>
	    Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/82965
	PR tree-optimization/83991
	* cfgloopanal.c (expected_loop_iterations_unbounded): Add
	by_profile_only parameter.
	* cfgloopmanip.c (scale_loop_profile): Further scale loop's profile
        information if the loop was predicted to iterate too many times.
	* cfgloop.h (expected_loop_iterations_unbounded): Update prototype

2018-04-13  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/71991
	* config/i386/i386.c (ix86_can_inline_p): Allow safe transitions for
	always inline.

2018-04-13  Martin Liska  <mliska@suse.cz>
	    Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/81657
	* expr.h (enum block_op_methods): Add BLOCK_OP_NO_LIBCALL_RET.
	* expr.c (emit_block_move_hints): Handle BLOCK_OP_NO_LIBCALL_RET.
	* builtins.c (expand_builtin_memory_copy_args): Use
	BLOCK_OP_NO_LIBCALL_RET method for mempcpy with non-ignored target,
	handle dest_addr == pc_rtx.

2018-04-12  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85291
	* config/rs6000/rs6000.md (fix_trunc<mode>si2): Use legacy code if
	asked to not generate direct moves.
	(fix_trunc<mode>si2_stfiwx): Similar.
	(fix_trunc<mode>si2_internal): Similar.

2018-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83157
	* var-tracking.c (add_stores): Handle STRICT_LOW_PART SET_DEST.
	* cselib.c (cselib_record_sets): For STRICT_LOW_PART dest,
	lookup if dest in some wider mode is known to be const0_rtx and
	if so, record permanent equivalence for it to be ZERO_EXTEND of
	the narrower mode destination.

2018-04-12  Cesar Philippidis  <cesar@codesourcery.com>

	* lto-streamer-out.c (output_function): Revert 259346.
	* omp-expand.c (expand_oacc_for): Likewise.

2018-04-12  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/85354
	* sel-sched-ir.c (sel_init_pipelining): Move cfg_cleanup call...
	* sel-sched.c (sel_global_init): ... here.

2018-04-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/85238
	* lto-wrapper.c (debug_objcopy): Open the files in binary mode.
	* dwarf2out.c (dwarf2out_early_finish): Do not generate assembly in LTO
	mode for PE-COFF targets.
	* config/i386/i386-protos.h (i386_pe_asm_lto_start): Declare.
	(i386_pe_asm_lto_end): Likewise.
	* config/i386/cygming.h (TARGET_ASM_LTO_START): Define.
	(TARGET_ASM_LTO_END): Likewise.
	* config/i386/winnt.c (saved_debug_info_level): New static variable.
	(i386_pe_asm_lto_start): New function.
	(i386_pe_asm_lto_end): Likewise.

2018-04-12  Cesar Philippidis  <cesar@codesourcery.com>
	    Richard Biener  <rguenther@suse.de>

	PR middle-end/84955
	* lto-streamer-out.c (output_function): Fix CFG loop state before
	streaming out.
	* omp-expand.c (expand_oacc_for): Handle calls to internal
	functions like regular functions.

2018-04-12  Richard Biener  <rguenther@suse.de>

	PR lto/85371
	* dwarf2out.c (init_sections_and_labels): Use debug_line_section[_label]
	for the early LTO debug to properly generate references to it
	during DIE emission.  Do not re-use that for the skeleton for
	split-dwarf.
	(dwarf2out_early_finish): Likewise.

2018-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/85328
	* config/i386/sse.md
	(<mask_codefor>avx512dq_vextract<shuffletype>64x2_1<mask_name> split,
	<mask_codefor>avx512f_vextract<shuffletype>32x4_1<mask_name> split,
	vec_extract_lo_<mode><mask_name> split, vec_extract_lo_v32hi,
	vec_extract_lo_v64qi): For non-AVX512VL if input is xmm16+ reg
	and output is a reg, avoid creating invalid lowpart subreg, but
	instead split into a 512-bit move.  Don't split if not AVX512VL,
	input is xmm16+ reg and output is a mem.
	(vec_extract_lo_<mode><mask_name>, vec_extract_lo_v32hi,
	vec_extract_lo_v64qi): Don't require split if not AVX512VL, input is
	xmm16+ reg and output is a mem.

2018-04-12  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* config/s390/s390.c (s390_output_indirect_thunk_function): Check
	also for flag_dwarf2_cfi_asm.

2018-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85342
	* regcprop.c (copyprop_hardreg_forward_1): Remove replaced array, use
	a bool scalar var inside of the loop instead.  Don't try to update
	recog_data.operand after failed apply_change_group.

2018-04-12  Tom de Vries  <tom@codesourcery.com>

	PR target/85296
	* config/nvptx/nvptx.c (flexible_array_member_type_p): New function.
	(nvptx_assemble_decl_begin): Add undefined param.  Declare undefined
	array with flexible array member as array without given dimension.
	(nvptx_assemble_undefined_decl): Set nvptx_assemble_decl_begin call
	argument for undefined param to true.

2018-04-11  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/85321
	* doc/invoke.texi (RS/6000 and PowerPC Options): Document options
	-mcall- and -mtraceback=. Remove options -mabi=spe and -mabi=no-spe
	from PowerPC section.
	* config/rs6000/sysv4.opt (mcall-): Improve help text.
	* config/rs6000/rs6000.opt (mblock-compare-inline-limit=): Trim
	help text that is too long.
	* config/rs6000/rs6000.opt (mblock-compare-inline-loop-limit=): Trim
	help text that is too long.
	* config/rs6000/rs6000.opt (mstring-compare-inline-limit=): Trim
	help text that is too long.

2018-04-11  Uros Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.md (stack_probe_internal): Rename
	from "probe_stack".  Update all callers.

2018-04-11  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/84566
	* sched-deps.c (sched_analyze_insn): Check deps->readonly when invoking
	sched_macro_fuse_insns.

2018-04-11  Alexander Monakov  <amonakov@ispras.ru>

	PR target/84301
	* sched-rgn.c (add_branch_dependences): Move sel_sched_p check here...
	(compute_block_dependences): ... from here.

2018-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/85331
	* vec-perm-indices.h (vec_perm_indices::clamp): Change input type
	from int to HOST_WIDE_INT.

2018-04-11  Martin Jambor  <mjambor@suse.cz>

	PR ipa/84149
	* ipa-cp.c (propagate_vals_across_pass_through): Expand comment.
	(cgraph_edge_brings_value_p): New parameter dest_val, check if it is
	not the same as the source val.
	(cgraph_edge_brings_value_p): New parameter.
	(gather_edges_for_value): Pass destination value to
	cgraph_edge_brings_value_p.
	(perhaps_add_new_callers): Likewise.
	(get_info_about_necessary_edges): Likewise and exclude values brought
	only by self-recursive edges.
	(create_specialized_node): Redirect only clones of self-calling edges.
	(+self_recursive_pass_through_p): New function.
	(find_more_scalar_values_for_callers_subset): Use it.
	(find_aggregate_values_for_callers_subset): Likewise.
	(known_aggs_to_agg_replacement_list): Removed.
	(decide_whether_version_node): Re-calculate known constants for all
	remaining context clones.

2018-04-11  Richard Biener  <rguenther@suse.de>

	PR lto/85339
	* dwarf2out.c (dwarf2out_finish): Remove DW_AT_stmt_list attribute
	from early DWARF output.
	(dwarf2out_early_finish): Output line info unconditionally into
	early DWARF and add reference to it.

2018-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/85281
	* config/i386/sse.md (iptr): Add V16SFmode and V8DFmode cases.
	(<avx512>_vec_dup<mode><mask_name>): Use a single pattern for modes
	other than V2DFmode using iptr mode attribute.
	(<avx512>_vec_dup<mode><mask_name>): Use iptr mode attribute.

2018-04-11  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/84659
	* sel-sched-ir.c (sel_init_pipelining): Invoke cleanup_cfg.

2018-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR debug/85302
	* dwarf2out.c (skip_loc_list_entry): Don't call size_of_locs if
	SIZEP is NULL.
	(output_loc_list): Pass address of a dummy size variable even in the
	locview handling loop.
	(index_location_lists): Add comment on why skip_loc_list_entry can't
	call size_of_locs.

2018-04-11  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	PR target/85261
	* config/arm/arm-builtins.c (arm_expand_builtin): Force input operand
	into register.

2018-04-10  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/85321
	* doc/invoke.texi (RS/6000 and PowerPC Options): Document options
	-mblock-compare-inline-limit, -mblock-compare-inline-loop-limit,
	and -mstring-compare-inline-limit.

2018-04-10  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85287
	* gcc/config/rs6000/rs6000.md (allocate_stack): Put the residual size
	for stack clash protection in a register whenever we need it to be in
	a register.

2018-04-10  Segher Boessenkool  <segher@kernel.crashing.org>

	* common/config/rs6000/rs6000-common.c (rs6000_option_init_struct):
	Enable -fasynchronous-unwind-tables by default if OBJECT_FORMAT_ELF.

2018-04-10  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85321
	* config/rs6000/rs6000.opt (mtraceback=): Show the allowed values in
	the help text.
	(mlong-double-): Ditto.
	* config/rs6000/sysv4.opt (msdata=): Ditto.
	(mtls-size=): Ditto.

2018-04-10  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Remove
	erroneous entries for
	"vector int vec_ldl (int, long int *)", and
	"vector unsigned int vec_ldl (int, unsigned long int *)".
	Add comments and entries for
	"vector bool char vec_ldl (int, bool char *)",
	"vector bool short vec_ldl (int, bool short *)",
	"vector bool int vec_ldl (int, bool int *)",
	"vector bool long long vec_ldl (int, bool long long *)",
	"vector pixel vec_ldl (int, pixel *)",
	"vector long long vec_ldl (int, long long *)",
	"vector unsigned long long vec_ldl (int, unsigned long long *)".
	* config/rs6000/rs6000.c (rs6000_init_builtins): Initialize new
	type tree bool_long_long_type_node and correct definition of
	bool_V2DI_type_node to make reference to this new type tree.
	(rs6000_mangle_type): Replace erroneous reference to
	bool_long_type_node with bool_long_long_type_node.
	* config/rs6000/rs6000.h (enum rs6000_builtin_type_index): Add
	comments to emphasize sign distinctions for char and int types and
	replace RS6000_BTI_bool_long constant with
	RS6000_BTI_bool_long_long constant.  Also add comment to restrict
	use of RS6000_BTI_pixel.
	(bool_long_type_node): Remove this macro definition.
	(bool_long_long_type_node): New macro definition

2018-04-10  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85300
	* combine.c (subst): Handle subst of CONST_SCALAR_INT_P new_rtx also
	into FLOAT and UNSIGNED_FLOAT like ZERO_EXTEND, return a CLOBBER if
	simplify_unary_operation fails.

2018-04-10  Martin Liska  <mliska@suse.cz>

	* gdbhooks.py: Add pretty-printers for varpool_node, symtab_node,
	cgraph_edge and ipa_ref.

2018-04-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/85177
	PR target/85255
	* config/i386/sse.md
	(<extract_type>_vinsert<shuffletype><extract_suf>_mask): Fix
	computation of the VEC_MERGE selector from mask.
	(<extract_type>_vinsert<shuffletype><extract_suf>_1<mask_name>):
	Fix decoding of the VEC_MERGE selector into mask.

2018-04-10  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/85286
	* tree-vect-data-refs.c (vect_get_smallest_scalar_type):

2018-04-10  Richard Sandiford  <richard.sandiford@linaro.org>

	* final.c (final_1): Set insn_last_address as well as
	insn_current_address.

2018-04-10  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/85173
	* explow.c (emit_stack_probe): Call validize_mem on memory location
	before passing it to gen_probe_stack.  Create address operand and
	legitimize it for the probe_stack_address case.

2018-04-09  Jan Hubicka  <jh@suse.cz>

	PR lto/85078
	* ipa-devirt.c (rebuild_type_inheritance-hash): New.
	* ipa-utils.h (rebuild_type_inheritance-hash): Declare.
	* tree.c (free_lang_data_in_type): Fix handling of binfos;
	walk basetypes.
	(free_lang_data): Rebuild type inheritance graph.

2018-04-09  Martin Sebor  <msebor@redhat.com>

	* invoke.texi (-finline-small-functions): Mention other optimization
	options.
	(-findirect-inlining, -fpartial-inlining): Same.
	(-finline-functions-called-once): Same.
	(-freorder-blocks-and-partition): Same.

2018-04-09  Jan Hubicka  <jh@suse.cz>

	PR rtl/84058
	* cfgcleanup.c (try_forward_edges): Do not give up on crossing
	jumps; choose last target that matches the criteria (i.e.
	no partition changes for non-crossing jumps).
	* cfgrtl.c (cfg_layout_redirect_edge_and_branch): Add basic
	support for redirecting crossing jumps to non-crossing.

2018-04-09  Alexey Brodkin  <abrodkin@synopsys.com>

	* config/arc/arc.c (arc_expand_prologue): Set stack usage info
	also for naked functions.

2018-04-09  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (add_shift): New pattern.
	(add_shift2): Likewise.
	(sub_shift): Likewise.
	(sub_shift_cmp0_noout): Likewise.
	(compare_si_ashiftsi): Likewise.
	(xbfu_cmp0_noout): New combine pattern.
	(xbfu_cmp0"): Likewise.
	(movsi_set_cc_insn): Place the predicable variant first.
	(commutative_binary_cmp0_noout): Remove clobber.
	(commutative_binary_cmp0): New pattern.
	(noncommutative_binary_cmp0): Likewise.
	(noncommutative_binary_cmp0_noout): Likewise.
	(noncommutative_binary_comparison_result_used): Removed.
	(rsub_cmp0): New pattern.
	(rsub_cmp0_noout): Likewise.
	(extzvsi): Changed, keep only meaningful variants.
	(SQH, SEZ): New iterators.
	(SQH_postfix): New mode attribute.
	(SEZ_prefix): New code attribute.
	(<SEZ_prefix>xt<SQH_postfix>_cmp0_noout): New instruction pattern.
	(<SEZ_prefix>xt<SQH_postfix>_cmp0): Likewise.
	* config/arc/predicates.md (cc_set_register): Use CC_REG instead
	of numerical value.
	(noncommutative_operator): Check the availability of barrel
	shifter option.

2018-04-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85284
	* tree-ssa-loop-niter.c (number_of_iterations_exit_assumptions):
	Only use the niter constraining form of simple_iv when the exit
	is always executed.

2018-04-09  Tom de Vries  <tom@codesourcery.com>

	PR target/84041
	* config/nvptx/nvptx.md (define_c_enum "unspecv"): Add UNSPECV_MEMBAR.
	(define_expand "*memory_barrier"): New define_expand.
	(define_insn "memory_barrier"): New insn.

2018-04-09  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/80463
	PR rtl-optimization/83972
	PR rtl-optimization/83480

	* sel-sched-ir.c (has_dependence_note_mem_dep): Take into account the
	correct producer for the insn.
	(tidy_control_flow): Fixup seqnos in case of debug insns.

2018-04-09  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/83913

	* sel-sched-ir.c (merge_expr_data): Choose the middle between two
	different sched-times when merging exprs.

2018-04-09  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/83962

	* sel-sched-ir.c (tidy_control_flow): Correct the order in which we call
	tidy_fallthru_edge and tidy_control_flow.

2018-04-09  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/83530

	* sel-sched.c (force_next_insn): New global variable.
	(remove_insn_for_debug): When force_next_insn is true, also leave only
	next insn in the ready list.
	(sel_sched_region): When the region wasn't scheduled, make another pass
	over it with force_next_insn set to 1.

2018-04-08  Monk Chiang  <sh.chiang04@gmail.com>

	* config.gcc (nds32le-*-*, nds32be-*-*): Add nds32/nds32_intrinsic.h
	into tm_file.
	* config/nds32/constants.md (unspec_volatile_element): Add enum values
	for interrupt control.
	* config/nds32/nds32-intrinsic.c: Implementation of intrinsic
	functions for interrupt control.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.

2018-04-08  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_init_machine_status,
	nds32_legitimate_index_p, nds32_legitimate_address_p): Consider
	strict_aligned_p field.
	(nds32_expand_to_rtl_hook): New function.
	(TARGET_EXPAND_TO_RTL_HOOK): Define.
	* config/nds32/nds32.h (machine_function): Add strict_aligned_p field.

2018-04-08  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that n7 is valid to --with-cpu.
	* config/nds32/nds32-n7.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type): Add CPU_N7.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n7
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n7 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add n7.
	* config/nds32/nds32.opt (mcpu): Support n7 pipeline cpus.
	* config/nds32/pipelines.md: Include n7 settings.

2018-04-08  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that e8 is valid to --with-cpu.
	* config/nds32/nds32-e8.md: New file.
	* config/nds32/nds32-opts.h (nds32-cpu_type): Add CPU_E8.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for e8
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for e8 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add e8.
	* config/nds32/nds32.opt (mcpu): Support e8 pipeline cpus.
	* config/nds32/pipelines.md: Include e8 settings.

2018-04-08  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that n6/n8/s8 are valid to --with-cpu.
	* config/nds32/nds32-n8.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type): Add CPU_N6 and CPU_N8.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n8
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n8 pipeline.
	* config/nds32/nds32-utils.c: More implementations for n8 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add n8.
	* config/nds32/nds32.opt (mcpu): Support n8 pipeline cpus.
	* config/nds32/pipelines.md: Include n8 settings.

2018-04-08  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*): Add nds32-utils.o into extra_objs.
	* config/nds32/nds32-n9-2r1w.md: New file.
	* config/nds32/nds32-n9-3r2w.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type, nds32_mul_type,
	nds32_register_ports): New or modify for cpu n9.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n9
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n9 pipeline.
	* config/nds32/nds32-utils.c: New file.
	* config/nds32/nds32.h (TARGET_PIPELINE_N9, TARGET_PIPELINE_SIMPLE,
	TARGET_MUL_SLOW): Define.
	* config/nds32/nds32.md (pipeline_model): New attribute.
	* config/nds32/nds32.opt (mcpu, mconfig-mul, mconfig-register-ports):
	New options that support cpu n9.
	* config/nds32/pipelines.md: Include n9 settings.
	* config/nds32/t-nds32 (nds32-utils.o): Add dependency.

2018-04-08  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (output_cond_branch): Output align
	information if necessary.
	(output_cond_branch_compare_zero): Likewise.
	* config/nds32/nds32.c (nds32_adjust_insn_length): Consider align case.
	(nds32_target_alignment): Refine for alignment.
	* config/nds32/nds32.h (NDS32_ALIGN_P): Define.
	(FUNCTION_BOUNDARY): Modify.
	* config/nds32/nds32.md (call_internal, call_value_internal): Consider
	align case.
	* config/nds32/nds32.opt (malways-align, malign-functions): New.

2018-04-08  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add values for
	TLB operation and data prefetch.
	* config/nds32/nds32-intrinsic.c: Implementation of intrinsic
	functions for TLB operation and data prefetch.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.c (nds32_dpref_names): Likewise.
	(nds32_print_operand): Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.

2018-04-07  Thomas Koenig  <tkoenig@gcc.gnu.org>
	Andrew Pinski <pinsika@gcc.gnu.org>

	PR middle-end/82976
	* match.pd: Use constant_boolean_node of correct type instead of
	boolean_true_node or boolean_false_node for simplifying
	pointer comparisons to zero.

2018-04-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/80021
	* tree.c (verify_type_variant): Make error call in verify_variant_match
	translatable and remove final full stop.

2018-04-07  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add
	UNSPEC_VOLATILE_EH_RETURN.
	* config/nds32/nds32-md-auxiliary.c (nds32_output_stack_push,
	nds32_output_stack_pop): Support dwarf exception handling process.
	* config/nds32/nds32-protos.h (nds32_dynamic_chain_address): Declare.
	* config/nds32/nds32.c (nds32_init_machine_status): Support dwarf
	exception handling process.
	(nds32_compute_stack_frame): Likewise.
	(nds32_return_addr_rtx): Likewise.
	(nds32_initial_elimination_offset): Likewise.
	(nds32_expand_prologue): Likewise.
	(nds32_expand_epilogue): Likewise.
	(nds32_dynamic_chain_address): New function.
	* config/nds32/nds32.h (machine_function): Add fields for dwarf
	exception handling.
	(DYNAMIC_CHAIN_ADDRESS): Define.
	(EH_RETURN_DATA_REGNO): Define.
	(EH_RETURN_STACKADJ_RTX): Define.
	* config/nds32/nds32.md (eh_return, nds32_eh_return): Implement
	patterns for dwarf exception handling.

2018-04-07  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h: Clean up obsolete macros.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_element, unspec_volatile_element):
	Add enum values for particular instructions.
	* config/nds32/nds32-intrinsic.c: Implementation of expanding
	particular intrinsic functions.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.
	* config/nds32/nds32.md (type): Add pbsad and pbsada.
	(btst, ave): New patterns for particular instructions.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_element, unspec_volatile_element):
	Add enum values for atomic load/store and memory sync.
	* config/nds32/nds32-intrinsic.c: Implementation for atomic load/store
	and memory sync.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.

2018-04-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/85257
	* fold-const.c (native_encode_vector): If not all elts could fit
	and off is -1, return 0 rather than offset.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Pass
	(offseti - offset2) / BITS_PER_UNIT as 4th argument to
	native_encode_expr.  Verify len * BITS_PER_UNIT >= maxsizei.  Don't
	adjust buffer in native_interpret_expr call.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add cache
	control enum values.
	* config/nds32/nds32-intrinsic.c: Add cache control expand functions.
	* config/nds32/nds32-intrinsic.md: Add cache control patterns.
	* config/nds32/nds32.c (nds32_cctl_names): New.
	(nds32_print_operand): Handle cache control register names.
	* config/nds32/nds32.h (nds32_builtins): New enum values.
	* config/nds32/nds32_intrinsic.h: Add cache control enum types and
	macros.
	* config/nds32/nds32.md (type): Add mmu.
	* config/nds32/pipelines.md (simple_insn): Add mmu.

2018-04-07  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (type): Remove call.
	* config/nds32/pipelines.md (simple_insn): Likewise.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add
	UNSPEC_VOLATILE_FMFCSR, UNSPEC_VOLATILE_FMTCSR and
	UNSPEC_VOLATILE_FMFCFG.
	* config/nds32/nds32-intrinsic.c (bdesc_noarg): New builtin
	description for fmfcfg and fmfcsr.
	(bdesc_1arg): Add fmtcsr.
	(bdesc_2arg): Add fcpynss, fcpyss, fcpynsd and fcpysd.
	(nds32_expand_builtin_impl): Deal with FPU intrinsic functions.
	* config/nds32/nds32-intrinsic.md (unspec_fcpynsd, unspec_fcpysd,
	unspec_fcpynss, unspec_fcpysd, unspec_fcpyss, unspec_fmfcsr,
	unspec_fmfcfg): New patterns.
	* config/nds32/nds32.h (nds32_builtins): Add NDS32_BUILTIN_FMFCFG,
	NDS32_BUILTIN_FMFCSR, NDS32_BUILTIN_FMTCSR, NDS32_BUILTIN_FCPYNSS,
	NDS32_BUILTIN_FCPYSS,NDS32_BUILTIN_FCPYNSD and NDS32_BUILTIN_FCPYSD.
	* config/nds32/nds32_intrinsic.h (__nds32__fcpynsd, __nds32__fcpynss,
	__nds32__fcpysd, __nds32__fcpyss, __nds32__fmfcsr, __nds32__fmtcsr,
	__nds32__fmfcfg): Define.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32.c (nds32_intrinsic_register_names): Add more
	intrinsic register names.
	* config/nds32/nds32_intrinsic.h (nds32_intrinsic_registers): Add more
	intrinsic register enum values and macros.

2018-04-07  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_legitimate_index_p): Modify condition
	for load/store addressing form.
	(nds32_print_operand_address): Likewise.

2018-04-06  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/85196
	* config/sparc/sparc.c (sparc_expand_move): Deal with symbolic operands
	based on LABEL_REF.  Remove useless assertion.
	(pic_address_needs_scratch): Fix formatting.
	(sparc_legitimize_pic_address): Minor tweaks.
	(sparc_delegitimize_address): Adjust assertion accordingly.
	* config/sparc/sparc.md (movsi_pic_label_ref): Change label_ref_operand
	into symbolic_operand.
	(movsi_high_pic_label_ref): Likewise.
	(movsi_lo_sum_pic_label_ref): Likewise.
	(movdi_pic_label_ref): Likewise.
	(movdi_high_pic_label_ref): Likewise.
	(movdi_lo_sum_pic_label_ref): Likewise.

2018-04-06  Amaan Cheval  <amaan.cheval@gmail.com>

	* config.gcc (x86_64-*-rtems*): Add rtems.h to tm_file for
	custom LIB_SPEC setup.

2018-04-06  Ruslan Bukin  <br@bsdpad.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config.gcc (riscv*-*-freebsd*): Add RISC-V FreeBSD support.
	* config/riscv/freebsd.h: New.

2018-04-06  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_adjust_insn_length): Refine.
	* config/nds32/nds32.h (ADJUST_INSN_LENGTH): Change the location in
	file.

2018-04-06  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_output_return,
	nds32_output_call, nds32_symbol_binds_local_p): New functions.
	* config/nds32/nds32-protos.h (nds32_output_call,
	nds32_output_return): Declare.
	* config/nds32/nds32.md: Refine all the call and return patterns.

2018-04-06  Jakub Jelinek  <jakub@redhat.com>

	PR debug/85252
	* dwarf2out.c (rtl_for_decl_init): For STRING_CST initializer only
	build CONST_STRING if TYPE_MAX_VALUE is non-NULL and is INTEGER_CST.

	PR rtl-optimization/84872
	* cfgloopmanip.c (create_preheader): Use make_forwarder_block even if
	nentry == 1 when CP_FALLTHRU_PREHEADERS and single_entry is
	EDGE_CROSSING edge.

2018-04-06  Tamar Christina  <tamar.christina@arm.com>

	* expr.c (copy_blkmode_to_reg): Revert 254862.
	* doc/sourcebuild.texi (word_mode_no_slow_unalign): Likewise.

2018-04-06  Richard Biener  <rguenther@suse.de>

	PR middle-end/85244
	* tree-dfa.c (get_ref_base_and_extent): Reset seen_variable_array_ref
	after seeing a component reference with an adjacent field.  Treat
	refs to arrays at struct end of external decls similar to
	refs to unconstrained commons.

2018-04-06  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/85213
	* fold-const.c (twoval_comparison_p): Remove SAVE_P argument and don't
	look through SAVE_EXPRs with non-side-effects argument.  Adjust
	recursive calls.
	(fold_comparison): Adjust twoval_comparison_p caller, don't handle
	save_p here.

2018-04-06  Richard Biener  <rguenther@suse.de>

	PR middle-end/85180
	* alias.c (find_base_term): New wrapper around find_base_term
	unwinding CSELIB_VAL_PTR changes.
	(find_base_term): Do not restore CSELIB_VAL_PTR during the
	recursion.

2018-04-06  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* config/s390/s390.c (s390_z10_optimize_cmp): Expand dedicated NOP
	instructions.
	* config/s390/s390.md (UNSPECV_NOP_LR_0, UNSPECV_NOP_LR_1): New
	constant definitions.
	("nop"): lr 0,0 -> nopr r0
	("nop_lr0", "nop_lr1"): New insn definitions.

2018-04-06  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (*stack_push, *stack_pop): Use
	NDS32_V3PUSH_AVAILABLE_P macro.

2018-04-06  Monk Chiang  <sh.chiang04@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Add v2j v3f v3s checking.
	(nds32*-*-*): Add float and fpu_config into supported_defaults.
	* common/config/nds32/nds32-common.c (TARGET_DEFAULT_TARGET_FLAGS):
	Include TARGET_DEFAULT_FPU_ISA and TARGET_DEFAULT_FPU_FMA.
	* config/nds32/constants.md (unspec_element): Add UNSPEC_COPYSIGN,
	UNSPEC_FCPYNSD, UNSPEC_FCPYNSS, UNSPEC_FCPYSD and UNSPEC_FCPYSS.
	* config/nds32/constraints.md: New constraints and checking for hard
	float configuration.
	* config/nds32/iterators.md: New mode iterator and attribute for hard
	float configuration.
	* config/nds32/nds32-doubleword.md: Use hard float alternatives and
	patterns.
	* config/nds32/nds32-fpu.md: New file.
	* config/nds32/nds32-md-auxiliary.c: New functions and checkings to
	deal with hard float code generation.
	* config/nds32/nds32-opts.h (nds32_arch_type): Add ARCH_V3F and
	ARCH_V3S.
	(abi_type, float_reg_number): New enum type.
	* config/nds32/nds32-predicates.c: New predicates for hard float.
	* config/nds32/nds32-protos.h: Declare functions for hard float.
	* config/nds32/nds32.c: Implementation for hard float configuration.
	* config/nds32/nds32.h: Definitions for hard float configuration.
	* config/nds32/nds32.md: Include hard float machine description and
	modify patterns for hard float configuration.
	* config/nds32/nds32.opt: New options for hard float configuration.
	* config/nds32/predicates.md: New predicates for hard float
	configuration.

2018-04-06  Kuan-Lin Chen  <kuanlinchentw@gmail.com>

	* common/config/nds32/nds32-common.c
	(nds32_option_optimization_table): Enable -mreleax-hint by default.

2018-04-05  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/85195
	* match.pd (BIT_FIELD_REF CONSTRUCTOR@0 @1 @2): Use view_convert around
	CONSTRUCTOR_ELT (ctor, ...)->value.

2018-04-05  Uros Bizjak  <ubizjak@gmail.com>

	PR target/85193
	* config/i386/i386.md (define_attr "memory"): Handle rotate1 type.

2018-04-05  Tom de Vries  <tom@codesourcery.com>

	PR target/85204
	* config/nvptx/nvptx.c (nvptx_single): Fix neutering of bb with only
	cond jump.

2018-04-05  Shiva Chen  <shiva0217@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/constraints.md (U33): Fine-tune checking condition.
	* config/nds32/nds32-md-auxiliary.c (nds32_mem_format): Ditto.
	* config/nds32/nds32.h (nds32_16bit_address_type): Add
	ADDRESS_POST_MODIFY_LO_REG_IMM3U.

2018-04-05  Shiva Chen  <shiva0217@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/constraints.md (Ufe): New memory constraint.
	* config/nds32/nds32-md-auxiliary.c (nds32_mem_format,
	nds32_output_16bit_load): Consider r8 register for lwi45.fe format.
	* config/nds32/nds32.c (nds32_print_operand): Output lwi45.fe
	operands.
	* config/nds32/nds32.h (nds32_16bit_address_type): Add ADDRESS_R8_IMM7U.
	* config/nds32/nds32.md (*mov<mode>): Adjust pattern.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md: Use optimize_size in the condition for
	alu-shift instructions.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (divsi4, udivsi4): New patterns.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (negsi2): Refine pattern.

2018-04-05  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/iterators.md (shift_rotate): New code iterator.
	(shift): New code attribute.
	* config/nds32/nds32-md-auxiliary.c (nds32_expand_constant): New.
	* config/nds32/nds32-protos.h (nds32_expand_constant): Declare.
	* config/nds32/nds32.c (nds32_print_operand): Deal with more cases.
	* config/nds32/nds32.md (addsi3, *add_srli): Refine implementation for
	bit-wise operations.
	(andsi3, *andsi3): Ditto.
	(iorsi3, *iorsi3, *or_slli, *or_srli): Ditto.
	(xorsi3, *xorsi3, *xor_slli, *xor_srli): Ditto.
	(<shift>si3, *ashlsi3, *ashrsi3, *lshrsi3, *rotrsi3): Ditto.
	* config/nds32/predicates.md (nds32_rimm5u_operand, nds32_and_operand,
	nds32_ior_operand, nds32_xor_operand): New predicates.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (add<mode>3, sub<mode>3): Rename to ...
	(addsi3, subsi3): ... this.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (*sub_srli, *and_slli): Fine-tune predicator.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md: Adjust indention.

2018-04-05  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32.md (feature): New attribute.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (subtype): New attribute.

2018-04-04  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	PR target/85203
	* config/arm/arm-builtins.c (arm_expand_builtin): Change
	expansion to perform a bitwise AND of the argument followed by a
	boolean negation of the result.

2018-04-04  Peter Bergner  <bergner@vnet.ibm.com>

	PR rtl-optimization/84878
	* ddg.c (add_cross_iteration_register_deps): Use DF_REF_BB to determine
	the basic block.  Assert the use reference is not artificial and that
	it has an associated insn.

2018-04-04  Michael Matz  <matz@suse.de>

	* builtins.c (compute_objsize): Pass correct operand
	to array_at_struct_end_p.

2018-04-04  Richard Biener  <rguenther@suse.de>

	PR lto/85176
	* dwarf2out.c (dwarf2out_register_external_die): Peel namespaces
	from contexts for DINFO_LEVEL_TERSE and below.

2018-04-04  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-doubleword.md (move_<mode>): Require
	resiter_operand condition.
	* config/nds32/nds32.md (*move<mode>): Ditto.

2018-04-04  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32.md (movmisalign<mode>): New pattern.

2018-04-04  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (movqi, movhi): Merge into mov<mode>.

2018-04-04  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_inverse_cond_code,
	nds32_cond_code_str, output_cond_branch,
	output_cond_branch_compare_zero, nds32_expand_cbranch,
	nds32_expand_cstore, nds32_expand_movcc,
	nds32_output_cbranchsi4_equality_zero,
	nds32_output_cbranchsi4_equality_reg,
	nds32_output_cbranchsi4_equality_reg_or_const_int,
	nds32_output_cbranchsi4_greater_less_zero: New functions.
	* config/nds32/nds32-protos.h (nds32_expand_cbranch,
	nds32_expand_cstore, nds32_expand_movcc,
	nds32_output_cbranchsi4_equality_zero,
	nds32_output_cbranchsi4_equality_reg,
	nds32_output_cbranchsi4_equality_reg_or_const_int,
	nds32_output_cbranchsi4_greater_less_zero): Declare.
	* config/nds32/predicates.md (nds32_movecc_comparison_operator,
	nds32_rimm11s_operand): New predicates.
	* config/nds32/nds32.h (nds32_expand_result_type): New enum type.
	* config/nds32/nds32.md: Rewrite all the branch and conditional move
	patterns.

2018-04-04  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-doubleword.md: Refine all the instruction type.
	* config/nds32/nds32.md: Ditto.
	* config/nds32/pipelines.md: Ditto.

2018-04-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85168
	* tree-ssa-sccvn.c (vn_reference_maybe_forwprop_address): Avoid
	propagating abnormals.

2018-04-04  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (enabled): Use yes/no for this attribute.

2018-04-04  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_long_call_p): New function.
	* config/nds32/nds32-protos.h (nds32_long_call_p): Declare.
	* config/nds32/nds32.c (nds32_function_ok_for_sibcall): New function.
	(TARGET_FUNCTION_OK_FOR_SIBCALL): Define.
	* config/nds32/nds32.md (sibcall_internal): New.
	(sibcall_register): Remove.
	(sibcall_immediate): Remove.
	(sibcall_value_internal): New.
	(sibcall_value_register): Remove.
	(sibcall_value_immediate): Remove.
	* config/nds32/predicates.md (nds32_general_register_operand): New.
	(nds32_call_address_operand): New.

2018-04-03  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85167
	* shrink-wrap.c (move_insn_for_shrink_wrap): Don't set bb_uses and
	bb_defs if *split_p, instead preinitialize it to NULL.

	PR tree-optimization/85156
	* builtins.c (fold_builtin_expect): Use save_expr on arg1 to avoid
	evaluating the argument multiple times.

2018-04-03  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/emmintrin.h (_mm_cvtpd_epi32): Use __vector rather
	than vector.
	(_mm_cvtpd_ps): Likewise.
	(_mm_cvttpd_epi32): Likewise.
	* config/rs6000/mmintrin.h (_mm_unpacklo_pi8): Likewise.
	* config/rs6000/xmmintrin.h: For strict-ANSI C++ or C11, undefine
	vector, pixel, and bool following altivec.h include.

2018-04-03  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Common Function Attributes): Clarify.
	(const attribute): Likewise.
	(pure attribute): Likewise.

2018-04-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/85169
	* config/i386/i386.c (ix86_expand_vector_set): Use
	HOST_WIDE_INT_1U << elt instead of 1 << elt.  Formatting fix.

2018-04-03  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (emit_i387_cw_initialization): Always use logic
	instructions when changing rounding bits to preserve precision bits
	in the x87 control word.

2018-04-03  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/82491
	* rtl.h (strip_offset_and_add): Replace += suboffset with
	poly_uint64 () + suboffset.

2018-03-29  Martin Liska  <mliska@suse.cz>
	    Martin Jambor  <mjambor@suse.cz>

	PR ipa/84947
	* ipa-cp.c (propagate_bits_across_jump_function): Bail out if
	param_type is not an integral or pointer type.

2018-04-03  Richard Biener  <rguenther@suse.de>

	* sese.h (recompute_all_dominators): Remove.

2018-04-02  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wrestrict): Fix typos.

2018-04-02  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.h (SHIFT_COUNT_TRUNCATED): Set to zero.
	* config/riscv/riscv.md (<optab>si3): Use QImode shift count.
	(<optab>di3, <optab>si3_extend): Likewise.
	(<optab>si3_mask, <optab>si3_mask_1): New.
	(<optab>di3_mask, <optab>di3_mask_1): New.
	(<optab>si3_extend_mask, <optab>si3_extend_mask_1): New.
	(lshrsi3_zero_extend_1): Use VOIDmode shift count.
	* config/riscv/sync.md (atomic_test_and_set): Emit QImode shift count.

2018-04-02  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/cpp.texi (Variadic Macros): Fix line continuation in an
	example.

2018-04-02  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (TARGET_CANONICALIZE_COMPARISON): Define.
	(nds32_canonicalize_comparison): New function.

2018-04-01  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Kuan-Lin Chen  <kuanlinchentw@gmail.com>

	* config.gcc (nds32): Add nds32-relax-opt.o into extra_objs.
	* config/nds32/constants.md (unspec_volatile_element): Add
	UNSPEC_VOLATILE_RELAX_GROUP.
	* config/nds32/nds32-relax-opt.c: New file.
	* config/nds32/nds32-predicates.c
	(nds32_symbol_load_store_p): New function.
	* config/nds32/nds32-protos.h
	(nds32_symbol_load_store_p): Declare function.
	(make_pass_nds32_relax_opt): Declare new rtl pass function.
	* config/nds32/nds32.c
	(nds32_register_pass): New function to register pass.
	(nds32_register_passes): New function to register passes.
	* config/nds32/nds32.md (relax_group): New pattern.
	* config/nds32/nds32.opt (mrelax-hint): New option.
	* config/nds32/t-nds32 (nds32-relax-opt.o): New dependency.

2018-04-01  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/t-nds32: Modify files dependency.

2018-04-01  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (FUNCTION_PROFILER): Output newline character.
	(PROFILE_HOOK): Define its implementation.

2018-04-01  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (WCHAR_TYPE, WCHAR_TYPE_SIZE): Use unsigned int
	type and 32-bit size.

2018-04-01  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/85090
	* config/i386/sse.md (V): Add V64QI and V32HI for TARGET_AVX512F.
	(V_128_256): New mode iterator.
	(*avx512dq_vextract<shuffletype>64x2_1 splitter): New define_split.
	(*avx512f_vextract<shuffletype>32x4_1 splitter): Likewise.
	(xop_pcmov_<mode><avxsizesuffix>): Use V_128_256 mode iterator instead
	of V.
	* config/i386/i386.c (ix86_expand_vector_set): Improve V32HImode and
	V64QImode expansion for !TARGET_AVX512BW && TARGET_AVX512F.

2018-03-31  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/83315
	* config/rs6000/xmmintrin.h (_mm_set_ps, _mm_max_ps): Handle (quiet)
	NaN inputs correctly.

2018-03-30  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/80546
	* config/rs6000/vsx.md (??r): New mode attribute.
	(*vsx_mov<mode>_64bit): Use it.
	(*vsx_mov<mode>_32bit): Likewise.

2018-03-30  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84818
	* builtins.c (check_access): Use warning_n.

2018-03-30  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	PR target/83822
	* config/rs6000/rs6000-string.c (expand_compare_loop): Fix redundant
	condition.
	* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Fix redundant
	condition.

2018-03-30  Julia Koval  <julia.koval@intel.com>

	PR target/84413
	* x86-tune.def (movx, partial_reg_dependency): Enable for
	m_SKYLAKE_AVX512.

2018-03-29  Vladimir Makarov  <vmakarov@redhat.com>

	PR inline-asm/84985
	* lra-constraints.c (process_alt_operands): Move setting
	this_alternative_matches below.

2018-03-29  Martin Liska  <mliska@suse.cz>

	PR lto/84995.
	* doc/invoke.texi: Document how LTO works with debug info.
	Describe auto-load support of binutils.  Mention 'x86-64'
	as valid option value of -march option.

2018-03-29  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/sse.md (<avx512>_blendm<mode>): Use <sseintprefix>.

	PR c/85094
	* fold-const.c (operand_equal_p): Handle DEBUG_BEGIN_STMT.
	For STATEMENT_LIST, pass down OEP_LEXICOGRAPHIC and maybe
	OEP_NO_HASH_CHECK for recursive call, to avoid exponential
	checking.

2018-03-28  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/84912
	* config/rs6000/rs6000.h (RS6000_BTM_POWERPC64): New define.
	(RS6000_BTM_COMMON): Add RS6000_BTM_POWERPC64.
	* config/rs6000/rs6000.c (rs6000_builtin_mask_calculate): Add support
	for RS6000_BTM_POWERPC64.
	(rs6000_invalid_builtin): Add handling for RS6000_BTM_POWERPC64
	(rs6000_builtin_mask_names): Add RS6000_BTM_POWERPC64.
	* config/rs6000/rs6000-builtin.def (BU_P7_POWERPC64_MISC_2): New macro
	definition.
	(DIVDE): Use it.
	(DIVDEU): Likewise.

2018-03-28 Carl Love  <cel@us.ibm.com>

	Revert
	2017-09-27  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def (BU_FP_1MISC_1): Add define macro.
	(FCTID, FCTIW): Add BU_FP_MISC_1 macro expansion for builtins.
	* config/rs6000/rs6000.md (lrintsfsi2): Add define_insn for the
	fctiw instruction.

2018-03-28  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/xmmintrin.h (_mm_max_pi16): Use __vector __bool
	instead of __vector bool.
	(_mm_max_pu8): Likewise.
	(_mm_min_pi16): Likewise.

2018-03-28  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/84912
	* config/rs6000/rs6000-builtin.def (DIVWEO): Delete macro expansion.
	(DIVWEUO): Likewise.
	(DIVDEO): Likewise.
	(DIVDEUO): Likewise.
	* config/rs6000/rs6000.c (builtin_function_type): Remove support for
	DIVWEUO and DIVDEUO.
	* config/rs6000/rs6000.md (UNSPEC_DIVEO, UNSPEC_DIVEUO): Delete unspecs.
	(UNSPEC_DIV_EXTEND): Remove deleted unspecs.
	(div_extend): Likewise.
	* doc/extend.texi (__builtin_divweo): Remove documentation for deleted
	builtin function.
	(__builtin_divweuo): Likewise.
	(__builtin_divdeo): Likewise.
	(__builtin_divdeuo): Likewise.

2018-03-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/85095
	* config/i386/i386.md (*add<mode>3_carry_0, *addsi3_carry_zext_0,
	*sub<mode>3_carry_0, *subsi3_carry_zext_0): New patterns.

	PR tree-optimization/82004
	* gimple-match-head.c (optimize_pow_to_exp): New function.
	* match.pd (pow(C,x) -> exp(log(C)*x)): Wrap with #if GIMPLE.
	Don't fold to exp if optimize_pow_to_exp is false.

2018-03-28  Martin Liska  <mliska@suse.cz>

	PR other/84819
	* calls.c (initialize_argument_information): Fix trailing space.
	* common.opt: Fix typo and provide better explanation for
	-fsanitize-coverage option.
	* config/i386/i386.opt: Fix typo.

2018-03-28  Jakub Jelinek  <jakub@redhat.com>
	    Martin Liska  <mliska@suse.cz>

	PR sanitizer/85081
	* gimplify.c (asan_poison_variable): Don't do the check for
	gimplify_omp_ctxp here.
	(gimplify_decl_expr): Do it here.
	(gimplify_target_expr): Likewise.

2018-03-28  Martin Liska  <mliska@suse.cz>

	PR target/84988
	* config/i386/i386.c (ix86_function_arg_advance): Do not call
	chkp_type_bounds_count if MPX is not enabled.

2018-03-27  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (BRANCH_COST): Adjust cost.

2018-03-27  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/84914
	* config/rs6000/rs6000.c (create_complex_muldiv): New helper
	function to create the function decl for complex long double
	multiply and divide for -mabi=ieeelongdouble.
	(init_float128_ieee): Call it.

2018-03-27  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85044
	* config/i386/i386.c (ix86_trampoline_init): Insert ENDBR for
	-fcf-protection=branch -mibt.
	* config/i386/i386.h (TRAMPOLINE_SIZE): Increased by 4 bytes.

2018-03-27  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	PR target/81863
	* config/arm/arm.c (arm_valid_symbolic_address): Handle arm_word_relocations

2018-03-27  Cesar Philippidis  <cesar@codesourcery.com>

	PR target/85056
	* config/nvptx/nvptx.c (nvptx_assemble_decl_begin): Add '[]' to
	extern array declarations.

2018-03-27  Richard Biener  <rguenther@suse.de>

	PR middle-end/84067
	* match.pd ((A * C) +- (B * C) -> (A+-B) * C): Guard with
	explicit single_use checks.

2018-03-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85082
	* tree-ssa-sccvn.c (vn_reference_lookup_or_insert_for_pieces):
	Valueize the VUSE.

2018-03-27  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config.gcc (aarch64*-*-linux*): New TARGET_DEFAULT_ASYNC_UNWIND_TABLES
	* common/config/aarch64/aarch64-common.c (aarch64_optimization_table[]):
	Turn on fasynchronous-unwind-tables and funwind-tables.

2018-03-26  Uros Bizjak  <ubizjak@gmail.com>

	PR target/85073
	* config/i386/i386.md (*bmi_blsr_<mode>_cmp): New insn pattern.
	(*bmi_blsr_<mode>_ccz): Ditto.

2018-03-26  Tom de Vries  <tom@codesourcery.com>

	PR tree-optimization/85063
	* omp-general.c (offloading_function_p): New function.  Factor out
	of ...
	* omp-offload.c (pass_omp_target_link::gate): ... here.
	* omp-general.h (offloading_function_p): Declare.
	* tree-switch-conversion.c (build_one_array): Mark CSWTCH.x variable
	with attribute omp declare target for offloading functions.

2018-03-24  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84005
	* tree-data-ref.h (get_base_for_alignment): Declare.
	* tree-data-ref.c (get_base_for_alignment_1): New function.
	(get_base_for_alignment): Likewise.
	* tree-vect-data-refs.c (vect_compute_data_ref_alignment): Use
	get_base_for_alignment to find a suitable base object, instead
	of always using drb->base_address.

2018-03-23  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/85022
	* emit-rtl.c (init_emit_regs): Indicate that VOIDmode MEMs don't have
	known size by default.

2018-03-23  Vladimir Makarov  <vmakarov@redhat.com>

	PR inline-asm/85030
	* lra-constraints.c (process_alt_operands): Don't match BLKmode
	and non BLKmode operands.

2018-03-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/85026
	* config/arm/arm.md (unaligned_loadhis): Remove first alternative.
	Clean up attributes.

2018-03-23  Richard Biener  <rguenther@suse.de>

	PR debug/85020
	* dwarf2out.c (rtl_for_decl_location): Do not generate RTL early when
	we are going to emit early debug for LTO.

2018-03-23  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/85034
	* function.c (match_asm_constraints_1): Don't optimize if input
	doesn't satisfy general_operand predicate for output's mode.

	PR inline-asm/85022
	* alias.c (write_dependence_p): Don't require for x_canonicalized
	non-VOIDmode if x has VOIDmode.

	PR sanitizer/85029
	* sanopt.c (maybe_optimize_ubsan_ptr_ifn): If DECL_REGISTER (base),
	just don't try to optimize it rather than assert it never happens.

2018-03-22  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-builtin.def: Remove various BU_ALTIVEC_X
	macro expansions for definition of ST_INTERNAL_<mode> and
	LD_INTERNAL_<mode> builtins.
	* config/rs6000/rs6000-protos.h (rs6000_address_for_altivec):
	Remove prototype.
	* config/rs6000/rs6000.c (altivec_expand_ld_builtin): Delete this
	function.
	(altivec_expand_st_builtin): Likewise.
	(altivec_expand_builtin): Remove calls to deleted functions.
	(rs6000_address_for_altivec): Delete this function.
	* config/rs6000/vector.md: Remove expands for
	vector_altivec_load_<mode> and vector_altivec_store_<mode>.

2018-03-22  Sudakshina Das  <sudi.das@arm.com>

	PR target/84826
	* config/arm/arm.h (machine_function): Add static_chain_stack_bytes.
	* config/arm/arm.c (arm_compute_static_chain_stack_bytes): Avoid
	re-computing once computed.
	(arm_expand_prologue): Compute machine->static_chain_stack_bytes.
	(arm_init_machine_status): Initialize
	machine->static_chain_stack_bytes.

2018-03-22  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/84760
	* doc/extend.texi: Add four new prototypes for vec_ld.
	* config/rs6000/rs6000-builtin.def (LVX_V1TI): Reorder symbol
	definitions for more logical presentation.
	* config/rs6000/rs6000-c.c: (altivec_overloaded_builtins): Add
	entries for V1TI variants of __builtin_altivec_ld builtin.
	* config/rs6000/rs6000.c: (altivec_expand_lv_builtin): Add test and
	handling of V1TI variant of LVX icode pattern.
	(altivec_expand_builtin): Add case for ALTIVEC_BUILTIN_LVX_V1TI.
	(rs6000_gimple_fold_builtin): Likewise.
	(altivec_init_builtins): Add code to define
	__builtin_altivec_lvx_v1ti function.

2018-03-22  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/84941
	* function.c (match_asm_constraints_1): Don't do the optimization
	if input isn't a REG, SUBREG, MEM or constant.

2018-03-22  Tom de Vries  <tom@codesourcery.com>

	PR tree-optimization/84956
	* tree-ssa-tail-merge.c (find_clusters_1): Skip bbs with
	bb_has_abnormal_pred.

2018-03-22  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/85018
	* dwarf2asm.c (dw2_output_indirect_constant_1): Set
	DECL_INITIAL (decl) to decl at the end.
	* varasm.c (use_blocks_for_decl_p): Revert the 2018-03-20 change,
	adjust the comment.

2018-03-21  Joseph Myers  <joseph@codesourcery.com>

	* doc/extend.texi (__builtin_tgmath): Document when complex
	integer types are treated as _Complex _Float64.

2018-03-21  Tom de Vries  <tom@codesourcery.com>

	* doc/extend.texi (__builtin_extend_pointer): Remove pasto.

2018-03-21  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84960
	* tree-cfg.c (remove_bb): Don't move forced labels into bb->prev_bb
	if it is ENTRY block, move them into single succ of ENTRY in that case.

2018-03-21  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84811
	* poly-int.h (poly_span_traits): Remove the T3 parameter and
	promote HOST_WIDE_INT T2 - T1 results to unsigned HOST_WIDE_INT.
	(maybe_in_range_p, known_in_range_p, ranges_known_overlap_p):
	(known_subrange_p): Update accordingly.  Cast each value involved
	in the size comparison, rather than casting the result of the
	subtraction.

2018-03-21  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84982
	* gimple-ssa-store-merging.c (invert_op): Handle boolean inversion
	by flipping the least significant bit rather than all bits from
	bitpos to bitpos + bitsize - 1.

2018-03-21  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Deprecated Features): Remove mention of
	long-deleted deprecations.

2018-03-21  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR jit/84288
	* configure.ac (gcc_cv_ld_soname) <*-*-solaris2*>: Set.
	* configure: Regenerate.

2018-03-21  Tom de Vries  <tom@codesourcery.com>

	PR tree-optimization/83126
	* tree-parloops.c (num_phis): New function.
	(gen_parallel_loop): Detect and handle canonicalize_loop_ivs failure.

2018-03-21  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Deprecated Features): Update deprecated flags,
	mention anon-struct/union members and trailing attributes.

2018-03-21  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/84969
	* tree-loop-distribution.c (fuse_memset_builtins): Don't reorder
	builtin memset partitions if they set different rhs values.

2018-03-21  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/84989
	* simplify-rtx.c (simplify_unary_operation_1): Don't try to simplify
	VEC_DUPLICATE with scalar result mode.

2018-03-21  Martin Liska  <mliska@suse.cz>

	PR ipa/84963
	* ipa-icf.c (sem_item_optimizer::fixup_points_to_sets): Remove
	not intended return statement.

2018-03-21  Martin Liska  <mliska@suse.cz>

	PR target/84988
	* tree-chkp.c (CHKP_ARRAY_MAX_CHECK_STEPS): Define a new macro.
	(chkp_find_bound_slots_1): Limit number of iterations.

2018-03-20  David H. Gutteridge  <dhgutteridge@sympatico.ca>

	PR target/84838
	* Minor grammar fixes for x86 options.

2018-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR debug/84875
	* dce.c (delete_unmarked_insns): Don't remove frame related noop moves
	holding REG_CFA_RESTORE notes, instead turn them into a USE.

2018-03-20  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83789
	* config/rs6000/altivec.md (altivec_lvx_<mode>_2op): Delete define_insn.
	(altivec_lvx_<mode>_1op): Likewise.
	(altivec_stvx_<mode>_2op): Likewise.
	(altivec_stvx_<mode>_1op): Likewise.
	(altivec_lvx_<VM2:mode>): New define_expand.
	(altivec_stvx_<VM2:mode>): Likewise.
	(altivec_lvx_<VM2:mode>_2op_<P:mptrsize>): New define_insn.
	(altivec_lvx_<VM2:mode>_1op_<P:mptrsize>): Likewise.
	(altivec_stvx_<VM2:mode>_2op_<P:mptrsize>): Likewise.
	(altivec_stvx_<VM2:mode>_1op_<P:mptrsize>): Likewise.
	* config/rs6000/rs6000-p8swap.c (rs6000_gen_stvx): Use new expanders.
	(rs6000_gen_lvx): Likewise.
	* config/rs6000/rs6000.c (altivec_expand_lv_builtin): Likewise.
	(altivec_expand_stv_builtin): Likewise.
	(altivec_expand_builtin): Likewise.
	* config/rs6000/vector.md: Likewise.

2018-03-20  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/82518
	* config/arm/arm.c (arm_array_mode_supported_p): Return false for
	BYTES_BIG_ENDIAN.

2018-03-20  Richard Biener  <rguenther@suse.de>

	PR target/84986
	* config/i386/i386.c (ix86_add_stmt_cost): Only cost
	sign-conversions as zero, fall back to standard scalar_stmt
	cost for the rest.

2018-03-20  Martin Liska  <mliska@suse.cz>

	PR ipa/84825
	* predict.c (rebuild_frequencies): Handle case when we have
	PROFILE_ABSENT, but flag_guess_branch_prob is false.

2018-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/84990
	* dwarf2asm.c (dw2_output_indirect_constant_1): Temporarily turn off
	flag_section_anchors.
	* varasm.c (use_blocks_for_decl_p): Remove hack for
	dw2_force_const_mem.

	PR target/84845
	* config/aarch64/aarch64.md (*aarch64_reg_<mode>3_neg_mask2): Rename
	to ...
	(*aarch64_<optab>_reg_<mode>3_neg_mask2): ... this.  If pseudos can't
	be created, use lowpart_subreg of operands[0] rather than operands[0]
	itself.
	(*aarch64_reg_<mode>3_minus_mask): Rename to ...
	(*aarch64_ashl_reg_<mode>3_minus_mask): ... this.
	(*aarch64_<optab>_reg_di3_mask2): Use const_int_operand predicate
	and n constraint instead of aarch64_shift_imm_di and Usd.
	(*aarch64_reg_<optab>_minus<mode>3): Rename to ...
	(*aarch64_<optab>_reg_minus<mode>3): ... this.

2018-03-20  Sudakshina Das  <sudi.das@arm.com>

	PR target/82989
	* config/arm/neon.md (ashldi3_neon): Update ?s for constraints
	to favor GPR over NEON registers.
	(<shift>di3_neon): Likewise.

2018-03-20  Tom de Vries  <tom@codesourcery.com>

	PR target/84952
	* config/nvptx/nvptx.c (nvptx_single): Don't neuter bar.sync.
	(nvptx_process_pars): Emit bar.sync asap and alap.

2018-03-20  Tom de Vries  <tom@codesourcery.com>

	PR target/84954
	* config/nvptx/nvptx.c (prevent_branch_around_nothing): Also update
	seen_label if seen_label is already set.

2018-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/84945
	* config/i386/i386.c (fold_builtin_cpu): For features above 31
	use __cpu_features2 variable instead of __cpu_model.__cpu_features[0].
	Use 1U instead of 1.  Formatting fixes.

	PR c/84953
	* builtins.c (fold_builtin_strpbrk): For strpbrk(x, "") use type
	instead of TREE_TYPE (s1) for the return value.

2018-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84946
	* gimple-ssa-store-merging.c (mem_valid_for_store_merging): Compute
	bitsize + bitsize in poly_uint64 rather than poly_int64.

	PR sanitizer/78651
	* dwarf2asm.c: Include fold-const.c.
	(dw2_output_indirect_constant_1): Set DECL_INITIAL (decl) to ADDR_EXPR
	of decl rather than decl itself.

	PR rtl-optimization/84643
	* memmodel.h (enum memmodel): Add MEMMODEL_MAX enumerator.

2018-03-19  Maxim Ostapenko  <m.ostapenko@samsung.com>

	PR sanitizer/78651
	* dwarf2asm.c (dw2_output_indirect_constant_1): Disable ASan before
	calling assemble_variable.

2018-03-19  Sudakshina Das  <sudi.das@arm.com>

	PR target/81647
	* config/aarch64/aarch64-simd.md (vec_cmp<mode><v_int_equiv>): Modify
	instructions for UNLT, UNLE, UNGT, UNGE, UNEQ, UNORDERED and ORDERED.

2018-03-19  Jim Wilson  <jimw@sifive.com>

	PR bootstrap/84856
	* config/riscv/riscv.c (riscv_function_arg_boundary): Use
	PREFERRED_STACK_BOUNDARY instead of STACK_BOUNDARY.
	(riscv_first_stack_step): Likewise.
	(riscv_option_override): Use STACK_BOUNDARY instead of
	MIN_STACK_BOUNDARY.
	* config/riscv/riscv.h (STACK_BOUNDARY): Renamed from
	MIN_STACK_BOUNDARY.
	(BIGGEST_ALIGNMENT): Set to 128.
	(PREFERRED_STACK_BOUNDARY): Renamed from STACK_BOUNDARY.
	(RISCV_STACK_ALIGN): Use PREFERRED_STACK_BOUNDARY instead of
	STACK_BOUNDARY.

2018-03-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84933
	* tree-vrp.c (set_and_canonicalize_value_range): Treat out-of-bound
	values as -INF/INF when canonicalizing an ANTI_RANGE to a RANGE.

2018-03-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84859
	* tree-ssa-phiopt.c (single_trailing_store_in_bb): New function.
	(cond_if_else_store_replacement): Perform sinking operation on
	single-store BBs regardless of MAX_STORES_TO_SINK setting.
	Generalize what a BB with a single eligible store is.

2018-03-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84929
	* tree-data-ref.c (analyze_siv_subscript_cst_affine): Guard
	chrec_is_positive against non-chrec arg.

2018-03-19  Tamar Christina  <tamar.christina@arm.com>

	PR target/84711
	* config/arm/arm.c (arm_can_change_mode_class): revert r258554.

2018-03-18  Martin Liska  <mliska@suse.cz>

	PR rtl-optimization/84635
	* regrename.c (build_def_use): Use matches_mode only when
	matches >= 0.

2018-03-18  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84913
	* tree-vect-loop.c (vectorizable_reduction): Don't try to
	vectorize chains of COND_EXPRs.

2018-03-18  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (MAX_REGS_PER_ADDRESS): Fix the value.

2018-03-18  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (LOGICAL_OP_NON_SHORT_CIRCUIT): Define.

2018-03-18  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (CLZ_DEFINED_VALUE_AT_ZERO): Define.

2018-03-17  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-protos.h (nds32_adjust_reg_alloc_order): Declare.
	* config/nds32/nds32.c (nds32_reg_alloc_order_for_speed): New array.
	(nds32_adjust_reg_alloc_order): New function.
	* config/nds32/nds32.h (ADJUST_REG_ALLOC_ORDER): Define.

2018-03-17  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32.c (nds32_asm_output_mi_thunk,
	nds32_print_operand, nds32_print_operand_address): Use
	HOST_WIDE_INT_PRINT_DEC instead.

2018-03-17  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_register_priority): Modify cost.

2018-03-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/84902
	* config/i386/i386.c (initial_ix86_tune_features,
	initial_ix86_arch_features): Use unsigned HOST_WIDE_INT rather than
	unsigned long long.
	(set_ix86_tune_features): Change ix86_tune_mask from unsigned int
	to unsigned HOST_WIDE_INT, initialize to HOST_WIDE_INT_1U << ix86_tune
	rather than 1u << ix86_tune.  Formatting fix.
	(ix86_option_override_internal): Change ix86_arch_mask from
	unsigned int to unsigned HOST_WIDE_INT, initialize to
	HOST_WIDE_INT_1U << ix86_arch rather than 1u << ix86_arch.
	(ix86_function_specific_restore): Likewise.

2018-03-16  Jakub Jelinek  <jakub@redhat.com>

	PR target/84899
	* postreload.c (reload_combine_recognize_pattern): Perform
	INTVAL addition in unsigned HOST_WIDE_INT type to avoid UB and
	truncate_int_for_mode the result for the destination's mode.

	PR c/84909
	* hsa-gen.c (mem_type_for_type): Fix comment typo.
	* tree-vect-loop-manip.c (vect_create_cond_for_niters_checks):
	Likewise.
	* gimple-ssa-warn-restrict.c (builtin_memref::set_base_and_offset):
	Likewise.

2018-03-16  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/84876
	* lra-assigns.c (lra_split_hard_reg_for): Don't use
	regno_allocno_class_array and sorted_pseudos.
	* lra-constraints.c (spill_hard_reg_in_range): Ignore hard regs in
	insns where regno is used.

2018-03-16  Martin Liska  <mliska@suse.cz>

	PR ipa/84833
	* multiple_target.c (create_dispatcher_calls): Redirect
	reference in the symbol table.

2018-03-16  Martin Liska  <mliska@suse.cz>

	PR ipa/84722
	* multiple_target.c (create_dispatcher_calls): Redirect also
	an alias.

2018-03-16  Jakub Jelinek  <jakub@redhat.com>

	PR c++/79937
	PR c++/82410
	* tree.h (TARGET_EXPR_NO_ELIDE): Define.
	* gimplify.c (gimplify_modify_expr_rhs): Don't elide TARGET_EXPRs with
	TARGET_EXPR_NO_ELIDE flag set unless *expr_p is INIT_EXPR.

2018-03-16  Julia Koval  <julia.koval@intel.com>

	* doc/invoke.texi (Skylake Server): Add CLWB.
	Cannonlake): Remove CLWB.

2018-03-16  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84841
	* tree-ssa-reassoc.c (INTEGER_CONST_TYPE): Change to 1 << 4 from
	1 << 3.
	(FLOAT_ONE_CONST_TYPE): Define.
	(constant_type): Return FLOAT_ONE_CONST_TYPE for -1.0 and 1.0.
	(sort_by_operand_rank): Put entries with higher constant_type last
	rather than first to match comments.

2018-03-15  Sandra Loosemore  <sandra@codesourcery.com>

	* config/nios2/nios2.md (movsi_internal): Fix thinko in 
	split predicate.

2018-03-15  Jakub Jelinek  <jakub@redhat.com>

	PR c++/79085
	* calls.c (expand_call): For TREE_ADDRESSABLE rettype ignore alignment
	check and use address of target always.

2018-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84574
	* config/i386/i386.c (indirect_thunk_needed): Update comments.
	(indirect_thunk_bnd_needed): Likewise.
	(indirect_thunks_used): Likewise.
	(indirect_thunks_bnd_used): Likewise.
	(indirect_return_needed): New.
	(indirect_return_bnd_needed): Likewise.
	(output_indirect_thunk_function): Add a bool argument for
	function return.
	(output_indirect_thunk_function): Don't generate alias for
	function return thunk.
	(ix86_code_end): Call output_indirect_thunk_function to generate
	function return thunks.
	(ix86_output_function_return): Set indirect_return_bnd_needed
	and indirect_return_needed instead of indirect_thunk_bnd_needed
	and indirect_thunk_needed.

2018-03-15  Olga Makhotina  <olga.makhotina@intel.com>

	* config/i386/sgxintrin.h (_enclv_u32): New intrinsic.
	(__enclv_bc, __enclv_cd, __enclv_generic): New definitions.
	(ERDINFO, ETRACKC, ELDBC, ELDUC): New leaves.

2018-03-15  David Malcolm  <dmalcolm@redhat.com>
	    Paul Hua <paul.hua.gm@gmail.com>

	PR c/84852
	* gcc.dg/fixits-pr84852-1.c: Fix filename in dg-regexp.

2018-03-15  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (abi_v4_pass_in_fpr): Add back the
	TARGET_DOUBLE_FLOAT and TARGET_SINGLE_FLOAT conditions on the DFmode
	resp. SFmode cases.

2018-03-15  Tamar Christina  <tamar.christina@arm.com>

	PR target/84711
	* config/arm/arm.c (arm_can_change_mode_class): Use GET_MODE_UNIT_SIZE
	instead of GET_MODE_SIZE when comparing Units.

2018-03-15  Vladimir Mezentsev  <vladimir.mezentsev@oracle.com>

	PR target/68256
	* varasm.c (hash_section): Return an unchangeble hash value
	* config/aarch64/aarch64.c (aarch64_use_blocks_for_constant_p):
	Return !aarch64_can_use_per_function_literal_pools_p ().

2018-03-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/84860
	* optabs.c (emit_conditional_move): Pass address of cmode's copy
	rather than address of cmode as last argument to prepare_cmp_insn.

2018-03-15  Julia Koval  <julia.koval@intel.com>

	* config/i386/i386.c (F_AVX512VBMI2, F_GFNI, F_VPCLMULQDQ,
	F_AVX512VNNI, F_AVX512BITALG): New.

2018-03-14  John David Anglin  <danglin@gcc.gnu.org>

	PR target/83451
	* config/pa/pa.c (pa_emit_move_sequence):  Always emit secondary reload
	insn for floating-point loads and stores.

2018-03-14  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-c.c: Add macro definitions for
	ALTIVEC_BUILTIN_VEC_PERMXOR.
	* config/rs6000/rs6000.h: Add #define for vec_permxor builtin.
	* config/rs6000/rs6000-builtin.def: Add macro expansions for VPERMXOR.
	* config/rs6000/altivec.md (altivec_vpermxor): New define expand.
	* config/rs6000/rs6000-p8swap.c (rtx_is_swappable_p): Add case
	UNSPEC_VPERMXOR.
	* config/doc/extend.texi: Add prototypes for vec_permxor.

2018-03-14  David Malcolm  <dmalcolm@redhat.com>

	PR c/84852
	* diagnostic-show-locus.c (class layout_point): Convert m_line
	from int to linenum_type.
	(line_span::comparator): Use linenum "compare" function when
	comparing line numbers.
	(test_line_span): New function.
	(layout_range::contains_point): Convert param "row" from int to
	linenum_type.
	(layout_range::intersects_line_p): Likewise.
	(layout::will_show_line_p): Likewise.
	(layout::print_source_line): Likewise.
	(layout::should_print_annotation_line_p): Likewise.
	(layout::print_annotation_line): Likewise.
	(layout::print_leading_fixits): Likewise.
	(layout::annotation_line_showed_range_p): Likewise.
	(struct line_corrections): Likewise for field m_row.
	(line_corrections::line_corrections): Likewise for param "row".
	(layout::print_trailing_fixits): Likewise.
	(layout::get_state_at_point): Likewise.
	(layout::get_x_bound_for_row): Likewise.
	(layout::print_line): Likewise.
	(diagnostic_show_locus): Likewise for locals "last_line" and
	"row".
	(selftest::diagnostic_show_locus_c_tests): Call test_line_span.
	* input.c (selftest::test_linenum_comparisons): New function.
	(selftest::input_c_tests): Call it.
	* selftest.c (selftest::test_assertions): Test ASSERT_GT,
	ASSERT_GT_AT, ASSERT_LT, and ASSERT_LT_AT.
	* selftest.h (ASSERT_GT): New macro.
	(ASSERT_GT_AT): New macro.
	(ASSERT_LT): New macro.
	(ASSERT_LT_AT): New macro.

2018-03-14  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/84780
	* combine.c (distribute_links): Don't make a link based on pc_rtx.

2018-03-14  Martin Liska  <mliska@suse.cz>

	* tree.c (record_node_allocation_statistics): Use
	get_stats_node_kind.
	(get_stats_node_kind): New function extracted from
	record_node_allocation_statistics.
	(free_node): Use get_stats_node_kind.

2018-03-14  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (compute_antic_aux): Remove code that asserts
	that the value-set of ANTIC_IN doesn't grow.

	Revert
	* tree-ssa-pre.c (struct bb_bitmap_sets): Add visited_with_visited_succs
	member.
	(BB_VISITED_WITH_VISITED_SUCCS): New define.
	(compute_antic): Initialize BB_VISITED_WITH_VISITED_SUCCS.

2018-03-14  Julia Koval  <julia.koval@intel.com>

	* config.gcc (icelake-client, icelake-server): New.
	(icelake): Remove.
	* config/i386/i386.c (initial_ix86_tune_features): Extend to 64 bit.
	(initial_ix86_arch_features): Ditto.
	(PTA_SKYLAKE): Add SGX.
	(PTA_ICELAKE): Remove.
	(PTA_ICELAKE_CLIENT): New.
	(PTA_ICELAKE_SERVER): New.
	(ix86_option_override_internal): Split up icelake on icelake client and
	icelake server.
	(get_builtin_code_for_version): Ditto.
	(fold_builtin_cpu): Ditto.
	* config/i386/driver-i386.c (config/i386/driver-i386.c): Ditto.
	* config/i386/i386-c.c (ix86_target_macros_internal): Ditto
	* config/i386/i386.h (processor_type): Ditto.
	* doc/invoke.texi: Ditto.

2018-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/83392
	* sanopt.c (maybe_optimize_ubsan_ptr_ifn): Handle also
	INTEGER_CST offset, add it together with bitpos / 8 and
	sign extend based on POINTER_SIZE.

	PR target/84844
	Revert
	2017-04-20  Uros Bizjak  <ubizjak@gmail.com>

	PR target/78090
	* config/i386/constraints.md (Yc): New register constraint.
	* config/i386/i386.md (*float<SWI48:mode><MODEF:mode>2_mixed):
	Use Yc constraint for alternative 2 of operand 0.  Remove
	preferred_for_speed attribute.

2018-03-14  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84830
	* tree-ssa-pre.c (compute_antic_aux): Intersect the new ANTIC_IN
	with the old one to avoid oscillations.

2018-03-13  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/83712
	* lra-assigns.c (find_all_spills_for): Ignore uninteresting
	pseudos.
	(assign_by_spills): Return a flag of reload assignment failure.
	Do not process the reload assignment failures.  Do not spill other
	reload pseudos if they has the same reg class.  Update n if
	necessary.
	(lra_assign): Add a return arg.  Set up from the result of
	assign_by_spills call.
	(find_reload_regno_insns, lra_split_hard_reg_for): New functions.
	* lra-constraints.c (split_reg): Add a new arg.  Use it instead of
	usage_insns if it is not NULL.
	(spill_hard_reg_in_range): New function.
	(split_if_necessary, inherit_in_ebb): Pass a new arg to split_reg.
	* lra-int.h (spill_hard_reg_in_range, lra_split_hard_reg_for): New
	function prototypes.
	(lra_assign): Change prototype.
	* lra.c (lra): Add code to deal with fails by splitting hard reg
	live ranges.

2018-03-01  Palmer Dabbelt  <palmer@sifive.com>

	* config/riscv/riscv.opt (mrelax): New option.
	* config/riscv/riscv.c (riscv_file_start): Emit ".option
	"norelax" when riscv_mrelax is disabled.
	* doc/invoke.texi (RISC-V): Document "-mrelax" and "-mno-relax".

2018-03-13  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	PR target/84743
	* config/rs6000/rs6000.c (rs6000_reassociation_width): Disable parallel
	reassociation for int modes.

2018-03-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-loop-manip.c (vect_maybe_permute_loop_masks):
	Reverse the choice between VEC_UNPACK_LO_EXPR and VEC_UNPACK_HI_EXPR
	for big-endian.
	* config/aarch64/iterators.md (hi_lanes_optab): New int attribute.
	* config/aarch64/aarch64-sve.md
	(*aarch64_sve_<perm_insn><perm_hilo><mode>): Rename to...
	(aarch64_sve_<perm_insn><perm_hilo><mode>): ...this.
	(*extend<mode><Vwide>2): Rename to...
	(aarch64_sve_extend<mode><Vwide>2): ...this.
	(vec_unpack<su>_<perm_hilo>_<mode>): Turn into a define_expand,
	renaming the old pattern to...
	(aarch64_sve_punpk<perm_hilo>_<mode>): ...this.  Only define
	unsigned packs.
	(vec_unpack<su>_<perm_hilo>_<SVE_BHSI:mode>): Turn into a
	define_expand, renaming the old pattern to...
	(aarch64_sve_<su>unpk<perm_hilo>_<SVE_BHSI:mode>): ...this.
	(*vec_unpacku_<perm_hilo>_<mode>_no_convert): Delete.
	(vec_unpacks_<perm_hilo>_<mode>): Take BYTES_BIG_ENDIAN into
	account when deciding which SVE instruction the optab should use.
	(vec_unpack<su_optab>_float_<perm_hilo>_vnx4si): Likewise.

2018-03-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.md (V4_REGNUM, V8_REGNUM, V12_REGNUM)
	(V20_REGNUM, V24_REGNUM, V28_REGNUM, P1_REGNUM, P2_REGNUM, P3_REGNUM)
	(P4_REGNUM, P5_REGNUM, P6_REGNUM, P8_REGNUM, P9_REGNUM, P10_REGNUM)
	(P11_REGNUM, P12_REGNUM, P13_REGNUM, P14_REGNUM): New define_constants.
	(tlsdesc_small_<mode>): Turn a define_expand and use
	tlsdesc_small_sve_<mode> for SVE.  Rename original define_insn to...
	(tlsdesc_small_advsimd_<mode>): ...this.
	(tlsdesc_small_sve_<mode>): New pattern.

2018-03-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/iterators.md (UNSPEC_SMUL_HIGHPART)
	(UNSPEC_UMUL_HIGHPART): New constants.
	(MUL_HIGHPART): New int iteraor.
	(su): Handle UNSPEC_SMUL_HIGHPART and UNSPEC_UMUL_HIGHPART.
	* config/aarch64/aarch64-sve.md (<su>mul<mode>3_highpart): New
	define_expand.
	(*<su>mul<mode>3_highpart): New define_insn.

2018-03-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR lto/84805
	* ipa-devirt.c (odr_subtypes_equivalent_p): Do not get the ODR type of
	incomplete types.

2018-03-13  Martin Liska  <mliska@suse.cz>

	PR ipa/84658.
	* (sem_item_optimizer::sem_item_optimizer): Initialize new
	vector.
	(sem_item_optimizer::~sem_item_optimizer): Release it.
	(sem_item_optimizer::merge_classes): Register variable aliases.
	(sem_item_optimizer::fixup_pt_set): New function.
	(sem_item_optimizer::fixup_points_to_sets): Likewise.
	* ipa-icf.h: Declare new variables and functions.

2018-03-13  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/84834
	* match.pd ((A & C) != 0 ? D : 0): Use INTEGER_CST@2 instead of
	integer_pow2p@2 and test integer_pow2p in condition.
	(A < 0 ? C : 0): Similarly for @1.

	PR middle-end/84831
	* stmt.c (parse_output_constraint): If the CONSTRAINT_LEN (*p, p)
	characters starting at p contain '\0' character, don't look beyond
	that.

	PR target/84827
	* config/i386/i386.md (round<mode>2): For 387 fancy math, disable
	pattern if -ftrapping-math -fno-fp-int-builtin-inexact.

	PR target/84828
	* reg-stack.c (change_stack): Change update_end var from int to
	rtx_insn *, if non-NULL don't update just BB_END (current_block), but
	also call set_block_for_insn on the newly added insns and rescan.

	PR target/84786
	* config/i386/sse.md (sse2_loadhpd): Use Yv constraint rather than v
	on the last operand.

	PR c++/84704
	* tree.c (stabilize_reference_1): Return save_expr (e) for
	STATEMENT_LIST even if it doesn't have side-effects.

2018-03-12  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (-mclflushopt): Fix spelling of option.

2018-03-12  Renlin Li  <renlin.li@arm.com>

	* config/aarch64/aarch64.md (movhf_aarch64): Fix mode argument to
	aarch64_output_scalar_simd_mov_immediate.

2018-03-12  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83456
	* gimple-fold.c (gimple_fold_builtin_memory_op): Avoid warning
	for perfectly overlapping calls to memcpy.
	(gimple_fold_builtin_memory_chk): Same.
	(gimple_fold_builtin_strcpy): Handle no-warning.
	(gimple_fold_builtin_stxcpy_chk): Same.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Handle no-warning.

2018-03-12  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (abi_v4_pass_in_fpr): Add bool "named"
	parameter.  Use it for SFmode.
	(rs6000_function_arg_advance_1): Adjust.
	(rs6000_function_arg): Adjust.
	(rs6000_gimplify_va_arg): Pass false for that new parameter.

2018-03-12  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/84169
	PR rtl-optimization/84780
	* combine.c (can_combine_p): Check for a 2-insn combination whether
	the destination register is used between the two insns, too.

2018-03-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84803
	* tree-if-conv.c (ifcvt_memrefs_wont_trap): Don't do anything
	for refs DR analysis didn't process.

2018-03-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84777
	* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): For
	force-vectorize loops ignore whether we are optimizing for size.

2018-03-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_md_asm_adjust): New function.
	(TARGET_MD_ASM_ADJUST): Define.

2018-03-12  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_compute_stack_frame,
	nds32_emit_stack_push_multiple, nds32_emit_stack_pop_multiple,
	nds32_emit_stack_v3push, nds32_emit_stack_v3pop,
	nds32_emit_adjust_frame, nds32_expand_prologue, nds32_expand_epilogue,
	nds32_expand_prologue_v3push, nds32_expand_epilogue_v3pop): Refine.
	* config/nds32/nds32.h (NDS32_FIRST_CALLEE_SAVE_GPR_REGNUM,
	NDS32_LAST_CALLEE_SAVE_GPR_REGNUM, NDS32_V3PUSH_AVAILABLE_P): New.
	* config/nds32/nds32.md (prologue, epilogue): Use macro
	NDS32_V3PUSH_AVAILABLE_P to do checking.

2018-03-11  Jakub Jelinek  <jakub@redhat.com>

	PR debug/58150
	* dwarf2out.c (gen_enumeration_type_die): Don't guard adding
	DW_AT_declaration for ENUM_IS_OPAQUE on -gdwarf-4 or -gno-strict-dwarf,
	but on TYPE_SIZE.  Don't do anything for ENUM_IS_OPAQUE if not creating
	a new die.  Don't set TREE_ASM_WRITTEN if ENUM_IS_OPAQUE.  Guard
	addition of most attributes on !orig_type_die or the attribute not
	being present already.  Assert TYPE_VALUES is NULL for ENUM_IS_OPAQUE.

2018-03-11  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_cpu_cpp_builtins): Modify to define
	__NDS32_VH__ macro.
	* config/nds32/nds32.opt (mvh): New option.

2018-03-11  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-protos.h (nds32_cpu_cpp_builtins): Declare
	function.
	* config/nds32/nds32.c (nds32_cpu_cpp_builtins): New function.
	* config/nds32/nds32.h (TARGET_CPU_CPP_BUILTINS): Modify its
	definition.

2018-03-11  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-memory-manipulation.c (nds32_expand_strlen): New
	function.
	* config/nds32/nds32-multiple.md (strlensi): New pattern.
	* config/nds32/nds32-protos.h (nds32_expand_strlen): Declare function.

2018-03-11  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md (unspec_element): Add UNSPEC_FFB,
	UNSPEC_FFMISM and UNSPEC_FLMISM.
	* config/nds32/nds32-intrinsic.c (bdesc_2arg): Add builtin description
	for ffb, ffmism and flmism.
	* config/nds32/nds32-intrinsic.md (unspec_ffb): Define new pattern.
	(unspec_ffmism): Ditto.
	(unspec_flmism): Ditto.
	(nds32_expand_builtin_impl): Check if string extension is available.
	* config/nds32/nds32.h (nds32_builtins): Add NDS32_BUILTIN_FFB,
	NDS32_BUILTIN_FFMISM and NDS32_BUILTIN_FLMISM.

2018-03-10  Vladimir Makarov  <vmakarov@redhat.com>

	Reverting patch:
	2018-03-09  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/83712
	* lra-assigns.c (assign_by_spills): Return a flag of reload
	assignment failure.  Do not process the reload assignment
	failures.  Do not spill other reload pseudos if they has the same
	reg class.
	(lra_assign): Add a return arg.  Set up from the result of
	assign_by_spills call.
	(find_reload_regno_insns, lra_split_hard_reg_for): New functions.
	* lra-constraints.c (split_reg): Add a new arg.  Use it instead of
	usage_insns if it is not NULL.
	(spill_hard_reg_in_range): New function.
	(split_if_necessary, inherit_in_ebb): Pass a new arg to split_reg.
	* lra-int.h (spill_hard_reg_in_range, lra_split_hard_reg_for): New
	function prototypes.
	(lra_assign): Change prototype.
	* lra.c (lra): Add code to deal with fails by splitting hard reg
	live ranges.

2018-03-10  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84807
	* config/i386/i386.opt: Replace Enforcment with Enforcement.

2018-03-10  Alexandre Oliva  <aoliva@redhat.com>

	PR debug/84620
	* dwarf2out.h (dw_val_class): Add dw_val_class_symview.
	(dw_val_node): Add val_symbolic_view.
	* dwarf2out.c (dw_line_info_table): Add symviews_since_reset.
	(symview_upper_bound): New.
	(new_line_info_table): Initialize symviews_since_reset.
	(dwarf2out_source_line): Count symviews_since_reset and set
	symview_upper_bound.
	(dw_val_equal_p): Handle symview.
	(add_AT_symview): New.
	(print_dw_val): Handle symview.
	(attr_checksum, attr_checksum_ordered): Likewise.
	(same_dw_val_p, size_of_die): Likewise.
	(value_format, output_die): Likewise.
	(add_high_low_attributes): Use add_AT_symview for entry_view.
	(dwarf2out_finish): Reset symview_upper_bound, clear
	zero_view_p.

2018-03-09  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83969
	* config/rs6000/rs6000.c (rs6000_offsettable_memref_p): New prototype.
	Add strict argument and use it.
	(rs6000_split_multireg_move): Update for new strict argument.
	(mem_operand_gpr): Disallow all non-offsettable addresses.
	* config/rs6000/rs6000.md (*movdi_internal64): Use YZ constraint.

2018-03-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/84772
	* config/rs6000/rs6000.c (rs6000_gimplify_va_arg): Mark va_arg_tmp
	temporary TREE_ADDRESSABLE before gimplification of BUILT_IN_MEMCPY.
	* config/powerpcspe/powerpcspe.c (rs6000_gimplify_va_arg): Likewise.

	PR c++/84767
	* tree-inline.c (copy_tree_body_r): For INDIRECT_REF of a remapped
	decl, use remap_type if we want to use the type.

2018-03-09  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84526
	* gimple-ssa-warn-restrict.c (builtin_memref::set_base_and_offset):
	Remove dead code.
	(builtin_access::generic_overlap): Be prepared to handle non-array
	base objects.

2018-03-09  Alexandre Oliva  <aoliva@redhat.com>

	PR rtl-optimization/84682
	* lra-constraints.c (process_address_1): Check is_address flag
	for address constraints.
	(process_alt_operands): Likewise.
	* lra.c (lra_set_insn_recog_data): Pass asm operand locs to
	preprocess_constraints.
	* recog.h (preprocess_constraints): Add oploc parameter.
	Adjust callers.
	* recog.c (preprocess_constraints): Test address_operand for
	CT_ADDRESS constraints.

2018-03-09  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/83712
	* lra-assigns.c (assign_by_spills): Return a flag of reload
	assignment failure.  Do not process the reload assignment
	failures.  Do not spill other reload pseudos if they has the same
	reg class.
	(lra_assign): Add a return arg.  Set up from the result of
	assign_by_spills call.
	(find_reload_regno_insns, lra_split_hard_reg_for): New functions.
	* lra-constraints.c (split_reg): Add a new arg.  Use it instead of
	usage_insns if it is not NULL.
	(spill_hard_reg_in_range): New function.
	(split_if_necessary, inherit_in_ebb): Pass a new arg to split_reg.
	* lra-int.h (spill_hard_reg_in_range, lra_split_hard_reg_for): New
	function prototypes.
	(lra_assign): Change prototype.
	* lra.c (lra): Add code to deal with fails by splitting hard reg
	live ranges.

2018-03-09  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/83193
	* common/config/arm/arm-common.c (arm_parse_arch_option_name):
	Accept complain bool parameter.  Only emit errors if it is true.
	(arm_parse_cpu_option_name): Likewise.
	(arm_target_thumb_only): Adjust callers of the above.
	* config/arm/arm-protos.h (arm_parse_cpu_option_name): Adjust
	prototype to take a default true bool parameter.
	(arm_parse_arch_option_name): Likewise.

2018-03-09  David Malcolm  <dmalcolm@redhat.com>
	    Francois-Xavier Coudert  <fxcoudert@gcc.gnu.org>

	PR jit/64089
	PR jit/84288
	* Makefile.in (LD_VERSION_SCRIPT_OPTION, LD_SONAME_OPTION): New.
	* configure: Regenerate.
	* configure.ac ("linker --version-script option"): New.
	("linker soname option"): New.

2018-03-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84775
	* tree-if-conv.c (add_bb_predicate_gimplified_stmts): Delink
	immediate uses of predicate stmts and mark them modified.

	Revert
	PR tree-optimization/84178
	* tree-if-conv.c (combine_blocks): Move insert_gimplified_predicates
	to caller.
	(version_loop_for_if_conversion): Delay update_ssa call.
	(tree_if_conversion): Delay update_ssa until after predicate
	insertion.

2018-03-09  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/84763
	* config/i386/winnt.c (i386_pe_seh_cold_init): Use small pre-allocation
	when the function accesses prior frames.

2018-03-08  Jakub Jelinek  <jakub@redhat.com>

	PR debug/84456
	* dwarf2out.c (dw_loc_list): If list && loc_list->first->next, call
	gen_llsym, otherwise call maybe_gen_llsym.

	PR inline-asm/84742
	* recog.c (asm_operand_ok): Return 0 if multi-character constraint
	has ',' character inside of it.

2018-03-08  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/84748
	* config/aarch64/aarch64.md (*compare_cstore<mode>_insn): Mark pattern
	as clobbering CC_REGNUM.

2018-03-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/84552
	* tree-scalar-evolution.c: Include tree-into-ssa.h.
	(follow_copies_to_constant): Do not follow SSA names registered
	for update.

2018-03-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84178
	* tree-if-conv.c (combine_blocks): Move insert_gimplified_predicates
	to caller.
	(version_loop_for_if_conversion): Delay update_ssa call.
	(tree_if_conversion): Delay update_ssa until after predicate
	insertion.

2018-03-08  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/84178
	* tree-if-conv.c (release_bb_predicate): Remove the
	the assertion that the stmts have NULL use_ops.
	Discard the statements, asserting that they haven't
	yet been added to a BB.

2018-03-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84746
	* tree-ssa-pre.c (find_leader_in_sets): Deal with SET1 being NULL.
	(phi_translate): Pass in destination ANTIC_OUT set.
	(phi_translate_1): Likewise.  For a simplified result lookup
	a leader in ANTIC_OUT and AVAIL_OUT, not the ANTIC_IN sets.
	(phi_translate_set): Adjust.
	(do_pre_regular_insertion): Likewise.
	(do_pre_partial_partial_insertion): Likewise.

2018-03-08  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84735
	* doc/gcov.texi: Document usage of profile files.
	* gcov-io.h: Document changes in the format.

2018-03-08  Alexandre Oliva  <aoliva@redhat.com>

	PR debug/84404
	PR debug/84408
	* dwarf2out.c (struct dw_line_info_table): Update comments for
	view == -1.
	(FORCE_RESET_NEXT_VIEW): New.
	(FORCE_RESETTING_VIEW_P): New.
	(RESETTING_VIEW_P): Check for -1 too.
	(ZERO_VIEW_P): Likewise.
	(new_line_info_table): Force-reset next view.
	(dwarf2out_begin_function): Likewise.
	(dwarf2out_source_line): Simplify zero_view_p initialization.
	Test FORCE_RESETTING_VIEW_P and RESETTING_VIEW_P instead of
	view directly.  Omit view when omitting .loc at line 0.

2018-03-08  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84740
	* tree-switch-conversion.c (process_switch): Call build_constructors
	only if info.phi_count is non-zero.

	PR tree-optimization/84739
	* tree-tailcall.c (find_tail_calls): Check call arguments against
	DECL_ARGUMENTS (current_function_decl) rather than
	DECL_ARGUMENTS (func) when checking for tail recursion.

2018-03-07  Jakub Jelinek  <jakub@redhat.com>

	* doc/contrib.texi: Add entries for Martin Liska, David Malcolm,
	Marek Polacek, extend Vladimir Makarov's, Jonathan Wakely's and
	Volker Reichelt's entry and add entries for people that perform
	GCC fuzzy testing and report numerous bugs.

2018-03-07  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/82411
	* config/rs6000/rs6000.c (rs6000_elf_in_small_data_p): Don't put
	readonly data in sdata, if that is disabled.
	* config/rs6000/sysv4.opt (mreadonly-in-sdata): New option.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Document
	-mreadonly-in-sdata option.

2018-03-07  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84468
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Consider successor
	basic block when looking for nul assignment.

2018-03-07  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/84277
	* except.h (output_function_exception_table): Adjust prototype.
	* except.c (output_function_exception_table): Remove FNNAME parameter
	and add SECTION parameter.  Ouput one part of the table at a time.
	* final.c (final_scan_insn_1) <NOTE_INSN_SWITCH_TEXT_SECTIONS>: Output
	the first part of the exception table and emit unwind directives.
	* config/i386/i386-protos.h (i386_pe_end_cold_function): Declare.
	(i386_pe_seh_cold_init): Likewise.
	* config/i386/cygming.h (ASM_DECLARE_COLD_FUNCTION_NAME): New macro.
	(ASM_DECLARE_COLD_FUNCTION_SIZE): Likewise.
	* config/i386/i386.c (x86_expand_epilogue): Fix wording in comment.
	(ix86_output_call_insn): Emit a nop in one more case for SEH.
	* config/i386/winnt.c: Include except.h.
	(struct seh_frame_state): Add reg_offset, after_prologue and
	in_cold_section fields.
	(i386_pe_seh_end_prologue): Set seh->after_prologue.
	(i386_pe_seh_cold_init): New function.
	(i386_pe_seh_fini): Add COLD parameter and bail out if it is not equal
	to seh->in_cold_section.
	(seh_emit_push): Record the offset of the push.
	(seh_emit_save): Record the offet of the save.
	(i386_pe_seh_unwind_emit): Deal with NOTE_INSN_SWITCH_TEXT_SECTIONS.
	Test seh->after_prologue to disregard the epilogue.
	(i386_pe_end_function): Pass FALSE to i386_pe_seh_fini.
	(i386_pe_end_cold_function): New function.

2018-03-07  Jakub Jelinek  <jakub@redhat.com>

	PR fortran/84565
	* config/aarch64/predicates.md (aarch64_simd_reg_or_zero): Use
	aarch64_simd_or_scalar_imm_zero rather than aarch64_simd_imm_zero.

	PR c++/84704
	* gimple-expr.c (create_tmp_var_raw): Set DECL_NAMELESS flag
	on tmp_var.
	* tree-pretty-print.c (dump_decl_name): For TDF_COMPARE_DEBUG,
	don't print names of DECL_NAMELESS DECL_IGNORED_P decls.

	PR middle-end/84723
	* multiple_target.c: Include tree-inline.h and intl.h.
	(expand_target_clones): Diagnose and fail if node->definition and
	!tree_versionable_function_p (node->decl).

2018-03-06  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.h (ASM_GENERATE_INTERNAL_LABEL): Revise to use
	sprint_ul.
	(ASM_OUTPUT_ADDR_VEC_ELT): Revise for above change.
	(ASM_OUTPUT_ADDR_DIFF_ELT): Likewise.
	* config/pa/pa64-hpux.h (ASM_GENERATE_INTERNAL_LABEL): Revise as above.

2018-03-06  Jakub Jelinek  <jakub@redhat.com>

	PR target/84710
	* combine.c (try_combine): Use reg_or_subregno instead of handling
	just paradoxical SUBREGs and REGs.

2018-03-06  Claudiu Zissulescu  <claziss@synopsys.com>

	 * config/arc/arc.c (arc_finalize_pic): Remove function.
	 (arc_must_save_register): We use single base PIC register, remove
	 checks to save/restore the PIC register.
	 (arc_expand_prologue): Likewise.
	 * config/arc/arc-protos.h (arc_set_default_type_attributes):
	 Remove.
	 (arc_verify_short): Likewise.
	 (arc_attr_type): Likewise.
	 * config/arc/arc.c (arc_set_default_type_attributes): Remove.
	 (walk_stores): Likewise.
	 (arc_address_cost): Make it static.
	 (arc_verify_short): Likewise.
	 (branch_dest): Likewise.
	 (arc_attr_type): Likewise.
	 * config/arc/arc.c (TARGET_ADJUST_INSN_LENGTH): Remove.
	 (TARGET_INSN_LENGTH_PARAMETERS): Likewise.
	 (arc_final_prescan_insn): Remove inserting the nops due to
	 hardware hazards.  It is done in reorg step.
	 (insn_length_variant_t): Remove.
	 (insn_length_parameters_t): Likewise.
	 (arc_insn_length_parameters): Likewise.
	 (arc_get_insn_variants): Likewise.
	 * config/arc/arc.h (TARGET_UPSIZE_DBR): Remove.

2018-03-06  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/84683
	* reg-stack.c (move_for_stack_reg): If any_malformed_asm, avoid
	assertion failure.

	PR tree-optimization/84687
	* omp-simd-clone.c (simd_clone_create): Clear DECL_BUILT_IN_CLASS
	on new_node->decl.
	* match.pd (pow(C,x)*expN(y) -> expN(logN(C)*x+y)): New optimization.

2018-03-05  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000-builtin.def (rs6000_speculation_barrier):
	Rename to ppc_speculation_barrier.
	* config/rs6000/rs6000.c (rs6000_init_builtins): Rename builtin to
	__builtin_ppc_speculation_barrier.

2018-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/84700
	* combine.c (combine_simplify_rtx): Don't try to simplify if
	if_then_else_cond returned non-NULL, but either true_rtx or false_rtx
	are equal to x.

2018-03-05  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_loop_align): Don't align tiny loops
	to 32 bytes when compiling for POWER9.

2018-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/84564
	* config/i386/i386.c (ix86_function_ok_for_sibcall): Check for
	regparm >= 3 with no arg reg available also for calls with
	flag_force_indirect_call.  Pass decl to ix86_function_regparm.

	PR target/84524
	* config/i386/sse.md (*<code><mode>3): Replace <mask_prefix3> with
	orig,vex.
	(*<plusminus_insn><mode>3): Likewise.  Remove <mask_operand3> uses.

2018-03-05  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/84264
	* config/rs6000/vector.md (mov<mode>): Disallow altivec memory operands.

2018-03-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84486
	* tree-ssa-pre.c (create_expression_by_pieces): Remove dead code.
	When inserting a __builtin_assume_aligned call set the LHS
	SSA name alignment info accordingly.

2018-03-05  Wilco Dijkstra  <wdijkstr@arm.com>

	PR tree-optimization/84114
	* config/aarch64/aarch64.c (aarch64_reassociation_width)
	Avoid reassociation of FLOAT_MODE addition.

2018-03-05  Olga Makhotina  <olga.makhotina@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA_PCONFIG_SET,
	OPTION_MASK_ISA_PCONFIG_UNSET, OPTION_MASK_ISA_WBNOINVD_SET,
	OPTION_MASK_ISA_WBNOINVD_UNSET): New definitions.
	(ix86_handle_option): Handle -mpconfig and -mwbnoinvd.
	* config.gcc (pconfigintrin.h, wbnoinvdintrin.h) : Add headers.
	* config/i386/cpuid.h (bit_PCONFIG, bit_WBNOINVD): New.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect -mpconfig
	and -mwbnoinvd.
	* config/i386/i386-builtin.def (__builtin_ia32_wbnoinvd,
	__builtin_ia32_wbinvd): New builtins.
	(SPECIAL_ARGS2): New.
	* config/i386/i386-c.c (__WBNOINVD__, __PCONFIG__): New.
	(SPECIAL_ARGS2): New.
	* config/i386/i386.c (ix86_target_string): Add -mpconfig and -mwbnoinvd.
	(ix86_valid_target_attribute_inner_p): Ditto.
	(ix86_init_mmx_sse_builtins): Add special_args2.
	* config/i386/i386.h (TARGET_PCONFIG, TARGET_PCONFIG_P, TARGET_WBNOINVD,
	TARGET_WBNOINVD_P): New.
	* config/i386/i386.md (UNSPECV_WBINVD, UNSPECV_WBNOINVD): New.
	(define_insn "wbinvd", define_insn "wbnoinvd"): New.
	* config/i386/i386.opt: Add -mpconfig and -mwbnoinvd.
	* config/i386/immintrin.h (_wbinvd): New intrinsic.
	* config/i386/pconfigintrin.h: New file.
	* config/i386/wbnoinvdintrin.h: Ditto.
	* config/i386/x86intrin.h: Add headers pconfigintrin.h and wbnoinvdintrin.h.
	* doc/invoke.texi (-mpconfig, -mwbnoinvd): New.

2018-03-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84670
	* tree-ssa-pre.c (struct bb_bitmap_sets): Add visited_with_visited_succs
	member.
	(BB_VISITED_WITH_VISITED_SUCCS): New define.
	(compute_antic): Initialize BB_VISITED_WITH_VISITED_SUCCS.
	(compute_antic_aux): Only assert the number of values in ANTIC_IN
	doesn't grow if all successors (recursively) were visited at least
	once.

2018-03-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84650
	* tree-ssa-loop-im.c (pass_lim::execute): Reset the SCEV cache
	if executed in the loop pipeline.

2018-03-05  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/configfiles.texi (Configuration Files): Move info about
	conditionalizing $target-protos.h to...
	* doc/sourcebuild.texi (Back End): Here.  Explain how $target.h
	differs from $target-protos.h.

2018-03-05  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-protos.h (nds32_expand_setmem): Declare.
	* config/nds32/nds32-multiple.md (setmemsi): Define.
	* config/nds32/nds32-memory-manipulation.c
	(nds32_gen_dup_4_byte_to_word_value): New.
	(emit_setmem_word_loop): New.
	(emit_setmem_byte_loop): New.
	(nds32_expand_setmem_loop): New.
	(nds32_expand_setmem_loop_v3m): New.
	(nds32_expand_setmem_unroll): New.
	(nds32_expand_setmem): New.

2018-03-04  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-memory-manipulation.c
	(nds32_emit_load_store): New.
	(nds32_emit_post_inc_load_store): New.
	(nds32_emit_mem_move): New.
	(nds32_emit_mem_move_block): New.
	(nds32_expand_movmemsi_loop_unknown_size): New.
	(nds32_expand_movmemsi_loop_known_size): New.
	(nds32_expand_movmemsi_loop): New.
	(nds32_expand_movmemsi_unroll): New.
	(nds32_expand_movmemqi): Rename ...
	(nds32_expand_movmemsi): ... to this.
	* config/nds32/nds32-multiple.md (movmemqi): Rename ...
	(movmemsi): ... to this.
	* config/nds32/nds32-protos.h (nds32_expand_movmemqi): Rename ...
	(nds32_expand_movmemsi): ... to this.

2018-03-04  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-protos.h
	(nds32_expand_load_multiple): New arguments.
	(nds32_expand_store_multiple): Ditto.
	(nds32_valid_multiple_load_store): Rename ...
	(nds32_valid_multiple_load_store_p): ... to this.
	* config/nds32/nds32-memory-manipulation.c
	(nds32_expand_load_multiple): Refine implementation.
	(nds32_expand_store_multiple): Ditto.
	* config/nds32/nds32-multiple.md
	(load_multiple): Update nds32_expand_load_multiple interface.
	(store_multiple): Update nds32_expand_store_multiple interface.
	* config/nds32/nds32-predicates.c
	(nds32_valid_multiple_load_store): Rename ...
	(nds32_valid_multiple_load_store_p): ... to this and refine
	implementation.
	* config/nds32/predicates.md
	(nds32_load_multiple_and_update_address_operation): New predicate.
	(nds32_store_multiple_and_update_address_operation): New predicate.

2018-03-04  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (type): Add load_multiple and store_multiple.
	(combo): New attribute.
	* config/nds32/nds32-multiple.md: Refine patterns with new attributes.

2018-03-03  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.opt: Change -mcmodel= default value.

2018-03-03  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md (unspec_element): New enum.
	* config/nds32/constraints.md (Umw): New constraint.
	* config/nds32/nds32-intrinsic.c: Add more builtin functions.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32-md-auxiliary.c (nds32_regno_to_enable4): New.
	(nds32_valid_smw_lwm_base_p): New.
	(nds32_output_smw_single_word): New.
	(nds32_output_lmw_single_word): New.
	(nds32_expand_unaligned_load): New.
	(nds32_expand_unaligned_store): New.
	* config/nds32/nds32-protos.h (nds32_valid_smw_lwm_base_p): Declare.
	(nds32_output_smw_single_word): Declare.
	(nds32_output_lmw_single_word): Declare.
	(nds32_expand_unaligned_load): Declare.
	(nds32_expand_unaligned_store): Declare.
	* config/nds32/nds32.h (nds32_builtins): Add NDS32_BUILTIN_UALOAD_HW,
	NDS32_BUILTIN_UALOAD_W, NDS32_BUILTIN_UALOAD_DW,
	NDS32_BUILTIN_UASTORE_HW, NDS32_BUILTIN_UASTORE_W,
	NDS32_BUILTIN_UASTORE_DW.
	* config/nds32/predicates.md (nds32_lmw_smw_base_operand): New
	predicate.

2018-03-03  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-intrinsic.c
	(nds32_expand_builtin_null_ftype_reg): Delete.
	(nds32_expand_builtin_reg_ftype_imm): Ditto.
	(nds32_expand_builtin_null_ftype_reg_imm): Ditto.
	(nds32_read_argument): New.
	(nds32_legitimize_target): Ditto.
	(nds32_legitimize_argument): Ditto.
	(nds32_check_constant_argument): Ditto.
	(nds32_expand_unop_builtin): Ditto.
	(nds32_expand_unopimm_builtin): Ditto.
	(nds32_expand_binop_builtin): Ditto.
	(nds32_builtin_decl_impl): Ditto.
	(builtin_description): Ditto.
	(nds32_expand_builtin_impl): Rewrite with new infrastructure.
	(nds32_init_builtins_impl): Ditto.
	* config/nds32/nds32.c (TARGET_BUILTIN_DECL): Define.
	(nds32_builtin_decl): New.
	* config/nds32/nds32.h (nds32_builtins): Add NDS32_BUILTIN_COUNT.
	* config/nds32/nds32-protos.h (nds32_builtin_decl_impl): Declare.

2018-03-02  Jeff Law  <law@redhat.com>

	* reorg.c (stop_search_p): Handle DEBUG_INSN.
	(redundant_insn, fill_simple_delay_slots): Likewise.
	(fill_slots_from_thread): Likewise.
	* resource.c (mark_referenced_resources): Likewise.
	(mark_set_resources, find_dead_or_set_registers): Likewise.

2018-03-02  Jakub Jelinek  <jakub@redhat.com>

	* substring-locations.h (format_warning_va): Formatting fix for
	ATTRIBUTE_GCC_DIAG.
	(format_warning_at_substring): Fix up ATTRIBUTE_GCC_DIAG second
	argument.
	(format_warning_n_va, format_warning_at_substring_n): New prototypes.
	* substring-locations.c: Include intl.h.
	(format_warning_va): Turned into small wrapper around
	format_warning_n_va, renamed to ...
	(format_warning_n_va): ... this, add N and PLURAL_GMSGID arguments,
	rename GMSGID to SINGULAR_GMSGID, if SINGULAR_GMSGID != PLURAL_GMSGID,
	use ngettext.
	(format_warning_at_substring_n): New function.
	* gimple-ssa-sprintf.c: Remove GCC diagnostic ignored pragma.
	(fmtwarn): Add ATTRIBUTE_GCC_DIAG.  Turn into a copy of
	format_warning_at_substring with just a shorter name instead of
	const function pointer.
	(fmtwarn_n): New function.
	(maybe_warn, format_directive, parse_directive): Use fmtwarn_n where
	appropriate, get rid of all the fmtstr temporaries, move conditionals
	with G_() wrapped string literals directly into fmtwarn arguments,
	cast dir.len to (int), formatting fixes.

2018-03-02  Thomas Schwinge  <thomas@codesourcery.com>

	* doc/invoke.texi: Remove "Cilk Plus" references.

2018-03-02  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenther@suse.de>

	PR ipa/84628
	* expr.c (expand_expr_real_1) <case CALL_EXPR>: Don't emit diagnostics
	for error or warning attributes if CALL_FROM_THUNK_P is set.
	Formatting fixes.

2018-03-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/56540
	* config/pa/pa.h (TARGET_CPU_CPP_BUILTINS): Predefine
	__SIZEOF_128__ macro if HPUX_LONG_DOUBLE_LIBRARY.

	PR target/56540
	* config/ia64/ia64.h (TARGET_CPU_CPP_BUILTINS): Predefine
	__SIZEOF_{FPREG,FLOAT{80,128}}__ macros.

	* predict.c (test_prediction_value_range): Use PROB_UNINITIALIZED
	instead of -1U in last predictors element's probability member.

2018-03-02  Eric Botcazou  <ebotcazou@adacore.com>

	PR ipa/83983
	* ipa-devirt.c (odr_subtypes_equivalent_p): Get the ODR type of both
	arguments if they are comparable.

2018-03-02  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84634
	* tree-vect-stmts.c (vectorizable_store, vectorizable_load): Replace
	masks and masked_loop_p with a single loop_masks, making sure it's
	null for bb vectorization.

2018-03-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-data-refs.c (vect_analyze_data_ref_dependence)
	(vect_analyze_data_ref_access): Use loop->safe_len rather than
	loop->force_vectorize to check whether there is no alias.

2018-03-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/84614
	* rtl.h (prev_real_nondebug_insn, next_real_nondebug_insn): New
	prototypes.
	* emit-rtl.c (next_real_insn, prev_real_insn): Fix up function
	comments.
	(next_real_nondebug_insn, prev_real_nondebug_insn): New functions.
	* cfgcleanup.c (try_head_merge_bb): Use prev_real_nondebug_insn
	instead of a loop around prev_real_insn.
	* combine.c (move_deaths): Use prev_real_nondebug_insn instead of
	prev_real_insn.

	PR inline-asm/84625
	* config/i386/i386.c (ix86_print_operand): Use conditional
	output_operand_lossage instead of gcc_assert if CONST_VECTOR is not
	zero vector.

2018-03-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84427
	* tree-ssa-pre.c (bitmap_remove_expr_from_set): Remove.
	(bitmap_set_subtract_values): Rewrite to handle multiple
	exprs per value.
	(clean): Likewise.
	(prune_clobbered_mems): Likewise.
	(phi_translate): Take edge instead of pred/phiblock.
	(phi_translate_1): Likewise.
	(phi_translate_set): Likewise.  Insert all translated
	exprs for a value into the set, keeping possibly multiple
	expressions per value.
	(compute_antic_aux): Adjust for phi_translate changes.
	When intersecting union the expressions and prune those
	not in the final value set, keeping possibly multiple
	expressions per value.  Do not use value-insertion
	for unioning ANTIC_OUT U EXP_GEN - TMP_GEN but merge
	all expressions.  Add verification that the value-sets
	only shrink during iteration.
	(compute_partial_antic_aux): Adjust for the phi_translate changes.
	(do_pre_regular_insertion): Likewise.
	(do_pre_partial_partial_insertion): Likewise.

2018-03-02  Richard Biener  <rguenther@suse.de>

	PR target/82005
	* config/darwin.c (saved_debug_info_level): New static global.
	(darwin_asm_lto_start): Disable debug info generation for LTO out.
	(darwin_asm_lto_end): Restore debug info generation settings.

2018-03-01  Martin Liska  <mliska@suse.cz>

	PR sanitizer/82484
	* sanopt.c (sanitize_rewrite_addressable_params): Do not handle
	volatile arguments.

2018-03-01  Richard Biener  <rguenther@suse.de>

	PR debug/84645
	* dwarf2out.c (gen_variable_die): Properly handle late VLA
	type annotation with LTO when debug was disabled at compile-time.

2018-03-01  Matthew Fortune  <mfortune@gmail.com>

	* config/mips/mips.c (mips_final_prescan_insn): Fix incorrect
	XINT with INTVAL.
	(mips_final_postscan_insn): Likewise.

2018-03-01  Richard Sandiford  <richard.sandiford@linaro.org>

	PR rtl-optimization/84528
	* alias.c (init_alias_target): Add commentary.
	(init_alias_analysis): Only give HARD_FRAME_POINTER_REGNUM
	a unique base value if the frame pointer is not eliminated
	to the stack pointer.

2018-03-01  Tom de Vries  <tom@codesourcery.com>

	PR rtl-optimization/83327
	* lra-int.h (hard_regs_spilled_into): Declare.
	* lra.c (hard_regs_spilled_into): Define.
	(init_reg_info): Init hard_regs_spilled_into.
	* lra-spills.c (assign_spill_hard_regs): Update hard_regs_spilled_into.
	* lra-lives.c (make_hard_regno_born, make_hard_regno_dead)
	(process_bb_lives): Handle hard_regs_spilled_into.
	(lra_create_live_ranges_1): Before doing liveness propagation, clear
	regs in all_hard_regs_bitmap if set in hard_regs_spilled_into.

2018-02-28  David Edelsohn  <dje.gcc@gmail.com>

	* config.gcc (powerpc-ibm-aix7.1.*): New stanza.
	(powerpc-ibm-aix[789]*): Default to AIX 7.2.
	* config/rs6000/aix71.h (TARGET_DEFAULT): Revert to Power4 ISA.
	* config/rs6000/aix72.h: New file.

2018-02-28  Jakub Jelinek  <jakub@redhat.com>

	* gimple-ssa-warn-restrict.c (maybe_diag_overlap): Use warning_n
	instead of warning_at with conditional singular and plural messages
	where possible.

	PR target/52991
	* stor-layout.c (update_alignment_for_field): For
	targetm.ms_bitfield_layout_p (rli->t), if !is_bitfield
	&& !DECL_PACKED (field), do the alignment update, just use
	only desired_align instead of MAX (type_align, desired_align)
	as the alignment.
	(place_field): Don't do known_align < desired_align handling
	early if targetm.ms_bitfield_layout_p (rli->t) and rli->prev_field
	is non-NULL, instead do it after rli->prev_field handling and
	only if not within a bitfield word.  For DECL_PACKED (field)
	use type_align of BITS_PER_UNIT.

2018-02-28  Eric Botcazou  <ebotcazou@adacore.com>

	* config/aarch64/aarch64.c (aarch64_emit_probe_stack_range): Remove
	superfluous parentheses and trailing spaces.

2018-02-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84584
	* graphite-scop-detection.c (scop_detection::add_scop): Discard
	SCoPs with fake exit edge.

2018-02-28  Martin Liska  <mliska@suse.cz>

	PR testsuite/84597
	* timevar.c (timer::print): Fix format to properly print 100%
	values.

2018-02-28  Richard Biener  <rguenther@suse.de>

	PR middle-end/84607
	* genmatch.c (capture_info::walk_match): Do not mark
	captured expressions without operands as expr_p given
	they act more like predicates and should be subject to
	"lost tail" side-effect preserving.

2018-02-28  Alexandre Oliva  <aoliva@redhat.com>

	PR rtl-optimization/81611
	* auto-inc-dec.c (attempt_change): Move dead note from
	mem_insn if it's the next use of regno
	(find_address): Take address use of reg holding
	non-incremented value.  Add parm to limit search to the named
	reg only.
	(merge_in_block): Attempt to use a mem insn that is the next
	use of the original regno.

2018-02-27  Martin Sebor  <msebor@redhat.com>

	PR c++/83871
	* gcc/doc/invoke.texi (-Wmissing-attributes): New option.
	* gcc/print-tree.c (print_node): Handle DECL_UNINLINABLE.

2018-02-27  Martin Sebor  <msebor@redhat.com>

	PR translation/84207
	* diagnostic-core.h (warning_n, error_n, inform_n): Change
	n argument to unsigned HOST_WIDE_INT.
	* diagnostic.c (warning_n, error_n, inform_n): Ditto.
	(diagnostic_n_impl): Ditto.  Handle arguments in excess of LONG_MAX.
	* gimple-ssa-sprintf.c (format_directive): Simplify inform_n call.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Use warning_n.

2018-02-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84512
	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost):
	Do not use the estimate returned from record_stmt_cost for
	the scalar iteration cost but sum properly using add_stmt_cost.

2018-02-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84466
	* graphite-scop-detection.c (scop_detection::stmt_simple_for_scop_p):
	Adjust last change to less strictly validate use operands.

2018-02-27  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84548
	* gcov.c (process_file): Allow partial overlap and consider it
	also as group functions.
	(output_lines): Properly calculate range of lines for a group.

2018-02-27  Martin Liska  <mliska@suse.cz>

	* timevar.c (timer::print_row): Remove 'usr', 'sys', 'wall' and
	'ggc' suffixes.  Change first column width.
	(timer::print): Fix formatting of the column.

2018-02-27  Alexandre Oliva  <aoliva@redhat.com>

	* tree-ssa-live.c (remove_unused_scope_block_p): Do not
	preserve inline entry blocks for the sake of debug inline
	entry point markers alone.
	(remove_unused_locals): Suggest in comments a better place to
	force the preservation of inline entry blocks that are
	otherwise unused, but do not preserve them.

2018-02-26  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (ix86_output_indirect_jmp): Update comments.

2018-02-26  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84039
	* config/i386/constraints.md (Bs): Replace
	ix86_indirect_branch_register with
	TARGET_INDIRECT_BRANCH_REGISTER.
	(Bw): Likewise.
	* config/i386/i386.md (indirect_jump): Likewise.
	(tablejump): Likewise.
	(*sibcall_memory): Likewise.
	(*sibcall_value_memory): Likewise.
	Peepholes of indirect call and jump via memory: Likewise.
	(*sibcall_GOT_32): Disallowed for TARGET_INDIRECT_BRANCH_REGISTER.
	(*sibcall_value_GOT_32): Likewise.
	* config/i386/predicates.md (indirect_branch_operand): Likewise.
	(GOT_memory_operand): Likewise.
	(call_insn_operand): Likewise.
	(sibcall_insn_operand): Likewise.
	(GOT32_symbol_operand): Likewise.
	* config/i386/i386.h (TARGET_INDIRECT_BRANCH_REGISTER): New.

2018-02-26  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/83496
	* reorg.c (steal_delay_list_from_target): Change REDUNDANT array from
	booleans to RTXes.  Call fix_reg_dead_note on every non-null element.
	(steal_delay_list_from_fallthrough): Call fix_reg_dead_note on a
	redundant insn, if any.
	(relax_delay_slots): Likewise.
	(update_reg_unused_notes): Rename REDUNDANT_INSN to OTHER_INSN.

2018-02-26  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83965
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Assume
	that grouped statements are part of a reduction chain.  Return
	true if the statement is not marked as a reduction itself but
	is part of a group.
	(vect_recog_dot_prod_pattern): Don't check whether the statement
	is part of a group here.
	(vect_recog_sad_pattern): Likewise.
	(vect_recog_widen_sum_pattern): Likewise.

2018-02-26  Eric Botcazou  <ebotcazou@adacore.com>

	PR debug/84545
	* final.c (rest_of_clean_state): Also look for calls inside sequences.

2018-02-26  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84530
	* config/i386/i386-protos.h (ix86_output_indirect_jmp): Remove
	the bool argument.
	(ix86_output_indirect_function_return): New prototype.
	(ix86_split_simple_return_pop_internal): Likewise.
	* config/i386/i386.c (indirect_return_via_cx): New.
	(indirect_return_via_cx_bnd): Likewise.
	(indirect_thunk_name): Handle return va CX_REG.
	(output_indirect_thunk_function): Create alias for
	__x86_return_thunk_[re]cx and __x86_return_thunk_[re]cx_bnd.
	(ix86_output_indirect_jmp): Remove the bool argument.
	(ix86_output_indirect_function_return): New function.
	(ix86_split_simple_return_pop_internal): Likewise.
	* config/i386/i386.md (*indirect_jump): Don't pass false
	to ix86_output_indirect_jmp.
	(*tablejump_1): Likewise.
	(simple_return_pop_internal): Change it to define_insn_and_split.
	Call ix86_split_simple_return_pop_internal to split it for
	-mfunction-return=.
	(simple_return_indirect_internal): Call
	ix86_output_indirect_function_return instead of
	ix86_output_indirect_jmp.

2018-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/84405
	* vec.h (vec_default_construct): For BROKEN_VALUE_INITIALIZATION use
	memset and value initialization afterwards.

2018-02-26  Christophe Lyon  <christophe.lyon@linaro.org>

	* Makefile.in (lto-wrapper): Use ALL_LINKERFLAGS.

2018-02-26  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        PR target/84521
	* common/config/aarch64/aarch64-common.c
	(aarch_option_optimization_table[]): Switch
	off fomit-frame-pointer

2018-02-26  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-multiple.md (load_multiple): Disallow
	volatile memory.
	(store_multiple): Ditto.

2018-02-26  Kito Cheng  <kito.cheng@gmail.com>

	* config.gcc: Add --with-cpu support for nds32 target.
	* config/nds32/nds32-opts.h (nds32_cpu_type): New.
	* config/nds32/nds32.opt: Add -mcpu= option.

2018-02-25  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.opt (mvrsave=no, mvrsave=yes, isel=no,
	isel=yes): Warn for these deprecated options.

2018-02-23  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/aix71.h (TARGET_DEFAULT): Change to
	ISA_2_5_MASKS_EMBEDDED.

2018-02-23  Jakub Jelinek  <jakub@redhat.com>

	* ipa-prop.c (ipa_vr_ggc_hash_traits::hash): Hash p->min and
	p->max as pointers rather than using iterative_hash_expr.

2018-02-23  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def: Change VSIGNED2 and VUNSIGNED2
	macro expansions from BU_VSX_2 to BU_P8V_VSX_2 and BU_VSX_OVERLOAD_2 to
	BU_P8V_OVERLOAD_2.
	* config/rs6000/rs6000-c.c: Change VSX_BUILTIN_VEC_VSIGNED2 to
	P8V_BUILTIN_VEC_VSIGNED2.  Change VSX_BUILTIN_VEC_VUNSIGNED2 to
	P8V_BUILTIN_VEC_VUNSIGNED2.

2018-02-22  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/81572
	* lra-int.h (LRA_UNKNOWN_ALT, LRA_NON_CLOBBERED_ALT): New macros.
	* lra.c (lra_set_insn_recog_data, lra_update_insn_recog_data): Use
	LRA_UNKNOWN_ALT.
	* lra-constraints.c (curr_insn_transform): Set up
	LRA_NON_CLOBBERED_ALT for moves processed on the fast path.  Use
	LRA_UNKNOWN_ALT.
	(remove_inheritance_pseudos): Use LRA_UNKNOWN_ALT.
	* lra-eliminations.c (spill_pseudos): Ditto.
	(process_insn_for_elimination): Ditto.
	* lra-lives.c (reg_early_clobber_p): Use the new macros.
	* lra-spills.c (spill_pseudos): Use LRA_UNKNOWN_ALT and
	LRA_NON_CLOBBERED_ALT.

2018-02-22  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84480
	* gimple-fold.c (gimple_fold_builtin_strcpy): Move warnings
	to maybe_diag_stxncpy_trunc.  Call it.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Integrate warnings
	from gimple_fold_builtin_strcpy.  Print inlining stack.
	(handle_builtin_stxncpy): Print inlining stack.
	* tree-ssa-strlen.h (maybe_diag_stxncpy_trunc): Declare.

2018-02-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84176
	* config/i386/i386.c (ix86_set_indirect_branch_type): Issue an
	error when -mindirect-branch=thunk-extern, -fcf-protection=branch
	and -fcheck-pointer-bounds are used together.
	(indirect_thunk_prefix): New enum.
	(indirect_thunk_need_prefix): New function.
	(indirect_thunk_name): Replace need_bnd_p with need_prefix.  Use
	"_nt" instead of "_bnd" for NOTRACK prefix.
	(output_indirect_thunk): Replace need_bnd_p with need_prefix.
	(output_indirect_thunk_function): Likewise.
	(): Likewise.
	(ix86_code_end): Update output_indirect_thunk_function calls.
	(ix86_output_indirect_branch_via_reg): Replace
	ix86_bnd_prefixed_insn_p with indirect_thunk_need_prefix.
	(ix86_output_indirect_branch_via_push): Likewise.
	(ix86_output_function_return): Likewise.
	* doc/invoke.texi: Document -mindirect-branch=thunk-extern is
	incompatible with -fcf-protection=branch and
	-fcheck-pointer-bounds.

2018-02-22  Steve Ellcey  <sellcey@cavium.com>

	PR target/83335
	* config/aarch64/aarch64.c (aarch64_print_address_internal):
	Change gcc_assert call to output_operand_lossage.

2018-02-22  Steve Ellcey  <sellcey@cavium.com>

	* doc/extend.texi (__builtin_extend_pointer): Document builtin.

2018-02-22  DJ Delorie  <dj@redhat.com>
	    Sebastian Perta  <sebastian.perta@renesas.com>
	    Oleg Endo  <olegendo@gcc.gnu.org>

	* config/rx/rx.c (rx_rtx_costs): New function.
	(TARGET_RTX_COSTS): Override to use rx_rtx_costs.

2018-02-22  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/t-multilib: Map Armv8-R to Armv7 multilibs.

2018-02-22  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* common/config/arm/arm-common.c (arm_print_hint_for_cpu_option):
	Add "native" as a possible value.

2018-02-22  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* config/i386/i386.c (ix86_option_override_internal):
	Add "native" as a possible value for -march and -mtune.

2018-02-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/84502
	* stor-layout.c (finalize_type_size): Propagate TYPE_EMPTY_P flag
	to all type variants.

	PR tree-optimization/84503
	* gimple-ssa-store-merging.c (merged_store_group::merge_into): Compute
	width as info->bitpos + info->bitsize - start.
	(merged_store_group::merge_overlapping): Simplify width computation.
	(check_no_overlap): New function.
	(imm_store_chain_info::try_coalesce_bswap): Compute expected
	start + width and last_order of the group, fail if check_no_overlap
	fails.
	(imm_store_chain_info::coalesce_immediate_stores): Don't merge info
	to group if check_no_overlap fails.

2018-02-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md: Delete contraint arguments to
	define_expand, define_split, and define_peephole2, and in
	define_insn_and_split if always unused.
	* config/rs6000/darwin.md: Ditto.
	* config/rs6000/dfp.md: Ditto.
	* config/rs6000/rs6000.md: Ditto.
	* config/rs6000/sync.md: Ditto.
	* config/rs6000/vector.md: Ditto.
	* config/rs6000/vsx.md: Ditto.

2018-02-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md: Write output control strings as braced
	blocks instead of double-quoted strings.
	* config/rs6000/darwin.md: Ditto.
	* config/rs6000/rs6000.md: Ditto.
	* config/rs6000/vector.md: Ditto.
	* config/rs6000/vsx.md: Ditto.

2018-02-21  Jason Merrill  <jason@redhat.com>

	PR c++/84314 - ICE with templates and fastcall attribute.
	* attribs.c (build_type_attribute_qual_variant): Remove assert.

2018-02-21  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-cp.c (determine_versionability): Fix comment typos.

2018-02-21  Jan Hubicka  <hubicka@ucw.cz>

	PR c/84229
	* ipa-cp.c (determine_versionability): Do not version functions caling
	va_arg_pack.

2018-02-21  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* config/aarch64/aarch64.c (aarch64_print_hint_for_core_or_arch):
	Add "native" as a possible value.
	* config/aarch64/aarch64.h (HAVE_LOCAL_CPU_DETECT):  Define
	the macro when native cpu detection is available.

2018-02-21  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* common/config/arm/arm-common.c (arm_print_hint_for_arch_option):
	Add "native" as a possible value.
	* config/arm/arm.h (HAVE_LOCAL_CPU_DETECT): Define the macro
	when native cpu detection is available.

2018-02-21  Jakub Jelinek  <jakub@redhat.com>
	    Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84478
	* gimple-fold.h (get_range_strlen): Add a bool argument defaulted to
	false.
	* gimple-fold.c (get_range_strlen): Make minlen const and assume it
	can't be NULL.  Change FUZZY from bool to int, for 1 add PHI/COND_EXPR
	support which is conservatively correct, for 2 only stay conservative
	for maxlen.  Formatting and comment capitalization fixes.  Add STRICT
	argument to the 2 argument get_range_strlen, adjust 6 arg
	get_range_strlen caller and clear minmaxlen[0] and [1] if it returned
	false.
	(get_maxval_strlen): Adjust 6 arg get_range_strlen caller.
	(gimple_fold_builtin_strlen): Pass true as last argument to
	get_range_strlen.

2018-02-20  Martin Sebor  <msebor@redhat.com>

	PR middle-end/84095
	* gimple-ssa-warn-restrict.c (builtin_memref::extend_offset_range): New.
	(builtin_memref::set_base_and_offset): Same.  Handle inner references.
	(builtin_memref::builtin_memref): Factor out parts into
	set_base_and_offset and call it.

2018-02-20  Richard Sandiford  <richard.sandiford@linaro.org>

	PR middle-end/84406
	* optabs-query.c (find_widening_optab_handler_and_mode): If from_mode
	is a scalar_int_mode, assert that to_mode is a scalar_int_mode with
	greater precision.  If to_mode is a MODE_PARTIAL_INT, stop the
	search at the associated MODE_INT.

2018-02-20  Jeff Law  <law@redhat.com>

	PR middle-end/82123
	PR tree-optimization/81592
	PR middle-end/79257
	* gimple-ssa-sprintf.c (format_integer): Query EVRP range analyzer
	for range data rather than using global data.
	* gimple-ssa-sprintf.c (get_int_range): Query EVRP range analyzer for
	range data rather than using global data.
	* gimple-ssa-sprintf.c (get_int_range): Accept vr_values parameter
	pass it to children as needed.
	(struct directive::fmtresult): Similarly.
	(struct directive::set_width): Similarly.
	(struct directive::set_precision): Similarly.
	(format_integer, format_directive, parse_directive): Similarly.
	(format_none): Accept unnamed vr_values parameter.
	(format_percent, format_floating, format_character): Similarly.
	(format_string, format_plain): Similarly.
	* gimple-ssa-sprintf.c (sprintf_dom_walker::handle_gimple_call): Query
	the EVRP range analyzer for range data rather than using global data.
	* gimple-ssa-sprintf.c: Include alloc-pool.h, vr-values.h and 
	gimple-ssa-evrp-analyze.h
	(class sprintf_dom_walker): Add after_dom_children member function.
	Add evrp_range_analyzer member.
	(sprintf_dom_walker::before_dom_children): Call into the EVRP
	range analyzer as needed.
	(sprintf_dom_walker::after_dom_children): New member function.
	* gimple-ssa-evrp-analyze.c (evrp_range_analyzer::enter): Do nothing
	if not optimizing.
	(evrp_range_analyzer::record_ranges_from_stmt): Likewise.
	(evrp_range_analyzer::pop_to_marker): Likewise.

2018-02-20  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84419
	* internal-fn.c (expand_call_mem_ref): Create a TARGET_MEM_REF
	with the required type if its current type is compatible but
	different.

2018-02-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/82004
	* match.pd (pow(C,x) -> exp(log(C)*x)): Delay all folding until
	after vectorization.

2018-02-20  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* config/aarch64/aarch64.c (aarch64_print_hint_for_core_or_arch): Print
	possible values if we don't have a hint.

2018-02-20  Martin Liska  <mliska@suse.cz>

	PR c/84310
	PR target/79747
	* final.c (shorten_branches): Build align_tab array with one
	more element.
	* opts.c (finish_options): Add alignment option limit check.
	(MAX_CODE_ALIGN): Likewise.
	(MAX_CODE_ALIGN_VALUE): Likewise.
	* doc/invoke.texi: Document maximum allowed option value for
	all -falign-* options.

2018-02-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/84146
	* reg-notes.def (REG_CALL_ARG_LOCATION): New reg note.
	* insn-notes.def (NOTE_INSN_CALL_ARG_LOCATION): Remove.
	* var-tracking.c (emit_note_insn_var_location): Remove all references
	to NOTE_INSN_CALL_ARG_LOCATION.
	(emit_notes_in_bb): Emit arguments as REG_CALL_ARG_LOCATION note on
	the CALL_INSN rather than separate NOTE_INSN_CALL_ARG_LOCATION note.
	Use copy_rtx_if_shared.
	* dwarf2out.c (gen_subprogram_die): Use XEXP with 0 instead of
	NOTE_VAR_LOCATION on ca_loc->call_arg_loc_note.
	(dwarf2out_var_location): Remove handling of
	NOTE_INSN_CALL_ARG_LOCATION, instead handle REG_CALL_ARG_LOCATION note
	on call_insn.
	* final.c (final_scan_insn): Remove all references to
	NOTE_INSN_CALL_ARG_LOCATION.
	(rest_of_clean_state): Likewise.  Remove REG_CALL_ARG_LOCATION notes
	before dumping final insns.
	* except.c (emit_note_eh_region_end): Remove all references to
	NOTE_INSN_CALL_ARG_LOCATION.
	* config/alpha/alpha.c (alpha_pad_function_end): Likewise.
	* config/c6x/c6x.c (c6x_gen_bundles): Likewise.
	* config/arc/arc.c (hwloop_optimize): Likewise.
	* config/arm/arm.c (create_fix_barrier): Likewise.
	* config/s390/s390.c (s390_chunkify_start): Likewise.
	* config/sh/sh.c (find_barrier): Likewise.
	* config/i386/i386.c (rest_of_insert_endbranch,
	ix86_seh_fixup_eh_fallthru): Likewise.
	* config/xtensa/xtensa.c (hwloop_optimize): Likewise.
	* config/iq2000/iq2000.c (final_prescan_insn): Likewise.
	* config/frv/frv.c (frv_function_prologue): Likewise.
	* emit-rtl.c (try_split): Likewise.  Copy over REG_CALL_ARG_LOCATION
	reg note.
	(note_outside_basic_block_p): Remove all references to
	NOTE_INSN_CALL_ARG_LOCATION.
	* gengtype.c (adjust_field_rtx_def): Likewise.
	* print-rtl.c (rtx_writer::print_rtx_operand_code_0, print_insn):
	Likewise.
	* jump.c (cleanup_barriers, delete_related_insns): Likewise.
	* cfgrtl.c (force_nonfallthru_and_redirect): Likewise.

	PR c++/84444
	* builtins.c (builtin_mathfn_code): Don't check if CALL_EXPR_FN (t)
	is ADDR_EXPR.

	PR tree-optimization/84452
	* tree-vect-patterns.c (vect_recog_pow_pattern): Don't call
	expand_simd_clones if targetm.simd_clone.compute_vecsize_and_simdlen
	is NULL.

2018-02-19  Martin Liska  <mliska@suse.cz>

	PR sanitizer/82183
	* passes.def: Put pass_sancov_O0 before pass_lower_switch with -O0.

2018-02-19  Martin Liska  <mliska@suse.cz>
	    Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/82491
	* gimple-fold.c (get_base_constructor): Make earlier bail out
	to prevent ubsan.

2018-02-19  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def: Change NEG macro expansions from
	BU_ALTIVEC_A to BU_P8V_AV_1 and BU_ALTIVEC_OVERLOAD_1 to
	BU_P8V_OVERLOAD_1.
	* config/rs6000/rs6000-c.c: Change ALTIVEC_BUILTIN_VEC_NEG to
	P8V_BUILTIN_VEC_NEG.

2018-02-19  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (movdf): New define expand.

2018-02-19  Martin Liska  <mliska@suse.cz>

	PR other/80589
	* doc/invoke.texi: Fix typo.
	* params.def (PARAM_MAX_LOOP_HEADER_INSNS): Likewise.

2018-02-18  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): Don't
	handle rs6000_single_float and rs6000_double_float specially for
	e500 family CPUs.

2018-02-16  Jeff Law  <law@redhat.com>

	* config/rx/rx.c (add_pop_cfi_notes): New function.;
	(pop_regs): Use it.

2018-02-16  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/84425
	* ipa-inline.c (inline_small_functions): Fix a typo.

2018-02-16  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Backwards Compatibility): Americanize 'behaviour'.

2018-02-16  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def: Add BU_P8V_VSX_2 macro definition.
	Change FLOAT2 expansions from BU_VSX_2 to BU_P8V_VSX_2 and
	from BU_VSX_OVERLOAD_2 to BU_P8V_OVERLOAD_2.
	* config/rs6000/rs6000-c.c: Changed macro VSX_BUILTIN_VEC_FLOAT2
	expansion to P8V_BUILTIN_VEC_FLOAT2.

2018-02-16  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/70023
	* lra-constraints.c (inherit_in_ebb): Take hard reg mode of
	src_regno into account.

2018-02-16  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h: Remove vec_vextract4b and vec_vinsert4b.
	* config/rs6000/rs6000-builtin.def: Remove macro expansion for
	VEXTRACT4B, VINSERT4B, VINSERT4B_DI and VEXTRACT4B.
	* config/rs6000/rs6000.c: Remove case statements for
	P9V_BUILTIN_VEXTRACT4B, P9V_BUILTIN_VEC_VEXTRACT4B,
	P9V_BUILTIN_VINSERT4B, P9V_BUILTIN_VINSERT4B_DI,
	and P9V_BUILTIN_VEC_VINSERT4B.
	* config/rs6000/rs6000-c.c (altivec_expand_builtin): Remove entries for
	P9V_BUILTIN_VEC_VEXTRACT4B and P9V_BUILTIN_VEC_VINSERT4B.
	* config/rs6000/vsx.md:
	* doc/extend.texi: Remove vec_vextract4b, non ABI definitions for
	vec_insert4b.

2018-02-16  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h: Add builtin names vec_extract4b
	vec_insert4b.
	* config/rs6000/rs6000-builtin.def: Add INSERT4B and EXTRACT4B
	definitions.
	* config/rs6000/rs6000-c.c: Add the definitions for
	P9V_BUILTIN_VEC_EXTRACT4B and P9V_BUILTIN_VEC_INSERT4B.
	* config/rs6000/rs6000.c (altivec_expand_builtin): Add
	P9V_BUILTIN_EXTRACT4B and P9V_BUILTIN_INSERT4B case statements.
	* config/rs6000/vsx.md: Add define_insn extract4b.  Add define_expand
	definition for insert4b and define insn *insert3b_internal.
	* doc/extend.texi: Add documentation for vec_extract4b.

2018-02-16  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Backwards Compatibility): Mention friend
	injection.  Note for-scope is deprecated.
	* doc/invoke.texi (-ffriend-injection): Deprecate.

2018-02-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* combine.c (try_combine): When adjusting LOG_LINKS for the destination
	that moved to I2, also allow destinations that are a paradoxical
	subreg (instead of a normal reg).

2018-02-16  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/83831
	* config/rx/rx.c (rx_fuse_in_memory_bitop): Convert shift operand
	to QImode.

2018-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84037
	PR tree-optimization/84016
	PR target/82862
	* config/i386/i386.c (ix86_builtin_vectorization_cost):
	Adjust vec_construct for the fact we need additional higher latency
	128bit inserts for AVX256 and AVX512 vector builds.
	(ix86_add_stmt_cost): Scale vector construction cost for
	elementwise loads.

2018-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84417
	* tree-ssa.c (non_rewritable_mem_ref_base): Properly constrain
	the MEM_REF offset when conversion to BIT_FIELD_REF is desired.
	(non_rewritable_lvalue_p): Likewise, use poly-ints.

2018-02-16  Martin Liska  <mliska@suse.cz>

	PR sanitizer/84307
	* internal-fn.def (ASAN_CHECK): Set proper flags.
	(ASAN_MARK): Likewise.

2018-02-16  Julia Koval  <julia.koval@intel.com>

	* config/i386/i386.c (ix86_option_override_internal): Remove PTA_CLWB
	from PTA_CANNONLAKE.

2018-02-16  Jakub Jelinek  <jakub@redhat.com>

	PR target/84272
	* config/aarch64/cortex-a57-fma-steering.c (fma_forest::merge_forest):
	Use ++iter rather than iter++ for std::list iterators.
	(func_fma_steering::dfs): Likewise.  Don't delete nodes right away,
	defer deleting them until all nodes in the forest are processed.  Do
	free even leaf nodes.  Change to_process into auto_vec.

	PR bootstrap/84405
	* system.h (BROKEN_VALUE_INITIALIZATION): Define for GCC < 4.3.
	* vec.h (vec_default_construct): Use memset instead of placement new
	if BROKEN_VALUE_INITIALIZATION is defined.
	* hash-table.h (hash_table<Descriptor, Allocator>::empty_slow): Use
	memset instead of value initialization if BROKEN_VALUE_INITIALIZATION
	is defined.

	PR rtl-optimization/83723
	* lra-int.h (lra_substitute_pseudo): Add DEBUG_P argument.
	* lra.c (lra_substitute_pseudo): Likewise.  If true, use
	gen_rtx_raw_SUBREG instead of gen_rtx_SUBREG.  Pass DEBUG_P to
	recursive calls.
	(lra_substitute_pseudo_within_insn): Adjust lra_substitute_pseudo
	callers.
	* lra-constraints.c (inherit_reload_reg, split_reg): Likewise.

2018-02-16  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/81443
	* rtlanal.c (num_sign_bit_copies1) <SUBREG>: Do not propagate results
	from inner REGs to paradoxical SUBREGs.

2018-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84399
	* graphite-scop-detection.c (scop_detection::stmt_simple_for_scop_p):
	For operands we can analyze at their definition make sure we can
	analyze them at each use as well.

2018-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84190
	* tree-ssa.c (non_rewritable_mem_ref_base): Do not touch
	volatile accesses if the decl isn't volatile.

2018-02-15  Jason Merrill  <jason@redhat.com>

	PR c++/84314 - ICE with templates and fastcall attribute.
	* attribs.c (build_type_attribute_qual_variant): Don't clobber
	TYPE_CANONICAL on an existing type.

2018-02-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84383
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Don't look at
	dstoff nor call operand_equal_p if dstbase is NULL.

	PR tree-optimization/84334
	* match.pd ((A +- CST1) +- CST2 -> A + CST3): If A is
	also a CONSTANT_CLASS_P, punt.

2018-02-14  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_first_stack_step): Move locals after
	first SMALL_OPERAND check.  New local min_second_step.  Move assert
	to where locals are set.  Add TARGET_RVC support.
	* config/riscv/riscv.h (C_SxSP_BITS, SWSP_REACH, SDSP_REACH): New.

2018-02-14  Indu Bhagat  <indu.bhagat@oracle.com>

	* doc/invoke.texi: Correct -Wformat-overflow code sample.

2018-02-14  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83698
	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): For
	arrays constrain the offset range to their bounds.
	(builtin_access::strcat_overlap): Adjust the bounds of overlap offset.
	(builtin_access::overlap): Avoid setting the size of overlap if it's
	already been set.
	(maybe_diag_overlap): Also consider arrays when deciding what values
	of offsets to include in diagnostics.

2018-02-14  Martin Sebor  <msebor@redhat.com>

	PR c/84108
	* attribs.c (diag_attr_exclusions): Consider the exclusion(s)
	that correspond to the kind of a declaration.

2018-02-14  John David Anglin  <danglin@gcc.gnu.org>

	PR target/83984
	* config/pa/pa.md: Load address of PIC label using the linkage table
	if the label is nonlocal.

2018-02-14  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): Issue
	warning message if user requests -maltivec=be.
	* doc/invoke.texi: Document deprecation of -maltivec=be.

2018-02-14  Will Schmidt  <will_schmidt@vnet.ibm.com>

	PR target/84220
	* config/rs6000/rs6000-c.c: Update definitions for
	ALTIVEC_BUILTIN_VEC_SLD, ALTIVEC_BUILTIN_VEC_SLDW,
	VEC_XXSLDWI and ALTIVEC_BUILTIN_VEC_XXPERMDI builtins.

2018-02-14  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	PR target/84239
	* config/i386/cetintrin.h: Remove _rdssp[d|q] and
	add _get_ssp intrinsics. Remove argument from
	__builtin_ia32_rdssp[d|q].
	* config/i386/i386-builtin-types.def: Add UINT_FTYPE_VOID.
	* config/i386/i386-builtin.def: Remove argument from
	__builtin_ia32_rdssp[d|q].
	* config/i386/i386.c: Use UINT_FTYPE_VOID. Use
	ix86_expand_special_args_builtin for _rdssp[d|q].
	* config/i386/i386.md: Remove argument from rdssp[si|di] insn.
	Clear register before usage.
	* doc/extend.texi: Remove argument from __builtin_ia32_rdssp[d|q].
	Add documentation for new _get_ssp and _inc_ssp intrinsics.

2018-02-14  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84357
	* tree-data-ref.c (object_address_invariant_in_loop_p): Check
	operand 1 of an ARRAY_REF too.

2018-02-14  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/83831
	* config/rx/rx-protos.h (rx_reg_dead_or_unused_after_insn,
	rx_copy_reg_dead_or_unused_notes, rx_fuse_in_memory_bitop): New
	declarations.
	(set_of_reg): New struct.
	(rx_find_set_of_reg, rx_find_use_of_reg): New functions.
	* config/rx/rx.c (rx_reg_dead_or_unused_after_insn,
	rx_copy_reg_dead_or_unused_notes, rx_fuse_in_memory_bitop): New
	functions.
	* config/rx/rx.md (andsi3, iorsi3, xorsi3): Convert to insn_and_split.
	Split into bitclr, bitset, bitinvert patterns if appropriate.
	(*bitset, *bitinvert, *bitclr): Convert to named insn_and_split and
	use rx_fuse_in_memory_bitop.
	(*bitset_in_memory, *bitinvert_in_memory, *bitclr_in_memory): Convert
	to named insn, correct maximum insn length.

2018-02-14  Jozef Lawrynowicz  <jozefl.gcc@gmail.com>

	PR target/79242
	* machmode.def: Define a complex mode for PARTIAL_INT.
	* genmodes.c (complex_class): Return MODE_COMPLEX_INT for
	MODE_PARTIAL_INT.
	* doc/rtl.texi: Document CSPImode.
	* config/msp430/msp430.c (msp430_hard_regno_nregs): Add CPSImode
	handling.
	(msp430_hard_regno_nregs_with_padding): Likewise.

2018-02-13  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/84279
	* config/rs6000/rs6000.c (mem_operand_gpr): Disallow altivec addresses.

2018-02-13  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/84169
	* combine.c (try_combine): New variable split_i2i3.  Set it to true if
	we generated a parallel as new i3 and we split that to new i2 and i3
	instructions.  Handle split_i2i3 similar to swap_i2i3: scan the
	LOG_LINKs of i3 to see which of those need to link to i2 now.  Link
	those to i2, not i1.  Partially rewrite this scan code.

2018-02-13  Jakub Jelinek  <jakub@redhat.com>

	PR c/82210
	* stor-layout.c (place_field): For variable length fields, adjust
	offset_align afterwards not just based on the field's alignment,
	but also on the size.

	PR middle-end/84309
	* match.pd (pow(C,x) -> exp(log(C)*x)): Use exp2s and log2s instead
	of exps and logs in the use_exp2 case.

2018-02-13  Jeff Law  <law@redhat.com>

 	* config/rl/rl78.c (rl78_attribute_table): Fix terminator and
	entry for "vector".

	* config/rl78/rl78.c (rl78_handle_func_attribute): Mark
	ARGS as unused.

2018-02-13  Alexandre Oliva  <aoliva@redhat.com>

	PR debug/84342
	PR debug/84319
	* common.opt (gas-loc-support, gas-locview-support): New.
	(ginline-points, ginternal-reset-location-views): New.
	* doc/invoke.texi: Document them.  Use @itemx where intended.
	(gvariable-location-views): Adjust.
	* target.def (reset_location_view): New.
	* doc/tm.texi.in (DWARF2_ASM_VIEW_DEBUG_INFO): New.
	(TARGET_RESET_LOCATION_VIEW): New.
	* doc/tm.texi: Rebuilt.
	* dwarf2out.c (dwarf2out_default_as_loc_support): New.
	(dwarf2out_default_as_locview_support): New.
	(output_asm_line_debug_info): Use option variables.
	(dwarf2out_maybe_output_loclist_view_pair): Likewise.
	(output_loc_list): Likewise.
	(add_high_low_attributes): Check option variables.
	Don't output entry view attribute in strict mode.
	(gen_inlined_subroutine_die): Check option variables.
	(dwarf2out_inline_entry): Likewise.
	(init_sections_and_labels): Likewise.
	(dwarf2out_early_finish): Likewise.
	(maybe_reset_location_view): New, from...
	(dwarf2out_var_location): ... here.  Call it.
	* debug.h (dwarf2out_default_as_loc_support): Declare.
	(dwarf2out_default_as_locview_support): Declare.
	* hooks.c (hook_int_rtx_insn_0): New.
	* hooks.h (hook_int_rtx_insn_0): Declare.
	* toplev.c (process_options): Take -gas-loc-support and
	-gas-locview-support from dwarf2out.  Enable
	-gvariable-location-views by default only with locview
	assembler support.  Enable -ginternal-reset-location-views by
	default only if the target defines the corresponding hook.
	Enable -ginline-points by default if location views are
	enabled; force it disabled if statement frontiers are
	disabled.
	* tree-inline.c (expand_call_inline): Check option variables.
	* tree-ssa-live.c (remove_unused_scope_block_p): Likewise.

2018-02-13  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84321
	* tree-vrp.c (intersect_range_with_nonzero_bits): Fix VR_ANTI_RANGE
	handling.  Also check whether the anti-range contains any values
	that satisfy the mask; switch to a VR_RANGE if not.

2018-02-13  Paolo Bonzini  <bonzini@gnu.org>

	PR sanitizer/84340
	* internal-fn.def (ASAN_CHECK, ASAN_MARK): Revert changes to fnspec.

2018-02-13  Martin Jambor  <mjambor@suse.cz>

	PR c++/83990
	* ipa-param-manipulation.c (ipa_modify_call_arguments): Use location
	of call statements, also set location of a load to a temporary.

2018-02-13  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.c (add_vector_labels): New function.
	* config/rl78/rl78.c (rl78_handle_vector_attribute): New function.
	* config/rl78/rl78.c (rl78_start_function): Call add_vector_labels.
	* config/rl78/rl78.c (rl78_handle_func_attribute): Removed the assert 
	which checks that no arguments are passed.
	* config/rl78/rl78.c (rl78_attribute_table): Add "vector" attribute.
	* doc/extend.texi: Documentation for the new attribute.

2018-02-13  Andreas Schwab  <schwab@suse.de>

	* config/riscv/linux.h (CPP_SPEC): Define.

2018-02-13  Jakub Jelinek  <jakub@redhat.com>

	PR target/84335
	* config/i386/i386.c (ix86_init_mmx_sse_builtins): Pass
	OPTION_MASK_ISA_AES | OPTION_MASK_ISA_SSE2 instead of
	OPTION_MASK_ISA_AES as first argument to def_builtin_const
	for AES builtins.  Pass OPTION_MASK_ISA_PCLMUL | OPTION_MASK_ISA_SSE2
	instead of OPTION_MASK_ISA_PCLMUL as first argument to
	def_builtin_const for __builtin_ia32_pclmulqdq128 builtin.
	* config/i386/wmmintrin.h: If __SSE2__ is not defined, enable it
	temporarily for AES and PCLMUL builtins.

	PR tree-optimization/84339
	* gimple-fold.c (get_range_strlen): Set *FLEXP to true when handling
	ARRAY_REF where first operand is array_at_struct_end_p COMPONENT_REF.
	Formatting fixes.

	PR middle-end/84309
	* match.pd (pow(C,x) -> exp(log(C)*x)): Optimize instead into
	exp2(log2(C)*x) if C is a power of 2 and c99 runtime is available.
	* generic-match-head.c (canonicalize_math_after_vectorization_p): New
	inline function.
	* gimple-match-head.c (canonicalize_math_after_vectorization_p): New
	inline function.
	* omp-simd-clone.h: New file.
	* omp-simd-clone.c: Include omp-simd-clone.h.
	(expand_simd_clones): No longer static.
	* tree-vect-patterns.c: Include fold-const-call.h, attribs.h,
	cgraph.h and omp-simd-clone.h.
	(vect_recog_pow_pattern): Optimize pow(C,x) to exp(log(C)*x).
	(vect_recog_widen_shift_pattern): Formatting fix.
	(vect_pattern_recog_1): Don't check optab for calls.

	PR target/84336
	* config/i386/sse.md (<avx512>_vpermi2var<mode>3_mask): Force
	operands[2] into a REG before using gen_lowpart on it.

2018-02-12  Jeff Law  <law@redhat.com>

	PR target/83760
	* config/sh/sh.c (find_barrier): Consider a sibling call
	a barrier as well.

	* cse.c (try_back_substitute_reg): Move any REG_ARGS_SIZE note when
	successfully back substituting a reg.

2018-02-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84037
	* tree-vect-slp.c (vect_analyze_slp_cost): Add visited
	parameter, move visited init to caller.
	(vect_slp_analyze_operations): Separate cost from validity
	check, initialize visited once for all instances.
	(vect_schedule_slp): Analyze map to CSE vectorized nodes once
	for all instances.
	* tree-vect-stmts.c (vect_model_simple_cost): Make early
	out an assert.
	(vect_model_promotion_demotion_cost): Likewise.
	(vectorizable_bswap): Guard cost modeling with !slp_node
	instead of !PURE_SLP_STMT to avoid double-counting on hybrid
	SLP stmts.
	(vectorizable_call): Likewise.
	(vectorizable_conversion): Likewise.
	(vectorizable_assignment): Likewise.
	(vectorizable_shift): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_condition): Likewise.
	(vectorizable_comparison): Likewise.

2018-02-12  Paolo Bonzini  <bonzini@gnu.org>

	PR sanitizer/84307
	* internal-fn.def (ASAN_CHECK): Fix fnspec to account for return value.
	(ASAN_MARK): Fix fnspec to account for return value, change pointer
	argument from 'R' to 'W' so that the pointed-to datum is clobbered.

2018-02-08  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83665
	* params.def (inline-min-speedup): Increase from 8 to 15.
	(max-inline-insns-auto): Decrease from 40 to 30.
	* ipa-split.c (consider_split): Add some buffer for function to
	be considered inlining candidate.
	* invoke.texi (max-inline-insns-auto, inline-min-speedup): UPdate
	default values.

2018-02-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84037
	* tree-vect-slp.c (vect_build_slp_tree_2): Try swapping the
	matched stmts if we cannot swap the non-matched ones.

2018-02-12  Olga Makhotina  <olga.makhotina@intel.com>

	* config/i386/avx512fintrin.h (_mm_mask_scalef_round_sd,
	_mm_maskz_scalef_round_sd, _mm_mask_scalef_round_ss,
	_mm_maskz_scalef_round_ss): New intrinsics.
	(__builtin_ia32_scalefsd_round, __builtin_ia32_scalefss_round): Fix.
	* config/i386/i386-builtin.def (__builtin_ia32_scalefsd_round,
	__builtin_ia32_scalefss_round): Remove.
	(__builtin_ia32_scalefsd_mask_round,
	__builtin_ia32_scalefss_mask_round): New intrinsics.
	* config/i386/sse.md (vmscalef<mode><round_name>): Renamed to ...
	(vmscalef<mode><mask_scalar_name><round_scalar_name>): ... this.
	((match_operand:VF_128 2 "<round_nimm_predicate>"
	"<round_constraint>")): Changed to ...
	((match_operand:VF_128 2 "<round_scalar_nimm_predicate>"
	"<round_scalar_constraint>")): ... this.
	("vscalef<ssescalarmodesuffix>\t{<round_op3>%2, %1, %0|
	%0, %1, %2<round_op3>}"): Changed to ...
	("vscalef<ssescalarmodesuffix>\t{<round_scalar_mask_op3>%2, %1,
	%0<mask_scalar_operand3>|%0<mask_scalar_operand3>, %1,
	%2<round_scalar_mask_op3>}"): ... this.
	* config/i386/subst.md (round_scalar_nimm_predicate): New.

2018-02-12  Olga Makhotina  <olga.makhotina@intel.com>

	* config/i386/avx512fintrin.h (_mm_mask_sqrt_round_sd)
	(_mm_maskz_sqrt_round_sd, _mm_mask_sqrt_round_ss)
	(_mm_maskz_sqrt_round_ss): New intrinsics.
	(__builtin_ia32_sqrtsd_round, __builtin_ia32_sqrtss_round): Remove.
	(__builtin_ia32_sqrtsd_mask_round)
	(__builtin_ia32_sqrtss_mask_round): New builtins.
	* config/i386/i386-builtin.def (__builtin_ia32_sqrtsd_round)
	(__builtin_ia32_sqrtss_round): Remove.
	(__builtin_ia32_sqrtsd_mask_round)
	(__builtin_ia32_sqrtss_mask_round): New builtins.
	* config/i386/sse.md (vmsqrt<mode>2<round_name>): Renamed to ...
	(vmsqrt<mode>2<mask_scalar_name><round_scalar_name>): ... this.
	((match_operand:VF_128 1 "vector_operand"
	"xBm,<round_constraint>")): Changed to ...
	((match_operand:VF_128 1 "vector_operand"
	"xBm,<round_scalar_constraint>")): ... this.
	(vsqrt<ssescalarmodesuffix>\t{<round_op3>%1, %2, %0|
	%0, %2, %<iptr>1<round_op3>}): Changed to ...
	(vsqrt<ssescalarmodesuffix>\t{<round_scalar_mask_op3>%1, %2,
	%0<mask_scalar_operand3>|%0<mask_scalar_operand3>, %2,
	%<iptr>1<round_scalar_mask_op3>}): ... this.
	((set_attr "prefix" "<round_prefix>")): Changed to ...
	((set_attr "prefix" "<round_scalar_prefix>")): ... this.

2018-02-11  Steven Munroe  <munroesj@gcc.gnu.org>

	PR target/84266
	* config/rs6000/mmintrin.h (_mm_cmpeq_pi32 [_ARCH_PWR9]):
	Cast vec_cmpeq result to correct type.
	* config/rs6000/mmintrin.h (_mm_cmpgt_pi32 [_ARCH_PWR9]):
	Cast vec_cmpgt result to correct type.

2018-02-11  Alexandre Oliva  <aoliva@redhat.com>

	* final.c (final_scan_insn_1): Renamed from...
	(final_scan_insn): ... this.  New wrapper, to recover
	seen from the outermost call in recursive ones.
	* config/sparc/sparc.c (output_return): Drop seen from call.
	(output_sibcall): Likewise.
	* config/visium/visium.c (output_branch): Likewise.

2018-02-10  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (hppa_profile_hook): Mark SYMBOL_REF for _mcount as
	function label.

2018-02-10  Alan Modra  <amodra@gmail.com>

	PR target/84300
	* config/rs6000/rs6000.md (split_stack_return): Remove (use ..).
	Specify LR as an input.

2018-02-10  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/83987
	* omp-low.c (maybe_remove_omp_member_access_dummy_vars,
	remove_member_access_dummy_vars): New functions.
	(lower_omp_for, lower_omp_taskreg, lower_omp_target,
	lower_omp_1, execute_lower_omp): Use them.

	PR rtl-optimization/84308
	* shrink-wrap.c (spread_components): Release todo vector.

2018-02-09  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/57193
	* ira-color.c (struct allocno_color_data): Add member
	conflict_allocno_hard_prefs.
	(update_conflict_allocno_hard_prefs): New.
	(bucket_allocno_compare_func): Add a preference based on
	conflict_allocno_hard_prefs.
	(push_allocno_to_stack): Update conflict_allocno_hard_prefs.
	(color_allocnos): Remove a dead code.  Initiate
	conflict_allocno_hard_prefs.  Call update_costs_from_prefs.

2018-02-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/84226
	* config/rs6000/vsx.md (p9_xxbrq_v16qi): Change input operand
	constraint from =wa to wa.  Avoid a subreg on the output operand,
	instead use a pseudo and subreg it in a move.
	(p9_xxbrd_<mode>): Changed to ...
	(p9_xxbrd_v2di): ... this insn, without VSX_D iterator.
	(p9_xxbrd_v2df): New expander.
	(p9_xxbrw_<mode>): Changed to ...
	(p9_xxbrw_v4si): ... this insn, without VSX_W iterator.
	(p9_xxbrw_v4sf): New expander.

2018-02-09  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rx/rx.md (movsicc): Update expander to be matched by GCC.

2018-02-09  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83926
	* config/rs6000/vsx.md (vsx_mul_v2di): Handle generating a 64-bit
	multiply in 32-bit mode.
	(vsx_div_v2di): Handle generating a 64-bit signed divide in 32-bit mode.
	(vsx_udiv_v2di): Handle generating a 64-bit unsigned divide in 32-bit
	mode.

2018-02-09  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rx/constraints.md (CALL_OP_SYMBOL_REF): Added new constraint
	to allow or block "symbol_ref" depending on the value of TARGET_JSR.
	* config/rx/rx.md (call_internal): Use CALL_OP_SYMBOL_REF.
	* config/rx/rx.md (call_value_internal): Use CALL_OP_SYMBOL_REF.

2018-02-09  Pierre-Marie de Rodat  <derodat@adacore.com>

	PR lto/84213
	* dwarf2out.c (is_trivial_indirect_ref): New function.
	(dwarf2out_late_global_decl): Do not generate a location
	attribute for variables that have a non-trivial DECL_VALUE_EXPR
	and that are not defined in the current unit.

2018-02-09  Eric Botcazou  <ebotcazou@adacore.com>

	* optabs.c (prepare_cmp_insn): Try harder to emit a direct comparison
	instead of a libcall for UNORDERED.

2018-02-09  Tamar Christina  <tamar.christina@arm.com>

	PR target/82641
	* config/arm/arm-c.c (arm_cpu_builtins): Un-define __ARM_FEATURE_LDREX,
	__ARM_ARCH_PROFILE, __ARM_ARCH_ISA_THUMB, __ARM_FP and __ARM_NEON_FP.

2018-02-09  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	PR target/PR84295
	* config/s390/s390.c (s390_set_current_function): Invoke
	s390_indirect_branch_settings also if fndecl didn't change.

2018-02-09  Alexandre Oliva  <aoliva@redhat.com>

	* config/rs6000/rs6000.md (blockage): Set length to zero.

2018-02-09  Eric Botcazou  <ebotcazou@adacore.com>

	* expr.c (optimize_bitfield_assignment_op): Remove obsolete assertion.

2018-02-09  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/84285
	* gcc.c (STATIC_LIBASAN_LIBS, STATIC_LIBTSAN_LIBS,
	STATIC_LIBLSAN_LIBS, STATIC_LIBUBSAN_LIBS): Handle -static like
	-static-lib*san.

	PR debug/84252
	* var-tracking.c (vt_add_function_parameter): Punt for non-onepart
	PARALLEL incoming that failed vt_get_decl_and_offset check.

	PR middle-end/84237
	* output.h (bss_initializer_p): Add NAMED argument, defaulted to false.
	* varasm.c (bss_initializer_p): Add NAMED argument, if true, ignore
	TREE_READONLY bit.
	(get_variable_section): For decls in named .bss* sections pass true as
	second argument to bss_initializer_p.

2018-02-09  Marek Polacek  <polacek@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR c++/83659
	* fold-const.c (fold_indirect_ref_1): Use VECTOR_TYPE_P macro.
	Formatting fixes.  Verify first that tree_fits_poly_int64_p (op01).
	Sync some changes from cxx_fold_indirect_ref.

2018-02-09  Alexandre Oliva  <aoliva@redhat.com>

	* cfgexpand.c (expand_gimple_basic_block): Handle inline entry
	markers.
	* dwarf2out.c (dwarf2_debug_hooks): Enable inline_entry hook.
	(BLOCK_INLINE_ENTRY_LABEL): New.
	(dwarf2out_var_location): Disregard inline entry markers.
	(inline_entry_data): New struct.
	(inline_entry_data_hasher): New hashtable type.
	(inline_entry_data_hasher::hash): New.
	(inline_entry_data_hasher::equal): New.
	(inline_entry_data_table): New variable.
	(add_high_low_attributes): Add DW_AT_entry_pc and
	DW_AT_GNU_entry_view attributes if a pending entry is found
	in inline_entry_data_table.  Add old entry_pc attribute only
	if debug nonbinding markers are disabled.
	(gen_inlined_subroutine_die): Set BLOCK_DIE if nonbinding
	markers are enabled.
	(block_within_block_p, dwarf2out_inline_entry): New.
	(dwarf2out_finish): Check that no entries remained in
	inline_entry_data_table.
	* final.c (reemit_insn_block_notes): Handle inline entry notes.
	(final_scan_insn, notice_source_line): Likewise.
	(rest_of_clean_state): Skip inline entry markers.
	* gimple-pretty-print.c (dump_gimple_debug): Handle inline entry
	markers.
	* gimple.c (gimple_build_debug_inline_entry): New.
	* gimple.h (enum gimple_debug_subcode): Add
	GIMPLE_DEBUG_INLINE_ENTRY.
	(gimple_build_debug_inline_entry): Declare.
	(gimple_debug_inline_entry_p): New.
	(gimple_debug_nonbind_marker_p): Adjust.
	* insn-notes.def (INLINE_ENTRY): New.
	* print-rtl.c (rtx_writer::print_rtx_operand_code_0): Handle
	inline entry marker notes.
	(print_insn): Likewise.
	* rtl.h	(NOTE_MARKER_P): Add INLINE_ENTRY support.
	(INSN_DEBUG_MARKER_KIND): Likewise.
	(GEN_RTX_DEBUG_MARKER_INLINE_ENTRY_PAT): New.
	* tree-inline.c	(expand_call_inline): Build and insert
	debug_inline_entry stmt.
	* tree-ssa-live.c (remove_unused_scope_block_p): Preserve
	inline entry blocks early, if nonbind markers are enabled.
	(dump_scope_block): Dump fragment info.
	* var-tracking.c (reemit_marker_as_note): Handle inline entry note.
	* doc/gimple.texi (gimple_debug_inline_entry_p): New.
	(gimple_build_debug_inline_entry): New.
	* doc/invoke.texi (gstatement-frontiers, gno-statement-frontiers):
	Enable/disable inline entry points too.
	* doc/rtl.texi (NOTE_INSN_INLINE_ENTRY): New.
	(DEBUG_INSN): Describe inline entry markers.

	* common.opt (gvariable-location-views): New.
	(gvariable-location-views=incompat5): New.
	* config.in: Rebuilt.
	* configure: Rebuilt.
	* configure.ac: Test assembler for view support.
	* dwarf2asm.c (dw2_asm_output_symname_uleb128): New.
	* dwarf2asm.h (dw2_asm_output_symname_uleb128): Declare.
	* dwarf2out.c (var_loc_view): New typedef.
	(struct dw_loc_list_struct): Add vl_symbol, vbegin, vend.
	(dwarf2out_locviews_in_attribute): New.
	(dwarf2out_locviews_in_loclist): New.
	(dw_val_equal_p): Compare val_view_list of dw_val_class_view_lists.
	(enum dw_line_info_opcode): Add LI_adv_address.
	(struct dw_line_info_table): Add view.
	(RESET_NEXT_VIEW, RESETTING_VIEW_P): New macros.
	(DWARF2_ASM_VIEW_DEBUG_INFO): Define default.
	(zero_view_p): New variable.
	(ZERO_VIEW_P): New macro.
	(output_asm_line_debug_info): New.
	(struct var_loc_node): Add view.
	(add_AT_view_list, AT_loc_list): New.
	(add_var_loc_to_decl): Add view param.  Test it against last.
	(new_loc_list): Add view params.  Record them.
	(AT_loc_list_ptr): Handle loc and view lists.
	(view_list_to_loc_list_val_node): New.
	(print_dw_val): Handle dw_val_class_view_list.
	(size_of_die): Likewise.
	(value_format): Likewise.
	(loc_list_has_views): New.
	(gen_llsym): Set vl_symbol too.
	(maybe_gen_llsym, skip_loc_list_entry): New.
	(dwarf2out_maybe_output_loclist_view_pair): New.
	(output_loc_list): Output view list or entries too.
	(output_view_list_offset): New.
	(output_die): Handle dw_val_class_view_list.
	(output_dwarf_version): New.
	(output_compilation_unit_header): Use it.
	(output_skeleton_debug_sections): Likewise.
	(output_rnglists, output_line_info): Likewise.
	(output_pubnames, output_aranges): Update version comments.
	(output_one_line_info_table): Output view numbers in asm comments.
	(dw_loc_list): Determine current endview, pass it to new_loc_list.
	Call maybe_gen_llsym.
	(loc_list_from_tree_1): Adjust.
	(add_AT_location_description): Create view list attribute if
	needed, check it's absent otherwise.
	(convert_cfa_to_fb_loc_list): Adjust.
	(maybe_emit_file): Call output_asm_line_debug_info for test.
	(dwarf2out_var_location): Reset views as needed.  Precompute
	add_var_loc_to_decl args.  Call get_attr_min_length only if we have the
	attribute.  Set view.
	(new_line_info_table): Reset next view.
	(set_cur_line_info_table): Call output_asm_line_debug_info for test.
	(dwarf2out_source_line): Likewise.  Output view resets and labels to
	the assembler, or select appropriate line info opcodes.
	(prune_unused_types_walk_attribs): Handle dw_val_class_view_list.
	(optimize_string_length): Catch it.  Adjust.
	(resolve_addr): Copy vl_symbol along with ll_symbol.  Handle
	dw_val_class_view_list, and remove it if no longer needed.
	(hash_loc_list): Hash view numbers.
	(loc_list_hasher::equal): Compare them.
	(optimize_location_lists): Check whether a view list symbol is
	needed, and whether the locview attribute is present, and
	whether they match.  Remove the locview attribute if no longer
	needed.
	(index_location_lists): Call skip_loc_list_entry for test.
	(dwarf2out_finish): Call output_asm_line_debug_info for test.
	Use output_dwarf_version.
	* dwarf2out.h (enum dw_val_class): Add dw_val_class_view_list.
	(struct dw_val_node): Add val_view_list.
	* final.c (SEEN_NEXT_VIEW): New.
	(set_next_view_needed): New.
	(clear_next_view_needed): New.
	(maybe_output_next_view): New.
	(final_start_function): Rename to...
	(final_start_function_1): ... this.  Take pointer to FIRST,
	add SEEN parameter.  Emit param bindings in the initial view.
	(final_start_function): Reintroduce SEEN-less interface.
	(final): Rename to...
	(final_1): ... this.  Take SEEN parameter.  Output final pending
	next view at the end.
	(final): Reintroduce seen-less interface.
	(final_scan_insn): Output pending next view before switching
	sections or ending a block.  Mark the next view as needed when
	outputting variable locations.  Notify debug backend of section
	changes, and of location view changes.
	(rest_of_handle_final): Adjust.
	* toplev.c (process_options): Autodetect value for debug variable
	location views option.  Warn on incompat5 without -gdwarf-5.
	* doc/invoke.texi (gvariable-location-views): New.
	(gvariable-location-views=incompat5): New.
	(gno-variable-location-views): New.

2018-02-08  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/84136
	* tree-cfg.c (find_taken_edge_computed_goto): Remove assertion
	that the result of find_edge is non-NULL.

2018-02-08  Sergey Shalnov  <sergey.shalnov@intel.com>

	PR target/83008
	* config/i386/x86-tune-costs.h (skylake_cost): Fix cost of
	storing integer register in SImode.  Fix cost of 256 and 512
	byte aligned SSE register store.

2018-02-08  Sergey Shalnov  <sergey.shalnov@intel.com>

	* config/i386/i386.c (ix86_multiplication_cost): Fix
	multiplication cost for TARGET_AVX512DQ.

2018-02-08  Marek Polacek  <polacek@redhat.com>

	PR tree-optimization/84238
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Verify the result of
	get_range_strlen.

2018-02-08  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84265
	* tree-vect-stmts.c (vectorizable_store): Don't treat
	VMAT_CONTIGUOUS accesses as grouped.
	(vectorizable_load): Likewise.

2018-02-08  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/81635
	* wide-int.h (wi::round_down_for_mask, wi::round_up_for_mask): Declare.
	* wide-int.cc (wi::round_down_for_mask, wi::round_up_for_mask)
	(test_round_for_mask): New functions.
	(wide_int_cc_tests): Call test_round_for_mask.
	* tree-vrp.h (intersect_range_with_nonzero_bits): Declare.
	* tree-vrp.c (intersect_range_with_nonzero_bits): New function.
	* tree-data-ref.c (split_constant_offset_1): Use it to refine the
	range returned by get_range_info.

2018-02-08  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/81360
	* cgraph.h (symtab_node::output_to_lto_symbol_table_p): Declare
	* symtab.c: Include builtins.h
	(symtab_node::output_to_lto_symbol_table_p): Move here
	from lto-streamer-out.c:output_symbol_p.
	* lto-streamer-out.c (write_symbol): Turn early exit to assert.
	(output_symbol_p): Move all logic to symtab.c
	(produce_symtab): Update.

2018-02-08  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* config/s390/s390-opts.h (enum indirect_branch): Define.
	* config/s390/s390-protos.h (s390_return_addr_from_memory)
	(s390_indirect_branch_via_thunk)
	(s390_indirect_branch_via_inline_thunk): Add function prototypes.
	(enum s390_indirect_branch_type): Define.
	* config/s390/s390.c (struct s390_frame_layout, struct
	machine_function): Remove.
	(indirect_branch_prez10thunk_mask, indirect_branch_z10thunk_mask)
	(indirect_branch_table_label_no, indirect_branch_table_name):
	Define variables.
	(INDIRECT_BRANCH_NUM_OPTIONS): Define macro.
	(enum s390_indirect_branch_option): Define.
	(s390_return_addr_from_memory): New function.
	(s390_handle_string_attribute): New function.
	(s390_attribute_table): Add new attribute handler.
	(s390_execute_label): Handle UNSPEC_EXECUTE_JUMP patterns.
	(s390_indirect_branch_via_thunk): New function.
	(s390_indirect_branch_via_inline_thunk): New function.
	(s390_function_ok_for_sibcall): When jumping via thunk disallow
	sibling call optimization for non z10 compiles.
	(s390_emit_call): Force indirect branch target to be a single
	register.  Add r1 clobber for non-z10 compiles.
	(s390_emit_epilogue): Emit return jump via return_use expander.
	(s390_reorg): Handle JUMP_INSNs as execute targets.
	(s390_option_override_internal): Perform validity checks for the
	new command line options.
	(s390_indirect_branch_attrvalue): New function.
	(s390_indirect_branch_settings): New function.
	(s390_set_current_function): Invoke s390_indirect_branch_settings.
	(s390_output_indirect_thunk_function):  New function.
	(s390_code_end): Implement target hook.
	(s390_case_values_threshold): Implement target hook.
	(TARGET_ASM_CODE_END, TARGET_CASE_VALUES_THRESHOLD): Define target
	macros.
	* config/s390/s390.h (struct s390_frame_layout)
	(struct	machine_function): Move here from s390.c.
	(TARGET_INDIRECT_BRANCH_NOBP_RET)
	(TARGET_INDIRECT_BRANCH_NOBP_JUMP)
	(TARGET_INDIRECT_BRANCH_NOBP_JUMP_THUNK)
	(TARGET_INDIRECT_BRANCH_NOBP_JUMP_INLINE_THUNK)
	(TARGET_INDIRECT_BRANCH_NOBP_CALL)
	(TARGET_DEFAULT_INDIRECT_BRANCH_TABLE)
	(TARGET_INDIRECT_BRANCH_THUNK_NAME_EXRL)
	(TARGET_INDIRECT_BRANCH_THUNK_NAME_EX)
	(TARGET_INDIRECT_BRANCH_TABLE): Define macros.
	* config/s390/s390.md (UNSPEC_EXECUTE_JUMP)
	(INDIRECT_BRANCH_THUNK_REGNUM): Define constants.
	(mnemonic attribute): Add values which aren't recognized
	automatically.
	("*cjump_long", "*icjump_long", "*basr", "*basr_r"): Disable
	pattern for branch conversion.  Fix mnemonic attribute.
	("*c<code>", "*sibcall_br", "*sibcall_value_br", "*return"): Emit
	indirect branch via thunk if requested.
	("indirect_jump", "<code>"): Expand patterns for branch conversion.
	("*indirect_jump"): Disable for branch conversion using out of
	line thunks.
	("indirect_jump_via_thunk<mode>_z10")
	("indirect_jump_via_thunk<mode>")
	("indirect_jump_via_inlinethunk<mode>_z10")
	("indirect_jump_via_inlinethunk<mode>", "*casesi_jump")
	("casesi_jump_via_thunk<mode>_z10", "casesi_jump_via_thunk<mode>")
	("casesi_jump_via_inlinethunk<mode>_z10")
	("casesi_jump_via_inlinethunk<mode>", "*basr_via_thunk<mode>_z10")
	("*basr_via_thunk<mode>", "*basr_r_via_thunk_z10")
	("*basr_r_via_thunk", "return<mode>_prez10"): New pattern.
	("*indirect2_jump"): Disable for branch conversion.
	("casesi_jump"): Turn into expander and expand patterns for branch
	conversion.
	("return_use"): New expander.
	("*return"): Emit return via thunk and rename it to ...
	("*return<mode>"): ... this one.
	* config/s390/s390.opt: Add new options and and enum for the
	option values.

2018-02-08  Richard Sandiford  <richard.sandiford@linaro.org>

	* lra-constraints.c (match_reload): Unconditionally use
	gen_lowpart_SUBREG, rather than selecting between that
	and equivalent gen_rtx_SUBREG code.

2018-02-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84233
	* tree-ssa-phiprop.c (propagate_with_phi): Use separate
	changed flag instead of boguously re-using phi_inserted.

2018-02-08  Martin Jambor  <mjambor@suse.cz>

	* hsa-gen.c (get_symbol_for_decl): Set program allocation for
	static local variables.

2018-02-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84278
	* tree-vect-stmts.c (vectorizable_store): When looking for
	smaller vector types to perform grouped strided loads/stores
	make sure the mode is supported by the target.
	(vectorizable_load): Likewise.

2018-02-08  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (aarch64_components_for_bb):
	Increase LDP/STP opportunities by adding adjacent callee-saves.

2018-02-08  Wilco Dijkstra  <wdijkstr@arm.com>

	PR rtl-optimization/84068
	PR rtl-optimization/83459
	* haifa-sched.c (rank_for_schedule): Fix SCHED_PRESSURE_MODEL sorting.

2018-02-08  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/84224
	* gimple-ssa-warn-alloca.c (pass_walloca::execute): Remove assert.
	* calls.c (gimple_alloca_call_p): Only return TRUE when we have
	non-zero arguments.

2018-02-07  Iain Sandoe  <iain@codesourcery.com>

	PR target/84113
	* config/rs6000/altivec.md (*restore_world): Remove LR use.
	* config/rs6000/predicates.md (restore_world_operation): Adjust op
	count, remove one USE.

2018-02-07  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* doc/install.texi (Configuration): Document the
	--with-long-double-format={ibm,ieee} PowerPC configuration
	options.

	PR target/84154
	* config/rs6000/rs6000.md (fix_trunc<SFDF:mode><QHI:mode>2):
	Convert from define_expand to be define_insn_and_split.  Rework
	float/double/_Float128 conversions to QI/HI/SImode to work with
	both ISA 2.07 (power8) or ISA 3.0 (power9).  Fix regression where
	conversions to QI/HImode types did a store and then a load to
	truncate the value.  For conversions to VSX registers, don't split
	the insn, instead emit the code directly.  Use the code iterator
	any_fix to combine signed and unsigned conversions.
	(fix<uns>_trunc<SFDF:mode>si2_p8): Likewise.
	(fixuns_trunc<SFDF:mode><QHI:mode>2): Likewise.
	(fix_trunc<IEEE128:mode><QHI:mode>2): Likewise.
	(fix<uns>_trunc<SFDF:mode><QHI:mode>2): Likewise.
	(fix_<mode>di2_hw): Likewise.
	(fixuns_<mode>di2_hw): Likewise.
	(fix_<mode>si2_hw): Likewise.
	(fixuns_<mode>si2_hw): Likewise.
	(fix<uns>_<IEEE128:mode><SDI:mode>2_hw): Likewise.
	(fix<uns>_trunc<IEEE128:mode><QHI:mode>2): Likewise.
	(fctiw<u>z_<mode>_smallint): Rename fctiw<u>z_<mode>_smallint to
	fix<uns>_trunc<SFDF:mode>si2_p8.
	(fix_trunc<SFDF:mode><QHI:mode>2_internal): Delete, no longer
	used.
	(fixuns_trunc<SFDF:mode><QHI:mode>2_internal): Likewise.
	(fix<uns>_<mode>_mem): Likewise.
	(fctiw<u>z_<mode>_mem): Likewise.
	(fix<uns>_<mode>_mem): Likewise.
	(fix<uns>_trunc<SFDF:mode><QHSI:mode>2_mem): On ISA 3.0, prevent
	the register allocator from doing a direct move to the GPRs to do
	a store, and instead use the ISA 3.0 store byte/half-word from
	vector register instruction.  For IEEE 128-bit floating point,
	also optimize stores of 32-bit ints.
	(fix<uns>_trunc<IEEE128:mode><QHSI:mode>2_mem): Likewise.

2018-02-07  Alan Hayward  <alan.hayward@arm.com>

	* genextract.c (push_pathstr_operand): New function to support
	[a-zA-Z].
	(walk_rtx): Call push_pathstr_operand.
	(print_path): Support [a-zA-Z].

2018-02-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84037
	* tree-vectorizer.h (struct _loop_vec_info): Add ivexpr_map member.
	(cse_and_gimplify_to_preheader): Declare.
	(vect_get_place_in_interleaving_chain): Likewise.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	ivexpr_map.
	(_loop_vec_info::~_loop_vec_info): Delete it.
	(cse_and_gimplify_to_preheader): New function.
	* tree-vect-slp.c (vect_get_place_in_interleaving_chain): Export.
	* tree-vect-stmts.c (vectorizable_store): CSE base and steps.
	(vectorizable_load): Likewise.  For grouped stores always base
	the IV on the first element.
	* tree-vect-loop-manip.c (vect_loop_versioning): Unshare versioning
	condition before gimplifying.

2018-02-07  Jakub Jelinek  <jakub@redhat.com>

	* tree-eh.c (operation_could_trap_helper_p): Ignore honor_trapv for
	*DIV_EXPR and *MOD_EXPR.

2018-02-07  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84248
	* config/i386/i386.c (ix86_option_override_internal): Mask out
	the CF_SET bit when checking -fcf-protection.

2018-02-07  Tom de Vries  <tom@codesourcery.com>

	PR libgomp/84217
	* omp-expand.c (expand_oacc_collapse_init): Ensure diff_type is large
	enough.

2018-02-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84204
	* tree-chrec.c (chrec_fold_plus_1): Remove size limiting in
	this place.

	PR tree-optimization/84205
	* graphite-isl-ast-to-gimple.c (binary_op_to_tree): Also
	special-case isl_ast_op_zdiv_r.

	PR tree-optimization/84223
	* graphite-scop-detection.c (gather_bbs::before_dom_children):
	Only add conditions from within the region.
	(gather_bbs::after_dom_children): Adjust.

2018-02-07  Georg-Johann Lay  <avr@gjlay.de>

	PR target/84209
	* config/avr/avr.h (GENERAL_REGNO_P, GENERAL_REG_P): New macros.
	* config/avr/avr.md: Only post-reload split REG-REG moves if
	either register is GENERAL_REG_P.

2018-02-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84235
	* tree-ssa-scopedtables.c
	(avail_exprs_stack::simplify_binary_operation): Fir MINUS_EXPR, punt
	if the subtraction is performed in floating point type where NaNs are
	honored.  For *DIV_EXPR, punt for ALL_FRACT_MODE_Ps where we can't
	build 1.  Formatting fix.

2018-02-06  Jakub Jelinek  <jakub@redhat.com>

	PR target/84146
	* config/i386/i386.c (rest_of_insert_endbranch): Only skip
	NOTE_INSN_CALL_ARG_LOCATION after a call, not anything else,
	and skip it regardless of bb boundaries.  Use CALL_P macro,
	don't test INSN_P (insn) together with CALL_P or JUMP_P check
	unnecessarily, formatting fix.

2018-02-06  Michael Collison  <michael.collison@arm.com>

	* config/arm/thumb2.md:
	(*thumb2_mov_negscc): Split only if TARGET_THUMB2 && !arm_restrict_it.
	(*thumb_mov_notscc): Ditto.

2018-02-06  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/84154
	* config/rs6000/rs6000.md (su code attribute): Use "u" for
	unsigned_fix, not "s".

2018-02-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac (gcc_fn_eh_frame_ro): New function.
	(gcc_cv_as_cfi_directive): Check both 32 and 64-bit assembler for
	correct .eh_frame permissions.
	* configure: Regenerate.

2018-02-06  Andrew Jenner  <andrew@codeourcery.com>

	* doc/invoke.texi: Add section for the PowerPC SPE backend. Remove
	irrelevant options.

2018-02-06  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Display warning message for -mno-speculate-indirect-jumps.

2018-02-06  Andrew Jenner  <andrew@codesourcery.com>

	* config/powerpcspe/powerpcspe.opt: (msimple-fpu, mfpu) Add
	Undocumented.
	* config/powerpcspe/sysv4.opt (mbit-align): Likewise.

2018-02-06  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/84225
	* tree-eh.c (find_trapping_overflow): Only call
	operation_no_trapping_overflow when ANY_INTEGRAL_TYPE_P.

2018-02-06  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	PR target/84145
	* config/i386/i386.c: Reimplement the check of possible options
	-mibt/-mshstk conbination. Change error messages.
	* doc/invoke.texi: Fix a typo: remove extra '='.

2018-02-06  Marek Polacek  <polacek@redhat.com>

	PR tree-optimization/84228
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Skip debug statements.

2018-02-06  Tamar Christina  <tamar.christina@arm.com>

	PR target/82641
	* config/arm/arm.c (arm_print_asm_arch_directives): Record already
	emitted arch directives.
	* config/arm/arm-c.c (arm_cpu_builtins): Undefine __ARM_ARCH and
	__ARM_FEATURE_COPROC before changing architectures.

2018-02-06  Richard Biener  <rguenther@suse.de>

	* config/i386/i386.c (print_reg): Fix typo.
	(ix86_loop_unroll_adjust): Do not unroll beyond the original nunroll.

2018-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* configure: Regenerate.

2018-02-05  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83369
	* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Use %G to print
	inlining context.

2018-02-05  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Cherry-pick upstream r323995.

2018-02-05  Richard Sandiford  <richard.sandiford@linaro.org>

	* ira.c (ira_init_register_move_cost): Adjust comment.

2018-02-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84137
	* doc/gcov.texi: Fix typo in documentation.

2018-02-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/83879
	* doc/gcov.texi: Document necessity of --dynamic-list-data when
	using dlopen functionality.

2018-02-05  Olga Makhotina  <olga.makhotina@intel.com>

	* config/i386/avx512dqintrin.h (_mm_mask_range_sd, _mm_maskz_range_sd,
	_mm_mask_range_round_sd, _mm_maskz_range_round_sd, _mm_mask_range_ss,
	_mm_maskz_range_ss, _mm_mask_range_round_ss,
	_mm_maskz_range_round_ss): New intrinsics.
	(__builtin_ia32_rangesd128_round)
	(__builtin_ia32_rangess128_round): Remove.
	(__builtin_ia32_rangesd128_mask_round,
	__builtin_ia32_rangess128_mask_round): New builtins.
	* config/i386/i386-builtin.def (__builtin_ia32_rangesd128_round,
	__builtin_ia32_rangess128_round): Remove.
	(__builtin_ia32_rangesd128_mask_round,
	__builtin_ia32_rangess128_mask_round): New builtins.
	* config/i386/sse.md (ranges<mode><round_saeonly_name>): Renamed to ...
	(ranges<mode><mask_scalar_name><round_saeonly_scalar_name>): ... this.
	((match_operand:VF_128 2 "<round_saeonly_nimm_predicate>"
	"<round_saeonly_constraint>")): Changed to ...
	((match_operand:VF_128 2 "<round_saeonly_scalar_nimm_predicate>"
	"<round_saeonly_scalar_constraint>")): ... this.
	("vrange<ssescalarmodesuffix>\t{%3, <round_saeonly_op4>%2, %1, %0|
	%0, %1, %2<round_saeonly_op4>, %3}"): Changed to ...
	("vrange<ssescalarmodesuffix>\t{%3, <round_saeonly_scalar_mask_op4>%2,
	%1, %0<mask_scalar_operand4>|%0<mask_scalar_operand4>, %1,
	%2<round_saeonly_scalar_mask_op4>, %3}"): ... this.

2018-02-02  Andrew Jenner  <andrew@codesourcery.com>

	* config/powerpcspe/powerpcspe.opt: Add Undocumented to irrelevant
	options.
	* config/powerpcspe/powerpcspe-tables.opt (rs6000_cpu_opt_value):
	Remove all values except native, 8540 and 8548.

2018-02-02  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (ix86_output_function_return): Pass
	INVALID_REGNUM, instead of -1, as invalid register number to
	indirect_thunk_name and output_indirect_thunk.

2018-02-02  Julia Koval  <julia.koval@intel.com>

	* config.gcc: Add -march=icelake.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect icelake.
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle icelake.
	* config/i386/i386.c (processor_costs): Add m_ICELAKE.
	(PTA_ICELAKE, PTA_AVX512VNNI, PTA_GFNI, PTA_VAES, PTA_AVX512VBMI2,
	PTA_VPCLMULQDQ, PTA_RDPID, PTA_AVX512BITALG): New.
	(processor_target_table): Add icelake.
	(ix86_option_override_internal): Handle new PTAs.
	(get_builtin_code_for_version): Handle icelake.
	(M_INTEL_COREI7_ICELAKE): New.
	(fold_builtin_cpu): Handle icelake.
	* config/i386/i386.h (TARGET_ICELAKE, PROCESSOR_ICELAKE): New.
	* doc/invoke.texi: Add -march=icelake.

2018-02-02  Julia Koval  <julia.koval@intel.com>

	* config/i386/i386.c (ix86_option_override_internal): Change flags type
	to wide_int_bitmask.
	* wide-int-bitmask.h: New.

2018-02-02  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	PR target/84066
	* config/i386/i386.md: Replace Pmode with word_mode in
	builtin_setjmp_setup and builtin_longjmp to support x32.

2018-02-01  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/56010
	PR target/83743
	* config/rs6000/driver-rs6000.c: #include "diagnostic.h".
	#include "opts.h".
	(rs6000_supported_cpu_names): New static variable.
	(linux_cpu_translation_table): Likewise.
	(elf_platform) <cpu>: Define new static variable and use it.
	Translate kernel AT_PLATFORM name to canonical name if needed.
	Error if platform name is unknown.

2018-02-01  Aldy Hernandez  <aldyh@redhat.com>

	PR target/84089
	* config/pa/predicates.md (base14_operand): Handle E_VOIDmode.

2018-02-01  Jeff Law  <law@redhat.com>

	PR target/84128
	* config/i386/i386.c (release_scratch_register_on_entry): Add new
	OFFSET and RELEASE_VIA_POP arguments.  Use SP+OFFSET to restore
	the scratch if RELEASE_VIA_POP is false.
	(ix86_adjust_stack_and_probe_stack_clash): Un-constify SIZE.
	If we have to save a temporary register, decrement SIZE appropriately.
	Pass new arguments to release_scratch_register_on_entry.
	(ix86_adjust_stack_and_probe): Likewise.
	(ix86_emit_probe_stack_range): Pass new arguments to
	release_scratch_register_on_entry.

2018-02-01  Uros Bizjak  <ubizjak@gmail.com>

	PR rtl-optimization/84157
	* combine.c (change_zero_ext): Use REG_P predicate in
	front of HARD_REGISTER_P predicate.

2018-02-01  Georg-Johann Lay  <avr@gjlay.de>

	* config/avr/avr.c (avr_option_override): Move disabling of
	-fdelete-null-pointer-checks to...
	* common/config/avr/avr-common.c (avr_option_optimization_table):
	...here.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/81635
	* tree-data-ref.c (split_constant_offset_1): For types that
	wrap on overflow, try to use range info to prove that wrapping
	cannot occur.

2018-02-01  Renlin Li  <renlin.li@arm.com>

	PR target/83370
	* config/aarch64/aarch64.c (aarch64_class_max_nregs): Handle
	TAILCALL_ADDR_REGS.
	(aarch64_register_move_cost): Likewise.
	* config/aarch64/aarch64.h (reg_class): Rename CALLER_SAVE_REGS to
	TAILCALL_ADDR_REGS.
	(REG_CLASS_NAMES): Likewise.
	(REG_CLASS_CONTENTS): Rename CALLER_SAVE_REGS to
	TAILCALL_ADDR_REGS. Remove IP registers.
	* config/aarch64/aarch64.md (Ucs): Update register constraint.

2018-02-01  Richard Biener  <rguenther@suse.de>

	* domwalk.h (dom_walker::dom_walker): Add additional constructor
	for specifying RPO order and allow NULL for that.
	* domwalk.c (dom_walker::dom_walker): Likewise.
	(dom_walker::walk): Handle NULL RPO order.
	* tree-into-ssa.c (rewrite_dom_walker): Do not walk dom children
	in RPO order.
	(rewrite_update_dom_walker): Likewise.
	(mark_def_dom_walker): Likewise.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-protos.h (aarch64_split_sve_subreg_move)
	(aarch64_maybe_expand_sve_subreg_move): Declare.
	* config/aarch64/aarch64.md (UNSPEC_REV_SUBREG): New unspec.
	* config/aarch64/predicates.md (aarch64_any_register_operand): New
	predicate.
	* config/aarch64/aarch64-sve.md (mov<mode>): Optimize subreg moves
	that are semantically a reverse operation.
	(*aarch64_sve_mov<mode>_subreg_be): New pattern.
	* config/aarch64/aarch64.c (aarch64_maybe_expand_sve_subreg_move):
	(aarch64_replace_reg_mode, aarch64_split_sve_subreg_move): New
	functions.
	(aarch64_can_change_mode_class): For big-endian, forbid changes
	between two SVE modes if they have different element sizes.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_expand_sve_const_vector): Prefer
	the TImode handling for big-endian targets.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-sve.md (sve_ld1rq): Replace with...
	(*sve_ld1rq<Vesize>): ... this new pattern.  Handle all element sizes,
	not just bytes.
	* config/aarch64/aarch64.c (aarch64_expand_sve_widened_duplicate):
	Remove BSWAP handing for big-endian targets and use the form of
	LD1RQ appropariate for the mode.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_simd_valid_immediate): Handle
	all CONST_VECTOR_DUPLICATE_P vectors, not just those with a single
	duplicated element.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tearget/83845
	* config/aarch64/aarch64.c (aarch64_secondary_reload): Tighten
	check for operands that need to go through aarch64_sve_reload_be.

2018-02-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/81661
	PR tree-optimization/84117
	* tree-eh.h (rewrite_to_non_trapping_overflow): Declare.
	* tree-eh.c: Include gimplify.h.
	(find_trapping_overflow, replace_trapping_overflow,
	rewrite_to_non_trapping_overflow): New functions.
	* tree-vect-loop.c: Include tree-eh.h.
	(vect_get_loop_niters): Use rewrite_to_non_trapping_overflow.
	* tree-data-ref.c: Include tree-eh.h.
	(get_segment_min_max): Use rewrite_to_non_trapping_overflow.

2018-01-31  Uros Bizjak  <ubizjak@gmail.com>

	PR rtl-optimization/84123
	* combine.c (change_zero_ext): Check if hard register satisfies
	can_change_dest_mode before calling gen_lowpart_SUBREG.

2018-01-31  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/82444
	* ira.c (ira_init_register_move_cost): Remove assert.

2018-01-31  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/84071
	* doc/tm.texi.in (WORD_REGISTER_OPERATIONS): Add explicit case.
	* doc/tm.texi: Regenerate.

2018-01-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84132
	* tree-data-ref.c (analyze_miv_subscript): Properly
	check whether evolution_function_is_affine_multivariate_p
	before calling gcd_of_steps_may_divide_p.

2018-01-31  Julia Koval  <julia.koval@intel.com>

	PR target/83618
	* config/i386/i386.c (ix86_expand_builtin): Handle IX86_BUILTIN_RDPID.
	* config/i386/i386.md (rdpid_rex64) New.
	(rdpid): Make 32bit only.

2018-01-29  Aldy Hernandez  <aldyh@redhat.com>

	PR lto/84105
	* tree-pretty-print.c (dump_generic_node): Handle a TYPE_NAME with
	an IDENTIFIER_NODE for FUNCTION_TYPE's.

2018-01-31  Eric Botcazou  <ebotcazou@adacore.com>

	Revert
	2018-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc.md (vxworks_load_got): Set the GOT register.

2018-01-31  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/84071
	* combine.c (record_dead_and_set_regs_1): Record the source unmodified
	for a paradoxical SUBREG on a WORD_REGISTER_OPERATIONS target.

2018-01-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_handle_aux_attribute): New function.
	(arc_attribute_table): Add 'aux' attribute.
	(arc_in_small_data_p): Consider aux like variables.
	(arc_is_aux_reg_p): New function.
	(arc_asm_output_aligned_decl_local): Ignore 'aux' like variables.
	(arc_get_aux_arg): New function.
	(prepare_move_operands): Handle aux-register access.
	(arc_handle_aux_attribute): New function.
	* doc/extend.texi (ARC Variable attributes): Add subsection.

2018-01-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_is_uncached_mem_p): Function proto.
	* config/arc/arc.c (arc_handle_uncached_attribute): New function.
	(arc_attribute_table): Add 'uncached' attribute.
	(arc_print_operand): Print '.di' flag for uncached memory
	accesses.
	(arc_in_small_data_p): Do not consider for small data the uncached
	types.
	(arc_is_uncached_mem_p): New function.
	* config/arc/predicates.md (compact_store_memory_operand): Check
	for uncached memory accesses.
	(nonvol_nonimm_operand): Likewise.
	* gcc/doc/extend.texi (ARC Type Attribute): New subsection.

2018-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR c/84100
	* common.opt (falign-functions=, falign-jumps=, falign-labels=,
	falign-loops=): Add Optimization flag.

2018-01-30  Jeff Law  <law@redhat.com>

	PR target/84064
	* i386.c (ix86_adjust_stack_and_probe_stack_clash): New argument
	INT_REGISTERS_SAVED.  Check it prior to calling
	get_scratch_register_on_entry.
	(ix86_adjust_stack_and_probe): Similarly.
	(ix86_emit_probe_stack_range): Similarly.
	(ix86_expand_prologue): Corresponding changes.

2018-01-30  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR target/40411
	* config/sol2.h (STARTFILE_ARCH_SPEC): Use -std=c*,
	-std=iso9899:199409 instead of -pedantic to select values-Xc.o.

2018-01-30  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/84112
	* lra-constraints.c (curr_insn_transform): Process AND in the
	address.

2018-01-30  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/83986
	* sched-deps.c (sched_analyze_insn): For frame related insns, add anti
	dependence against last_pending_memory_flush in addition to
	pending_jump_insns.

2018-01-30  Alexandre Oliva  <aoliva@redhat.com>

	PR tree-optimization/81611
	* tree-ssa-dom.c (simple_iv_increment_p): Skip intervening
	copies.

2018-01-30  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	PR target/83758
	* config/rs6000/rs6000.c (rs6000_internal_arg_pointer): Only return
	a reg rtx.

2018-01-30  Richard Biener  <rguenther@suse.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84111
	* tree-ssa-loop-ivcanon.c (tree_unroll_loops_completely_1): Skip
	inner loops added during recursion, as they don't have up-to-date
	SSA form.

2018-01-30  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/81360
	* ipa-inline.c (can_inline_edge_p): Break out late tests to...
	(can_inline_edge_by_limits_p): ... here.
	(can_early_inline_edge_p, check_callers,
	update_caller_keys, update_callee_keys, recursive_inlining,
	add_new_edges_to_heap, speculation_useful_p,
	inline_small_functions,
	inline_small_functions, flatten_function,
	inline_to_all_callers_1): Update.

2018-01-30  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.c (profile_count::combine_with_ipa_count): Handle
	zeros correctly.

2018-01-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83008
	* tree-vect-slp.c (vect_analyze_slp_cost_1): Properly cost
	invariant and constant vector uses in stmts when they need
	more than one stmt.

2018-01-30  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR bootstrap/84017
	* configure.ac (gcc_cv_as_shf_merge): Disable on Solaris 10/x86.
	* configure: Regenerate.

2018-01-30  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-sve.md (*vec_extract<mode><Vel>_0): New
	pattern.
	(*vec_extract<mode><Vel>_v128): Require a nonzero lane number.
	Use gen_rtx_REG rather than gen_lowpart.

2018-01-30  Richard Sandiford  <richard.sandiford@linaro.org>

	* lra-constraints.c (match_reload): Use subreg_lowpart_offset
	rather than 0 when creating partial subregs.

2018-01-30  Richard Sandiford  <richard.sandiford@linaro.org>

	* vec-perm-indices.c (vec_perm_indices::series_p): Give examples
	of usage.

2018-01-29  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/81550
	* config/rs6000/rs6000.c (rs6000_setup_reg_addr_masks): If DFmode
	and SFmode can go in Altivec registers (-mcpu=power7 for DFmode,
	-mcpu=power8 for SFmode) don't set the PRE_INCDEC or PRE_MODIFY
	flags.  This restores the settings used before the 2017-07-24.
	Turning off pre increment/decrement/modify allows IVOPTS to
	optimize DF/SF loops where the index is an int.

2018-01-29  Richard Biener  <rguenther@suse.de>
	    Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR bootstrap/80867
	* tree-vect-stmts.c (vectorizable_call): Don't call
	targetm.vectorize_builtin_md_vectorized_function if callee is
	NULL.

2018-01-22  Carl Love  <cel@us.ibm.com>

	* doc/extend.tex: Fix typo in second arg in
	__builtin_bcdadd_{lt|eq|gt|ov} and __builtin_bcdsub_{lt|eq|gt|ov}.

2018-01-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84086
	* tree-ssanames.c: Include cfgloop.h and tree-scalar-evolution.h.
	(flush_ssaname_freelist): When SSA names were released reset
	the SCEV hash table.

2018-01-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84057
	* tree-ssa-loop-ivcanon.c (unloop_loops): Deal with already
	removed paths when removing edges.

2018-01-27  H.J. Lu  <hongjiu.lu@intel.com>

	* doc/invoke.texi: Replace -mfunction-return==@var{choice} with
	-mfunction-return=@var{choice}.

2018-01-27  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR diagnostic/84034
	* diagnostic-show-locus.c (get_line_width_without_trailing_whitespace):
	Handle CR like TAB.
	(layout::print_source_line): Likewise.
	(test_get_line_width_without_trailing_whitespace): Add test cases.

2018-01-27  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/84040
	* sched-deps.c (sched_macro_fuse_insns): Return immediately for
	debug insns.

2018-01-26  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.h (MAX_FIXED_MODE_SIZE): New.

	* config/riscv/elf.h (LIB_SPEC): Don't include -lgloss when nosys.specs
	specified.

2018-01-26  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md: Add peepholes for CMP + SUB -> SUBS
	and CMP + SUB-immediate -> SUBS.

2018-01-26  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83896
	* tree-ssa-strlen.c (get_string_len): Rename...
	(get_string_cst_length): ...to this.  Return HOST_WIDE_INT.
	Avoid assuming length is constant.
	(handle_char_store): Use HOST_WIDE_INT for string length.

2018-01-26  Uros Bizjak  <ubizjak@gmail.com>

	PR target/81763
	* config/i386/i386.md (*andndi3_doubleword): Add earlyclobber
	to (=&r,r,rm) alternative. Add (=r,0,rm) and (=r,r,0) alternatives.

2018-01-26  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/84003
	* dse.c (record_store): Only record redundant stores when
	the earlier store aliases at least all accesses the later one does.

2018-01-26  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/83985
	* dce.c (deletable_insn_p): Return false for separate shrink wrapping
	REG_CFA_RESTORE insns.
	(delete_unmarked_insns): Don't ignore separate shrink wrapping
	REG_CFA_RESTORE insns here.

	PR c/83989
	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Don't
	use SSA_NAME_VAR as base for SSA_NAMEs with non-NULL SSA_NAME_VAR.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-arch.h (arc_tune_attr): Add ARC_TUNE_CORE_3.
	* config/arc/arc.c (arc_sched_issue_rate): Use ARC_TUNE_... .
	(arc_init): Likewise.
	(arc_override_options): Likewise.
	(arc_file_start): Choose Tag_ARC_CPU_variation based on arc_tune
	value.
	(hwloop_fail): Use TARGET_DBNZ when we want to check for dbnz insn
	support.
	* config/arc/arc.h (TARGET_DBNZ): Define.
	* config/arc/arc.md (attr tune): Add core_3, use ARC_TUNE_... to
	properly set the tune attribute.
	(dbnz): Use TARGET_DBNZ guard.
	* config/arc/arc.opt (mtune): Add core3 option.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_delegitimize_address_0): Refactored to
	recognize new pic like addresses.
	(arc_delegitimize_address): Clean up.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-arches.def: Option mrf16 valid for all
	architectures.
	* config/arc/arc-c.def (__ARC_RF16__): New predefined macro.
	* config/arc/arc-cpus.def (em_mini): New cpu with rf16 on.
	* config/arc/arc-options.def (FL_RF16): Add mrf16 option.
	* config/arc/arc-tables.opt: Regenerate.
	* config/arc/arc.c (arc_conditional_register_usage): Handle
	reduced register file case.
	(arc_file_start): Set must have build attributes.
	* config/arc/arc.h (MAX_ARC_PARM_REGS): Conditional define using
	mrf16 option value.
	* config/arc/arc.opt (mrf16): Add new option.
	* config/arc/elf.h (ATTRIBUTE_PCS): Define.
	* config/arc/genmultilib.awk: Handle new mrf16 option.
	* config/arc/linux.h (ATTRIBUTE_PCS): Define.
	* config/arc/t-multilib: Regenerate.
	* doc/invoke.texi (ARC Options): Document mrf16 option.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h: Add arc_is_secure_call_p proto.
	* config/arc/arc.c (arc_handle_secure_attribute): New function.
	(arc_attribute_table): Add 'secure_call' attribute.
	(arc_print_operand): Print secure call operand.
	(arc_function_ok_for_sibcall): Don't optimize tail calls when
	secure.
	(arc_is_secure_call_p): New function.  * config/arc/arc.md
	(call_i): Add support for sjli instruction.
	(call_value_i): Likewise.
	* config/arc/constraints.md (Csc): New constraint.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>
	    John Eric Martin  <John.Martin@emmicro-us.com>

	* config/arc/arc-protos.h: Add arc_is_jli_call_p proto.
	* config/arc/arc.c (_arc_jli_section): New struct.
	(arc_jli_section): New type.
	(rc_jli_sections): New static variable.
	(arc_handle_jli_attribute): New function.
	(arc_attribute_table): Add jli_always and jli_fixed attribute.
	(arc_file_end): New function.
	(TARGET_ASM_FILE_END): Define.
	(arc_print_operand): Reuse 'S' letter for JLI output instruction.
	(arc_add_jli_section): New function.
	(jli_call_scan): Likewise.
	(arc_reorg): Call jli_call_scan.
	(arc_output_addsi): Remove 'S' from printing asm operand.
	(arc_is_jli_call_p): New function.
	* config/arc/arc.md (movqi_insn): Remove 'S' from printing asm
	operand.
	(movhi_insn): Likewise.
	(movsi_insn): Likewise.
	(movsi_set_cc_insn): Likewise.
	(loadqi_update): Likewise.
	(load_zeroextendqisi_update): Likewise.
	(load_signextendqisi_update): Likewise.
	(loadhi_update): Likewise.
	(load_zeroextendhisi_update): Likewise.
	(load_signextendhisi_update): Likewise.
	(loadsi_update): Likewise.
	(loadsf_update): Likewise.
	(movsicc_insn): Likewise.
	(bset_insn): Likewise.
	(bxor_insn): Likewise.
	(bclr_insn): Likewise.
	(bmsk_insn): Likewise.
	(bicsi3_insn): Likewise.
	(cmpsi_cc_c_insn): Likewise.
	(movsi_ne): Likewise.
	(movsi_cond_exec): Likewise.
	(clrsbsi2): Likewise.
	(norm_f): Likewise.
	(normw): Likewise.
	(swap): Likewise.
	(divaw): Likewise.
	(flag): Likewise.
	(sr): Likewise.
	(kflag): Likewise.
	(ffs): Likewise.
	(ffs_f): Likewise.
	(fls): Likewise.
	(call_i): Remove 'S' asm letter, add jli instruction.
	(call_value_i): Likewise.
	* config/arc/arc.op (mjli-always): New option.
	* config/arc/constraints.md (Cji): New constraint.
	* config/arc/fpx.md (addsf3_fpx): Remove 'S' from printing asm
	operand.
	(subsf3_fpx): Likewise.
	(mulsf3_fpx): Likewise.
	* config/arc/simdext.md (vendrec_insn): Remove 'S' from printing
	asm operand.
	* doc/extend.texi (ARC): Document 'jli-always' and 'jli-fixed'
	function attrbutes.
	* doc/invoke.texi (ARC): Document mjli-always option.

2018-01-26  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.c (rl78_addsi3_internal): If operand 2 is const 
	avoid addition with 0 and use incw and decw where possible.

2018-01-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/81082
	* fold-const.c (fold_plusminus_mult_expr): Do not perform the
	association if it requires casting to unsigned.
	* match.pd ((A * C) +- (B * C) -> (A+-B)): New patterns derived
	from fold_plusminus_mult_expr to catch important cases late when
	range info is available.

2018-01-26  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/i386/sol2.h (USE_HIDDEN_LINKONCE): Remove.
	* configure.ac (hidden_linkonce): New test.
	* configure: Regenerate.
	* config.in: Regenerate.

2018-01-26  Julia Koval  <julia.koval@intel.com>

	* config/i386/avx512bitalgintrin.h (_mm512_bitshuffle_epi64_mask,
	_mm512_mask_bitshuffle_epi64_mask, _mm256_bitshuffle_epi64_mask,
	_mm256_mask_bitshuffle_epi64_mask, _mm_bitshuffle_epi64_mask,
	_mm_mask_bitshuffle_epi64_mask): Fix type.
	* config/i386/i386-builtin-types.def (UHI_FTYPE_V2DI_V2DI_UHI,
	USI_FTYPE_V4DI_V4DI_USI): Remove.
	* config/i386/i386-builtin.def (__builtin_ia32_vpshufbitqmb512_mask,
	__builtin_ia32_vpshufbitqmb256_mask,
	__builtin_ia32_vpshufbitqmb128_mask): Fix types.
	* config/i386/i386.c (ix86_expand_args_builtin): Remove old types.
	* config/i386/sse.md (VI1_AVX512VLBW): Change types.

2018-01-26  Alan Modra  <amodra@gmail.com>

	PR target/84033
	* config/rs6000/rs6000-p8swap.c (rtx_is_swappable_p): Exclude
	UNSPEC_VBPERMQ.  Sort other unspecs.

2018-01-25  David Edelsohn  <dje.gcc@gmail.com>

	* doc/invoke.texi (PowerPC Options): Document 'native' cpu type.

2018-01-25  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83055
	* predict.c (drop_profile): Do not push/pop cfun; update also
	node->count.
	(handle_missing_profiles): Fix logic looking for zero profiles.

2018-01-25  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83977
	* ipa-fnsummary.c (compute_fn_summary): Clear can_change_signature
	on functions with #pragma omp declare simd or functions with simd
	attribute.
	* omp-simd-clone.c (expand_simd_clones): Revert 2018-01-24 change.
	* config/i386/i386.c (ix86_simd_clone_compute_vecsize_and_simdlen):
	Remove trailing \n from warning_at calls.

2018-01-25  Tom de Vries  <tom@codesourcery.com>

	PR target/84028
	* config/nvptx/nvptx.c (nvptx_single): Add exit insn after noreturn call
	for neutered workers.

2018-01-24  Joseph Myers  <joseph@codesourcery.com>

	PR target/68467
	* config/m68k/m68k.c (m68k_promote_function_mode): New function.
	(TARGET_PROMOTE_FUNCTION_MODE): New macro.

2018-01-24  Jeff Law  <law@redhat.com>

	PR target/83994
	* i386.c (get_probe_interval): Move to earlier point.
	(ix86_compute_frame_layout): If -fstack-clash-protection and
	the frame is larger than the probe interval, then use pushes
	to save registers rather than reg->mem moves.
	(ix86_expand_prologue): Remove conditional for int_registers_saved
	assertion.

2018-01-24  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/84014
	* ira-build.c (setup_min_max_allocno_live_range_point): Set up
	min/max for never referenced object.

2018-01-24  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83977
	* tree.c (free_lang_data_in_decl): Don't clear DECL_ABSTRACT_ORIGIN
	here.
	* omp-low.c (create_omp_child_function): Remove "omp declare simd"
	attributes from DECL_ATTRIBUTES (decl) without affecting
	DECL_ATTRIBUTES (current_function_decl).
	* omp-simd-clone.c (expand_simd_clones): Ignore DECL_ARTIFICIAL
	functions with non-NULL DECL_ABSTRACT_ORIGIN.

2018-01-24  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83979
	* fold-const.c (fold_comparison): Use constant_boolean_node
	instead of boolean_{true,false}_node.

2018-01-24  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-profile.c (ipa_propagate_frequency_1): Fix logic skipping calls
	with zero counts.

2018-01-24  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (*call_indirect_nonlocal_sysv<mode>):
	Simplify the clause that sets the length attribute.
	(*call_value_indirect_nonlocal_sysv<mode>): Likewise.
	(*sibcall_nonlocal_sysv<mode>): Clean up code block; simplify the
	clause that sets the length attribute.
	(*sibcall_value_nonlocal_sysv<mode>): Likewise.

2018-01-24  Tom de Vries  <tom@codesourcery.com>

	PR target/83589
	* config/nvptx/nvptx.c (WORKAROUND_PTXJIT_BUG_2): Define to 1.
	(nvptx_pc_set, nvptx_condjump_label): New function. Copy from jump.c.
	Add strict parameter.
	(prevent_branch_around_nothing): Insert dummy insn between branch to
	label and label with no ptx insn inbetween.
	* config/nvptx/nvptx.md (define_insn "fake_nop"): New insn.

2018-01-24  Tom de Vries  <tom@codesourcery.com>

	PR target/81352
	* config/nvptx/nvptx.c (nvptx_single): Add exit insn after noreturn call
	for neutered threads in warp.
	* config/nvptx/nvptx.md (define_insn "exit"): New insn.

2018-01-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83176
	* tree-chrec.c (chrec_fold_plus_1): Handle (signed T){(T) .. }
	operands.

2018-01-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/82819
	* graphite-isl-ast-to-gimple.c (binary_op_to_tree): Avoid
	code generating pluses that are no-ops in the target precision.

2018-01-24  Richard Biener  <rguenther@suse.de>

	PR middle-end/84000
	* tree-cfg.c (replace_loop_annotate): Handle annot_expr_parallel_kind.

2018-01-23  Jan Hubicka  <hubicka@ucw.cz>

	* cfgcleanup.c (try_crossjump_to_edge): Use combine_with_count
	to merge probabilities.
	* predict.c (probably_never_executed): Also mark as cold functions
	with global 0 profile and guessed local profile.
	* profile-count.c (profile_probability::combine_with_count): New
	member function.
	* profile-count.h (profile_probability::operator*,
	profile_probability::operator*=, profile_probability::operator/,
	profile_probability::operator/=): Reduce precision to adjusted
	and set value to guessed on contradictory divisions.
	(profile_probability::combine_with_freq): Remove.
	(profile_probability::combine_wiht_count): Declare.
	(profile_count::force_nonzero):: Set to adjusted.
	(profile_count::probability_in):: Set quality to adjusted.
	* tree-ssa-tail-merge.c (replace_block_by): Use
	combine_with_count.

2018-01-23  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_stack_boundary): New.
	(riscv_option_override): Set riscv_stack_boundary.  Handle
	riscv_preferred_stack_boundary_arg.
	* config/riscv/riscv.h (MIN_STACK_BOUNDARY, ABI_STACK_BOUNDARY): New.
	(BIGGEST_ALIGNMENT): Set to STACK_BOUNDARY.
	(STACK_BOUNDARY): Set to riscv_stack_boundary.
	(RISCV_STACK_ALIGN): Use STACK_BOUNDARY.
	* config/riscv/riscv.opt (mpreferred-stack-boundary): New.
	* doc/invoke.tex (RISC-V Options): Add -mpreferred-stack-boundary.

2018-01-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83905
	* config/i386/i386.c (ix86_expand_prologue): Use cost reference
	of struct ix86_frame.
	(ix86_expand_epilogue): Likewise.  Add a local variable for
	the reg_save_offset field in struct ix86_frame.

2018-01-23  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/82604
	* tree-loop-distribution.c (enum partition_kind): New enum item
	PKIND_PARTIAL_MEMSET.
	(partition_builtin_p): Support above new enum item.
	(generate_code_for_partition): Ditto.
	(compute_access_range): Differentiate cases that equality can be
	proven at all loops, the innermost loops or no loops.
	(classify_builtin_st, classify_builtin_ldst): Adjust call to above
	function.  Set PKIND_PARTIAL_MEMSET for partition appropriately.
	(finalize_partitions, distribute_loop): Don't fuse partition of
	PKIND_PARTIAL_MEMSET kind when distributing 3-level loop nest.
	(prepare_perfect_loop_nest): Distribute 3-level loop nest only if
	parloop is enabled.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* predict.def (PRED_INDIR_CALL): Set probability to PROB_EVEN in
	order to ignore the predictor.
	(PRED_POLYMORPHIC_CALL): Likewise.
	(PRED_RECURSIVE_CALL): Likewise.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* tree-profile.c (tree_profiling): Print function header to
	aware reader which function we are working on.
	* value-prof.c (gimple_find_values_to_profile): Do not print
	not interesting value histograms.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* profile-count.h (enum profile_quality): Add
	profile_uninitialized as the first value. Do not number values
	as they are zero based.
	(profile_count::verify): Update sanity check.
	(profile_probability::verify): Likewise.

2018-01-23  Nathan Sidwell  <nathan@acm.org>

	* doc/invoke.texi (ffor-scope): Deprecate.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/83510
	* domwalk.c (set_all_edges_as_executable): New function.
	(dom_walker::dom_walker): Convert bool param
	"skip_unreachable_blocks" to enum reachability.  Move setup of
	edge flags to set_all_edges_as_executable and only do it when
	reachability is REACHABLE_BLOCKS.
	* domwalk.h (enum dom_walker::reachability): New enum.
	(dom_walker::dom_walker): Convert bool param
	"skip_unreachable_blocks" to enum reachability.
	(set_all_edges_as_executable): New decl.
	* graphite-scop-detection.c  (gather_bbs::gather_bbs): Convert
	from false for "skip_unreachable_blocks" to ALL_BLOCKS for
	"reachability".
	* tree-ssa-dom.c (dom_opt_dom_walker::dom_opt_dom_walker): Likewise,
	but converting true to REACHABLE_BLOCKS.
	* tree-ssa-sccvn.c (sccvn_dom_walker::sccvn_dom_walker): Likewise.
	* tree-vrp.c
	(check_array_bounds_dom_walker::check_array_bounds_dom_walker):
	Likewise, but converting it to REACHABLE_BLOCKS_PRESERVING_FLAGS.
	(vrp_dom_walker::vrp_dom_walker): Likewise, but converting it to
	REACHABLE_BLOCKS.
	(vrp_prop::vrp_finalize): Call set_all_edges_as_executable
	if check_all_array_refs will be called.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	* tree.c (selftest::test_location_wrappers): Add more test
	coverage.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	* sbitmap.c (selftest::test_set_range): Fix memory leaks.
	(selftest::test_bit_in_range): Likewise.

2018-01-23  Richard Sandiford  <richard.sandiford@linaro.org>

	PR testsuite/83888
	* doc/sourcebuild.texi (vect_float): Say that the selector
	only describes the situation when -funsafe-math-optimizations is on.
	(vect_float_strict): Document.

2018-01-23  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83965
	* tree-vect-patterns.c (vect_reassociating_reduction_p): New function.
	(vect_recog_dot_prod_pattern, vect_recog_sad_pattern): Use it
	instead of checking only for a reduction.
	(vect_recog_widen_sum_pattern): Likewise.

2018-01-23  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (probably_never_executed): Only use precise profile info.
	(compute_function_frequency): Skip after inlining hack since we now
	have quality checking.

2018-01-23  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.h (profile_probability::very_unlikely,
	profile_probability::unlikely, profile_probability::even): Set
	precision to guessed.

2018-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83963
	* graphite-scop-detection.c (scop_detection::harmful_loop_in_region):
	Properly terminate dominator walk when crossing the exit edge not
	when visiting its source block.

2018-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR c++/83918
	* tree.c (maybe_wrap_with_location): Use NON_LVALUE_EXPR rather than
	VIEW_CONVERT_EXPR to wrap CONST_DECLs.

2018-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83957
	* omp-expand.c (expand_omp_for_generic): Ignore virtual PHIs.  Remove
	semicolon after for body surrounded by braces.

	PR tree-optimization/83081
	* profile-count.h (profile_probability::split): New method.
	* dojump.c (do_jump_1) <case TRUTH_ANDIF_EXPR, case TRUTH_ORIF_EXPR>:
	Use profile_probability::split.
	(do_compare_rtx_and_jump): Fix adjustment of probabilities
	when splitting a single conditional jump into 2.

2018-01-22  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/69452
	* tree-ssa-loop-im.c (class move_computations_dom_walker): Remove
	decl.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78-expand.md (bswaphi2): New define_expand.
	* config/rl78/rl78-virt.md (*bswaphi2_virt): New define_insn.
	* config/rl78/rl78-real.md (*bswaphi2_real): New define_insn.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78-protos.h (rl78_split_movdi): New function declaration.
	* config/rl78/rl78.md (movdi): New define_expand.
	* config/rl78/rl78.c (rl78_split_movdi): New function.

2018-01-22  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/83862
	* config/rs6000/rs6000-protos.h (rs6000_split_signbit): Delete,
	no longer used.
	* config/rs6000/rs6000.c (rs6000_split_signbit): Likewise.
	* config/rs6000/rs6000.md (signbit<mode>2): Change code for IEEE
	128-bit to produce an UNSPEC move to get the double word with the
	signbit and then a shift directly to do signbit.
	(signbit<mode>2_dm): Replace old IEEE 128-bit signbit
	implementation with a new version that just does either a direct
	move or a regular move.  Move memory interface to separate insns.
	Move insns so they are next to the expander.
	(signbit<mode>2_dm_mem_be): New combiner insns to combine load
	with signbit move.  Split big and little endian case.
	(signbit<mode>2_dm_mem_le): Likewise.
	(signbit<mode>2_dm_<su>ext): Delete, no longer used.
	(signbit<mode>2_dm2): Likewise.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (anddi3): New define_expand.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (umindi3): New define_expand.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (smindi3): New define_expand.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (smaxdi3): New define_expand.

2018-01-22  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def (ST_ELEMREV_V1TI, LD_ELEMREV_V1TI,
	LVX_V1TI): Add macro expansion.
	* config/rs6000/rs6000-c.c (altivec_builtin_types): Add argument
	definitions for VSX_BUILTIN_VEC_XST_BE, VSX_BUILTIN_VEC_ST,
	VSX_BUILTIN_VEC_XL, LD_ELEMREV_V1TI builtins.
	* config/rs6000/rs6000-p8swap.c (insn_is_swappable_p);
	Change check to determine if the instruction is a byte reversing
	entry.  Fix typo in comment.
	* config/rs6000/rs6000.c (altivec_expand_builtin): Add case entry
	for VSX_BUILTIN_ST_ELEMREV_V1TI and VSX_BUILTIN_LD_ELEMREV_V1TI.
	Add def_builtin calls for new builtins.
	* config/rs6000/vsx.md (vsx_st_elemrev_v1ti, vsx_ld_elemrev_v1ti):
	Add define_insn expansion.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (umaxdi3): New define_expand.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.c (rl78_note_reg_set): Fixed dead reg check
	for non-QImode registers.

2018-01-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83963
	* graphite-scop-detection.c (scop_detection::get_sese): Delay
	including the loop exit block.
	(scop_detection::merge_sese): Likewise.
	(scop_detection::add_scop): Do it here instead.

2018-01-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* doc/sourcebuild.texi (arm_softfloat): Document.

2018-01-21  John David Anglin  <danglin@gcc.gnu.org>

	PR gcc/77734
	* config/pa/pa.c (pa_function_ok_for_sibcall): Use
	targetm.binds_local_p instead of TREE_PUBLIC to check local binding.
	Move TARGET_PORTABLE_RUNTIME check after TARGET_64BIT check.

2018-01-21  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>
	    David Edelsohn  <dje.gcc@gmail.com>

	PR target/83946
	* config/rs6000/rs6000.md (*call_indirect_nonlocal_sysv<mode>):
	Change "crset eq" to "crset 2".
	(*call_value_indirect_nonlocal_sysv<mode>): Likewise.
	(*call_indirect_aix<mode>_nospec): Likewise.
	(*call_value_indirect_aix<mode>_nospec): Likewise.
	(*call_indirect_elfv2<mode>_nospec): Likewise.
	(*call_value_indirect_elfv2<mode>_nospec): Likewise.
	(*sibcall_nonlocal_sysv<mode>): Change "crset eq" to "crset 2";
	change assembly output from . to $.
	(*sibcall_value_nonlocal_sysv<mode>): Likewise.
	(indirect_jump<mode>_nospec): Change assembly output from . to $.
	(*tablejump<mode>_internal1_nospec): Likewise.

2018-01-21  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/80870
	* config/sh/sh_optimize_sett_clrt.cc:
	Use INCLUDE_ALGORITHM and INCLUDE_VECTOR instead of direct includes.

2018-01-20  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83940
	* tree-vect-stmts.c (vect_truncate_gather_scatter_offset): Set
	offset_dt to vect_constant_def rather than vect_unknown_def_type.
	(vect_check_load_store_mask): Add a mask_dt_out parameter and
	use it to pass back the definition type.
	(vect_check_store_rhs): Likewise rhs_dt_out.
	(vect_build_gather_load_calls): Add a mask_dt argument and use
	it instead of a call to vect_is_simple_use.
	(vectorizable_store): Update calls to vect_check_load_store_mask
	and vect_check_store_rhs.  Use the dt returned by the latter instead
	of scatter_src_dt.  Use the cached mask_dt and gs_info.offset_dt
	instead of calls to vect_is_simple_use.  Pass the scalar rather
	than the vector operand to vect_is_simple_use when handling
	second and subsequent copies of an rhs value.
	(vectorizable_load): Update calls to vect_check_load_store_mask
	and vect_build_gather_load_calls.  Use the cached mask_dt and
	gs_info.offset_dt instead of calls to vect_is_simple_use.

2018-01-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83945
	* tree-emutls.c: Include gimplify.h.
	(lower_emutls_2): New function.
	(lower_emutls_1): If ADDR_EXPR is a gimple invariant and walk_tree
	with lower_emutls_2 callback finds some TLS decl in it, unshare_expr
	it before further processing.

	PR target/83930
	* simplify-rtx.c (simplify_binary_operation_1) <case UMOD>: Use
	UINTVAL (trueop1) instead of INTVAL (op1).

2018-01-19  Jakub Jelinek  <jakub@redhat.com>

	PR debug/81570
	PR debug/83728
	* dwarf2cfi.c (DEFAULT_INCOMING_FRAME_SP_OFFSET): Define to
	INCOMING_FRAME_SP_OFFSET if not defined.
	(scan_trace): Add ENTRY argument.  If true and
	DEFAULT_INCOMING_FRAME_SP_OFFSET != INCOMING_FRAME_SP_OFFSET,
	emit a note to adjust the CFA offset.
	(create_cfi_notes): Adjust scan_trace callers.
	(create_cie_data): Use DEFAULT_INCOMING_FRAME_SP_OFFSET rather than
	INCOMING_FRAME_SP_OFFSET in the CIE.
	* config/i386/i386.h (DEFAULT_INCOMING_FRAME_SP_OFFSET): Define.
	* config/stormy16/stormy16.h (DEFAULT_INCOMING_FRAME_SP_OFFSET):
	Likewise.
	* doc/tm.texi.in (DEFAULT_INCOMING_FRAME_SP_OFFSET): Document.
	* doc/tm.texi: Regenerated.

2018-01-19  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	PR rtl-optimization/83147
	* lra-constraints.c (remove_inheritance_pseudos): Use
	lra_substitute_pseudo_within_insn.

2018-01-19  Tom de Vries  <tom@codesourcery.com>
	    Cesar Philippidis  <cesar@codesourcery.com>

	PR target/83920
	* config/nvptx/nvptx.c (nvptx_single): Fix jit workaround.

2018-01-19  Cesar Philippidis  <cesar@codesourcery.com>

	PR target/83790
	* config/nvptx/nvptx.c (output_init_frag): Don't use generic address
	spaces for function labels.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.def (PRED_LOOP_EXIT): Change from 85 to 89.
	(PRED_LOOP_EXIT_WITH_RECURSION): Change from 72 to 78.
	(PRED_LOOP_EXTRA_EXIT): Change from 83 to 67.
	(PRED_OPCODE_POSITIVE): Change from 64 to 59.
	(PRED_TREE_OPCODE_POSITIVE): Change from 64 to 59.
	(PRED_CONST_RETURN): Change from 69 to 65.
	(PRED_NULL_RETURN): Change from 91 to 71.
	(PRED_LOOP_IV_COMPARE_GUESS): Change from 98 to 64.
	(PRED_LOOP_GUARD): Change from 66 to 73.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.c (predict_insn_def): Add new assert.
	(struct branch_predictor): Change type to signed integer.
	(test_prediction_value_range): Amend test to cover
	PROB_UNINITIALIZED.
	* predict.def (PRED_LOOP_ITERATIONS): Use the new constant.
	(PRED_LOOP_ITERATIONS_GUESSED): Likewise.
	(PRED_LOOP_ITERATIONS_MAX): Likewise.
	(PRED_LOOP_IV_COMPARE): Likewise.
	* predict.h (PROB_UNINITIALIZED): Define new constant.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.c (dump_prediction): Add new format for
	analyze_brprob.py script which is enabled with -details
	suboption.
	* profile-count.h (precise_p): New function.

2018-01-19  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83922
	* tree-vect-loop.c (vect_verify_full_masking): Return false if
	there are no statements that need masking.
	(vect_active_double_reduction_p): New function.
	(vect_analyze_loop_operations): Use it when handling phis that
	are not in the loop header.

2018-01-19  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83914
	* tree-vect-loop.c (vectorizable_induction): Don't convert
	init_expr or apply the peeling adjustment for inductions
	that are nested within the vectorized loop.

2018-01-19  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/thumb2.md (*thumb2_negsi2_short): Use RSB mnemonic
	instead of NEG.

2018-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/81715
	PR testsuite/83882
	* function.h (gimplify_parameters): Add gimple_seq * argument.
	* function.c: Include gimple.h and options.h.
	(gimplify_parameters): Add cleanup argument, add CLOBBER stmts
	for the added local temporaries if needed.
	* gimplify.c (gimplify_body): Adjust gimplify_parameters caller,
	if there are any parameter cleanups, wrap whole body into a
	try/finally with the cleanups.

2018-01-18  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/82964
	* config/aarch64/aarch64.c (aarch64_legitimate_constant_p):
	Use GET_MODE_CLASS for scalar floating point.

2018-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/82256
	patch by PaX Team
	* cgraphclones.c (cgraph_node::create_version_clone_with_body):
	Fix call of call_cgraph_insertion_hooks.

2018-01-18  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wclass-memaccess): Tweak text.

2018-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83619
	* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Update edge
	frequencies.

2018-01-18  Boris Kolpackov  <boris@codesynthesis.com>

	PR other/70268
	* common.opt: (-ffile-prefix-map): New option.
	* opts.c (common_handle_option): Defer it.
	* opts-global.c (handle_common_deferred_options): Handle it.
	* debug.h (remap_debug_filename, add_debug_prefix_map): Move to...
	* file-prefix-map.h: New file.
	(remap_debug_filename, add_debug_prefix_map): ...here.
	(add_macro_prefix_map, add_file_prefix_map, remap_macro_filename): New.
	* final.c (debug_prefix_map, add_debug_prefix_map
	remap_debug_filename): Move to...
	* file-prefix-map.c: New file.
	(file_prefix_map, add_prefix_map, remap_filename) ...here and rename,
	generalize, get rid of alloca(), use strrchr() instead of strchr().
	(add_macro_prefix_map, add_debug_prefix_map, add_file_prefix_map):
	Implement in terms of add_prefix_map().
	(remap_macro_filename, remap_debug_filename): Implement in term of
	remap_filename().
	* Makefile.in (OBJS, PLUGIN_HEADERS): Add new files.
	* builtins.c (fold_builtin_FILE): Call remap_macro_filename().
	* dbxout.c: Include file-prefix-map.h.
	* varasm.c: Likewise.
	* vmsdbgout.c: Likewise.
	* xcoffout.c: Likewise.
	* dwarf2out.c: Likewise plus omit new options from DW_AT_producer.
	* doc/cppopts.texi (-fmacro-prefix-map): Document.
	* doc/invoke.texi (-ffile-prefix-map): Document.
	(-fdebug-prefix-map): Update description.

2018-01-18  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (indirect_thunk_name): Document that also
	lfence is emitted.
	(output_indirect_thunk): Document why both instructions
	(pause and lfence) are generated.

2018-01-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83887
	* graphite-scop-detection.c
	(scop_detection::get_nearest_dom_with_single_entry): Remove.
	(scop_detection::get_nearest_pdom_with_single_exit): Likewise.
	(scop_detection::merge_sese): Re-implement with a flood-fill
	algorithm that properly finds a SESE region if it exists.

2018-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR c/61240
	* match.pd ((P + A) - P, P - (P + A), (P + A) - (P + B)): For
	pointer_diff optimizations use view_convert instead of convert.

2018-01-17  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (*call_indirect_nonlocal_sysv<mode>):
	Generate different code for -mno-speculate-indirect-jumps.
	(*call_value_indirect_nonlocal_sysv<mode>): Likewise.
	(*call_indirect_aix<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_indirect_aix<mode>_nospec): New define_insn.
	(*call_value_indirect_aix<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_value_indirect_aix<mode>_nospec): New define_insn.
	(*sibcall_nonlocal_sysv<mode>): Generate different code for
	-mno-speculate-indirect-jumps.
	(*sibcall_value_nonlocal_sysv<mode>): Likewise.

2018-01-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_emit_move): If we load or store a
	long double type, set the flags for noting the default long double
	type, even if we don't pass or return a long double type.

2018-01-17  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83051
	* ipa-inline.c (flatten_function): Do not overwrite final inlining
	failure.

2018-01-17  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_gimple_builtin): Add gimple folding
	support for merge[hl].
	(fold_mergehl_helper): New helper function.
	(tree-vector-builder.h): New #include for tree_vector_builder usage.
	* config/rs6000/altivec.md (altivec_vmrghw_direct): Add xxmrghw insn.
	(altivec_vmrglw_direct): Add xxmrglw insn.

2018-01-17  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/riscv.c (riscv_conditional_register_usage): If
	UNITS_PER_FP_ARG is 0, set call_used_regs to 1 for all FP regs.

2018-01-17  David Malcolm  <dmalcolm@redhat.com>

	PR lto/83121
	* ipa-devirt.c (add_type_duplicate): When comparing memory layout,
	call the lto_location_cache before reading the
	DECL_SOURCE_LOCATION of the types.

2018-01-17  Wilco Dijkstra  <wdijkstr@arm.com>
	    Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.md (movti_aarch64): Use Uti constraint.
	* config/aarch64/aarch64.c (aarch64_mov128_immediate): New function.
	(aarch64_legitimate_constant_p): Just support CONST_DOUBLE
	SF/DF/TF mode to avoid creating illegal CONST_WIDE_INT immediates.
	* config/aarch64/aarch64-protos.h (aarch64_mov128_immediate):
	Add declaration.
	* config/aarch64/constraints.md (aarch64_movti_operand):
	Limit immediates.
	* config/aarch64/predicates.md (Uti): Add new constraint.

2018-01-17 Carl Love  <cel@us.ibm.com>

	* config/rs6000/vsx.md (define_expand xl_len_r,
	define_expand stxvl, define_expand *stxvl): Add match_dup argument.
	(define_insn): Add, match_dup 1 argument to define_insn stxvll and
	lxvll.
	(define_expand, define_insn): Move the shift left from	the
	define_insn to the define_expand for lxvl and stxvl instructions.
	* config/rs6000/rs6000-builtin.def (BU_P9V_64BIT_VSX_2): Change LXVL
	and XL_LEN_R definitions to PURE.

2018-01-17  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (indirect_thunk_name): Declare regno
	as unsigned int.  Compare regno with INVALID_REGNUM.
	(output_indirect_thunk): Ditto.
	(output_indirect_thunk_function): Ditto.
	(ix86_code_end): Declare regno as unsigned int.  Use INVALID_REGNUM
	in the call to output_indirect_thunk_function.

2018-01-17  Richard Sandiford  <richard.sandiford@linaro.org>

	PR middle-end/83884
	* expr.c (expand_expr_real_1): Use the size of GET_MODE (op0)
	rather than the size of inner_type to determine the stack slot size
	when handling VIEW_CONVERT_EXPRs on strict-alignment targets.

2018-01-16  Sebastian Peryt  <sebastian.peryt@intel.com>

	PR target/83546
	* config/i386/i386.c (ix86_option_override_internal): Add PTA_RDRND
	to PTA_SILVERMONT.

2018-01-16  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config.gcc (powerpc*-linux*-*): Add support for 64-bit little
	endian Linux systems to optionally enable multilibs for selecting
	the long double type if the user configured an explicit type.
	* config/rs6000/rs6000.h (TARGET_IEEEQUAD_MULTILIB): Indicate we
	have no long double multilibs if not defined.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Do not
	warn if the user used -mabi={ieee,ibm}longdouble and we built
	multilibs for long double.
	* config/rs6000/linux64.h (MULTILIB_DEFAULTS_IEEE): Define as the
	appropriate multilib option.
	(MULTILIB_DEFAULTS): Add MULTILIB_DEFAULTS_IEEE to the default
	multilib options.
	* config/rs6000/t-ldouble-linux64le-ibm: New configuration files
	for building long double multilibs.
	* config/rs6000/t-ldouble-linux64le-ieee: Likewise.

2018-01-16  John David Anglin  <danglin@gcc.gnu.org>

	* config.gcc (hppa*-*-linux*): Change callee copies ABI to caller
	copies.

	* config/pa.h (MALLOC_ABI_ALIGNMENT): Set 32-bit alignment default to
	64 bits.
	* config/pa/pa32-linux.h (MALLOC_ABI_ALIGNMENT): Set alignment to
	128 bits.

	* config/pa/som.h (ASM_DECLARE_FUNCTION_NAME): Cleanup type and mode
	variables.

	* config/pa/pa.c (pa_function_arg_size): Apply CEIL to GET_MODE_SIZE
	return value.

2018-01-16  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): For an
	ADDR_EXPR, do not count the offset of a COMPONENT_REF twice.

2018-01-16  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-p8swap.c (rs6000_gen_stvx): Generate
	different rtl trees depending on TARGET_64BIT.
	(rs6000_gen_lvx): Likewise.

2018-01-16  Eric Botcazou  <ebotcazou@adacore.com>

	* config/visium/visium.md (nop): Tweak comment.
	(hazard_nop): Likewise.

2018-01-16  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_opt_vars): Add entry for
	-mspeculate-indirect-jumps.
	* config/rs6000/rs6000.md (*call_indirect_elfv2<mode>): Disable
	for -mno-speculate-indirect-jumps.
	(*call_indirect_elfv2<mode>_nospec): New define_insn.
	(*call_value_indirect_elfv2<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_value_indirect_elfv2<mode>_nospec): New define_insn.
	(indirect_jump): Emit different RTL for
	-mno-speculate-indirect-jumps.
	(*indirect_jump<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*indirect_jump<mode>_nospec): New define_insn.
	(tablejump): Emit different RTL for
	-mno-speculate-indirect-jumps.
	(tablejumpsi): Disable for -mno-speculate-indirect-jumps.
	(tablejumpsi_nospec): New define_expand.
	(tablejumpdi): Disable for -mno-speculate-indirect-jumps.
	(tablejumpdi_nospec): New define_expand.
	(*tablejump<mode>_internal1): Disable for
	-mno-speculate-indirect-jumps.
	(*tablejump<mode>_internal1_nospec): New define_insn.
	* config/rs6000/rs6000.opt (mspeculate-indirect-jumps): New
	option.

2018-01-16  Artyom Skrobov tyomitch@gmail.com

	* caller-save.c (insert_save): Drop unnecessary parameter.  All
	callers updated.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenth@suse.de>

	PR libgomp/83590
	* gimplify.c (gimplify_one_sizepos): For is_gimple_constant (expr)
	return early, inline manually is_gimple_sizepos.  Make sure if we
	call gimplify_expr we don't end up with a gimple constant.
	* tree.c (variably_modified_type_p): Don't return true for
	is_gimple_constant (_t).  Inline manually is_gimple_sizepos.
	* gimplify.h (is_gimple_sizepos): Remove.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83857
	* tree-vect-loop.c (vect_analyze_loop_operations): Don't call
	vectorizable_live_operation for pure SLP statements.
	(vectorizable_live_operation): Handle PHIs.

2018-01-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83867
	* tree-vect-stmts.c (vect_transform_stmt): Precompute
	nested_in_vect_loop_p since the scalar stmt may get invalidated.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>

	PR c/83844
	* stor-layout.c (handle_warn_if_not_align): Use byte_position and
	multiple_of_p instead of unchecked tree_to_uhwi and UHWI check.
	If off is not INTEGER_CST, issue a may not be aligned warning
	rather than isn't aligned.  Use isn%'t rather than isn't.
	* fold-const.c (multiple_of_p) <case BIT_AND_EXPR>: Don't fall through
	into MULT_EXPR.
	<case MULT_EXPR>: Improve the case when bottom and one of the
	MULT_EXPR operands are INTEGER_CSTs and bottom is multiple of that
	operand, in that case check if the other operand is multiple of
	bottom divided by the INTEGER_CST operand.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83858
	* config/pa/pa.h (FUNCTION_ARG_SIZE): Delete.
	* config/pa/pa-protos.h (pa_function_arg_size): Declare.
	* config/pa/som.h (ASM_DECLARE_FUNCTION_NAME): Use
	pa_function_arg_size instead of FUNCTION_ARG_SIZE.
	* config/pa/pa.c (pa_function_arg_advance): Likewise.
	(pa_function_arg, pa_arg_partial_bytes): Likewise.
	(pa_function_arg_size): New function.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	* fold-const.c (fold_ternary_loc): Construct the vec_perm_indices
	in a separate statement.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83847
	* tree-vect-data-refs.c (vect_analyze_data_ref_accesses): Don't
	group gathers and scatters.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/86620
	* params.def (max-sched-ready-insns): Bump minimum value to 1.

	PR rtl-optimization/83213
	* recog.c (peep2_attempt): Copy over CROSSING_JUMP_P from peepinsn
	to last if both are JUMP_INSNs.

	PR tree-optimization/83843
	* gimple-ssa-store-merging.c
	(imm_store_chain_info::output_merged_store): Handle bit_not_p on
	store_immediate_info for bswap/nop orig_stores.

2018-01-15  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/riscv.c (riscv_rtx_costs) <MULT>: Increase cost if
	!TARGET_MUL.
	<UDIV>: Increase cost if !TARGET_DIV.

2018-01-15  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_attr "type"): Remove delayed_cr.
	(define_attr "cr_logical_3op"): New.
	(cceq_ior_compare): Adjust.
	(cceq_ior_compare_complement): Adjust.
	(*cceq_rev_compare): Adjust.
	* config/rs6000/rs6000.c (rs6000_adjust_cost): Adjust.
	(is_cracked_insn): Adjust.
	(insn_must_be_first_in_group): Adjust.
	* config/rs6000/40x.md: Adjust.
	* config/rs6000/440.md: Adjust.
	* config/rs6000/476.md: Adjust.
	* config/rs6000/601.md: Adjust.
	* config/rs6000/603.md: Adjust.
	* config/rs6000/6xx.md: Adjust.
	* config/rs6000/7450.md: Adjust.
	* config/rs6000/7xx.md: Adjust.
	* config/rs6000/8540.md: Adjust.
	* config/rs6000/cell.md: Adjust.
	* config/rs6000/e300c2c3.md: Adjust.
	* config/rs6000/e500mc.md: Adjust.
	* config/rs6000/e500mc64.md: Adjust.
	* config/rs6000/e5500.md: Adjust.
	* config/rs6000/e6500.md: Adjust.
	* config/rs6000/mpc.md: Adjust.
	* config/rs6000/power4.md: Adjust.
	* config/rs6000/power5.md: Adjust.
	* config/rs6000/power6.md: Adjust.
	* config/rs6000/power7.md: Adjust.
	* config/rs6000/power8.md: Adjust.
	* config/rs6000/power9.md: Adjust.
	* config/rs6000/rs64.md: Adjust.
	* config/rs6000/titan.md: Adjust.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/predicates.md (indirect_branch_operand): Rewrite
	ix86_indirect_branch_register logic.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Update
	ix86_indirect_branch_register check.  Don't check
	ix86_indirect_branch_register with GOT_memory_operand.
	(Bw): Likewise.
	* config/i386/predicates.md (GOT_memory_operand): Don't check
	ix86_indirect_branch_register here.
	(GOT32_symbol_operand): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/predicates.md (constant_call_address_operand):
	Rewrite ix86_indirect_branch_register logic.
	(sibcall_insn_operand): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Replace
	ix86_indirect_branch_thunk_register with
	ix86_indirect_branch_register.
	(Bw): Likewise.
	* config/i386/i386.md (indirect_jump): Likewise.
	(tablejump): Likewise.
	(*sibcall_memory): Likewise.
	(*sibcall_value_memory): Likewise.
	Peepholes of indirect call and jump via memory: Likewise.
	* config/i386/i386.opt: Likewise.
	* config/i386/predicates.md (indirect_branch_operand): Likewise.
	(GOT_memory_operand): Likewise.
	(call_insn_operand): Likewise.
	(sibcall_insn_operand): Likewise.
	(GOT32_symbol_operand): Likewise.

2018-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83837
	* omp-expand.c (expand_omp_atomic_pipeline): Use loaded_val
	type rather than type addr's type points to.
	(expand_omp_atomic_mutex): Likewise.
	(expand_omp_atomic): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83839
	* config/i386/i386.c (output_indirect_thunk_function): Use
	ASM_OUTPUT_LABEL, instead of ASM_OUTPUT_DEF, for TARGET_MACHO
	for  __x86_return_thunk.

2018-01-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/83850
	* expmed.c (extract_bit_field_1): Fix typo.

2018-01-15  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/83687
	* config/arm/iterators.md (VF): New mode iterator.
	* config/arm/neon.md (neon_vabd<mode>_2): Use the above.
	Remove integer-related logic from pattern.
	(neon_vabd<mode>_3): Likewise.

2018-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/82694
	* common.opt (fstrict-overflow): No longer an alias.
	(fwrapv-pointer): New option.
	* tree.h (TYPE_OVERFLOW_WRAPS, TYPE_OVERFLOW_UNDEFINED): Define
	also for pointer types based on flag_wrapv_pointer.
	* opts.c (common_handle_option) <case OPT_fstrict_overflow>: Set
	opts->x_flag_wrap[pv] to !value, clear opts->x_flag_trapv if
	opts->x_flag_wrapv got set.
	* fold-const.c (fold_comparison, fold_binary_loc): Revert 2017-08-01
	changes, just use TYPE_OVERFLOW_UNDEFINED on pointer type instead of
	POINTER_TYPE_OVERFLOW_UNDEFINED.
	* match.pd: Likewise in address comparison pattern.
	* doc/invoke.texi: Document -fwrapv and -fstrict-overflow.

2018-01-15  Richard Biener  <rguenther@suse.de>

	PR lto/83804
	* tree.c (free_lang_data_in_type): Always unlink TYPE_DECLs
	from TYPE_FIELDS.  Free TYPE_BINFO if not used by devirtualization.
	Reset type names to their identifier if their TYPE_DECL doesn't
	have linkage (and thus is used for ODR and devirt).
	(save_debug_info_for_decl): Remove.
	(save_debug_info_for_type): Likewise.
	(add_tree_to_fld_list): Adjust.
	* tree-pretty-print.c (dump_generic_node): Make dumping of
	type names more robust.

2018-01-15  Richard Biener  <rguenther@suse.de>

	* BASE-VER: Bump to 8.0.1.

2018-01-14  Martin Sebor  <msebor@redhat.com>

	PR other/83508
	* builtins.c (check_access): Avoid warning when the no-warning bit
	is set.

2018-01-14  Cory Fields  <cory-nospam-@coryfields.com>

	* tree-ssa-loop-im.c (sort_bbs_in_loop_postorder_cmp): Stabilize sort.
	* ira-color (allocno_hard_regs_compare): Likewise.

2018-01-14  Nathan Rossi  <nathan@nathanrossi.com>

	PR target/83013
	* config/microblaze/microblaze.c (microblaze_asm_output_ident):
	Use .pushsection/.popsection.

2018-01-14  Martin Sebor  <msebor@redhat.com>

	PR c++/81327
	* doc/invoke.texi (-Wlass-memaccess): Document suppression by casting.

2018-01-14  Jakub Jelinek  <jakub@redhat.com>

	* config.gcc (i[34567]86-*-*): Remove one duplicate gfniintrin.h
	entry from extra_headers.
	(x86_64-*-*): Remove two duplicate gfniintrin.h entries from
	extra_headers, make the list bitwise identical to the i?86-*-* one.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (ix86_set_indirect_branch_type): Disallow
	-mcmodel=large with -mindirect-branch=thunk,
	-mindirect-branch=thunk-extern, -mfunction-return=thunk and
	-mfunction-return=thunk-extern.
	* doc/invoke.texi: Document -mcmodel=large is incompatible with
	-mindirect-branch=thunk, -mindirect-branch=thunk-extern,
	-mfunction-return=thunk and -mfunction-return=thunk-extern.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (print_reg): Print the name of the full
	integer register without '%'.
	(ix86_print_operand): Handle 'V'.
	 * doc/extend.texi: Document 'V' modifier.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Disallow memory operand for
	-mindirect-branch-register.
	(Bw): Likewise.
	* config/i386/predicates.md (indirect_branch_operand): Likewise.
	(GOT_memory_operand): Likewise.
	(call_insn_operand): Likewise.
	(sibcall_insn_operand): Likewise.
	(GOT32_symbol_operand): Likewise.
	* config/i386/i386.md (indirect_jump): Call convert_memory_address
	for -mindirect-branch-register.
	(tablejump): Likewise.
	(*sibcall_memory): Likewise.
	(*sibcall_value_memory): Likewise.
	Disallow peepholes of indirect call and jump via memory for
	-mindirect-branch-register.
	(*call_pop): Replace m with Bw.
	(*call_value_pop): Likewise.
	(*sibcall_pop_memory): Replace m with Bs.
	* config/i386/i386.opt (mindirect-branch-register): New option.
	* doc/invoke.texi: Document -mindirect-branch-register option.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386-protos.h (ix86_output_function_return): New.
	* config/i386/i386.c (ix86_set_indirect_branch_type): Also
	set function_return_type.
	(indirect_thunk_name): Add ret_p to indicate thunk for function
	return.
	(output_indirect_thunk_function): Pass false to
	indirect_thunk_name.
	(ix86_output_indirect_branch_via_reg): Likewise.
	(ix86_output_indirect_branch_via_push): Likewise.
	(output_indirect_thunk_function): Create alias for function
	return thunk if regno < 0.
	(ix86_output_function_return): New function.
	(ix86_handle_fndecl_attribute): Handle function_return.
	(ix86_attribute_table): Add function_return.
	* config/i386/i386.h (machine_function): Add
	function_return_type.
	* config/i386/i386.md (simple_return_internal): Use
	ix86_output_function_return.
	(simple_return_internal_long): Likewise.
	* config/i386/i386.opt (mfunction-return=): New option.
	(indirect_branch): Mention -mfunction-return=.
	* doc/extend.texi: Document function_return function attribute.
	* doc/invoke.texi: Document -mfunction-return= option.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386-opts.h (indirect_branch): New.
	* config/i386/i386-protos.h (ix86_output_indirect_jmp): Likewise.
	* config/i386/i386.c (ix86_using_red_zone): Disallow red-zone
	with local indirect jump when converting indirect call and jump.
	(ix86_set_indirect_branch_type): New.
	(ix86_set_current_function): Call ix86_set_indirect_branch_type.
	(indirectlabelno): New.
	(indirect_thunk_needed): Likewise.
	(indirect_thunk_bnd_needed): Likewise.
	(indirect_thunks_used): Likewise.
	(indirect_thunks_bnd_used): Likewise.
	(INDIRECT_LABEL): Likewise.
	(indirect_thunk_name): Likewise.
	(output_indirect_thunk): Likewise.
	(output_indirect_thunk_function): Likewise.
	(ix86_output_indirect_branch_via_reg): Likewise.
	(ix86_output_indirect_branch_via_push): Likewise.
	(ix86_output_indirect_branch): Likewise.
	(ix86_output_indirect_jmp): Likewise.
	(ix86_code_end): Call output_indirect_thunk_function if needed.
	(ix86_output_call_insn): Call ix86_output_indirect_branch if
	needed.
	(ix86_handle_fndecl_attribute): Handle indirect_branch.
	(ix86_attribute_table): Add indirect_branch.
	* config/i386/i386.h (machine_function): Add indirect_branch_type
	and has_local_indirect_jump.
	* config/i386/i386.md (indirect_jump): Set has_local_indirect_jump
	to true.
	(tablejump): Likewise.
	(*indirect_jump): Use ix86_output_indirect_jmp.
	(*tablejump_1): Likewise.
	(simple_return_indirect_internal): Likewise.
	* config/i386/i386.opt (mindirect-branch=): New option.
	(indirect_branch): New.
	(keep): Likewise.
	(thunk): Likewise.
	(thunk-inline): Likewise.
	(thunk-extern): Likewise.
	* doc/extend.texi: Document indirect_branch function attribute.
	* doc/invoke.texi: Document -mindirect-branch= option.

2018-01-14  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83051
	* ipa-inline.c (edge_badness): Tolerate roundoff errors.

2018-01-14  Richard Sandiford  <richard.sandiford@linaro.org>

	* ipa-inline.c (want_inline_small_function_p): Return false if
	inlining has already failed with CIF_FINAL_ERROR.
	(update_caller_keys): Call want_inline_small_function_p before
	can_inline_edge_p.
	(update_callee_keys): Likewise.

2018-01-10  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-p8swap.c (rs6000_sum_of_two_registers_p):
	New function.
	(rs6000_quadword_masked_address_p): Likewise.
	(quad_aligned_load_p): Likewise.
	(quad_aligned_store_p): Likewise.
	(const_load_sequence_p): Add comment to describe the outer-most loop.
	(mimic_memory_attributes_and_flags): New function.
	(rs6000_gen_stvx): Likewise.
	(replace_swapped_aligned_store): Likewise.
	(rs6000_gen_lvx): Likewise.
	(replace_swapped_aligned_load): Likewise.
	(replace_swapped_load_constant): Capitalize argument name in
	comment describing this function.
	(rs6000_analyze_swaps): Add a third pass to search for vector loads
	and stores that access quad-word aligned addresses and replace
	with stvx or lvx instructions when appropriate.
	* config/rs6000/rs6000-protos.h (rs6000_sum_of_two_registers_p):
	New function prototype.
	(rs6000_quadword_masked_address_p): Likewise.
	(rs6000_gen_lvx): Likewise.
	(rs6000_gen_stvx): Likewise.
	* config/rs6000/vsx.md (*vsx_le_perm_load_<mode>): For modes
	VSX_D (V2DF, V2DI), modify this split to select lvx instruction
	when memory address is aligned.
	(*vsx_le_perm_load_<mode>): For modes VSX_W (V4SF, V4SI), modify
	this split to select lvx instruction when memory address is aligned.
	(*vsx_le_perm_load_v8hi): Modify this split to select lvx
	instruction when memory address is aligned.
	(*vsx_le_perm_load_v16qi): Likewise.
	(four unnamed splitters): Modify to select the stvx instruction
	when memory is aligned.

2018-01-13  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (determine_unlikely_bbs): Handle correctly BBs
	which appears in the queue multiple times.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vec_lower_bound): New structure.
	(_loop_vec_info): Add check_nonzero and lower_bounds.
	(LOOP_VINFO_CHECK_NONZERO): New macro.
	(LOOP_VINFO_LOWER_BOUNDS): Likewise.
	(LOOP_REQUIRES_VERSIONING_FOR_ALIAS): Check lower_bounds too.
	* tree-data-ref.h (dr_with_seg_len): Add access_size and align
	fields.  Make seg_len the distance travelled, not including the
	access size.
	(dr_direction_indicator): Declare.
	(dr_zero_step_indicator): Likewise.
	(dr_known_forward_stride_p): Likewise.
	* tree-data-ref.c: Include stringpool.h, tree-vrp.h and
	tree-ssanames.h.
	(runtime_alias_check_p): Allow runtime alias checks with
	variable strides.
	(operator ==): Compare access_size and align.
	(prune_runtime_alias_test_list): Rework for new distinction between
	the access_size and seg_len.
	(create_intersect_range_checks_index): Likewise.  Cope with polynomial
	segment lengths.
	(get_segment_min_max): New function.
	(create_intersect_range_checks): Use it.
	(dr_step_indicator): New function.
	(dr_direction_indicator): Likewise.
	(dr_zero_step_indicator): Likewise.
	(dr_known_forward_stride_p): Likewise.
	* tree-loop-distribution.c (data_ref_segment_size): Return
	DR_STEP * (niters - 1).
	(compute_alias_check_pairs): Update call to the dr_with_seg_len
	constructor.
	* tree-vect-data-refs.c (vect_check_nonzero_value): New function.
	(vect_preserves_scalar_order_p): New function, split out from...
	(vect_analyze_data_ref_dependence): ...here.  Check for zero steps.
	(vect_vfa_segment_size): Return DR_STEP * (length_factor - 1).
	(vect_vfa_access_size): New function.
	(vect_vfa_align): Likewise.
	(vect_compile_time_alias): Take access_size_a and access_b arguments.
	(dump_lower_bound): New function.
	(vect_check_lower_bound): Likewise.
	(vect_small_gap_p): Likewise.
	(vectorizable_with_step_bound_p): Likewise.
	(vect_prune_runtime_alias_test_list): Ignore cross-iteration
	depencies if the vectorization factor is 1.  Convert the checks
	for nonzero steps into checks on the bounds of DR_STEP.  Try using
	a bunds check for variable steps if the minimum required step is
	relatively small. Update calls to the dr_with_seg_len
	constructor and to vect_compile_time_alias.
	* tree-vect-loop-manip.c (vect_create_cond_for_lower_bounds): New
	function.
	(vect_loop_versioning): Call it.
	* tree-vect-loop.c (vect_analyze_loop_2): Clear LOOP_VINFO_LOWER_BOUNDS
	when retrying.
	(vect_estimate_min_profitable_iters): Account for any bounds checks.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/sourcebuild.texi (vect_scatter_store): Document.
	* optabs.def (scatter_store_optab, mask_scatter_store_optab): New
	optabs.
	* doc/md.texi (scatter_store@var{m}, mask_scatter_store@var{m}):
	Document.
	* genopinit.c (main): Add supports_vec_scatter_store and
	supports_vec_scatter_store_cached to target_optabs.
	* gimple.h (gimple_expr_type): Handle IFN_SCATTER_STORE and
	IFN_MASK_SCATTER_STORE.
	* internal-fn.def (SCATTER_STORE, MASK_SCATTER_STORE): New internal
	functions.
	* internal-fn.h (internal_store_fn_p): Declare.
	(internal_fn_stored_value_index): Likewise.
	* internal-fn.c (scatter_store_direct): New macro.
	(expand_scatter_store_optab_fn): New function.
	(direct_scatter_store_optab_supported_p): New macro.
	(internal_store_fn_p): New function.
	(internal_gather_scatter_fn_p): Handle IFN_SCATTER_STORE and
	IFN_MASK_SCATTER_STORE.
	(internal_fn_mask_index): Likewise.
	(internal_fn_stored_value_index): New function.
	(internal_gather_scatter_fn_supported_p): Adjust operand numbers
	for scatter stores.
	* optabs-query.h (supports_vec_scatter_store_p): Declare.
	* optabs-query.c (supports_vec_scatter_store_p): New function.
	* tree-vectorizer.h (vect_get_store_rhs): Declare.
	* tree-vect-data-refs.c (vect_analyze_data_ref_access): Return
	true for scatter stores.
	(vect_gather_scatter_fn_p): Handle scatter stores too.
	(vect_check_gather_scatter): Consider using scatter stores if
	supports_vec_scatter_store_p.
	* tree-vect-patterns.c (vect_try_gather_scatter_pattern): Handle
	scatter stores too.
	* tree-vect-stmts.c (exist_non_indexing_operands_for_use_p): Use
	internal_fn_stored_value_index.
	(check_load_store_masking): Handle scatter stores too.
	(vect_get_store_rhs): Make public.
	(vectorizable_call): Use internal_store_fn_p.
	(vectorizable_store): Handle scatter store internal functions.
	(vect_transform_stmt): Compare GROUP_STORE_COUNT with GROUP_SIZE
	when deciding whether the end of the group has been reached.
	* config/aarch64/aarch64.md (UNSPEC_ST1_SCATTER): New unspec.
	* config/aarch64/aarch64-sve.md (scatter_store<mode>): New expander.
	(mask_scatter_store<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_gather_scatter_fn_p): Declare.
	* tree-vect-data-refs.c (vect_gather_scatter_fn_p): Make public.
	* tree-vect-stmts.c (vect_truncate_gather_scatter_offset): New
	function.
	(vect_use_strided_gather_scatters_p): Take a masked_p argument.
	Use vect_truncate_gather_scatter_offset if we can't treat the
	operation as a normal gather load or scatter store.
	(get_group_load_store_type): Take the gather_scatter_info
	as argument.  Try using a gather load or scatter store for
	single-element groups.
	(get_load_store_type): Update calls to get_group_load_store_type
	and vect_use_strided_gather_scatters_p.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_create_data_ref_ptr): Take an extra
	optional tree argument.
	* tree-vect-data-refs.c (vect_check_gather_scatter): Check for
	null target hooks.
	(vect_create_data_ref_ptr): Take the iv_step as an optional argument,
	but continue to use the current value as a fallback.
	(bump_vector_ptr): Use operand_equal_p rather than tree_int_cst_compare
	to compare the updates.
	* tree-vect-stmts.c (vect_use_strided_gather_scatters_p): New function.
	(get_load_store_type): Use it when handling a strided access.
	(vect_get_strided_load_store_ops): New function.
	(vect_get_data_ptr_increment): Likewise.
	(vectorizable_load): Handle strided gather loads.  Always pass
	a step to vect_create_data_ref_ptr and bump_vector_ptr.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (gather_load@var{m}): Document.
	(mask_gather_load@var{m}): Likewise.
	* genopinit.c (main): Add supports_vec_gather_load and
	supports_vec_gather_load_cached to target_optabs.
	* optabs-tree.c (init_tree_optimization_optabs): Use
	ggc_cleared_alloc to allocate target_optabs.
	* optabs.def (gather_load_optab, mask_gather_laod_optab): New optabs.
	* internal-fn.def (GATHER_LOAD, MASK_GATHER_LOAD): New internal
	functions.
	* internal-fn.h (internal_load_fn_p): Declare.
	(internal_gather_scatter_fn_p): Likewise.
	(internal_fn_mask_index): Likewise.
	(internal_gather_scatter_fn_supported_p): Likewise.
	* internal-fn.c (gather_load_direct): New macro.
	(expand_gather_load_optab_fn): New function.
	(direct_gather_load_optab_supported_p): New macro.
	(direct_internal_fn_optab): New function.
	(internal_load_fn_p): Likewise.
	(internal_gather_scatter_fn_p): Likewise.
	(internal_fn_mask_index): Likewise.
	(internal_gather_scatter_fn_supported_p): Likewise.
	* optabs-query.c (supports_at_least_one_mode_p): New function.
	(supports_vec_gather_load_p): Likewise.
	* optabs-query.h (supports_vec_gather_load_p): Declare.
	* tree-vectorizer.h (gather_scatter_info): Add ifn, element_type
	and memory_type field.
	(NUM_PATTERNS): Bump to 15.
	* tree-vect-data-refs.c: Include internal-fn.h.
	(vect_gather_scatter_fn_p): New function.
	(vect_describe_gather_scatter_call): Likewise.
	(vect_check_gather_scatter): Try using internal functions for
	gather loads.  Recognize existing calls to a gather load function.
	(vect_analyze_data_refs): Consider using gather loads if
	supports_vec_gather_load_p.
	* tree-vect-patterns.c (vect_get_load_store_mask): New function.
	(vect_get_gather_scatter_offset_type): Likewise.
	(vect_convert_mask_for_vectype): Likewise.
	(vect_add_conversion_to_patterm): Likewise.
	(vect_try_gather_scatter_pattern): Likewise.
	(vect_recog_gather_scatter_pattern): New pattern recognizer.
	(vect_vect_recog_func_ptrs): Add it.
	* tree-vect-stmts.c (exist_non_indexing_operands_for_use_p): Use
	internal_fn_mask_index and internal_gather_scatter_fn_p.
	(check_load_store_masking): Take the gather_scatter_info as an
	argument and handle gather loads.
	(vect_get_gather_scatter_ops): New function.
	(vectorizable_call): Check internal_load_fn_p.
	(vectorizable_load): Likewise.  Handle gather load internal
	functions.
	(vectorizable_store): Update call to check_load_store_masking.
	* config/aarch64/aarch64.md (UNSPEC_LD1_GATHER): New unspec.
	* config/aarch64/iterators.md (SVE_S, SVE_D): New mode iterators.
	* config/aarch64/predicates.md (aarch64_gather_scale_operand_w)
	(aarch64_gather_scale_operand_d): New predicates.
	* config/aarch64/aarch64-sve.md (gather_load<mode>): New expander.
	(mask_gather_load<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (fold_left_plus_optab): New optab.
	* doc/md.texi (fold_left_plus_@var{m}): Document.
	* internal-fn.def (IFN_FOLD_LEFT_PLUS): New internal function.
	* internal-fn.c (fold_left_direct): Define.
	(expand_fold_left_optab_fn): Likewise.
	(direct_fold_left_optab_supported_p): Likewise.
	* fold-const-call.c (fold_const_fold_left): New function.
	(fold_const_call): Use it to fold CFN_FOLD_LEFT_PLUS.
	* tree-parloops.c (valid_reduction_p): New function.
	(gather_scalar_reductions): Use it.
	* tree-vectorizer.h (FOLD_LEFT_REDUCTION): New vect_reduction_type.
	(vect_finish_replace_stmt): Declare.
	* tree-vect-loop.c (fold_left_reduction_fn): New function.
	(needs_fold_left_reduction_p): New function, split out from...
	(vect_is_simple_reduction): ...here.  Accept reductions that
	forbid reassociation, but give them type FOLD_LEFT_REDUCTION.
	(vect_force_simple_reduction): Also store the reduction type in
	the assignment's STMT_VINFO_REDUC_TYPE.
	(vect_model_reduction_cost): Handle FOLD_LEFT_REDUCTION.
	(merge_with_identity): New function.
	(vect_expand_fold_left): Likewise.
	(vectorize_fold_left_reduction): Likewise.
	(vectorizable_reduction): Handle FOLD_LEFT_REDUCTION.  Leave the
	scalar phi in place for it.  Check for target support and reject
	cases that would reassociate the operation.  Defer the transform
	phase to vectorize_fold_left_reduction.
	* config/aarch64/aarch64.md (UNSPEC_FADDA): New unspec.
	* config/aarch64/aarch64-sve.md (fold_left_plus_<mode>): New expander.
	(*fold_left_plus_<mode>, *pred_fold_left_plus_<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-if-conv.c (predicate_mem_writes): Remove redundant
	call to ifc_temp_var.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (legitimize_address_displacement): Take the original
	offset as a poly_int.
	* targhooks.h (default_legitimize_address_displacement): Update
	accordingly.
	* targhooks.c (default_legitimize_address_displacement): Likewise.
	* doc/tm.texi: Regenerate.
	* lra-constraints.c (base_plus_disp_to_reg): Take the displacement
	as an argument, moving assert of ad->disp == ad->disp_term to...
	(process_address_1): ...here.  Update calls to base_plus_disp_to_reg.
	Try calling targetm.legitimize_address_displacement before expanding
	the address rather than afterwards, and adjust for the new interface.
	* config/aarch64/aarch64.c (aarch64_legitimize_address_displacement):
	Match the new hook interface.  Handle SVE addresses.
	* config/sh/sh.c (sh_legitimize_address_displacement): Make the
	new hook interface.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* Makefile.in (OBJS): Add early-remat.o.
	* target.def (select_early_remat_modes): New hook.
	* doc/tm.texi.in (TARGET_SELECT_EARLY_REMAT_MODES): New hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_select_early_remat_modes): Declare.
	* targhooks.c (default_select_early_remat_modes): New function.
	* timevar.def (TV_EARLY_REMAT): New timevar.
	* passes.def (pass_early_remat): New pass.
	* tree-pass.h (make_pass_early_remat): Declare.
	* early-remat.c: New file.
	* config/aarch64/aarch64.c (aarch64_select_early_remat_modes): New
	function.
	(TARGET_SELECT_EARLY_REMAT_MODES): Define.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop-manip.c (vect_gen_scalar_loop_niters): Replace
	vfm1 with a bound_epilog parameter.
	(vect_do_peeling): Update calls accordingly, and move the prologue
	call earlier in the function.  Treat the base bound_epilog as 0 for
	fully-masked loops and retain vf - 1 for other loops.  Add 1 to
	this base when peeling for gaps.
	* tree-vect-loop.c (vect_analyze_loop_2): Allow peeling for gaps
	with fully-masked loops.
	(vect_estimate_min_profitable_iters): Handle the single peeled
	iteration in that case.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_analyze_group_access_1): Allow
	single-element interleaving even if the size is not a power of 2.
	* tree-vect-stmts.c (get_load_store_type): Disallow elementwise
	accesses for single-element interleaving if the group size is
	not a power of 2.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (fold_extract_last_@var{m}): Document.
	* doc/sourcebuild.texi (vect_fold_extract_last): Likewise.
	* optabs.def (fold_extract_last_optab): New optab.
	* internal-fn.def (FOLD_EXTRACT_LAST): New internal function.
	* internal-fn.c (fold_extract_direct): New macro.
	(expand_fold_extract_optab_fn): Likewise.
	(direct_fold_extract_optab_supported_p): Likewise.
	* tree-vectorizer.h (EXTRACT_LAST_REDUCTION): New vect_reduction_type.
	* tree-vect-loop.c (vect_model_reduction_cost): Handle
	EXTRACT_LAST_REDUCTION.
	(get_initial_def_for_reduction): Do not create an initial vector
	for EXTRACT_LAST_REDUCTION reductions.
	(vectorizable_reduction): Leave the scalar phi in place for
	EXTRACT_LAST_REDUCTIONs.  Try using EXTRACT_LAST_REDUCTION
	ahead of INTEGER_INDUC_COND_REDUCTION.  Do not check for an
	epilogue code for EXTRACT_LAST_REDUCTION and defer the
	transform phase to vectorizable_condition.
	* tree-vect-stmts.c (vect_finish_stmt_generation_1): New function,
	split out from...
	(vect_finish_stmt_generation): ...here.
	(vect_finish_replace_stmt): New function.
	(vectorizable_condition): Handle EXTRACT_LAST_REDUCTION.
	* config/aarch64/aarch64-sve.md (fold_extract_last_<mode>): New
	pattern.
	* config/aarch64/aarch64.md (UNSPEC_CLASTB): New unspec.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (extract_last_@var{m}): Document.
	* optabs.def (extract_last_optab): New optab.
	* internal-fn.def (EXTRACT_LAST): New internal function.
	* internal-fn.c (cond_unary_direct): New macro.
	(expand_cond_unary_optab_fn): Likewise.
	(direct_cond_unary_optab_supported_p): Likewise.
	* tree-vect-loop.c (vectorizable_live_operation): Allow fully-masked
	loops using EXTRACT_LAST.
	* config/aarch64/aarch64-sve.md (aarch64_sve_lastb<mode>): Rename to...
	(extract_last_<mode>): ...this optab.
	(vec_extract<mode><Vel>): Update accordingly.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (empty_mask_is_expensive): New hook.
	* doc/tm.texi.in (TARGET_VECTORIZE_EMPTY_MASK_IS_EXPENSIVE): New hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_empty_mask_is_expensive): Declare.
	* targhooks.c (default_empty_mask_is_expensive): New function.
	* tree-vectorizer.c (vectorize_loops): Only call optimize_mask_stores
	if the target says that empty masks are expensive.
	* config/aarch64/aarch64.c (aarch64_empty_mask_is_expensive):
	New function.
	(TARGET_VECTORIZE_EMPTY_MASK_IS_EXPENSIVE): Redefine.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (_loop_vec_info::mask_skip_niters): New field.
	(LOOP_VINFO_MASK_SKIP_NITERS): New macro.
	(vect_use_loop_mask_for_alignment_p): New function.
	(vect_prepare_for_masked_peels, vect_gen_while_not): Declare.
	* tree-vect-loop-manip.c (vect_set_loop_masks_directly): Add an
	niters_skip argument.  Make sure that the first niters_skip elements
	of the first iteration are inactive.
	(vect_set_loop_condition_masked): Handle LOOP_VINFO_MASK_SKIP_NITERS.
	Update call to vect_set_loop_masks_directly.
	(get_misalign_in_elems): New function, split out from...
	(vect_gen_prolog_loop_niters): ...here.
	(vect_update_init_of_dr): Take a code argument that specifies whether
	the adjustment should be added or subtracted.
	(vect_update_init_of_drs): Likewise.
	(vect_prepare_for_masked_peels): New function.
	(vect_do_peeling): Skip prologue peeling if we're using a mask
	instead.  Update call to vect_update_inits_of_drs.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	mask_skip_niters.
	(vect_analyze_loop_2): Allow fully-masked loops with peeling for
	alignment.  Do not include the number of peeled iterations in
	the minimum threshold in that case.
	(vectorizable_induction): Adjust the start value down by
	LOOP_VINFO_MASK_SKIP_NITERS iterations.
	(vect_transform_loop): Call vect_prepare_for_masked_peels.
	Take the number of skipped iterations into account when calculating
	the loop bounds.
	* tree-vect-stmts.c (vect_gen_while_not): New function.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/sourcebuild.texi (vect_fully_masked): Document.
	* params.def (PARAM_MIN_VECT_LOOP_BOUND): Change minimum and
	default value to 0.
	* tree-vect-loop.c (vect_analyze_loop_costing): New function,
	split out from...
	(vect_analyze_loop_2): ...here. Don't check the vectorization
	factor against the number of loop iterations if the loop is
	fully-masked.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-ssa-loop-ivopts.c (USE_ADDRESS): Split into...
	(USE_REF_ADDRESS, USE_PTR_ADDRESS): ...these new use types.
	(dump_groups): Update accordingly.
	(iv_use::mem_type): New member variable.
	(address_p): New function.
	(record_use): Add a mem_type argument and initialize the new
	mem_type field.
	(record_group_use): Add a mem_type argument.  Use address_p.
	Remove obsolete null checks of base_object.  Update call to record_use.
	(find_interesting_uses_op): Update call to record_group_use.
	(find_interesting_uses_cond): Likewise.
	(find_interesting_uses_address): Likewise.
	(get_mem_type_for_internal_fn): New function.
	(find_address_like_use): Likewise.
	(find_interesting_uses_stmt): Try find_address_like_use before
	calling find_interesting_uses_op.
	(addr_offset_valid_p): Use the iv mem_type field as the type
	of the addressed memory.
	(add_autoinc_candidates): Likewise.
	(get_address_cost): Likewise.
	(split_small_address_groups_p): Use address_p.
	(split_address_groups): Likewise.
	(add_iv_candidate_for_use): Likewise.
	(autoinc_possible_for_pair): Likewise.
	(rewrite_groups): Likewise.
	(get_use_type): Check for USE_REF_ADDRESS instead of USE_ADDRESS.
	(determine_group_iv_cost): Update after split of USE_ADDRESS.
	(get_alias_ptr_type_for_ptr_address): New function.
	(rewrite_use_address): Rewrite address uses in calls that were
	identified by find_address_like_use.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_addr_expr_1): Handle ADDR_EXPRs of
	TARGET_MEM_REFs.
	* gimple-expr.h (is_gimple_addressable: Likewise.
	* gimple-expr.c (is_gimple_address): Likewise.
	* internal-fn.c (expand_call_mem_ref): New function.
	(expand_mask_load_optab_fn): Use it.
	(expand_mask_store_optab_fn): Likewise.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (cond_add@var{mode}, cond_sub@var{mode})
	(cond_and@var{mode}, cond_ior@var{mode}, cond_xor@var{mode})
	(cond_smin@var{mode}, cond_smax@var{mode}, cond_umin@var{mode})
	(cond_umax@var{mode}): Document.
	* optabs.def (cond_add_optab, cond_sub_optab, cond_and_optab)
	(cond_ior_optab, cond_xor_optab, cond_smin_optab, cond_smax_optab)
	(cond_umin_optab, cond_umax_optab): New optabs.
	* internal-fn.def (COND_ADD, COND_SUB, COND_MIN, COND_MAX, COND_AND)
	(COND_IOR, COND_XOR): New internal functions.
	* internal-fn.h (get_conditional_internal_fn): Declare.
	* internal-fn.c (cond_binary_direct): New macro.
	(expand_cond_binary_optab_fn): Likewise.
	(direct_cond_binary_optab_supported_p): Likewise.
	(get_conditional_internal_fn): New function.
	* tree-vect-loop.c (vectorizable_reduction): Handle fully-masked loops.
	Cope with reduction statements that are vectorized as calls rather
	than assignments.
	* config/aarch64/aarch64-sve.md (cond_<optab><mode>): New insns.
	* config/aarch64/iterators.md (UNSPEC_COND_ADD, UNSPEC_COND_SUB)
	(UNSPEC_COND_SMAX, UNSPEC_COND_UMAX, UNSPEC_COND_SMIN)
	(UNSPEC_COND_UMIN, UNSPEC_COND_AND, UNSPEC_COND_ORR)
	(UNSPEC_COND_EOR): New unspecs.
	(optab): Add mappings for them.
	(SVE_COND_INT_OP, SVE_COND_FP_OP): New int iterators.
	(sve_int_op, sve_fp_op): New int attributes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (while_ult_optab): New optab.
	* doc/md.texi (while_ult@var{m}@var{n}): Document.
	* internal-fn.def (WHILE_ULT): New internal function.
	* internal-fn.h (direct_internal_fn_supported_p): New override
	that takes two types as argument.
	* internal-fn.c (while_direct): New macro.
	(expand_while_optab_fn): New function.
	(convert_optab_supported_p): Likewise.
	(direct_while_optab_supported_p): New macro.
	* wide-int.h (wi::udiv_ceil): New function.
	* tree-vectorizer.h (rgroup_masks): New structure.
	(vec_loop_masks): New typedef.
	(_loop_vec_info): Add masks, mask_compare_type, can_fully_mask_p
	and fully_masked_p.
	(LOOP_VINFO_CAN_FULLY_MASK_P, LOOP_VINFO_FULLY_MASKED_P)
	(LOOP_VINFO_MASKS, LOOP_VINFO_MASK_COMPARE_TYPE): New macros.
	(vect_max_vf): New function.
	(slpeel_make_loop_iterate_ntimes): Delete.
	(vect_set_loop_condition, vect_get_loop_mask_type, vect_gen_while)
	(vect_halve_mask_nunits, vect_double_mask_nunits): Declare.
	(vect_record_loop_mask, vect_get_loop_mask): Likewise.
	* tree-vect-loop-manip.c: Include tree-ssa-loop-niter.h,
	internal-fn.h, stor-layout.h and optabs-query.h.
	(vect_set_loop_mask): New function.
	(add_preheader_seq): Likewise.
	(add_header_seq): Likewise.
	(interleave_supported_p): Likewise.
	(vect_maybe_permute_loop_masks): Likewise.
	(vect_set_loop_masks_directly): Likewise.
	(vect_set_loop_condition_masked): Likewise.
	(vect_set_loop_condition_unmasked): New function, split out from
	slpeel_make_loop_iterate_ntimes.
	(slpeel_make_loop_iterate_ntimes): Rename to..
	(vect_set_loop_condition): ...this.  Use vect_set_loop_condition_masked
	for fully-masked loops and vect_set_loop_condition_unmasked otherwise.
	(vect_do_peeling): Update call accordingly.
	(vect_gen_vector_loop_niters): Use VF as the step for fully-masked
	loops.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	mask_compare_type, can_fully_mask_p and fully_masked_p.
	(release_vec_loop_masks): New function.
	(_loop_vec_info): Use it to free the loop masks.
	(can_produce_all_loop_masks_p): New function.
	(vect_get_max_nscalars_per_iter): Likewise.
	(vect_verify_full_masking): Likewise.
	(vect_analyze_loop_2): Save LOOP_VINFO_CAN_FULLY_MASK_P around
	retries, and free the mask rgroups before retrying.  Check loop-wide
	reasons for disallowing fully-masked loops.  Make the final decision
	about whether use a fully-masked loop or not.
	(vect_estimate_min_profitable_iters): Do not assume that peeling
	for the number of iterations will be needed for fully-masked loops.
	(vectorizable_reduction): Disable fully-masked loops.
	(vectorizable_live_operation): Likewise.
	(vect_halve_mask_nunits): New function.
	(vect_double_mask_nunits): Likewise.
	(vect_record_loop_mask): Likewise.
	(vect_get_loop_mask): Likewise.
	(vect_transform_loop): Handle the case in which the final loop
	iteration might handle a partial vector.  Call vect_set_loop_condition
	instead of slpeel_make_loop_iterate_ntimes.
	* tree-vect-stmts.c: Include tree-ssa-loop-niter.h and gimple-fold.h.
	(check_load_store_masking): New function.
	(prepare_load_store_mask): Likewise.
	(vectorizable_store): Handle fully-masked loops.
	(vectorizable_load): Likewise.
	(supportable_widening_operation): Use vect_halve_mask_nunits for
	booleans.
	(supportable_narrowing_operation): Likewise vect_double_mask_nunits.
	(vect_gen_while): New function.
	* config/aarch64/aarch64.md (umax<mode>3): New expander.
	(aarch64_uqdec<mode>): New insn.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (reduc_and_scal_optab, reduc_ior_scal_optab)
	(reduc_xor_scal_optab): New optabs.
	* doc/md.texi (reduc_and_scal_@var{m}, reduc_ior_scal_@var{m})
	(reduc_xor_scal_@var{m}): Document.
	* doc/sourcebuild.texi (vect_logical_reduc): Likewise.
	* internal-fn.def (IFN_REDUC_AND, IFN_REDUC_IOR, IFN_REDUC_XOR): New
	internal functions.
	* fold-const-call.c (fold_const_call): Handle them.
	* tree-vect-loop.c (reduction_fn_for_scalar_code): Return the new
	internal functions for BIT_AND_EXPR, BIT_IOR_EXPR and BIT_XOR_EXPR.
	* config/aarch64/aarch64-sve.md (reduc_<bit_reduc>_scal_<mode>):
	(*reduc_<bit_reduc>_scal_<mode>): New patterns.
	* config/aarch64/iterators.md (UNSPEC_ANDV, UNSPEC_ORV)
	(UNSPEC_XORV): New unspecs.
	(optab): Add entries for them.
	(BITWISEV): New int iterator.
	(bit_reduc_op): New int attributes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (vec_shl_insert_@var{m}): New optab.
	* internal-fn.def (VEC_SHL_INSERT): New internal function.
	* optabs.def (vec_shl_insert_optab): New optab.
	* tree-vectorizer.h (can_duplicate_and_interleave_p): Declare.
	(duplicate_and_interleave): Likewise.
	* tree-vect-loop.c: Include internal-fn.h.
	(neutral_op_for_slp_reduction): New function, split out from
	get_initial_defs_for_reduction.
	(get_initial_def_for_reduction): Handle option 2 for variable-length
	vectors by loading the neutral value into a vector and then shifting
	the initial value into element 0.
	(get_initial_defs_for_reduction): Replace the code argument with
	the neutral value calculated by neutral_op_for_slp_reduction.
	Use gimple_build_vector for constant-length vectors.
	Use IFN_VEC_SHL_INSERT for variable-length vectors if all
	but the first group_size elements have a neutral value.
	Use duplicate_and_interleave otherwise.
	(vect_create_epilog_for_reduction): Take a neutral_op parameter.
	Update call to get_initial_defs_for_reduction.  Handle SLP
	reductions for variable-length vectors by creating one vector
	result for each scalar result, with the elements associated
	with other scalar results stubbed out with the neutral value.
	(vectorizable_reduction): Call neutral_op_for_slp_reduction.
	Require IFN_VEC_SHL_INSERT for double reductions on
	variable-length vectors, or SLP reductions that have
	a neutral value.  Require can_duplicate_and_interleave_p
	support for variable-length unchained SLP reductions if there
	is no neutral value, such as for MIN/MAX reductions.  Also require
	the number of vector elements to be a multiple of the number of
	SLP statements when doing variable-length unchained SLP reductions.
	Update call to vect_create_epilog_for_reduction.
	* tree-vect-slp.c (can_duplicate_and_interleave_p): Make public
	and remove initial values.
	(duplicate_and_interleave): Make public.
	* config/aarch64/aarch64.md (UNSPEC_INSR): New unspec.
	* config/aarch64/aarch64-sve.md (vec_shl_insert_<mode>): New insn.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c: Include gimple-fold.h and internal-fn.h
	(can_duplicate_and_interleave_p): New function.
	(vect_get_and_check_slp_defs): Take the vector of statements
	rather than just the current one.  Remove excess parentheses.
	Restriction rejectinon of vect_constant_def and vect_external_def
	for variable-length vectors to boolean types, or types for which
	can_duplicate_and_interleave_p is false.
	(vect_build_slp_tree_2): Update call to vect_get_and_check_slp_defs.
	(duplicate_and_interleave): New function.
	(vect_get_constant_vectors): Use gimple_build_vector for
	constant-length vectors and suitable variable-length constant
	vectors.  Use duplicate_and_interleave for other variable-length
	vectors.  Don't defer the update when inserting new statements.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Make sure
	min_profitable_iters doesn't go negative.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (vec_mask_load_lanes@var{m}@var{n}): Document.
	(vec_mask_store_lanes@var{m}@var{n}): Likewise.
	* optabs.def (vec_mask_load_lanes_optab): New optab.
	(vec_mask_store_lanes_optab): Likewise.
	* internal-fn.def (MASK_LOAD_LANES): New internal function.
	(MASK_STORE_LANES): Likewise.
	* internal-fn.c (mask_load_lanes_direct): New macro.
	(mask_store_lanes_direct): Likewise.
	(expand_mask_load_optab_fn): Handle masked operations.
	(expand_mask_load_lanes_optab_fn): New macro.
	(expand_mask_store_optab_fn): Handle masked operations.
	(expand_mask_store_lanes_optab_fn): New macro.
	(direct_mask_load_lanes_optab_supported_p): Likewise.
	(direct_mask_store_lanes_optab_supported_p): Likewise.
	* tree-vectorizer.h (vect_store_lanes_supported): Take a masked_p
	parameter.
	(vect_load_lanes_supported): Likewise.
	* tree-vect-data-refs.c (strip_conversion): New function.
	(can_group_stmts_p): Likewise.
	(vect_analyze_data_ref_accesses): Use it instead of checking
	for a pair of assignments.
	(vect_store_lanes_supported): Take a masked_p parameter.
	(vect_load_lanes_supported): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_2): Update calls to
	vect_store_lanes_supported and vect_load_lanes_supported.
	* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
	* tree-vect-stmts.c (get_group_load_store_type): Take a masked_p
	parameter.  Don't allow gaps for masked accesses.
	Use vect_get_store_rhs.  Update calls to vect_store_lanes_supported
	and vect_load_lanes_supported.
	(get_load_store_type): Take a masked_p parameter and update
	call to get_group_load_store_type.
	(vectorizable_store): Update call to get_load_store_type.
	Handle IFN_MASK_STORE_LANES.
	(vectorizable_load): Update call to get_load_store_type.
	Handle IFN_MASK_LOAD_LANES.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-modes.def: Define x2, x3 and x4 vector
	modes for SVE.
	* config/aarch64/aarch64-protos.h
	(aarch64_sve_struct_memory_operand_p): Declare.
	* config/aarch64/iterators.md (SVE_STRUCT): New mode iterator.
	(vector_count, insn_length, VSINGLE, vsingle): New mode attributes.
	(VPRED, vpred): Handle SVE structure modes.
	* config/aarch64/constraints.md (Utx): New constraint.
	* config/aarch64/predicates.md (aarch64_sve_struct_memory_operand)
	(aarch64_sve_struct_nonimmediate_operand): New predicates.
	* config/aarch64/aarch64.md (UNSPEC_LDN, UNSPEC_STN): New unspecs.
	* config/aarch64/aarch64-sve.md (mov<mode>, *aarch64_sve_mov<mode>_le)
	(*aarch64_sve_mov<mode>_be, pred_mov<mode>): New patterns for
	structure modes.  Split into pieces after RA.
	(vec_load_lanes<mode><vsingle>, vec_mask_load_lanes<mode><vsingle>)
	(vec_store_lanes<mode><vsingle>, vec_mask_store_lanes<mode><vsingle>):
	New patterns.
	* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle
	SVE structure modes.
	(aarch64_classify_address): Likewise.
	(sizetochar): Move earlier in file.
	(aarch64_print_operand): Handle SVE register lists.
	(aarch64_array_mode): New function.
	(aarch64_sve_struct_memory_operand_p): Likewise.
	(TARGET_ARRAY_MODE): Redefine.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (array_mode): New target hook.
	* doc/tm.texi.in (TARGET_ARRAY_MODE): New hook.
	* doc/tm.texi: Regenerate.
	* hooks.h (hook_optmode_mode_uhwi_none): Declare.
	* hooks.c (hook_optmode_mode_uhwi_none): New function.
	* tree-vect-data-refs.c (vect_lanes_optab_supported_p): Use
	targetm.array_mode.
	* stor-layout.c (mode_for_array): Likewise.  Support polynomial
	type sizes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* fold-const.c (fold_binary_loc): Check the argument types
	rather than the result type when testing for a vector operation.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/tm.texi.in (DWARF_LAZY_REGISTER_VALUE): Document.
	* doc/tm.texi: Regenerate.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/invoke.texi (-msve-vector-bits=): Document new option.
	(sve): Document new AArch64 extension.
	* doc/md.texi (w): Extend the description of the AArch64
	constraint to include SVE vectors.
	(Upl, Upa): Document new AArch64 predicate constraints.
	* config/aarch64/aarch64-opts.h (aarch64_sve_vector_bits_enum): New
	enum.
	* config/aarch64/aarch64.opt (sve_vector_bits): New enum.
	(msve-vector-bits=): New option.
	* config/aarch64/aarch64-option-extensions.def (fp, simd): Disable
	SVE when these are disabled.
	(sve): New extension.
	* config/aarch64/aarch64-modes.def: Define SVE vector and predicate
	modes.  Adjust their number of units based on aarch64_sve_vg.
	(MAX_BITSIZE_MODE_ANY_MODE): Define.
	* config/aarch64/aarch64-protos.h (ADDR_QUERY_ANY): New
	aarch64_addr_query_type.
	(aarch64_const_vec_all_same_in_range_p, aarch64_sve_pred_mode)
	(aarch64_sve_cnt_immediate_p, aarch64_sve_addvl_addpl_immediate_p)
	(aarch64_sve_inc_dec_immediate_p, aarch64_add_offset_temporaries)
	(aarch64_split_add_offset, aarch64_output_sve_cnt_immediate)
	(aarch64_output_sve_addvl_addpl, aarch64_output_sve_inc_dec_immediate)
	(aarch64_output_sve_mov_immediate, aarch64_output_ptrue): Declare.
	(aarch64_simd_imm_zero_p): Delete.
	(aarch64_check_zero_based_sve_index_immediate): Declare.
	(aarch64_sve_index_immediate_p, aarch64_sve_arith_immediate_p)
	(aarch64_sve_bitmask_immediate_p, aarch64_sve_dup_immediate_p)
	(aarch64_sve_cmp_immediate_p, aarch64_sve_float_arith_immediate_p)
	(aarch64_sve_float_mul_immediate_p): Likewise.
	(aarch64_classify_symbol): Take the offset as a HOST_WIDE_INT
	rather than an rtx.
	(aarch64_sve_ld1r_operand_p, aarch64_sve_ldr_operand_p): Declare.
	(aarch64_expand_mov_immediate): Take a gen_vec_duplicate callback.
	(aarch64_emit_sve_pred_move, aarch64_expand_sve_mem_move): Declare.
	(aarch64_expand_sve_vec_cmp_int, aarch64_expand_sve_vec_cmp_float)
	(aarch64_expand_sve_vcond, aarch64_expand_sve_vec_perm): Declare.
	(aarch64_regmode_natural_size): Likewise.
	* config/aarch64/aarch64.h (AARCH64_FL_SVE): New macro.
	(AARCH64_FL_V8_3, AARCH64_FL_RCPC, AARCH64_FL_DOTPROD): Shift
	left one place.
	(AARCH64_ISA_SVE, TARGET_SVE): New macros.
	(FIXED_REGISTERS, CALL_USED_REGISTERS, REGISTER_NAMES): Add entries
	for VG and the SVE predicate registers.
	(V_ALIASES): Add a "z"-prefixed alias.
	(FIRST_PSEUDO_REGISTER): Change to P15_REGNUM + 1.
	(AARCH64_DWARF_VG, AARCH64_DWARF_P0): New macros.
	(PR_REGNUM_P, PR_LO_REGNUM_P): Likewise.
	(PR_LO_REGS, PR_HI_REGS, PR_REGS): New reg_classes.
	(REG_CLASS_NAMES): Add entries for them.
	(REG_CLASS_CONTENTS): Likewise.  Update ALL_REGS to include VG
	and the predicate registers.
	(aarch64_sve_vg): Declare.
	(BITS_PER_SVE_VECTOR, BYTES_PER_SVE_VECTOR, BYTES_PER_SVE_PRED)
	(SVE_BYTE_MODE, MAX_COMPILE_TIME_VEC_BYTES): New macros.
	(REGMODE_NATURAL_SIZE): Define.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Handle
	SVE macros.
	* config/aarch64/aarch64.c: Include cfgrtl.h.
	(simd_immediate_info): Add a constructor for series vectors,
	and an associated step field.
	(aarch64_sve_vg): New variable.
	(aarch64_dbx_register_number): Handle VG and the predicate registers.
	(aarch64_vect_struct_mode_p, aarch64_vector_mode_p): Delete.
	(VEC_ADVSIMD, VEC_SVE_DATA, VEC_SVE_PRED, VEC_STRUCT, VEC_ANY_SVE)
	(VEC_ANY_DATA, VEC_STRUCT): New constants.
	(aarch64_advsimd_struct_mode_p, aarch64_sve_pred_mode_p)
	(aarch64_classify_vector_mode, aarch64_vector_data_mode_p)
	(aarch64_sve_data_mode_p, aarch64_sve_pred_mode)
	(aarch64_get_mask_mode): New functions.
	(aarch64_hard_regno_nregs): Handle SVE data modes for FP_REGS
	and FP_LO_REGS.  Handle PR_REGS, PR_LO_REGS and PR_HI_REGS.
	(aarch64_hard_regno_mode_ok): Handle VG.  Also handle the SVE
	predicate modes and predicate registers.  Explicitly restrict
	GPRs to modes of 16 bytes or smaller.  Only allow FP registers
	to store a vector mode if it is recognized by
	aarch64_classify_vector_mode.
	(aarch64_regmode_natural_size): New function.
	(aarch64_hard_regno_caller_save_mode): Return the original mode
	for predicates.
	(aarch64_sve_cnt_immediate_p, aarch64_output_sve_cnt_immediate)
	(aarch64_sve_addvl_addpl_immediate_p, aarch64_output_sve_addvl_addpl)
	(aarch64_sve_inc_dec_immediate_p, aarch64_output_sve_inc_dec_immediate)
	(aarch64_add_offset_1_temporaries, aarch64_offset_temporaries): New
	functions.
	(aarch64_add_offset): Add a temp2 parameter.  Assert that temp1
	does not overlap dest if the function is frame-related.  Handle
	SVE constants.
	(aarch64_split_add_offset): New function.
	(aarch64_add_sp, aarch64_sub_sp): Add temp2 parameters and pass
	them aarch64_add_offset.
	(aarch64_allocate_and_probe_stack_space): Add a temp2 parameter
	and update call to aarch64_sub_sp.
	(aarch64_add_cfa_expression): New function.
	(aarch64_expand_prologue): Pass extra temporary registers to the
	functions above.  Handle the case in which we need to emit new
	DW_CFA_expressions for registers that were originally saved
	relative to the stack pointer, but now have to be expressed
	relative to the frame pointer.
	(aarch64_output_mi_thunk): Pass extra temporary registers to the
	functions above.
	(aarch64_expand_epilogue): Likewise.  Prevent inheritance of
	IP0 and IP1 values for SVE frames.
	(aarch64_expand_vec_series): New function.
	(aarch64_expand_sve_widened_duplicate): Likewise.
	(aarch64_expand_sve_const_vector): Likewise.
	(aarch64_expand_mov_immediate): Add a gen_vec_duplicate parameter.
	Handle SVE constants.  Use emit_move_insn to move a force_const_mem
	into the register, rather than emitting a SET directly.
	(aarch64_emit_sve_pred_move, aarch64_expand_sve_mem_move)
	(aarch64_get_reg_raw_mode, offset_4bit_signed_scaled_p)
	(offset_6bit_unsigned_scaled_p, aarch64_offset_7bit_signed_scaled_p)
	(offset_9bit_signed_scaled_p): New functions.
	(aarch64_replicate_bitmask_imm): New function.
	(aarch64_bitmask_imm): Use it.
	(aarch64_cannot_force_const_mem): Reject expressions involving
	a CONST_POLY_INT.  Update call to aarch64_classify_symbol.
	(aarch64_classify_index): Handle SVE indices, by requiring
	a plain register index with a scale that matches the element size.
	(aarch64_classify_address): Handle SVE addresses.  Assert that
	the mode of the address is VOIDmode or an integer mode.
	Update call to aarch64_classify_symbol.
	(aarch64_classify_symbolic_expression): Update call to
	aarch64_classify_symbol.
	(aarch64_const_vec_all_in_range_p): New function.
	(aarch64_print_vector_float_operand): Likewise.
	(aarch64_print_operand): Handle 'N' and 'C'.  Use "zN" rather than
	"vN" for FP registers with SVE modes.  Handle (const ...) vectors
	and the FP immediates 1.0 and 0.5.
	(aarch64_print_address_internal): Handle SVE addresses.
	(aarch64_print_operand_address): Use ADDR_QUERY_ANY.
	(aarch64_regno_regclass): Handle predicate registers.
	(aarch64_secondary_reload): Handle big-endian reloads of SVE
	data modes.
	(aarch64_class_max_nregs): Handle SVE modes and predicate registers.
	(aarch64_rtx_costs): Check for ADDVL and ADDPL instructions.
	(aarch64_convert_sve_vector_bits): New function.
	(aarch64_override_options): Use it to handle -msve-vector-bits=.
	(aarch64_classify_symbol): Take the offset as a HOST_WIDE_INT
	rather than an rtx.
	(aarch64_legitimate_constant_p): Use aarch64_classify_vector_mode.
	Handle SVE vector and predicate modes.  Accept VL-based constants
	that need only one temporary register, and VL offsets that require
	no temporary registers.
	(aarch64_conditional_register_usage): Mark the predicate registers
	as fixed if SVE isn't available.
	(aarch64_vector_mode_supported_p): Use aarch64_classify_vector_mode.
	Return true for SVE vector and predicate modes.
	(aarch64_simd_container_mode): Take the number of bits as a poly_int64
	rather than an unsigned int.  Handle SVE modes.
	(aarch64_preferred_simd_mode): Update call accordingly.  Handle
	SVE modes.
	(aarch64_autovectorize_vector_sizes): Add BYTES_PER_SVE_VECTOR
	if SVE is enabled.
	(aarch64_sve_index_immediate_p, aarch64_sve_arith_immediate_p)
	(aarch64_sve_bitmask_immediate_p, aarch64_sve_dup_immediate_p)
	(aarch64_sve_cmp_immediate_p, aarch64_sve_float_arith_immediate_p)
	(aarch64_sve_float_mul_immediate_p): New functions.
	(aarch64_sve_valid_immediate): New function.
	(aarch64_simd_valid_immediate): Use it as the fallback for SVE vectors.
	Explicitly reject structure modes.  Check for INDEX constants.
	Handle PTRUE and PFALSE constants.
	(aarch64_check_zero_based_sve_index_immediate): New function.
	(aarch64_simd_imm_zero_p): Delete.
	(aarch64_mov_operand_p): Use aarch64_simd_valid_immediate for
	vector modes.  Accept constants in the range of CNT[BHWD].
	(aarch64_simd_scalar_immediate_valid_for_move): Explicitly
	ask for an Advanced SIMD mode.
	(aarch64_sve_ld1r_operand_p, aarch64_sve_ldr_operand_p): New functions.
	(aarch64_simd_vector_alignment): Handle SVE predicates.
	(aarch64_vectorize_preferred_vector_alignment): New function.
	(aarch64_simd_vector_alignment_reachable): Use it instead of
	the vector size.
	(aarch64_shift_truncation_mask): Use aarch64_vector_data_mode_p.
	(aarch64_output_sve_mov_immediate, aarch64_output_ptrue): New
	functions.
	(MAX_VECT_LEN): Delete.
	(expand_vec_perm_d): Add a vec_flags field.
	(emit_unspec2, aarch64_expand_sve_vec_perm): New functions.
	(aarch64_evpc_trn, aarch64_evpc_uzp, aarch64_evpc_zip)
	(aarch64_evpc_ext): Don't apply a big-endian lane correction
	for SVE modes.
	(aarch64_evpc_rev): Rename to...
	(aarch64_evpc_rev_local): ...this.  Use a predicated operation for SVE.
	(aarch64_evpc_rev_global): New function.
	(aarch64_evpc_dup): Enforce a 64-byte range for SVE DUP.
	(aarch64_evpc_tbl): Use MAX_COMPILE_TIME_VEC_BYTES instead of
	MAX_VECT_LEN.
	(aarch64_evpc_sve_tbl): New function.
	(aarch64_expand_vec_perm_const_1): Update after rename of
	aarch64_evpc_rev.  Handle SVE permutes too, trying
	aarch64_evpc_rev_global and using aarch64_evpc_sve_tbl rather
	than aarch64_evpc_tbl.
	(aarch64_vectorize_vec_perm_const): Initialize vec_flags.
	(aarch64_sve_cmp_operand_p, aarch64_unspec_cond_code)
	(aarch64_gen_unspec_cond, aarch64_expand_sve_vec_cmp_int)
	(aarch64_emit_unspec_cond, aarch64_emit_unspec_cond_or)
	(aarch64_emit_inverted_unspec_cond, aarch64_expand_sve_vec_cmp_float)
	(aarch64_expand_sve_vcond): New functions.
	(aarch64_modes_tieable_p): Use aarch64_vector_data_mode_p instead
	of aarch64_vector_mode_p.
	(aarch64_dwarf_poly_indeterminate_value): New function.
	(aarch64_compute_pressure_classes): Likewise.
	(aarch64_can_change_mode_class): Likewise.
	(TARGET_GET_RAW_RESULT_MODE, TARGET_GET_RAW_ARG_MODE): Redefine.
	(TARGET_VECTORIZE_PREFERRED_VECTOR_ALIGNMENT): Likewise.
	(TARGET_VECTORIZE_GET_MASK_MODE): Likewise.
	(TARGET_DWARF_POLY_INDETERMINATE_VALUE): Likewise.
	(TARGET_COMPUTE_PRESSURE_CLASSES): Likewise.
	(TARGET_CAN_CHANGE_MODE_CLASS): Likewise.
	* config/aarch64/constraints.md (Upa, Upl, Uav, Uat, Usv, Usi, Utr)
	(Uty, Dm, vsa, vsc, vsd, vsi, vsn, vsl, vsm, vsA, vsM, vsN): New
	constraints.
	(Dn, Dl, Dr): Accept const as well as const_vector.
	(Dz): Likewise.  Compare against CONST0_RTX.
	* config/aarch64/iterators.md: Refer to "Advanced SIMD" instead
	of "vector" where appropriate.
	(SVE_ALL, SVE_BH, SVE_BHS, SVE_BHSI, SVE_HSDI, SVE_HSF, SVE_SD)
	(SVE_SDI, SVE_I, SVE_F, PRED_ALL, PRED_BHS): New mode iterators.
	(UNSPEC_SEL, UNSPEC_ANDF, UNSPEC_IORF, UNSPEC_XORF, UNSPEC_COND_LT)
	(UNSPEC_COND_LE, UNSPEC_COND_EQ, UNSPEC_COND_NE, UNSPEC_COND_GE)
	(UNSPEC_COND_GT, UNSPEC_COND_LO, UNSPEC_COND_LS, UNSPEC_COND_HS)
	(UNSPEC_COND_HI, UNSPEC_COND_UO): New unspecs.
	(Vetype, VEL, Vel, VWIDE, Vwide, vw, vwcore, V_INT_EQUIV)
	(v_int_equiv): Extend to SVE modes.
	(Vesize, V128, v128, Vewtype, V_FP_EQUIV, v_fp_equiv, VPRED): New
	mode attributes.
	(LOGICAL_OR, SVE_INT_UNARY, SVE_FP_UNARY): New code iterators.
	(optab): Handle popcount, smin, smax, umin, umax, abs and sqrt.
	(logical_nn, lr, sve_int_op, sve_fp_op): New code attributs.
	(LOGICALF, OPTAB_PERMUTE, UNPACK, UNPACK_UNSIGNED, SVE_COND_INT_CMP)
	(SVE_COND_FP_CMP): New int iterators.
	(perm_hilo): Handle the new unpack unspecs.
	(optab, logicalf_op, su, perm_optab, cmp_op, imm_con): New int
	attributes.
	* config/aarch64/predicates.md (aarch64_sve_cnt_immediate)
	(aarch64_sve_addvl_addpl_immediate, aarch64_split_add_offset_immediate)
	(aarch64_pluslong_or_poly_operand, aarch64_nonmemory_operand)
	(aarch64_equality_operator, aarch64_constant_vector_operand)
	(aarch64_sve_ld1r_operand, aarch64_sve_ldr_operand): New predicates.
	(aarch64_sve_nonimmediate_operand): Likewise.
	(aarch64_sve_general_operand): Likewise.
	(aarch64_sve_dup_operand, aarch64_sve_arith_immediate): Likewise.
	(aarch64_sve_sub_arith_immediate, aarch64_sve_inc_dec_immediate)
	(aarch64_sve_logical_immediate, aarch64_sve_mul_immediate): Likewise.
	(aarch64_sve_dup_immediate, aarch64_sve_cmp_vsc_immediate): Likewise.
	(aarch64_sve_cmp_vsd_immediate, aarch64_sve_index_immediate): Likewise.
	(aarch64_sve_float_arith_immediate): Likewise.
	(aarch64_sve_float_arith_with_sub_immediate): Likewise.
	(aarch64_sve_float_mul_immediate, aarch64_sve_arith_operand): Likewise.
	(aarch64_sve_add_operand, aarch64_sve_logical_operand): Likewise.
	(aarch64_sve_lshift_operand, aarch64_sve_rshift_operand): Likewise.
	(aarch64_sve_mul_operand, aarch64_sve_cmp_vsc_operand): Likewise.
	(aarch64_sve_cmp_vsd_operand, aarch64_sve_index_operand): Likewise.
	(aarch64_sve_float_arith_operand): Likewise.
	(aarch64_sve_float_arith_with_sub_operand): Likewise.
	(aarch64_sve_float_mul_operand): Likewise.
	(aarch64_sve_vec_perm_operand): Likewise.
	(aarch64_pluslong_operand): Include aarch64_sve_addvl_addpl_immediate.
	(aarch64_mov_operand): Accept const_poly_int and const_vector.
	(aarch64_simd_lshift_imm, aarch64_simd_rshift_imm): Accept const
	as well as const_vector.
	(aarch64_simd_imm_zero, aarch64_simd_imm_minus_one): Move earlier
	in file.  Use CONST0_RTX and CONSTM1_RTX.
	(aarch64_simd_or_scalar_imm_zero): Likewise.  Add match_codes.
	(aarch64_simd_reg_or_zero): Accept const as well as const_vector.
	Use aarch64_simd_imm_zero.
	* config/aarch64/aarch64-sve.md: New file.
	* config/aarch64/aarch64.md: Include it.
	(VG_REGNUM, P0_REGNUM, P7_REGNUM, P15_REGNUM): New register numbers.
	(UNSPEC_REV, UNSPEC_LD1_SVE, UNSPEC_ST1_SVE, UNSPEC_MERGE_PTRUE)
	(UNSPEC_PTEST_PTRUE, UNSPEC_UNPACKSHI, UNSPEC_UNPACKUHI)
	(UNSPEC_UNPACKSLO, UNSPEC_UNPACKULO, UNSPEC_PACK)
	(UNSPEC_FLOAT_CONVERT, UNSPEC_WHILE_LO): New unspec constants.
	(sve): New attribute.
	(enabled): Disable instructions with the sve attribute unless
	TARGET_SVE.
	(movqi, movhi): Pass CONST_POLY_INT operaneds through
	aarch64_expand_mov_immediate.
	(*mov<mode>_aarch64, *movsi_aarch64, *movdi_aarch64): Handle
	CNT[BHSD] immediates.
	(movti): Split CONST_POLY_INT moves into two halves.
	(add<mode>3): Accept aarch64_pluslong_or_poly_operand.
	Split additions that need a temporary here if the destination
	is the stack pointer.
	(*add<mode>3_aarch64): Handle ADDVL and ADDPL immediates.
	(*add<mode>3_poly_1): New instruction.
	(set_clobber_cc): New expander.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* simplify-rtx.c (simplify_immed_subreg): Add an inner_bytes
	parameter and use it instead of GET_MODE_SIZE (innermode).  Use
	inner_bytes * BITS_PER_UNIT instead of GET_MODE_BITSIZE (innermode).
	Use CEIL (inner_bytes, GET_MODE_UNIT_SIZE (innermode)) instead of
	GET_MODE_NUNITS (innermode).  Also add a first_elem parameter.
	Change innermode from fixed_mode_size to machine_mode.
	(simplify_subreg): Update call accordingly.  Handle a constant-sized
	subreg of a variable-length CONST_VECTOR.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-ssa-address.c (mem_ref_valid_without_offset_p): New function.
	(add_offset_to_base): New function, split out from...
	(create_mem_ref): ...here.  When handling a scale other than 1,
	check first whether the address is valid without the offset.
	Add it into the base if so, leaving the index and scale as-is.

2018-01-12  Jakub Jelinek  <jakub@redhat.com>

	PR c++/83778
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): Call
	fold_for_warn before checking if arg2 is INTEGER_CST.

2018-01-12  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (load_multiple_operation): Delete.
	(store_multiple_operation): Delete.
	* config/rs6000/rs6000-cpus.def (601): Remove MASK_STRING.
	* config/rs6000/rs6000-protos.h (rs6000_output_load_multiple): Delete.
	* config/rs6000/rs6000-string.c (expand_block_move): Delete everything
	guarded by TARGET_STRING.
	(rs6000_output_load_multiple): Delete.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Delete
	OPTION_MASK_STRING / TARGET_STRING handling.
	(print_operand) <'N', 'O'>: Add comment that these are unused now.
	(const rs6000_opt_masks) <"string">: Change mask to 0.
	* config/rs6000/rs6000.h (TARGET_DEFAULT): Remove MASK_STRING.
	(MASK_STRING): Delete.
	* config/rs6000/rs6000.md (*mov<mode>_string): Delete TARGET_STRING
	parts.  Simplify.
	(load_multiple): Delete.
	(*ldmsi8): Delete.
	(*ldmsi7): Delete.
	(*ldmsi6): Delete.
	(*ldmsi5): Delete.
	(*ldmsi4): Delete.
	(*ldmsi3): Delete.
	(store_multiple): Delete.
	(*stmsi8): Delete.
	(*stmsi7): Delete.
	(*stmsi6): Delete.
	(*stmsi5): Delete.
	(*stmsi4): Delete.
	(*stmsi3): Delete.
	(movmemsi_8reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_6reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_4reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_2reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_1reg): Delete.
	(corresponding unnamed define_insn): Delete.
	* config/rs6000/rs6000.opt (mno-string): New.
	(mstring): Replace by deprecation warning stub.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete -mstring.

2018-01-12  Jakub Jelinek  <jakub@redhat.com>

	* regrename.c (regrename_do_replace): If replacing the same
	reg multiple times, try to reuse last created gen_raw_REG.

	PR debug/81155
	* bb-reorder.c (pass_partition_blocks::gate): In lto don't partition
	main to workaround a bug in GDB.

2018-01-12  Tom de Vries  <tom@codesourcery.com>

	PR target/83737
	* config.gcc (nvptx*-*-*): Set use_gcc_stdint=wrap.

2018-01-12  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/80481
	* ira-color.c (get_cap_member): New function.
	(allocnos_conflict_by_live_ranges_p): Use it.
	(slot_coalesced_allocno_live_ranges_intersect_p): Add assert.
	(setup_slot_coalesced_allocno_live_ranges): Ditto.

2018-01-12  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* config/alpha/alpha.md (*saddsi_1): New insn_ans_split pattern.
	(*saddl_se_1): Ditto.
	(*ssubsi_1): Ditto.
	(*ssubl_se_1): Ditto.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-predcom.c (aff_combination_dr_offset): Use wi::to_poly_widest
	rather than wi::to_widest for DR_INITs.
	* tree-vect-data-refs.c (vect_find_same_alignment_drs): Use
	wi::to_poly_offset rather than wi::to_offset for DR_INIT.
	(vect_analyze_data_ref_accesses): Require both DR_INITs to be
	INTEGER_CSTs.
	(vect_analyze_group_access_1): Note that here.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vectorizer.c (get_vec_alignment_for_array_type): Handle
	polynomial type sizes.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* gimplify.c (gimple_add_tmp_var_fn): Allow variables to have a
	poly_uint64 size, rather than requiring an unsigned HOST_WIDE_INT size.
	(gimple_add_tmp_var): Likewise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* gimple.c (gimple_alloc_counts): Use uint64_t instead of int.
	(gimple_alloc_sizes): Likewise.
	(dump_gimple_statistics): Use PRIu64 in printf format.
	* gimple.h: Change uint64_t to int.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* tree-core.h: Use uint64_t instead of int.
	* tree.c (tree_node_counts): Likewise.
	(tree_node_sizes): Likewise.
	(dump_tree_statistics): Use PRIu64 in printf format.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* Makefile.in: As qsort_chk is implemented in vec.c, add
	vec.o to linkage of gencfn-macros.
	* tree.c (build_new_poly_int_cst): Add CXX_MEM_STAT_INFO as it's
	passing the info to record_node_allocation_statistics.
	(test_vector_cst_patterns): Add CXX_MEM_STAT_INFO to declaration
	and pass the info.
	* ggc-common.c (struct ggc_usage): Add operator== and use
	it in operator< and compare function.
	* mem-stats.h (struct mem_usage): Likewise.
	* vec.c (struct vec_usage): Remove operator< and compare
	function. Can be simply inherited.

2018-01-12  Martin Jambor  <mjambor@suse.cz>

	PR target/81616
	* params.def: New parameter PARAM_AVOID_FMA_MAX_BITS.
	* tree-ssa-math-opts.c: Include domwalk.h.
	(convert_mult_to_fma_1): New function.
	(fma_transformation_info): New type.
	(fma_deferring_state): Likewise.
	(cancel_fma_deferring): New function.
	(result_of_phi): Likewise.
	(last_fma_candidate_feeds_initial_phi): Likewise.
	(convert_mult_to_fma): Added deferring logic, split actual
	transformation to convert_mult_to_fma_1.
	(math_opts_dom_walker): New type.
	(math_opts_dom_walker::after_dom_children): New method, body moved
	here from pass_optimize_widening_mul::execute, added deferring logic
	bits.
	(pass_optimize_widening_mul::execute): Moved most of code to
	math_opts_dom_walker::after_dom_children.
	* config/i386/x86-tune.def (X86_TUNE_AVOID_128FMA_CHAINS): New.
	* config/i386/i386.c (ix86_option_override_internal): Added
	maybe_setting of PARAM_AVOID_FMA_MAX_BITS.

2018-01-12  Richard Biener  <rguenther@suse.de>

	PR debug/83157
	* dwarf2out.c (gen_variable_die): Do not reset old_die for
	inline instance vars.

2018-01-12  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/81819
	* config/rx/rx.c (rx_is_restricted_memory_address):
	Handle SUBREG case.

2018-01-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/80846
	* target.def (split_reduction): New target hook.
	* targhooks.c (default_split_reduction): New function.
	* targhooks.h (default_split_reduction): Declare.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): If the
	target requests first reduce vectors by combining low and high
	parts.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Adjust.
	(get_vectype_for_scalar_type_and_size): Export.
	* tree-vectorizer.h (get_vectype_for_scalar_type_and_size): Declare.
	* doc/tm.texi.in (TARGET_VECTORIZE_SPLIT_REDUCTION): Document.
	* doc/tm.texi: Regenerate.
	* config/i386/i386.c (ix86_split_reduction): Implement
	TARGET_VECTORIZE_SPLIT_REDUCTION.

2018-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/83368
	* config/sparc/sparc.h (PIC_OFFSET_TABLE_REGNUM): Set to INVALID_REGNUM
	in PIC mode except for TARGET_VXWORKS_RTP.
	* config/sparc/sparc.c: Include cfgrtl.h.
	(TARGET_INIT_PIC_REG): Define.
	(TARGET_USE_PSEUDO_PIC_REG): Likewise.
	(sparc_pic_register_p): New predicate.
	(sparc_legitimate_address_p): Use it.
	(sparc_legitimize_pic_address): Likewise.
	(sparc_delegitimize_address): Likewise.
	(sparc_mode_dependent_address_p): Likewise.
	(gen_load_pcrel_sym): Remove 4th parameter.
	(load_got_register): Adjust call to above.  Remove obsolete stuff.
	(sparc_expand_prologue): Do not call load_got_register here.
	(sparc_flat_expand_prologue): Likewise.
	(sparc_output_mi_thunk): Set the pic_offset_table_rtx object.
	(sparc_use_pseudo_pic_reg): New function.
	(sparc_init_pic_reg): Likewise.
	* config/sparc/sparc.md (vxworks_load_got): Set the GOT register.
	(builtin_setjmp_receiver): Enable only for TARGET_VXWORKS_RTP.

2018-01-12  Christophe Lyon  <christophe.lyon@linaro.org>

	* doc/sourcebuild.texi (Effective-Target Keywords, Other attributes):
	Add item for branch_cost.

2018-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/83565
	* rtlanal.c (nonzero_bits1): On WORD_REGISTER_OPERATIONS machines, do
	not extend the result to a larger mode for rotate operations.
	(num_sign_bit_copies1): Likewise.

2018-01-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR target/40411
	* config/sol2.h (STARTFILE_ARCH_SPEC): Don't use with -shared or
	-symbolic.
	Use values-Xc.o for -pedantic.
	Link with values-xpg4.o for C90, values-xpg6.o otherwise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	PR ipa/83054
	* ipa-devirt.c (final_warning_record::grow_type_warnings):
	New function.
	(possible_polymorphic_call_targets): Use it.
	(ipa_devirt): Likewise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* profile-count.h (enum profile_quality): Use 0 as invalid
	enum value of profile_quality.

2018-01-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* doc/invoke.texi (NDS32 Options): Add -mext-perf, -mext-perf2 and
	-mext-string options.

2018-01-12  Richard Biener  <rguenther@suse.de>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Process
	DECL_DEBUG_EXPR conditional on DECL_HAS_DEBUG_EXPR_P.
	* tree-streamer-in.c (lto_input_ts_decl_common_tree_pointers):
	Likewise.
	* tree-streamer-out.c (write_ts_decl_common_tree_pointers): Likewise.

2018-01-11  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* configure.ac (--with-long-double-format): Add support for the
	configuration option to change the default long double format on
	PowerPC systems.
	* config.gcc (powerpc*-linux*-*): Likewise.
	* configure: Regenerate.
	* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): If long
	double is IEEE, define __KC__ and __KF__ to allow floatn.h to be
	used without modification.

2018-01-11  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000-builtin.def (BU_P7_MISC_X): New #define.
	(SPEC_BARRIER): New instantiation of BU_P7_MISC_X.
	* config/rs6000/rs6000.c (rs6000_expand_builtin): Handle
	MISC_BUILTIN_SPEC_BARRIER.
	(rs6000_init_builtins): Likewise.
	* config/rs6000/rs6000.md (UNSPECV_SPEC_BARRIER): New UNSPECV
	enum value.
	(speculation_barrier): New define_insn.
	* doc/extend.texi: Document __builtin_speculation_barrier.

2018-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/83203
	* config/i386/i386.c (ix86_expand_vector_init_one_nonzero): If one_var
	is 0, for V{8,16}S[IF] and V[48]D[IF]mode use gen_vec_set<mode>_0.
	* config/i386/sse.md (VI8_AVX_AVX512F, VI4F_256_512): New mode
	iterators.
	(ssescalarmodesuffix): Add 512-bit vectors.  Use "d" or "q" for
	integral modes instead of "ss" and "sd".
	(vec_set<mode>_0): New define_insns for 256-bit and 512-bit
	vectors with 32-bit and 64-bit elements.
	(vecdupssescalarmodesuffix): New mode attribute.
	(vec_dup<mode>): Use it.

2018-01-11  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83330
	* config/i386/i386.c (ix86_compute_frame_layout): Align stack
	frame if argument is passed on stack.

2018-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/82682
	* ree.c (combine_reaching_defs): Optimize also
	reg2=exp; reg1=reg2; reg2=any_extend(reg1); into
	reg2=any_extend(exp); reg1=reg2;, formatting fix.

2018-01-11  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83189
	* gimple-ssa-isolate-paths.c (isolate_path): Fix profile update.

2018-01-11  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83718
	* tree-inline.c (copy_cfg_body): Adjust num&den for scaling
	after they are computed.

2018-01-11  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/83695
	* gimple-loop-linterchange.cc
	(tree_loop_interchange::interchange_loops): Call scev_reset_htab to
	reset cached scev information after interchange.
	(pass_linterchange::execute): Remove call to scev_reset_htab.

2018-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm_neon.h (vfmlal_lane_low_u32, vfmlal_lane_high_u32,
	vfmlalq_laneq_low_u32, vfmlalq_lane_low_u32, vfmlal_laneq_low_u32,
	vfmlalq_laneq_high_u32, vfmlalq_lane_high_u32, vfmlal_laneq_high_u32,
	vfmlsl_lane_low_u32, vfmlsl_lane_high_u32, vfmlslq_laneq_low_u32,
	vfmlslq_lane_low_u32, vfmlsl_laneq_low_u32, vfmlslq_laneq_high_u32,
	vfmlslq_lane_high_u32, vfmlsl_laneq_high_u32): Define.
	* config/arm/arm_neon_builtins.def (vfmal_lane_low,
	vfmal_lane_lowv4hf, vfmal_lane_lowv8hf, vfmal_lane_high,
	vfmal_lane_highv4hf, vfmal_lane_highv8hf, vfmsl_lane_low,
	vfmsl_lane_lowv4hf, vfmsl_lane_lowv8hf, vfmsl_lane_high,
	vfmsl_lane_highv4hf, vfmsl_lane_highv8hf): New sets of builtins.
	* config/arm/iterators.md (VFMLSEL2, vfmlsel2): New mode attributes.
	(V_lane_reg): Likewise.
	* config/arm/neon.md (neon_vfm<vfml_op>l_lane_<vfml_half><VCVTF:mode>):
	New define_expand.
	(neon_vfm<vfml_op>l_lane_<vfml_half><vfmlsel2><mode>): Likewise.
	(vfmal_lane_low<mode>_intrinsic,
	vfmal_lane_low<vfmlsel2><mode>_intrinsic,
	vfmal_lane_high<vfmlsel2><mode>_intrinsic,
	vfmal_lane_high<mode>_intrinsic, vfmsl_lane_low<mode>_intrinsic,
	vfmsl_lane_low<vfmlsel2><mode>_intrinsic,
	vfmsl_lane_high<vfmlsel2><mode>_intrinsic,
	vfmsl_lane_high<mode>_intrinsic): New define_insns.

2018-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (fp16fml): New feature.
	(ALL_SIMD): Add fp16fml.
	(armv8.2-a): Add fp16fml as an option.
	(armv8.3-a): Likewise.
	(armv8.4-a): Add fp16fml as part of fp16.
	* config/arm/arm.h (TARGET_FP16FML): Define.
	* config/arm/arm-c.c (arm_cpu_builtins): Define __ARM_FEATURE_FP16_FML
	when appropriate.
	* config/arm/arm-modes.def (V2HF): Define.
	* config/arm/arm_neon.h (vfmlal_low_u32, vfmlsl_low_u32,
	vfmlal_high_u32, vfmlsl_high_u32, vfmlalq_low_u32,
	vfmlslq_low_u32, vfmlalq_high_u32, vfmlslq_high_u32): Define.
	* config/arm/arm_neon_builtins.def (vfmal_low, vfmal_high,
	vfmsl_low, vfmsl_high): New set of builtins.
	* config/arm/iterators.md (PLUSMINUS): New code iterator.
	(vfml_op): New code attribute.
	(VFMLHALVES): New int iterator.
	(VFML, VFMLSEL): New mode attributes.
	(V_reg): Define mapping for V2HF.
	(V_hi, V_lo): New mode attributes.
	(VF_constraint): Likewise.
	(vfml_half, vfml_half_selector): New int attributes.
	* config/arm/neon.md (neon_vfm<vfml_op>l_<vfml_half><mode>): New
	define_expand.
	(vfmal_low<mode>_intrinsic, vfmsl_high<mode>_intrinsic,
	vfmal_high<mode>_intrinsic, vfmsl_low<mode>_intrinsic):
	New define_insn.
	* config/arm/t-arm-elf (v8_fps): Add fp16fml.
	* config/arm/t-multilib (v8_2_a_simd_variants): Add fp16fml.
	* config/arm/unspecs.md (UNSPEC_VFML_LO, UNSPEC_VFML_HI): New unspecs.
	* doc/invoke.texi (ARM Options): Document fp16fml.  Update armv8.4-a
	documentation.
	* doc/sourcebuild.texi (arm_fp16fml_neon_ok, arm_fp16fml_neon):
	Document new effective target and option set.

2018-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (armv8_4): New feature.
	(ARMv8_4a): New fgroup.
	(armv8.4-a): New arch.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/t-aprofile: Add matching rules for -march=armv8.4-a.
	* config/arm/t-arm-elf (all_v8_archs): Add armv8.4-a.
	* config/arm/t-multilib (v8_4_a_simd_variants): New variable.
	Add matching rules for -march=armv8.4-a and extensions.
	* doc/invoke.texi (ARM Options): Document -march=armv8.4-a.

2018-01-11  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/81821
	* config/rx/rx.md (BW): New mode attribute.
	(sync_lock_test_and_setsi): Add mode suffix to insn output.

2018-01-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83435
	* graphite.c (canonicalize_loop_form): Ignore fake loop exit edges.
	* graphite-scop-detection.c (scop_detection::get_sese): Likewise.
	* tree-vrp.c (add_assert_info): Drop TREE_OVERFLOW if they appear.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64.c (aarch64_address_info): Add a const_offset
	field.
	(aarch64_classify_address): Initialize it.  Track polynomial offsets.
	(aarch64_print_address_internal): Use it to check for a zero offset.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-modes.def (NUM_POLY_INT_COEFFS): Set to 2.
	* config/aarch64/aarch64-protos.h (aarch64_initial_elimination_offset):
	Return a poly_int64 rather than a HOST_WIDE_INT.
	(aarch64_offset_7bit_signed_scaled_p): Take the offset as a poly_int64
	rather than a HOST_WIDE_INT.
	* config/aarch64/aarch64.h (aarch64_frame): Protect with
	HAVE_POLY_INT_H rather than HOST_WIDE_INT.  Change locals_offset,
	hard_fp_offset, frame_size, initial_adjust, callee_offset and
	final_offset from HOST_WIDE_INT to poly_int64.
	* config/aarch64/aarch64-builtins.c (aarch64_simd_expand_args): Use
	to_constant when getting the number of units in an Advanced SIMD
	mode.
	(aarch64_builtin_vectorized_function): Check for a constant number
	of units.
	* config/aarch64/aarch64-simd.md (mov<mode>): Handle polynomial
	GET_MODE_SIZE.
	(aarch64_ld<VSTRUCT:nregs>_lane<VALLDIF:mode>): Use the nunits
	attribute instead of GET_MODE_NUNITS.
	* config/aarch64/aarch64.c (aarch64_hard_regno_nregs)
	(aarch64_class_max_nregs): Use the constant_lowest_bound of the
	GET_MODE_SIZE for fixed-size registers.
	(aarch64_const_vec_all_same_in_range_p): Use const_vec_duplicate_p.
	(aarch64_hard_regno_call_part_clobbered, aarch64_classify_index)
	(aarch64_mode_valid_for_sched_fusion_p, aarch64_classify_address)
	(aarch64_legitimize_address_displacement, aarch64_secondary_reload)
	(aarch64_print_operand, aarch64_print_address_internal)
	(aarch64_address_cost, aarch64_rtx_costs, aarch64_register_move_cost)
	(aarch64_short_vector_p, aapcs_vfp_sub_candidate)
	(aarch64_simd_attr_length_rglist, aarch64_operands_ok_for_ldpstp):
	Handle polynomial GET_MODE_SIZE.
	(aarch64_hard_regno_caller_save_mode): Likewise.  Return modes
	wider than SImode without modification.
	(tls_symbolic_operand_type): Use strip_offset instead of split_const.
	(aarch64_pass_by_reference, aarch64_layout_arg, aarch64_pad_reg_upward)
	(aarch64_gimplify_va_arg_expr): Assert that we don't yet handle
	passing and returning SVE modes.
	(aarch64_function_value, aarch64_layout_arg): Use gen_int_mode
	rather than GEN_INT.
	(aarch64_emit_probe_stack_range): Take the size as a poly_int64
	rather than a HOST_WIDE_INT, but call sorry if it isn't constant.
	(aarch64_allocate_and_probe_stack_space): Likewise.
	(aarch64_layout_frame): Cope with polynomial offsets.
	(aarch64_save_callee_saves, aarch64_restore_callee_saves): Take the
	start_offset as a poly_int64 rather than a HOST_WIDE_INT.  Track
	polynomial offsets.
	(offset_9bit_signed_unscaled_p, offset_12bit_unsigned_scaled_p)
	(aarch64_offset_7bit_signed_scaled_p): Take the offset as a
	poly_int64 rather than a HOST_WIDE_INT.
	(aarch64_get_separate_components, aarch64_process_components)
	(aarch64_expand_prologue, aarch64_expand_epilogue)
	(aarch64_use_return_insn_p): Handle polynomial frame offsets.
	(aarch64_anchor_offset): New function, split out from...
	(aarch64_legitimize_address): ...here.
	(aarch64_builtin_vectorization_cost): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(aarch64_simd_check_vect_par_cnst_half): Handle polynomial
	GET_MODE_NUNITS.
	(aarch64_simd_make_constant, aarch64_expand_vector_init): Get the
	number of elements from the PARALLEL rather than the mode.
	(aarch64_shift_truncation_mask): Use GET_MODE_UNIT_BITSIZE
	rather than GET_MODE_BITSIZE.
	(aarch64_evpc_trn, aarch64_evpc_uzp, aarch64_evpc_ext)
	(aarch64_evpc_rev, aarch64_evpc_dup, aarch64_evpc_zip)
	(aarch64_expand_vec_perm_const_1): Handle polynomial
	d->perm.length () and d->perm elements.
	(aarch64_evpc_tbl): Likewise.  Use nelt rather than GET_MODE_NUNITS.
	Apply to_constant to d->perm elements.
	(aarch64_simd_valid_immediate, aarch64_vec_fpconst_pow_of_2): Handle
	polynomial CONST_VECTOR_NUNITS.
	(aarch64_move_pointer): Take amount as a poly_int64 rather
	than an int.
	(aarch64_progress_pointer): Avoid temporary variable.
	* config/aarch64/aarch64.md (aarch64_<crc_variant>): Use
	the mode attribute instead of GET_MODE.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64.c (aarch64_force_temporary): Assert that
	x exists before using it.
	(aarch64_add_constant_internal): Rename to...
	(aarch64_add_offset_1): ...this.  Replace regnum with separate
	src and dest rtxes.  Handle the case in which they're different,
	including when the offset is zero.  Replace scratchreg with an rtx.
	Use 2 additions if there is no spare register into which we can
	move a 16-bit constant.
	(aarch64_add_constant): Delete.
	(aarch64_add_offset): Replace reg with separate src and dest
	rtxes.  Take a poly_int64 offset instead of a HOST_WIDE_INT.
	Use aarch64_add_offset_1.
	(aarch64_add_sp, aarch64_sub_sp): Take the scratch register as
	an rtx rather than an int.  Take the delta as a poly_int64
	rather than a HOST_WIDE_INT.  Use aarch64_add_offset.
	(aarch64_expand_mov_immediate): Update uses of aarch64_add_offset.
	(aarch64_expand_prologue): Update calls to aarch64_sub_sp,
	aarch64_allocate_and_probe_stack_space and aarch64_add_offset.
	(aarch64_expand_epilogue): Update calls to aarch64_add_offset
	and aarch64_add_sp.
	(aarch64_output_mi_thunk): Use aarch64_add_offset rather than
	aarch64_add_constant.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_reinterpret_float_as_int):
	Use scalar_float_mode.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-simd.md
	(aarch64_fml<f16mac1>l<f16quad>_low<mode>): Avoid GET_MODE_NUNITS.
	(aarch64_fml<f16mac1>l<f16quad>_high<mode>): Likewise.
	(aarch64_fml<f16mac1>l_lane_lowv2sf): Likewise.
	(aarch64_fml<f16mac1>l_lane_highv2sf): Likewise.
	(aarch64_fml<f16mac1>lq_laneq_lowv4sf): Likewise.
	(aarch64_fml<f16mac1>lq_laneq_highv4sf): Likewise.
	(aarch64_fml<f16mac1>l_laneq_lowv2sf): Likewise.
	(aarch64_fml<f16mac1>l_laneq_highv2sf): Likewise.
	(aarch64_fml<f16mac1>lq_lane_lowv4sf): Likewise.
	(aarch64_fml<f16mac1>lq_lane_highv4sf): Likewise.

2018-01-11  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/83514
	* config/arm/arm.c (arm_declare_function_name): Set arch_to_print if
	targ_options->x_arm_arch_string is non NULL.

2018-01-11  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64.h
	(AARCH64_FL_FOR_ARCH8_4): Add  AARCH64_FL_DOTPROD.

2018-01-11  Sudakshina Das  <sudi.das@arm.com>

	PR target/82096
	* expmed.c (emit_store_flag_force): Swap if const op0
	and change VOIDmode to mode of op0.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	PR rtl-optimization/83761
	* caller-save.c (replace_reg_with_saved_mem): Pass bits rather
	than bytes to mode_for_size.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83189
	* gfortran.fortran-torture/compile/pr83189.f90: New testcase.
	* tree-ssa-loop-manip.c (tree_transform_and_unroll_loop): Handle zero
	profile.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83575
	* cfgrtl.c (rtl_verify_edges): Only verify fixability of partition
	when in layout mode.
	(cfg_layout_finalize): Do not verify cfg before we are out of layout.
	* cfgcleanup.c (try_optimize_cfg): Only verify flow info when doing
	partition fixup.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-modes.def (V2HF): New VECTOR_MODE.
	* config/aarch64/aarch64-option-extension.def: Add
	AARCH64_OPT_EXTENSION of 'fp16fml'.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_FP16_FML): Define if TARGET_F16FML is true.
	* config/aarch64/predicates.md (aarch64_lane_imm3): New predicate.
	* config/aarch64/constraints.md (Ui7): New constraint.
	* config/aarch64/iterators.md (VFMLA_W): New mode iterator.
	(VFMLA_SEL_W): Ditto.
	(f16quad): Ditto.
	(f16mac1): Ditto.
	(VFMLA16_LOW): New int iterator.
	(VFMLA16_HIGH): Ditto.
	(UNSPEC_FMLAL): New unspec.
	(UNSPEC_FMLSL): Ditto.
	(UNSPEC_FMLAL2): Ditto.
	(UNSPEC_FMLSL2): Ditto.
	(f16mac): New code attribute.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_fmlal_lowv2sf): Ditto.
	(aarch64_fmlsl_lowv2sf): Ditto.
	(aarch64_fmlalq_lowv4sf): Ditto.
	(aarch64_fmlslq_lowv4sf): Ditto.
	(aarch64_fmlal_highv2sf): Ditto.
	(aarch64_fmlsl_highv2sf): Ditto.
	(aarch64_fmlalq_highv4sf): Ditto.
	(aarch64_fmlslq_highv4sf): Ditto.
	(aarch64_fmlal_lane_lowv2sf): Ditto.
	(aarch64_fmlsl_lane_lowv2sf): Ditto.
	(aarch64_fmlal_laneq_lowv2sf): Ditto.
	(aarch64_fmlsl_laneq_lowv2sf): Ditto.
	(aarch64_fmlalq_lane_lowv4sf): Ditto.
	(aarch64_fmlsl_lane_lowv4sf): Ditto.
	(aarch64_fmlalq_laneq_lowv4sf): Ditto.
	(aarch64_fmlsl_laneq_lowv4sf): Ditto.
	(aarch64_fmlal_lane_highv2sf): Ditto.
	(aarch64_fmlsl_lane_highv2sf): Ditto.
	(aarch64_fmlal_laneq_highv2sf): Ditto.
	(aarch64_fmlsl_laneq_highv2sf): Ditto.
	(aarch64_fmlalq_lane_highv4sf): Ditto.
	(aarch64_fmlsl_lane_highv4sf): Ditto.
	(aarch64_fmlalq_laneq_highv4sf): Ditto.
	(aarch64_fmlsl_laneq_highv4sf): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_fml<f16mac1>l<f16quad>_low<mode>): New pattern.
	(aarch64_fml<f16mac1>l<f16quad>_high<mode>): Ditto.
	(aarch64_simd_fml<f16mac1>l<f16quad>_low<mode>): Ditto.
	(aarch64_simd_fml<f16mac1>l<f16quad>_high<mode>): Ditto.
	(aarch64_fml<f16mac1>l_lane_lowv2sf): Ditto.
	(aarch64_fml<f16mac1>l_lane_highv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_lane_lowv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_lane_highv2sf): Ditto.
	(aarch64_fml<f16mac1>lq_laneq_lowv4sf): Ditto.
	(aarch64_fml<f16mac1>lq_laneq_highv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_laneq_lowv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_laneq_highv4sf): Ditto.
	(aarch64_fml<f16mac1>l_laneq_lowv2sf): Ditto.
	(aarch64_fml<f16mac1>l_laneq_highv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_laneq_lowv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_laneq_highv2sf): Ditto.
	(aarch64_fml<f16mac1>lq_lane_lowv4sf): Ditto.
	(aarch64_fml<f16mac1>lq_lane_highv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_lane_lowv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_lane_highv4sf): Ditto.
	* config/aarch64/arm_neon.h (vfmlal_low_u32): New intrinsic.
	(vfmlsl_low_u32): Ditto.
	(vfmlalq_low_u32): Ditto.
	(vfmlslq_low_u32): Ditto.
	(vfmlal_high_u32): Ditto.
	(vfmlsl_high_u32): Ditto.
	(vfmlalq_high_u32): Ditto.
	(vfmlslq_high_u32): Ditto.
	(vfmlal_lane_low_u32): Ditto.
	(vfmlsl_lane_low_u32): Ditto.
	(vfmlal_laneq_low_u32): Ditto.
	(vfmlsl_laneq_low_u32): Ditto.
	(vfmlalq_lane_low_u32): Ditto.
	(vfmlslq_lane_low_u32): Ditto.
	(vfmlalq_laneq_low_u32): Ditto.
	(vfmlslq_laneq_low_u32): Ditto.
	(vfmlal_lane_high_u32): Ditto.
	(vfmlsl_lane_high_u32): Ditto.
	(vfmlal_laneq_high_u32): Ditto.
	(vfmlsl_laneq_high_u32): Ditto.
	(vfmlalq_lane_high_u32): Ditto.
	(vfmlslq_lane_high_u32): Ditto.
	(vfmlalq_laneq_high_u32): Ditto.
	(vfmlslq_laneq_high_u32): Ditto.
	* config/aarch64/aarch64.h (AARCH64_FL_F16SML): New flag.
	(AARCH64_FL_FOR_ARCH8_4): New.
	(AARCH64_ISA_F16FML): New ISA flag.
	(TARGET_F16FML): New feature flag for fp16fml.
	(doc/invoke.texi): Document new fp16fml option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-builtins.c:
	(aarch64_types_ternopu_imm_qualifiers, TYPES_TERNOPUI): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_SHA3): Define if TARGET_SHA3 is true.
	* config/aarch64/aarch64.h (AARCH64_FL_SHA3): New flags.
	(AARCH64_ISA_SHA3): New ISA flag.
	(TARGET_SHA3): New feature flag for sha3.
	* config/aarch64/iterators.md (sha512_op): New int attribute.
	(CRYPTO_SHA512): New int iterator.
	(UNSPEC_SHA512H): New unspec.
	(UNSPEC_SHA512H2): Ditto.
	(UNSPEC_SHA512SU0): Ditto.
	(UNSPEC_SHA512SU1): Ditto.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_crypto_sha512hqv2di): New builtin.
	(aarch64_crypto_sha512h2qv2di): Ditto.
	(aarch64_crypto_sha512su0qv2di): Ditto.
	(aarch64_crypto_sha512su1qv2di): Ditto.
	(aarch64_eor3qv8hi): Ditto.
	(aarch64_rax1qv2di): Ditto.
	(aarch64_xarqv2di): Ditto.
	(aarch64_bcaxqv8hi): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_crypto_sha512h<sha512_op>qv2di): New pattern.
	(aarch64_crypto_sha512su0qv2di): Ditto.
	(aarch64_crypto_sha512su1qv2di): Ditto.
	(aarch64_eor3qv8hi): Ditto.
	(aarch64_rax1qv2di): Ditto.
	(aarch64_xarqv2di): Ditto.
	(aarch64_bcaxqv8hi): Ditto.
	* config/aarch64/arm_neon.h (vsha512hq_u64): New intrinsic.
	(vsha512h2q_u64): Ditto.
	(vsha512su0q_u64): Ditto.
	(vsha512su1q_u64): Ditto.
	(veor3q_u16): Ditto.
	(vrax1q_u64): Ditto.
	(vxarq_u64): Ditto.
	(vbcaxq_u16): Ditto.
	* config/arm/types.md (crypto_sha512): New type attribute.
	(crypto_sha3): Ditto.
	(doc/invoke.texi): Document new sha3 option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-builtins.c:
	(aarch64_types_quadopu_imm_qualifiers, TYPES_QUADOPUI): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_SM3): Define if TARGET_SM4 is true.
	(__ARM_FEATURE_SM4): Define if TARGET_SM4 is true.
	* config/aarch64/aarch64.h (AARCH64_FL_SM4): New flags.
	(AARCH64_ISA_SM4): New ISA flag.
	(TARGET_SM4): New feature flag for sm4.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_sm3ss1qv4si): Ditto.
	(aarch64_sm3tt1aq4si): Ditto.
	(aarch64_sm3tt1bq4si): Ditto.
	(aarch64_sm3tt2aq4si): Ditto.
	(aarch64_sm3tt2bq4si): Ditto.
	(aarch64_sm3partw1qv4si): Ditto.
	(aarch64_sm3partw2qv4si): Ditto.
	(aarch64_sm4eqv4si): Ditto.
	(aarch64_sm4ekeyqv4si): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_sm3ss1qv4si): Ditto.
	(aarch64_sm3tt<sm3tt_op>qv4si): Ditto.
	(aarch64_sm3partw<sm3part_op>qv4si): Ditto.
	(aarch64_sm4eqv4si): Ditto.
	(aarch64_sm4ekeyqv4si): Ditto.
	* config/aarch64/iterators.md (sm3tt_op): New int iterator.
	(sm3part_op): Ditto.
	(CRYPTO_SM3TT): Ditto.
	(CRYPTO_SM3PART): Ditto.
	(UNSPEC_SM3SS1): New unspec.
	(UNSPEC_SM3TT1A): Ditto.
	(UNSPEC_SM3TT1B): Ditto.
	(UNSPEC_SM3TT2A): Ditto.
	(UNSPEC_SM3TT2B): Ditto.
	(UNSPEC_SM3PARTW1): Ditto.
	(UNSPEC_SM3PARTW2): Ditto.
	(UNSPEC_SM4E): Ditto.
	(UNSPEC_SM4EKEY): Ditto.
	* config/aarch64/constraints.md (Ui2): New constraint.
	* config/aarch64/predicates.md (aarch64_imm2): New predicate.
	* config/arm/types.md (crypto_sm3): New type attribute.
	(crypto_sm4): Ditto.
	* config/aarch64/arm_neon.h (vsm3ss1q_u32): New intrinsic.
	(vsm3tt1aq_u32): Ditto.
	(vsm3tt1bq_u32): Ditto.
	(vsm3tt2aq_u32): Ditto.
	(vsm3tt2bq_u32): Ditto.
	(vsm3partw1q_u32): Ditto.
	(vsm3partw2q_u32): Ditto.
	(vsm4eq_u32): Ditto.
	(vsm4ekeyq_u32): Ditto.
	(doc/invoke.texi): Document new sm4 option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-arches.def (armv8.4-a): New architecture.
	* config/aarch64/aarch64.h (AARCH64_ISA_V8_4): New ISA flag.
	(AARCH64_FL_FOR_ARCH8_4): New.
	(AARCH64_FL_V8_4): New flag.
	(doc/invoke.texi): Document new armv8.4-a option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_AES): Define if TARGET_AES is true.
	(__ARM_FEATURE_SHA2): Define if TARGET_SHA2 is true.
	* config/aarch64/aarch64-option-extension.def: Add
	AARCH64_OPT_EXTENSION of 'sha2'.
	(aes): Add AARCH64_OPT_EXTENSION of 'aes'.
	(crypto): Disable sha2 and aes if crypto disabled.
	(crypto): Enable aes and sha2 if enabled.
	(simd): Disable sha2 and aes if simd disabled.
	* config/aarch64/aarch64.h (AARCH64_FL_AES, AARCH64_FL_SHA2):
	New flags.
	(AARCH64_ISA_AES, AARCH64_ISA_SHA2): New ISA flags.
	(TARGET_SHA2): New feature flag for sha2.
	(TARGET_AES): New feature flag for aes.
	* config/aarch64/aarch64-simd.md:
	(aarch64_crypto_aes<aes_op>v16qi): Make pattern
	conditional on TARGET_AES.
	(aarch64_crypto_aes<aesmc_op>v16qi): Ditto.
	(aarch64_crypto_sha1hsi): Make pattern conditional
	on TARGET_SHA2.
	(aarch64_crypto_sha1hv4si): Ditto.
	(aarch64_be_crypto_sha1hv4si): Ditto.
	(aarch64_crypto_sha1su1v4si): Ditto.
	(aarch64_crypto_sha1<sha1_op>v4si): Ditto.
	(aarch64_crypto_sha1su0v4si): Ditto.
	(aarch64_crypto_sha256h<sha256_op>v4si): Ditto.
	(aarch64_crypto_sha256su0v4si): Ditto.
	(aarch64_crypto_sha256su1v4si): Ditto.
	(doc/invoke.texi): Document new aes and sha2 options.

2018-01-10  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83781
	* gimple-fold.c (get_range_strlen): Avoid treating arrays of pointers
	as string arrays.

2018-01-11  Martin Sebor  <msebor@gmail.com>
	    Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/83501
	PR tree-optimization/81703

	* tree-ssa-strlen.c (get_string_cst): Rename...
	(get_string_len): ...to this.  Handle global constants.
	(handle_char_store): Adjust.

2018-01-10  Kito Cheng  <kito.cheng@gmail.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-protos.h (riscv_output_return): New.
	* config/riscv/riscv.c (struct machine_function): New naked_p field.
	(riscv_attribute_table, riscv_output_return),
	(riscv_handle_fndecl_attribute, riscv_naked_function_p),
	(riscv_allocate_stack_slots_for_args, riscv_warn_func_return): New.
	(riscv_compute_frame_info): Only compute frame->mask if not a naked
	function.
	(riscv_expand_prologue): Add early return for naked function.
	(riscv_expand_epilogue): Likewise.
	(riscv_function_ok_for_sibcall): Return false for naked function.
	(riscv_set_current_function): New.
	(TARGET_SET_CURRENT_FUNCTION, TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS),
	(TARGET_ATTRIBUTE_TABLE, TARGET_WARN_FUNC_RETURN): New.
	* config/riscv/riscv.md (simple_return): Call riscv_output_return.
	* doc/extend.texi (RISC-V Function Attributes): New.

2018-01-10  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (is_complex_IBM_long_double): Explicitly
	check for 128-bit long double before checking TCmode.
	* config/rs6000/rs6000.h (FLOAT128_IEEE_P): Explicitly check for
	128-bit long doubles before checking TFmode or TCmode.
	(FLOAT128_IBM_P): Likewise.

2018-01-10  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83671
	* builtins.c (c_strlen): Unconditionally return zero for the empty
	string.
	Use -Warray-bounds for warnings.
	* gimple-fold.c (get_range_strlen): Handle non-constant lengths
	for non-constant array indices with COMPONENT_REF, arrays of
	arrays, and pointers to arrays.
	(gimple_fold_builtin_strlen): Determine and set length range for
	non-constant character arrays.

2018-01-10  Aldy Hernandez  <aldyh@redhat.com>

	PR middle-end/81897
	* tree-ssa-uninit.c (convert_control_dep_chain_into_preds): Skip
	empty blocks.

2018-01-10  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (dwarf2out_var_location): Do not pass NULL to fprintf.

2018-01-10  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83399
	* config/rs6000/rs6000.c (print_operand) <'y'>: Use
	VECTOR_MEM_ALTIVEC_OR_VSX_P.
	* config/rs6000/vsx.md (*vsx_le_perm_load_<mode> for VSX_D): Use
	indexed_or_indirect_operand predicate.
	(*vsx_le_perm_load_<mode> for VSX_W): Likewise.
	(*vsx_le_perm_load_v8hi): Likewise.
	(*vsx_le_perm_load_v16qi): Likewise.
	(*vsx_le_perm_store_<mode> for VSX_D): Likewise.
	(*vsx_le_perm_store_<mode> for VSX_W): Likewise.
	(*vsx_le_perm_store_v8hi): Likewise.
	(*vsx_le_perm_store_v16qi): Likewise.
	(eight unnamed splitters): Likewise.

2018-01-10  Peter Bergner  <bergner@vnet.ibm.com>

	* config/rs6000/x86intrin.h: Change #warning to #error. Update message.
	* config/rs6000/emmintrin.h: Likewise.
	* config/rs6000/mmintrin.h: Likewise.
	* config/rs6000/xmmintrin.h: Likewise.

2018-01-10  David Malcolm  <dmalcolm@redhat.com>

	PR c++/43486
	* tree-core.h: Document EXPR_LOCATION_WRAPPER_P's usage of
	"public_flag".
	* tree.c (tree_nop_conversion): Return true for location wrapper
	nodes.
	(maybe_wrap_with_location): New function.
	(selftest::check_strip_nops): New function.
	(selftest::test_location_wrappers): New function.
	(selftest::tree_c_tests): Call it.
	* tree.h (STRIP_ANY_LOCATION_WRAPPER): New macro.
	(maybe_wrap_with_location): New decl.
	(EXPR_LOCATION_WRAPPER_P): New macro.
	(location_wrapper_p): New inline function.
	(tree_strip_any_location_wrapper): New inline function.

2018-01-10  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83735
	* config/i386/i386.c (ix86_compute_frame_layout): Always adjust
	stack_realign_offset for the largest alignment of stack slot
	actually used.
	(ix86_find_max_used_stack_alignment): New function.
	(ix86_finalize_stack_frame_flags): Use it.  Set
	max_used_stack_alignment if we don't realign stack.
	* config/i386/i386.h (machine_function): Add
	max_used_stack_alignment.

2018-01-10  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm.opt (-mbranch-cost): New option.
	* config/arm/arm.h (BRANCH_COST): Take arm_branch_cost into
	account.

2018-01-10  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/83629
	* config/rs6000/rs6000.md (load_toc_v4_PIC_2, load_toc_v4_PIC_3b,
	load_toc_v4_PIC_3c): Wrap const term in CONST RTL.

2018-01-10  Richard Biener  <rguenther@suse.de>

	PR debug/83765
	* dwarf2out.c (gen_subprogram_die): Hoist old_die && declaration
	early out so it also covers the case where we have a non-NULL
	origin.

2018-01-10  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83753
	* tree-vect-stmts.c (get_group_load_store_type): Use VMAT_CONTIGUOUS
	for non-strided grouped accesses if the number of elements is 1.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	* i386.c (ix86_vectorize_builtin_gather): Check TARGET_USE_GATHER.
	* i386.h (TARGET_USE_GATHER): Define.
	* x86-tune.def (X86_TUNE_USE_GATHER): New.

2018-01-10  Martin Liska  <mliska@suse.cz>

	PR bootstrap/82831
	* basic-block.h (CLEANUP_NO_PARTITIONING): New define.
	* bb-reorder.c (pass_reorder_blocks::execute): Do not clean up
	partitioning.
	* cfgcleanup.c (try_optimize_cfg): Fix up partitioning if
	CLEANUP_NO_PARTITIONING is not set.

2018-01-10  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi: Remove documentation of (const ...) wrappers
	for vectors, as a partial revert of r254296.
	* rtl.h (const_vec_p): Delete.
	(const_vec_duplicate_p): Don't test for vector CONSTs.
	(unwrap_const_vec_duplicate, const_vec_series_p): Likewise.
	* expmed.c (make_tree): Likewise.

	Revert:
	* common.md (E, F): Use CONSTANT_P instead of checking for
	CONST_VECTOR.
	* emit-rtl.c (gen_lowpart_common): Use const_vec_p instead of
	checking for CONST_VECTOR.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83575
	* predict.c (force_edge_cold): Handle in more sane way edges
	with no prediction.

2018-01-09  Carl Love  <cel@us.ibm.com>

	* config/rs6002/altivec.md (p8_vmrgow): Add support for V2DI, V2DF,
	V4SI, V4SF types.
	(p8_vmrgew): Add support for V2DI, V2DF, V4SF types.
	* config/rs6000/rs6000-builtin.def: Add definitions for FLOAT2_V2DF,
	VMRGEW_V2DI, VMRGEW_V2DF, VMRGEW_V4SF, VMRGOW_V4SI, VMRGOW_V4SF,
	VMRGOW_V2DI, VMRGOW_V2DF.  Remove definition for VMRGOW.
	* config/rs6000/rs6000-c.c (VSX_BUILTIN_VEC_FLOAT2,
	P8V_BUILTIN_VEC_VMRGEW, P8V_BUILTIN_VEC_VMRGOW):  Add definitions.
	* config/rs6000/rs6000-protos.h: Add extern defition for
	rs6000_generate_float2_double_code.
	* config/rs6000/rs6000.c (rs6000_generate_float2_double_code): Add
	function.
	* config/rs6000/vsx.md (vsx_xvcdpsp): Add define_insn.
	(float2_v2df): Add define_expand.

2018-01-09  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* combine.c (force_int_to_mode) <case ASHIFT>: Use mode instead of
	op_mode in the force_to_mode call.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_evpc_trn): Use d.perm.series_p
	instead of checking each element individually.
	(aarch64_evpc_uzp): Likewise.
	(aarch64_evpc_zip): Likewise.
	(aarch64_evpc_ext): Likewise.
	(aarch64_evpc_rev): Likewise.
	(aarch64_evpc_dup): Test the encoding for a single duplicated element,
	instead of checking each element individually.  Return true without
	generating rtl if
	(aarch64_vectorize_vec_perm_const): Use all_from_input_p to test
	whether all selected elements come from the same input, instead of
	checking each element individually.  Remove calls to gen_rtx_REG,
	start_sequence and end_sequence and instead assert that no rtl is
	generated.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_legitimate_constant_p): Fix
	order of HIGH and CONST checks.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (permute_vec_elements): Create a fresh variable
	if the destination isn't an SSA_NAME.

2018-01-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83668
	* graphite.c (canonicalize_loop_closed_ssa): Add edge argument,
	move prologue...
	(canonicalize_loop_form): ... here, renamed from ...
	(canonicalize_loop_closed_ssa_form): ... this and amended to
	swap successor edges for loop exit blocks to make us use
	the RPO order we need for initial schedule generation.

2018-01-09  Joseph Myers  <joseph@codesourcery.com>

	PR tree-optimization/64811
	* match.pd: When optimizing comparisons with Inf, avoid
	introducing or losing exceptions from comparisons with NaN.

2018-01-09  Martin Liska  <mliska@suse.cz>

	PR sanitizer/82517
	* asan.c (shadow_mem_size): Add gcc_assert.

2018-01-09  Georg-Johann Lay  <avr@gjlay.de>

	Don't save registers in main().

	PR target/83738
	* doc/invoke.texi (AVR Options) [-mmain-is-OS_task]: Document it.
	* config/avr/avr.opt (-mmain-is-OS_task): New target option.
	* config/avr/avr.c (avr_set_current_function): Don't error if
	naked, OS_task or OS_main are specified at the same time.
	(avr_function_ok_for_sibcall): Don't disable sibcalls for OS_task,
	OS_main.
	(avr_insert_attributes) [-mmain-is-OS_task] <main>: Add OS_task
	attribute.
	* common/config/avr/avr-common.c (avr_option_optimization_table):
	Switch on -mmain-is-OS_task for optimizing compilations.

2018-01-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83572
	* graphite.c: Include cfganal.h.
	(graphite_transform_loops): Connect infinite loops to exit
	and remove fake edges at the end.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (edge_badness): Revert accidental checkin.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/80763
	* ipa-comdats.c (set_comdat_group): Only set comdat group of real
	symbols; not inline clones.

2018-01-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/83507
	* modulo-sched.c (schedule_reg_moves): Punt if we'd need to move
	hard registers.  Formatting fixes.

	PR preprocessor/83722
	* gcc.c (try_generate_repro): Pass
	&temp_stderr_files[RETRY_ICE_ATTEMPTS - 1] rather than
	&temp_stdout_files[RETRY_ICE_ATTEMPTS - 1] as last argument to
	do_report_bug.

2018-01-08  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/riscv/riscv.c (machine_function::is_leaf): Remove field.
	(riscv_leaf_function_p): Delete.
	(riscv_function_ok_for_sibcall): Return false when TARGET_SAVE_RESTORE.

2018-01-08  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000-string.c (do_load_for_compare_from_addr): New
	function.
	(do_ifelse): New function.
	(do_isel): New function.
	(do_sub3): New function.
	(do_add3): New function.
	(do_load_mask_compare): New function.
	(do_overlap_load_compare): New function.
	(expand_compare_loop): New function.
	(expand_block_compare): Call expand_compare_loop() when appropriate.
	* config/rs6000/rs6000.opt (-mblock-compare-inline-limit): Change
	option description.
	(-mblock-compare-inline-loop-limit): New option.

2018-01-08  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	PR target/83677
	* config/rs6000/altivec.md (*altivec_vpermr_<mode>_internal):
	Reverse order of second and third operands in first alternative.
	* config/rs6000/rs6000.c (rs6000_expand_vector_set): Reverse order
	of first and second elements in UNSPEC_VPERMR vector.
	(altivec_expand_vec_perm_le): Likewise.

2018-01-08  Jeff Law  <law@redhat.com>

	PR rtl-optimizatin/81308
	* tree-switch-conversion.c (cfg_altered): New file scoped static.
	(process_switch): If group_case_labels makes a change, then set
	cfg_altered.
	(pass_convert_switch::execute): If a switch is converted, then
	set cfg_altered.  Return TODO_cfg_cleanup if cfg_altered is true.

	PR rtl-optimization/81308
	* recog.c (split_all_insns): Conditionally cleanup the CFG after
	splitting insns.

2018-01-08  Vidya Praveen  <vidyapraveen@arm.com>

	PR target/83663 - Revert r255946
	* config/aarch64/aarch64.c (aarch64_expand_vector_init): Modify code
	generation for cases where splatting a value is not useful.
	* simplify-rtx.c (simplify_ternary_operation): Simplify vec_merge
	across a vec_duplicate and a paradoxical subreg forming a vector
	mode to a vec_concat.

2018-01-08  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/t-aprofile (MULTILIB_MATCHES): Add mapping rules for
	-march=armv8.3-a variants.
	* config/arm/t-multilib: Likewise.
	* config/arm/t-arm-elf: Likewise.  Handle dotprod extension.

2018-01-08  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (cceq_ior_compare): Remove * so I can use it
	to generate rtl.
	(cceq_ior_compare_complement): Give it a name so I can use it, and
	change boolean_or_operator predicate to boolean_operator so it can
	be used to generate a crand.
	(eqne): New code iterator.
	(bd/bd_neg): New code_attrs.
	(<bd>_<mode>): New name for ctr<mode>_internal[12] now combined into
	a single define_insn.
	(<bd>tf_<mode>): A new insn pattern for the conditional form branch
	decrement (bdnzt/bdnzf/bdzt/bdzf).
	* config/rs6000/rs6000.c (rs6000_legitimate_combined_insn): Updated
	with the new names of the branch decrement patterns, and added the
	names of the branch decrement conditional patterns.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83563
	* graphite.c (canonicalize_loop_closed_ssa_form): Reset the SCEV
	cache.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83713
	* convert.c (do_narrow): Properly guard TYPE_OVERFLOW_WRAPS checks.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83685
	* tree-ssa-pre.c (create_expression_by_pieces): Do not insert
	references to abnormals.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR lto/83719
	* dwarf2out.c (output_indirect_strings): Handle empty
	skeleton_debug_str_hash.
	(dwarf2out_early_finish): Index strings for -gsplit-dwarf.

2018-01-08  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (TARGET_TRAMPOLINE_ADJUST_ADDRESS): Delete.
	(emit_store_direct): Likewise.
	(arc_trampoline_adjust_address): Likewise.
	(arc_asm_trampoline_template): New function.
	(arc_initialize_trampoline): Use asm_trampoline_template.
	(TARGET_ASM_TRAMPOLINE_TEMPLATE): Define.
	* config/arc/arc.h (TRAMPOLINE_SIZE): Adjust to 16.
	* config/arc/arc.md (flush_icache): Delete pattern.

2018-01-08  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-c.def (__ARC_UNALIGNED__): New define.
	* config/arc/arc.h (STRICT_ALIGNMENT): Control this macro using
	munaligned-access.

2018-01-08  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	PR target/83681
	* config/epiphany/epiphany.h (make_pass_mode_switch_use): Guard
	by not USED_FOR_TARGET.
	(make_pass_resolve_sw_modes): Likewise.

2018-01-08  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config/nios2/nios2.h (nios2_section_threshold): Guard by not
	USED_FOR_TARGET.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83580
	* tree-data-ref.c (split_constant_offset): Remove STRIP_NOPS.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83517
	* match.pd ((t * 2) / 2) -> t): Add missing :c.

2018-01-06  Aldy Hernandez  <aldyh@redhat.com>

	PR middle-end/81897
	* tree-ssa-uninit.c (compute_control_dep_chain): Do not bail on
	basic blocks with a small number of successors.
	(convert_control_dep_chain_into_preds): Improve handling of
	forwarder blocks.
	(dump_predicates): Split apart into...
	(dump_pred_chain): ...here...
	(dump_pred_info): ...and here.
	(can_one_predicate_be_invalidated_p): Add debugging printfs.
	(can_chain_union_be_invalidated_p): Improve check for invalidation
	of paths.
	(uninit_uses_cannot_happen): Avoid unnecessary if
	convert_control_dep_chain_into_preds yielded nothing.

2018-01-06  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83640
	* gimple-ssa-warn-restrict.c (builtin_access::builtin_access): Avoid
	subtracting negative offset from size.
	(builtin_access::overlap): Adjust offset bounds of the access to fall
	within the size of the object if possible.

2018-01-06  Richard Sandiford  <richard.sandiford@linaro.org>

	PR rtl-optimization/83699
	* expmed.c (extract_bit_field_1): Restrict the vector usage of
	extract_bit_field_as_subreg to cases in which the extracted
	value is also a vector.

	* lra-constraints.c (process_alt_operands): Test for the equivalence
	substitutions when detecting a possible reload cycle.

2018-01-06  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83480
	* toplev.c (process_options): Don't enable debug_nonbind_markers_p
	by default if flag_selective_schedling{,2}.  Formatting fixes.

	PR rtl-optimization/83682
	* rtl.h (const_vec_duplicate_p): Only return true for VEC_DUPLICATE
	if it has non-VECTOR_MODE element mode.
	(vec_duplicate_p): Likewise.

	PR middle-end/83694
	* cfgexpand.c (expand_debug_expr): Punt if mode1 is VOIDmode
	and bitsize might be greater than MAX_BITSIZE_MODE_ANY_INT.

2018-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/83604
	* config/i386/i386-builtin.def
	(__builtin_ia32_vgf2p8affineinvqb_v64qi,
	__builtin_ia32_vgf2p8affineqb_v64qi, __builtin_ia32_vgf2p8mulb_v64qi):
	Require also OPTION_MASK_ISA_AVX512F in addition to
	OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8affineinvqb_v16qi_mask,
	__builtin_ia32_vgf2p8affineqb_v16qi_mask): Require
	OPTION_MASK_ISA_AVX512VL instead of OPTION_MASK_ISA_SSE in addition
	to OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8mulb_v32qi_mask): Require
	OPTION_MASK_ISA_AVX512VL in addition to OPTION_MASK_ISA_GFNI and
	OPTION_MASK_ISA_AVX512BW.
	(__builtin_ia32_vgf2p8mulb_v16qi_mask): Require
	OPTION_MASK_ISA_AVX512VL instead of OPTION_MASK_ISA_AVX512BW in
	addition to OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8affineinvqb_v16qi,
	__builtin_ia32_vgf2p8affineqb_v16qi, __builtin_ia32_vgf2p8mulb_v16qi):
	Require OPTION_MASK_ISA_SSE2 instead of OPTION_MASK_ISA_SSE in addition
	to OPTION_MASK_ISA_GFNI.
	* config/i386/i386.c (def_builtin): Change to builtin isa/isa2 being
	a requirement for all ISAs rather than any of them with a few
	exceptions.
	(ix86_add_new_builtins): Clear OPTION_MASK_ISA_64BIT from isa before
	processing.
	(ix86_expand_builtin): Require all ISAs from builtin's isa and isa2
	bitmasks to be enabled with 3 exceptions, instead of requiring any
	enabled ISA with lots of exceptions.
	* config/i386/sse.md (vgf2p8affineinvqb_<mode><mask_name>,
	vgf2p8affineqb_<mode><mask_name>, vgf2p8mulb_<mode><mask_name>):
	Change avx512bw in isa attribute to avx512f.
	* config/i386/sgxintrin.h: Add license boilerplate.
	* config/i386/vaesintrin.h: Likewise.  Fix macro spelling __AVX512F
	to __AVX512F__ and __AVX512VL to __AVX512VL__.
	(_mm256_aesdec_epi128, _mm256_aesdeclast_epi128, _mm256_aesenc_epi128,
	_mm256_aesenclast_epi128): Enable temporarily avx if __AVX__ is not
	defined.
	* config/i386/gfniintrin.h (_mm_gf2p8mul_epi8,
	_mm_gf2p8affineinv_epi64_epi8, _mm_gf2p8affine_epi64_epi8): Enable
	temporarily sse2 rather than sse if not enabled already.

	PR target/83604
	* config/i386/sse.md (VI248_VLBW): Rename to ...
	(VI248_AVX512VL): ... this.  Don't guard V32HI with TARGET_AVX512BW.
	(vpshrd_<mode><mask_name>, vpshld_<mode><mask_name>,
	vpshrdv_<mode>, vpshrdv_<mode>_mask, vpshrdv_<mode>_maskz,
	vpshrdv_<mode>_maskz_1, vpshldv_<mode>, vpshldv_<mode>_mask,
	vpshldv_<mode>_maskz, vpshldv_<mode>_maskz_1): Use VI248_AVX512VL
	mode iterator instead of VI248_VLBW.

2018-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (record_modified_bb_info): Add OP.
	(record_modified): Skip clobbers; add debug output.
	(param_change_prob): Use sreal frequencies.

2018-01-05  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-data-refs.c (vect_compute_data_ref_alignment): Don't
	punt for user-aligned variables.

2018-01-05  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-chrec.c (chrec_contains_symbols): Return true for
	POLY_INT_CST.

2018-01-05  Sudakshina Das  <sudi.das@arm.com>

	PR target/82439
	* simplify-rtx.c (simplify_relational_operation_1): Add simplifications
	of (x|y) == x for BICS pattern.

2018-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83605
	* gimple-ssa-strength-reduction.c: Include tree-eh.h.
	(find_candidates_dom_walker::before_dom_children): Ignore stmts that
	can throw.

2018-01-05  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config.gcc (epiphany-*-elf*): Add (epiphany-*-rtems*) configuration.
	* config/epiphany/rtems.h: New file.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>
	    Uros Bizjak  <ubizjak@gmail.com>

	PR target/83554
	* config/i386/i386.md (*<rotate_insn>hi3_1 splitter): Use
	QIreg_operand instead of register_operand predicate.
	* config/i386/i386.c (ix86_rop_should_change_byte_p,
	set_rop_modrm_reg_bits, ix86_mitigate_rop): Use -mmitigate-rop in
	comments instead of -fmitigate[-_]rop.

2018-01-04  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR bootstrap/81926
	* cgraphunit.c (symbol_table::compile): Switch to text_section
	before calling assembly_start debug hook.
	* run-rtl-passes.c (run_rtl_passes): Likewise.
	Include output.h.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vrp.c (extract_range_from_binary_expr_1): Check
	range_int_cst_p rather than !symbolic_range_p before calling
	extract_range_from_multiplicative_op_1.

2018-01-04  Jeff Law  <law@redhat.com>

	* tree-ssa-math-opts.c (execute_cse_reciprocals_1): Remove
	redundant test in assertion.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi: Document machine_mode wrapper classes.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* fold-const.c (fold_ternary_loc): Check tree_fits_uhwi_p before
	using tree_to_uhwi.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-ssa-forwprop.c (is_combined_permutation_identity): Allow
	the VEC_PERM_EXPR fold to fail.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83585
	* bb-reorder.c (insert_section_boundary_note): Set has_bb_partition
	to switched_sections.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83680
	* config/arm/arm.c (arm_vectorize_vec_perm_const): Fix inverted
	test for d.testing.

2018-01-04  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83387
	* config/rs6000/rs6000.c (rs6000_discover_homogeneous_aggregate): Do not
	allow arguments in FP registers if TARGET_HARD_FLOAT is false.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83666
	* cfgexpand.c (expand_debug_expr) <case BIT_FIELD_REF>: Punt if mode
	is BLKmode and bitpos not zero or mode change is needed.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83675
	* config/sparc/sparc.c (sparc_vectorize_vec_perm_const): Require
	TARGET_VIS2.

2018-01-04  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* config/alpha/alpha.md (*sadd<modesuffix>): Use ASHIFT
	instead of MULT rtx.  Update all corresponding splitters.
	(*saddl_se): Ditto.
	(*ssub<modesuffix>): Ditto.
	(*ssubl_se): Ditto.
	(*cmp_sadd_di): Update split patterns.
	(*cmp_sadd_si): Ditto.
	(*cmp_sadd_sidi): Ditto.
	(*cmp_ssub_di): Ditto.
	(*cmp_ssub_si): Ditto.
	(*cmp_ssub_sidi): Ditto.
	* config/alpha/predicates.md (const23_operand): New predicate.
	* config/alpha/alpha.c (alpha_rtx_costs) [PLUS, MINUS]:
	Look for ASHIFT, not MULT inner operand.
	(alpha_split_conditional_move): Update for *sadd<modesuffix> change.

2018-01-04  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/83669
	* gcov.c (output_intermediate_file): Add version to intermediate
	gcov file.
	* doc/gcov.texi: Document new field 'version' in intermediate
	file format. Fix location of '-k' option of gcov command.

2018-01-04  Martin Liska  <mliska@suse.cz>

	PR ipa/82352
	* ipa-icf.c (sem_function::merge): Do not cross comdat boundary.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	* gimple-ssa-sprintf.c (parse_directive): Cast second dir.len to uhwi.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83655
	* gimple-ssa-warn-restrict.c (wrestrict_dom_walker::check_call): Avoid
	checking calls with invalid arguments.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_get_store_rhs): New function.
	(vectorizable_mask_load_store): Delete.
	(vectorizable_call): Return false for masked loads and stores.
	(vectorizable_store): Handle IFN_MASK_STORE.  Use vect_get_store_rhs
	instead of gimple_assign_rhs1.
	(vectorizable_load): Handle IFN_MASK_LOAD.
	(vect_transform_stmt): Don't set is_store for call_vec_info_type.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_build_gather_load_calls): New function,
	split out from..,
	(vectorizable_mask_load_store): ...here.
	(vectorizable_load): ...and here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_build_all_ones_mask)
	(vect_build_zero_merge_argument): New functions, split out from...
	(vectorizable_load): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_check_store_rhs): New function,
	split out from...
	(vectorizable_mask_load_store): ...here.
	(vectorizable_store): ...and here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_check_load_store_mask): New function,
	split out from...
	(vectorizable_mask_load_store): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vectorizer.h (vec_load_store_type): Moved from tree-vec-stmts.c
	(vect_model_store_cost): Take a vec_load_store_type instead of a
	vect_def_type.
	* tree-vect-stmts.c (vec_load_store_type): Move to tree-vectorizer.h.
	(vect_model_store_cost): Take a vec_load_store_type instead of a
	vect_def_type.
	(vectorizable_mask_load_store): Update accordingly.
	(vectorizable_store): Likewise.
	* tree-vect-slp.c (vect_analyze_slp_cost_1): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-loop.c (vect_transform_loop): Stub out scalar
	IFN_MASK_LOAD calls here rather than...
	* tree-vect-stmts.c (vectorizable_mask_load_store): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expmed.c (extract_bit_field_1): For vector extracts,
	fall back to extract_bit_field_as_subreg if vec_extract
	isn't available.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* lra-spills.c (pseudo_reg_slot_compare): Sort slots by whether
	they are variable or constant sized.
	(assign_stack_slot_num_and_sort_pseudos): Don't reuse variable-sized
	slots for constant-sized data.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): When
	handling COND_EXPRs with boolean comparisons, try to find a better
	basis for the mask type than the boolean itself.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi (MAX_BITSIZE_MODE_ANY_MODE): Describe how the default
	is calculated and how it can be overridden.
	* genmodes.c (max_bitsize_mode_any_mode): New variable.
	(create_modes): Initialize it from MAX_BITSIZE_MODE_ANY_MODE,
	if defined.
	(emit_max_int): Use it to set the output MAX_BITSIZE_MODE_ANY_MODE,
	if nonzero.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_output_simd_mov_immediate):
	Remove the mode argument.
	(aarch64_simd_valid_immediate): Remove the mode and inverse
	arguments.
	* config/aarch64/iterators.md (bitsize): New iterator.
	* config/aarch64/aarch64-simd.md (*aarch64_simd_mov<mode>, and<mode>3)
	(ior<mode>3): Update calls to aarch64_output_simd_mov_immediate.
	* config/aarch64/constraints.md (Do, Db, Dn): Update calls to
	aarch64_simd_valid_immediate.
	* config/aarch64/predicates.md (aarch64_reg_or_orr_imm): Likewise.
	(aarch64_reg_or_bic_imm): Likewise.
	* config/aarch64/aarch64.c (simd_immediate_info): Replace mvn
	with an insn_type enum and msl with a modifier_type enum.
	Replace element_width with a scalar_mode.  Change the shift
	to unsigned int.  Add constructors for scalar_float_mode and
	scalar_int_mode elements.
	(aarch64_vect_float_const_representable_p): Delete.
	(aarch64_can_const_movi_rtx_p)
	(aarch64_simd_scalar_immediate_valid_for_move)
	(aarch64_simd_make_constant): Update call to
	aarch64_simd_valid_immediate.
	(aarch64_advsimd_valid_immediate_hs): New function.
	(aarch64_advsimd_valid_immediate): Likewise.
	(aarch64_simd_valid_immediate): Remove mode and inverse
	arguments.  Rewrite to use the above.  Use const_vec_duplicate_p
	to detect duplicated constants and use aarch64_float_const_zero_rtx_p
	and aarch64_float_const_representable_p on the result.
	(aarch64_output_simd_mov_immediate): Remove mode argument.
	Update call to aarch64_simd_valid_immediate and use of
	simd_immediate_info.
	(aarch64_output_scalar_simd_mov_immediate): Update call
	accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_precision): Prefix with CONST_MODE_PRECISION.
	(mode_nunits): Likewise CONST_MODE_NUNITS.
	* machmode.def (ADJUST_NUNITS): Document.
	* genmodes.c (mode_data::need_nunits_adj): New field.
	(blank_mode): Update accordingly.
	(adj_nunits): New variable.
	(print_maybe_const_decl): Replace CATEGORY with a NEEDS_ADJ
	parameter.
	(emit_mode_size_inline): Set need_bytesize_adj for all modes
	listed in adj_nunits.
	(emit_mode_nunits_inline): Set need_nunits_adj for all modes
	listed in adj_nunits.  Don't emit case statements for such modes.
	(emit_insn_modes_h): Emit definitions of CONST_MODE_NUNITS
	and CONST_MODE_PRECISION.  Make CONST_MODE_SIZE expand to
	nothing if adj_nunits is nonnull.
	(emit_mode_precision, emit_mode_nunits): Use print_maybe_const_decl.
	(emit_mode_unit_size, emit_mode_base_align, emit_mode_ibit)
	(emit_mode_fbit): Update use of print_maybe_const_decl.
	(emit_move_size): Likewise.  Treat the array as non-const
	if adj_nunits.
	(emit_mode_adjustments): Handle adj_nunits.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* machmode.def (VECTOR_MODES_WITH_PREFIX): Document.
	* genmodes.c (VECTOR_MODES_WITH_PREFIX): New macro.
	(VECTOR_MODES): Use it.
	(make_vector_modes): Take the prefix as an argument.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* mode-classes.def (MODE_VECTOR_BOOL): New mode class.
	* machmode.h (INTEGRAL_MODE_P, VECTOR_MODE_P): Return true
	for MODE_VECTOR_BOOL.
	* machmode.def (VECTOR_BOOL_MODE): Document.
	* genmodes.c (VECTOR_BOOL_MODE): New macro.
	(make_vector_bool_mode): New function.
	(complete_mode, emit_mode_wider, emit_mode_adjustments): Handle
	MODE_VECTOR_BOOL.
	* lto-streamer-in.c (lto_input_mode_table): Likewise.
	* rtx-vector-builder.c (rtx_vector_builder::find_cached_value):
	Likewise.
	* stor-layout.c (int_mode_for_mode): Likewise.
	* tree.c (build_vector_type_for_mode): Likewise.
	* varasm.c (output_constant_pool_2): Likewise.
	* emit-rtl.c (init_emit_once): Make sure that CONST1_RTX (BImode) and
	CONSTM1_RTX (BImode) are the same thing.  Initialize const_tiny_rtx
	for MODE_VECTOR_BOOL.
	* expr.c (expand_expr_real_1): Use VECTOR_MODE_P instead of a list
	of mode class checks.
	* tree-vect-generic.c (expand_vector_operation): Use VECTOR_MODE_P
	instead of a list of mode class checks.
	(expand_vector_scalar_condition): Likewise.
	(type_for_widest_vector_mode): Handle BImode as an inner mode.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_size): Change from unsigned short to
	poly_uint16_pod.
	(mode_to_bytes): Return a poly_uint16 rather than an unsigned short.
	(GET_MODE_SIZE): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	(fixed_size_mode::includes_p): Check for constant-sized modes.
	* genmodes.c (emit_mode_size_inline): Make mode_size_inline
	return a poly_uint16 rather than an unsigned short.
	(emit_mode_size): Change the type of mode_size from unsigned short
	to poly_uint16_pod.  Use ZERO_COEFFS for the initializer.
	(emit_mode_adjustments): Cope with polynomial vector sizes.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_SIZE.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_SIZE.
	* auto-inc-dec.c (try_merge): Treat GET_MODE_SIZE as polynomial.
	* builtins.c (expand_ifn_atomic_compare_exchange_into_call): Likewise.
	* caller-save.c (setup_save_areas): Likewise.
	(replace_reg_with_saved_mem): Likewise.
	* calls.c (emit_library_call_value_1): Likewise.
	* combine-stack-adj.c (combine_stack_adjustments_for_block): Likewise.
	* combine.c (simplify_set, make_extraction, simplify_shift_const_1)
	(gen_lowpart_for_combine): Likewise.
	* convert.c (convert_to_integer_1): Likewise.
	* cse.c (equiv_constant, cse_insn): Likewise.
	* cselib.c (autoinc_split, cselib_hash_rtx): Likewise.
	(cselib_subst_to_values): Likewise.
	* dce.c (word_dce_process_block): Likewise.
	* df-problems.c (df_word_lr_mark_ref): Likewise.
	* dwarf2cfi.c (init_one_dwarf_reg_size): Likewise.
	* dwarf2out.c (multiple_reg_loc_descriptor, mem_loc_descriptor)
	(concat_loc_descriptor, concatn_loc_descriptor, loc_descriptor)
	(rtl_for_decl_location): Likewise.
	* emit-rtl.c (gen_highpart, widen_memory_access): Likewise.
	* expmed.c (extract_bit_field_1, extract_integral_bit_field): Likewise.
	* expr.c (emit_group_load_1, clear_storage_hints): Likewise.
	(emit_move_complex, emit_move_multi_word, emit_push_insn): Likewise.
	(expand_expr_real_1): Likewise.
	* function.c (assign_parm_setup_block_p, assign_parm_setup_block)
	(pad_below): Likewise.
	* gimple-fold.c (optimize_atomic_compare_exchange_p): Likewise.
	* gimple-ssa-store-merging.c (rhs_valid_for_store_merging_p): Likewise.
	* ira.c (get_subreg_tracking_sizes): Likewise.
	* ira-build.c (ira_create_allocno_objects): Likewise.
	* ira-color.c (coalesced_pseudo_reg_slot_compare): Likewise.
	(ira_sort_regnos_for_alter_reg): Likewise.
	* ira-costs.c (record_operand_costs): Likewise.
	* lower-subreg.c (interesting_mode_p, simplify_gen_subreg_concatn)
	(resolve_simple_move): Likewise.
	* lra-constraints.c (get_reload_reg, operands_match_p): Likewise.
	(process_addr_reg, simplify_operand_subreg, curr_insn_transform)
	(lra_constraints): Likewise.
	(CONST_POOL_OK_P): Reject variable-sized modes.
	* lra-spills.c (slot, assign_mem_slot, pseudo_reg_slot_compare)
	(add_pseudo_to_slot, lra_spill): Likewise.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* optabs-query.c (get_best_extraction_insn): Likewise.
	* optabs-tree.c (expand_vec_cond_expr_p): Likewise.
	* optabs.c (expand_vec_perm_var, expand_vec_cond_expr): Likewise.
	(expand_mult_highpart, valid_multiword_target_p): Likewise.
	* recog.c (offsettable_address_addr_space_p): Likewise.
	* regcprop.c (maybe_mode_change): Likewise.
	* reginfo.c (choose_hard_reg_mode, record_subregs_of_mode): Likewise.
	* regrename.c (build_def_use): Likewise.
	* regstat.c (dump_reg_info): Likewise.
	* reload.c (complex_word_subreg_p, push_reload, find_dummy_reload)
	(find_reloads, find_reloads_subreg_address): Likewise.
	* reload1.c (eliminate_regs_1): Likewise.
	* rtlanal.c (for_each_inc_dec_find_inc_dec, rtx_cost): Likewise.
	* simplify-rtx.c (avoid_constant_pool_reference): Likewise.
	(simplify_binary_operation_1, simplify_subreg): Likewise.
	* targhooks.c (default_function_arg_padding): Likewise.
	(default_hard_regno_nregs, default_class_max_nregs): Likewise.
	* tree-cfg.c (verify_gimple_assign_binary): Likewise.
	(verify_gimple_assign_ternary): Likewise.
	* tree-inline.c (estimate_move_cost): Likewise.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-ssa-loop-ivopts.c (add_autoinc_candidates): Likewise.
	(get_address_cost_ainc): Likewise.
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Likewise.
	(vect_supportable_dr_alignment): Likewise.
	* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
	(vectorizable_reduction): Likewise.
	* tree-vect-stmts.c (vectorizable_assignment, vectorizable_shift)
	(vectorizable_operation, vectorizable_load): Likewise.
	* tree.c (build_same_sized_truth_vector_type): Likewise.
	* valtrack.c (cleanup_auto_inc_dec): Likewise.
	* var-tracking.c (emit_note_insn_var_location): Likewise.
	* config/arc/arc.h (ASM_OUTPUT_CASE_END): Use as_a <scalar_int_mode>.
	(ADDR_VEC_ALIGN): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_to_bits): Return a poly_uint16 rather than an
	unsigned short.
	(GET_MODE_BITSIZE): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is polynomial.
	* calls.c (shift_return_value): Treat GET_MODE_BITSIZE as polynomial.
	* combine.c (make_extraction): Likewise.
	* dse.c (find_shift_sequence): Likewise.
	* dwarf2out.c (mem_loc_descriptor): Likewise.
	* expmed.c (store_integral_bit_field, extract_bit_field_1): Likewise.
	(extract_bit_field, extract_low_bits): Likewise.
	* expr.c (convert_move, convert_modes, emit_move_insn_1): Likewise.
	(optimize_bitfield_assignment_op, expand_assignment): Likewise.
	(store_expr_with_bounds, store_field, expand_expr_real_1): Likewise.
	* fold-const.c (optimize_bit_field_compare, merge_ranges): Likewise.
	* gimple-fold.c (optimize_atomic_compare_exchange_p): Likewise.
	* reload.c (find_reloads): Likewise.
	* reload1.c (alter_reg): Likewise.
	* stor-layout.c (bitwise_mode_for_mode, compute_record_mode): Likewise.
	* targhooks.c (default_secondary_memory_needed_mode): Likewise.
	* tree-if-conv.c (predicate_mem_writes): Likewise.
	* tree-ssa-strlen.c (handle_builtin_memcmp): Likewise.
	* tree-vect-patterns.c (adjust_bool_pattern): Likewise.
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Likewise.
	* valtrack.c (dead_debug_insert_temp): Likewise.
	* varasm.c (mergeable_constant_section): Likewise.
	* config/sh/sh.h (LOCAL_ALIGNMENT): Use as_a <fixed_size_mode>.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_assignment): Cope with polynomial mode sizes
	when assigning to a CONCAT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_precision): Change from unsigned short to
	poly_uint16_pod.
	(mode_to_precision): Return a poly_uint16 rather than an unsigned
	short.
	(GET_MODE_PRECISION): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	(HWI_COMPUTABLE_MODE_P): Turn into a function.  Optimize the case
	in which the mode is already known to be a scalar_int_mode.
	* genmodes.c (emit_mode_precision): Change the type of mode_precision
	from unsigned short to poly_uint16_pod.  Use ZERO_COEFFS for the
	initializer.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_PRECISION.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_PRECISION.
	* combine.c (update_rsp_from_reg_equal): Treat GET_MODE_PRECISION
	as polynomial.
	(try_combine, find_split_point, combine_simplify_rtx): Likewise.
	(expand_field_assignment, make_extraction): Likewise.
	(make_compound_operation_int, record_dead_and_set_regs_1): Likewise.
	(get_last_value): Likewise.
	* convert.c (convert_to_integer_1): Likewise.
	* cse.c (cse_insn): Likewise.
	* expr.c (expand_expr_real_1): Likewise.
	* lra-constraints.c (simplify_operand_subreg): Likewise.
	* optabs-query.c (can_atomic_load_p): Likewise.
	* optabs.c (expand_atomic_load): Likewise.
	(expand_atomic_store): Likewise.
	* ree.c (combine_reaching_defs): Likewise.
	* rtl.h (partial_subreg_p, paradoxical_subreg_p): Likewise.
	* rtlanal.c (nonzero_bits1, lsb_bitfield_op_p): Likewise.
	* tree.h (type_has_mode_precision_p): Likewise.
	* ubsan.c (instrument_si_overflow): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree.h (TYPE_VECTOR_SUBPARTS): Turn into a function and handle
	polynomial numbers of units.
	(SET_TYPE_VECTOR_SUBPARTS): Likewise.
	(valid_vector_subparts_p): New function.
	(build_vector_type): Remove temporary shim and take the number
	of units as a poly_uint64 rather than an int.
	(build_opaque_vector_type): Take the number of units as a
	poly_uint64 rather than an int.
	* tree.c (build_vector_from_ctor): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(type_hash_canon_hash, type_cache_hasher::equal): Likewise.
	(uniform_vector_p, vector_type_mode, build_vector): Likewise.
	(build_vector_from_val): If the number of units is variable,
	use build_vec_duplicate_cst for constant operands and
	VEC_DUPLICATE_EXPR otherwise.
	(make_vector_type): Remove temporary is_constant ().
	(build_vector_type, build_opaque_vector_type): Take the number of
	units as a poly_uint64 rather than an int.
	(check_vector_cst): Handle polynomial TYPE_VECTOR_SUBPARTS and
	VECTOR_CST_NELTS.
	* cfgexpand.c (expand_debug_expr): Likewise.
	* expr.c (count_type_elements, categorize_ctor_elements_1): Likewise.
	(store_constructor, expand_expr_real_1): Likewise.
	(const_scalar_mask_from_tree): Likewise.
	* fold-const-call.c (fold_const_reduction): Likewise.
	* fold-const.c (const_binop, const_unop, fold_convert_const): Likewise.
	(operand_equal_p, fold_vec_perm, fold_ternary_loc): Likewise.
	(native_encode_vector, vec_cst_ctor_to_array): Likewise.
	(fold_relational_const): Likewise.
	(native_interpret_vector): Likewise.  Change the size from an
	int to an unsigned int.
	* gimple-fold.c (gimple_fold_stmt_to_constant_1): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(gimple_fold_indirect_ref, gimple_build_vector): Likewise.
	(gimple_build_vector_from_val): Use VEC_DUPLICATE_EXPR when
	duplicating a non-constant operand into a variable-length vector.
	* hsa-brig.c (hsa_op_immed::emit_to_buffer): Handle polynomial
	TYPE_VECTOR_SUBPARTS and VECTOR_CST_NELTS.
	* ipa-icf.c (sem_variable::equals): Likewise.
	* match.pd: Likewise.
	* omp-simd-clone.c (simd_clone_subparts): Likewise.
	* print-tree.c (print_node): Likewise.
	* stor-layout.c (layout_type): Likewise.
	* targhooks.c (default_builtin_vectorization_cost): Likewise.
	* tree-cfg.c (verify_gimple_comparison): Likewise.
	(verify_gimple_assign_binary): Likewise.
	(verify_gimple_assign_ternary): Likewise.
	(verify_gimple_assign_single): Likewise.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	(simplify_bitfield_ref, is_combined_permutation_identity): Likewise.
	* tree-vect-data-refs.c (vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported, vect_permute_load_chain): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-generic.c (nunits_for_known_piecewise_op): Likewise.
	(expand_vector_condition, optimize_vector_constructor): Likewise.
	(lower_vec_perm, get_compute_type): Likewise.
	* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
	(get_initial_defs_for_reduction, vect_transform_loop): Likewise.
	* tree-vect-patterns.c (vect_recog_bool_pattern): Likewise.
	(vect_recog_mask_conversion_pattern): Likewise.
	* tree-vect-slp.c (vect_supported_load_permutation_p): Likewise.
	(vect_get_constant_vectors, vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(get_group_load_store_type, vectorizable_mask_load_store): Likewise.
	(vectorizable_bswap, simd_clone_subparts, vectorizable_assignment)
	(vectorizable_shift, vectorizable_operation, vectorizable_store)
	(vectorizable_load, vect_is_simple_cond, vectorizable_comparison)
	(supportable_widening_operation): Likewise.
	(supportable_narrowing_operation): Likewise.
	* tree-vector-builder.c (tree_vector_builder::binary_encoded_nelts):
	Likewise.
	* varasm.c (output_constant): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_permute_store_chain): Reorganize
	so that both the length == 3 and length != 3 cases set up their
	own permute vectors.  Add comments explaining why we know the
	number of elements is constant.
	(vect_permute_load_chain): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_nunits): Change from unsigned char to
	poly_uint16_pod.
	(ONLY_FIXED_SIZE_MODES): New macro.
	(pod_mode::measurement_type, scalar_int_mode::measurement_type)
	(scalar_float_mode::measurement_type, scalar_mode::measurement_type)
	(complex_mode::measurement_type, fixed_size_mode::measurement_type):
	New typedefs.
	(mode_to_nunits): Return a poly_uint16 rather than an unsigned short.
	(GET_MODE_NUNITS): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	* genmodes.c (ZERO_COEFFS): New macro.
	(emit_mode_nunits_inline): Make mode_nunits_inline return a
	poly_uint16.
	(emit_mode_nunits): Change the type of mode_nunits to poly_uint16_pod.
	Use ZERO_COEFFS when emitting initializers.
	* data-streamer.h (bp_pack_poly_value): New function.
	(bp_unpack_poly_value): Likewise.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_NUNITS.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_NUNITS.
	* tree.c (make_vector_type): Remove temporary shim and make
	the real function take the number of units as a poly_uint64
	rather than an int.
	(build_vector_type_for_mode): Handle polynomial nunits.
	* dwarf2out.c (loc_descriptor, add_const_value_attribute): Likewise.
	* emit-rtl.c (const_vec_series_p_1): Likewise.
	(gen_rtx_CONST_VECTOR): Likewise.
	* fold-const.c (test_vec_duplicate_folding): Likewise.
	* genrecog.c (validate_pattern): Likewise.
	* optabs-query.c (can_vec_perm_var_p, can_mult_highpart_p): Likewise.
	* optabs-tree.c (expand_vec_cond_expr_p): Likewise.
	* optabs.c (expand_vector_broadcast, expand_binop_directly): Likewise.
	(shift_amt_for_vec_perm_mask, expand_vec_perm_var): Likewise.
	(expand_vec_cond_expr, expand_mult_highpart): Likewise.
	* rtlanal.c (subreg_get_info): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_grouped_load_supported): Likewise.
	* tree-vect-generic.c (type_for_widest_vector_mode): Likewise.
	* tree-vect-loop.c (have_whole_vector_shift): Likewise.
	* simplify-rtx.c (simplify_unary_operation_1): Likewise.
	(simplify_const_unary_operation, simplify_binary_operation_1)
	(simplify_const_binary_operation, simplify_ternary_operation)
	(test_vector_ops_duplicate, test_vector_ops): Likewise.
	(simplify_immed_subreg): Use GET_MODE_NUNITS on a fixed_size_mode
	instead of CONST_VECTOR_NUNITS.
	* varasm.c (output_constant_pool_2): Likewise.
	* rtx-vector-builder.c (rtx_vector_builder::build): Only include the
	explicit-encoded elements in the XVEC for variable-length vectors.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* lra-constraints.c (curr_insn_transform): Use partial_subreg_p.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* coretypes.h (fixed_size_mode): Declare.
	(fixed_size_mode_pod): New typedef.
	* builtins.h (target_builtins::x_apply_args_mode)
	(target_builtins::x_apply_result_mode): Change type to
	fixed_size_mode_pod.
	* builtins.c (apply_args_size, apply_result_size, result_vector)
	(expand_builtin_apply_args_1, expand_builtin_apply)
	(expand_builtin_return): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* cse.c (hash_rtx_cb): Hash only the encoded elements.
	* cselib.c (cselib_hash_rtx): Likewise.
	* expmed.c (make_tree): Build VECTOR_CSTs directly from the
	CONST_VECTOR encoding.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>
	    Jeff Law  <law@redhat.com>

	PR target/83641
	* config/i386/i386.c (ix86_adjust_stack_and_probe_stack_clash): For
	noreturn probe, use gen_pop instead of ix86_emit_restore_reg_using_pop,
	only set RTX_FRAME_RELATED_P on both the push and pop if cfa_reg is sp
	and add REG_CFA_ADJUST_CFA notes in that case to both insns.

	PR target/83641
	* config/i386/i386.c (ix86_adjust_stack_and_probe_stack_clash): Do not
	explicitly probe *sp in a noreturn function if there were any callee
	register saves or frame pointer is needed.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83621
	* cfgexpand.c (expand_debug_expr): Return NULL if mode is
	BLKmode for ternary, binary or unary expressions.

	PR debug/83645
	* var-tracking.c (delete_vta_debug_insn): New inline function.
	(delete_vta_debug_insns): Add USE_CFG argument, if true, walk just
	insns from get_insns () to NULL instead of each bb separately.
	Use delete_vta_debug_insn.  No longer static.
	(vt_debug_insns_local, variable_tracking_main_1): Adjust
	delete_vta_debug_insns callers.
	* rtl.h (delete_vta_debug_insns): Declare.
	* final.c (rest_of_handle_final): Call delete_vta_debug_insns
	instead of variable_tracking_main.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83603
	* calls.c (maybe_warn_nonstring_arg): Avoid accessing function
	arguments past the endof the argument list in functions declared
	without a prototype.
	* gimple-ssa-warn-restrict.c (wrestrict_dom_walker::check_call):
	Avoid checking when arguments are null.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR c/83559
	* doc/extend.texi (attribute const): Fix a typo.
	* ipa-pure-const.c ((warn_function_const, warn_function_pure): Avoid
	issuing -Wsuggest-attribute for void functions.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Use
	offset_int::from instead of wide_int::to_shwi.
	(maybe_diag_overlap): Remove assertion.
	Use HOST_WIDE_INT_PRINT_DEC instead of %lli.
	* gimple-ssa-sprintf.c (format_directive): Same.
	(parse_directive): Same.
	(sprintf_dom_walker::compute_format_length): Same.
	(try_substitute_return_value): Same.

2018-01-03  Jeff Law  <law@redhat.com>

	PR middle-end/83654
	* explow.c (anti_adjust_stack_and_probe_stack_clash): Test a
	non-constant residual for zero at runtime and avoid probing in
	that case.  Reorganize code for trailing problem to mirror handling
	of the residual.

2018-01-03  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/83501
	* tree-ssa-strlen.c (get_string_cst): New.
	(handle_char_store): Call get_string_cst.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/83593
	* tree-ssa-strlen.c: Include tree-cfg.h.
	(strlen_check_and_optimize_stmt): Add new argument cleanup_eh.
	(strlen_dom_walker): Add new member variable m_cleanup_cfg.
	(strlen_dom_walker::strlen_dom_walker): Initialize m_cleanup_cfg
	to false.
	(strlen_dom_walker::before_dom_children): Call
	gimple_purge_dead_eh_edges. Dump tranformation with details
	dump flags.
	(strlen_dom_walker::before_dom_children): Update call by adding
	new argument cleanup_eh.
	(pass_strlen::execute): Return TODO_cleanup_cfg if needed.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR ipa/83549
	* cif-code.def (VARIADIC_THUNK): New enum value.
	* ipa-fnsummary.c (compute_fn_summary): Do not inline variadic
	thunks.

2018-01-03  Jan Beulich  <jbeulich@suse.com>

	* sse.md (mov<mode>_internal): Tighten condition for when to use
	vmovdqu<ssescalarsize> for TI and OI modes.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	Update copyright years.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR ipa/83594
	* ipa-visibility.c (function_and_variable_visibility): Skip
	functions with noipa attribure.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	* gcc.c (process_command): Update copyright notice dates.
	* gcov-dump.c (print_version): Ditto.
	* gcov.c (print_version): Ditto.
	* gcov-tool.c (print_version): Ditto.
	* gengtype.c (create_file): Ditto.
	* doc/cpp.texi: Bump @copying's copyright year.
	* doc/cppinternals.texi: Ditto.
	* doc/gcc.texi: Ditto.
	* doc/gccint.texi: Ditto.
	* doc/gcov.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* vector-builder.h (vector_builder::m_full_nelts): Change from
	unsigned int to poly_uint64.
	(vector_builder::full_nelts): Update prototype accordingly.
	(vector_builder::new_vector): Likewise.
	(vector_builder::encoded_full_vector_p): Handle polynomial full_nelts.
	(vector_builder::operator ==): Likewise.
	(vector_builder::finalize): Likewise.
	* int-vector-builder.h (int_vector_builder::int_vector_builder):
	Take the number of elements as a poly_uint64 rather than an
	unsigned int.
	* vec-perm-indices.h (vec_perm_indices::m_nelts_per_input): Change
	from unsigned int to poly_uint64.
	(vec_perm_indices::vec_perm_indices): Update prototype accordingly.
	(vec_perm_indices::new_vector): Likewise.
	(vec_perm_indices::length): Likewise.
	(vec_perm_indices::nelts_per_input): Likewise.
	(vec_perm_indices::input_nelts): Likewise.
	* vec-perm-indices.c (vec_perm_indices::new_vector): Take the
	number of elements per input as a poly_uint64 rather than an
	unsigned int.  Use the original encoding for variable-length
	vectors, rather than clamping each individual element.
	For the second and subsequent elements in each pattern,
	clamp the step and base before clamping their sum.
	(vec_perm_indices::series_p): Handle polynomial element counts.
	(vec_perm_indices::all_in_range_p): Likewise.
	(vec_perm_indices_to_tree): Likewise.
	(vec_perm_indices_to_rtx): Likewise.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Likewise.
	* tree-vector-builder.c (tree_vector_builder::new_unary_operation)
	(tree_vector_builder::new_binary_operation): Handle polynomial
	element counts.  Return false if we need to know the number
	of elements at compile time.
	* fold-const.c (fold_vec_perm): Punt if the number of elements
	isn't known at compile time.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* vec-perm-indices.h (vec_perm_builder): Change element type
	from HOST_WIDE_INT to poly_int64.
	(vec_perm_indices::element_type): Update accordingly.
	(vec_perm_indices::clamp): Handle polynomial element_types.
	* vec-perm-indices.c (vec_perm_indices::series_p): Likewise.
	(vec_perm_indices::all_in_range_p): Likewise.
	(tree_to_vec_perm_builder): Check for poly_int64 trees rather
	than shwi trees.
	* vector-builder.h (vector_builder::stepped_sequence_p): Handle
	polynomial vec_perm_indices element types.
	* int-vector-builder.h (int_vector_builder::equal_p): Likewise.
	* fold-const.c (fold_vec_perm): Likewise.
	* optabs.c (shift_amt_for_vec_perm_mask): Likewise.
	* tree-vect-generic.c (lower_vec_perm): Likewise.
	* tree-vect-slp.c (vect_transform_slp_perm_load): Likewise.
	* config/aarch64/aarch64.c (aarch64_evpc_tbl): Cast d->perm
	element type to HOST_WIDE_INT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* alias.c (addr_side_effect_eval): Take the size as a poly_int64
	rather than an int.  Use plus_constant.
	(memrefs_conflict_p): Take the sizes as poly_int64s rather than ints.
	Take the offset "c" as a poly_int64 rather than a HOST_WIDE_INT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* calls.c (emit_call_1, expand_call): Change struct_value_size from
	a HOST_WIDE_INT to a poly_int64.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* calls.c (load_register_parameters): Cope with polynomial
	mode sizes.  Require a constant size for BLKmode parameters
	that aren't described by a PARALLEL.  If BLOCK_REG_PADDING
	forces a parameter to be padded at the lsb end in order to
	fill a complete number of words, require the parameter size
	to be ordered wrt UNITS_PER_WORD.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* reload1.c (spill_stack_slot_width): Change element type
	from unsigned int to poly_uint64_pod.
	(alter_reg): Treat mode sizes as polynomial.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* reload.c (complex_word_subreg_p): New function.
	(reload_inner_reg_of_subreg, push_reload): Use it.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* lra-constraints.c (process_alt_operands): Reject matched
	operands whose sizes aren't ordered.
	(match_reload): Refer to this check here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* builtins.c (expand_ifn_atomic_compare_exchange_into_call): Assert
	that the mode size is in the set {1, 2, 4, 8, 16}.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* var-tracking.c (adjust_mems): Treat mode sizes as polynomial.
	Use plus_constant instead of gen_rtx_PLUS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/cr16/cr16-protos.h (cr16_push_rounding): Declare.
	* config/cr16/cr16.h (PUSH_ROUNDING): Move implementation to...
	* config/cr16/cr16.c (cr16_push_rounding): ...this new function.
	* config/h8300/h8300-protos.h (h8300_push_rounding): Declare.
	* config/h8300/h8300.h (PUSH_ROUNDING): Move implementation to...
	* config/h8300/h8300.c (h8300_push_rounding): ...this new function.
	* config/i386/i386-protos.h (ix86_push_rounding): Declare.
	* config/i386/i386.h (PUSH_ROUNDING): Move implementation to...
	* config/i386/i386.c (ix86_push_rounding): ...this new function.
	* config/m32c/m32c-protos.h (m32c_push_rounding): Take and return
	a poly_int64.
	* config/m32c/m32c.c (m32c_push_rounding): Likewise.
	* config/m68k/m68k-protos.h (m68k_push_rounding): Declare.
	* config/m68k/m68k.h (PUSH_ROUNDING): Move implementation to...
	* config/m68k/m68k.c (m68k_push_rounding): ...this new function.
	* config/pdp11/pdp11-protos.h (pdp11_push_rounding): Declare.
	* config/pdp11/pdp11.h (PUSH_ROUNDING): Move implementation to...
	* config/pdp11/pdp11.c (pdp11_push_rounding): ...this new function.
	* config/stormy16/stormy16-protos.h (xstormy16_push_rounding): Declare.
	* config/stormy16/stormy16.h (PUSH_ROUNDING): Move implementation to...
	* config/stormy16/stormy16.c (xstormy16_push_rounding): ...this new
	function.
	* expr.c (emit_move_resolve_push): Treat the input and result
	of PUSH_ROUNDING as a poly_int64.
	(emit_move_complex_push, emit_single_push_insn_1): Likewise.
	(emit_push_insn): Likewise.
	* lra-eliminations.c (mark_not_eliminable): Likewise.
	* recog.c (push_operand): Likewise.
	* reload1.c (elimination_effects): Likewise.
	* rtlanal.c (nonzero_bits1): Likewise.
	* calls.c (store_one_arg): Likewise.  Require the padding to be
	known at compile time.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (emit_single_push_insn_1): Treat mode sizes as polynomial.
	Use plus_constant instead of gen_rtx_PLUS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* auto-inc-dec.c (set_inc_state): Take the mode size as a poly_int64
	rather than an int.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_real_1): Use tree_to_poly_uint64
	instead of int_size_in_bytes when handling VIEW_CONVERT_EXPRs
	via stack temporaries.  Treat the mode size as polynomial too.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_real_2): When handling conversions involving
	unions, apply tree_to_poly_uint64 to the TYPE_SIZE rather than
	multiplying int_size_in_bytes by BITS_PER_UNIT.  Treat GET_MODE_BISIZE
	as a poly_uint64 too.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* rtlanal.c (subreg_get_info): Handle polynomial mode sizes.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* combine.c (can_change_dest_mode): Handle polynomial
	REGMODE_NATURAL_SIZE.
	* expmed.c (store_bit_field_1): Likewise.
	* expr.c (store_constructor): Likewise.
	* emit-rtl.c (validate_subreg): Operate on polynomial mode sizes
	and polynomial REGMODE_NATURAL_SIZE.
	(gen_lowpart_common): Likewise.
	* reginfo.c (record_subregs_of_mode): Likewise.
	* rtlanal.c (read_modify_subreg_p): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* internal-fn.c (expand_vector_ubsan_overflow): Handle polynomial
	numbers of elements.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* match.pd: Cope with polynomial numbers of vector elements.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* fold-const.c (fold_indirect_ref_1): Handle polynomial offsets
	in a POINTER_PLUS_EXPR.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* omp-simd-clone.c (simd_clone_subparts): New function.
	(simd_clone_init_simd_arrays): Use it instead of TYPE_VECTOR_SUBPARTS.
	(ipa_simd_modify_function_body): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-generic.c (nunits_for_known_piecewise_op): New function.
	(expand_vector_piecewise): Use it instead of TYPE_VECTOR_SUBPARTS.
	(expand_vector_addition, add_rshift, expand_vector_divmod): Likewise.
	(expand_vector_condition, vector_element): Likewise.
	(subparts_gt): New function.
	(get_compute_type): Use subparts_gt.
	(count_type_subparts): Delete.
	(expand_vector_operations_1): Use subparts_gt instead of
	count_type_subparts.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_no_alias_p): Replace with...
	(vect_compile_time_alias): ...this new function.  Do the calculation
	on poly_ints rather than trees.
	(vect_prune_runtime_alias_test_list): Update call accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_build_slp_tree_1): Handle polynomial
	numbers of units.
	(vect_schedule_slp_instance): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Reject
	constant and extern definitions for variable-length vectors.
	(vect_get_constant_vectors): Note that the number of units
	is known to be constant.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (vectorizable_conversion): Treat the number
	of units as polynomial.  Choose between WIDE and NARROW based
	on multiple_p.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (simd_clone_subparts): New function.
	(vectorizable_simd_clone_call): Use it instead of TYPE_VECTOR_SUBPARTS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (vectorizable_call): Treat the number of
	vectors as polynomial.  Use build_index_vector for
	IFN_GOMP_SIMD_LANE.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (get_load_store_type): Treat the number of
	units as polynomial.  Reject VMAT_ELEMENTWISE and VMAT_STRIDED_SLP
	for variable-length vectors.
	(vectorizable_mask_load_store): Treat the number of units as
	polynomial, asserting that it is constant if the condition has
	already been enforced.
	(vectorizable_store, vectorizable_load): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vectorizable_live_operation): Treat the number
	of units as polynomial.  Punt if we can't tell at compile time
	which vector contains the final result.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vectorizable_induction): Treat the number
	of units as polynomial.  Punt on SLP inductions.  Use an integer
	VEC_SERIES_EXPR for variable-length integer reductions.  Use a
	cast of such a series for variable-length floating-point
	reductions.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree.h (build_index_vector): Declare.
	* tree.c (build_index_vector): New function.
	* tree-vect-loop.c (get_initial_defs_for_reduction): Treat the number
	of units as polynomial, forcibly converting it to a constant if
	vectorizable_reduction has already enforced the condition.
	(vect_create_epilog_for_reduction): Likewise.  Use build_index_vector
	to create a {1,2,3,...} vector.
	(vectorizable_reduction): Treat the number of units as polynomial.
	Choose vectype_in based on the largest scalar element size rather
	than the smallest number of units.  Enforce the restrictions
	relied on above.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vector_alignment_reachable_p): Treat the
	number of units as polynomial.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.h (vector_sizes, auto_vector_sizes): New typedefs.
	* target.def (autovectorize_vector_sizes): Return the vector sizes
	by pointer, using vector_sizes rather than a bitmask.
	* targhooks.h (default_autovectorize_vector_sizes): Update accordingly.
	* targhooks.c (default_autovectorize_vector_sizes): Likewise.
	* config/aarch64/aarch64.c (aarch64_autovectorize_vector_sizes):
	Likewise.
	* config/arc/arc.c (arc_autovectorize_vector_sizes): Likewise.
	* config/arm/arm.c (arm_autovectorize_vector_sizes): Likewise.
	* config/i386/i386.c (ix86_autovectorize_vector_sizes): Likewise.
	* config/mips/mips.c (mips_autovectorize_vector_sizes): Likewise.
	* omp-general.c (omp_max_vf): Likewise.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* optabs-query.c (can_vec_mask_load_store_p): Likewise.
	* tree-vect-loop.c (vect_analyze_loop): Likewise.
	* tree-vect-slp.c (vect_slp_bb): Likewise.
	* doc/tm.texi: Regenerate.
	* tree-vectorizer.h (current_vector_size): Change from an unsigned int
	to a poly_uint64.
	* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Take
	the vector size as a poly_uint64 rather than an unsigned int.
	(current_vector_size): Change from an unsigned int to a poly_uint64.
	(get_vectype_for_scalar_type): Update accordingly.
	* tree.h (build_truth_vector_type): Take the size and number of
	units as a poly_uint64 rather than an unsigned int.
	(build_vector_type): Add a temporary overload that takes
	the number of units as a poly_uint64 rather than an unsigned int.
	* tree.c (make_vector_type): Likewise.
	(build_truth_vector_type): Take the number of units as a poly_uint64
	rather than an unsigned int.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (get_mask_mode): Take the number of units and length
	as poly_uint64s rather than unsigned ints.
	* targhooks.h (default_get_mask_mode): Update accordingly.
	* targhooks.c (default_get_mask_mode): Likewise.
	* config/i386/i386.c (ix86_get_mask_mode): Likewise.
	* doc/tm.texi: Regenerate.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* omp-general.h (omp_max_vf): Return a poly_uint64 instead of an int.
	* omp-general.c (omp_max_vf): Likewise.
	* omp-expand.c (omp_adjust_chunk_size): Update call to omp_max_vf.
	(expand_omp_simd): Handle polynomial safelen.
	* omp-low.c (omplow_simd_context): Add a default constructor.
	(omplow_simd_context::max_vf): Change from int to poly_uint64.
	(lower_rec_simd_input_clauses): Update accordingly.
	(lower_rec_input_clauses): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_nunits_for_cost): New function.
	* tree-vect-loop.c (vect_model_reduction_cost): Use it.
	* tree-vect-slp.c (vect_analyze_slp_cost_1): Likewise.
	(vect_analyze_slp_cost): Likewise.
	* tree-vect-stmts.c (vect_model_store_cost): Likewise.
	(vect_model_load_cost): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_record_max_nunits, vect_build_slp_tree_1)
	(vect_build_slp_tree_2, vect_build_slp_tree): Change max_nunits
	from an unsigned int * to a poly_uint64_pod *.
	(calculate_unrolling_factor): New function.
	(vect_analyze_slp_instance): Use it.  Track polynomial max_nunits.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (_slp_instance::unrolling_factor): Change
	from an unsigned int to a poly_uint64.
	(_loop_vec_info::slp_unrolling_factor): Likewise.
	(_loop_vec_info::vectorization_factor): Change from an int
	to a poly_uint64.
	(MAX_VECTORIZATION_FACTOR): Bump from 64 to INT_MAX.
	(vect_get_num_vectors): New function.
	(vect_update_max_nunits, vect_vf_for_cost): Likewise.
	(vect_get_num_copies): Use vect_get_num_vectors.
	(vect_analyze_data_ref_dependences): Change max_vf from an int *
	to an unsigned int *.
	(vect_analyze_data_refs): Change min_vf from an int * to a
	poly_uint64 *.
	(vect_transform_slp_perm_load): Take the vf as a poly_uint64 rather
	than an unsigned HOST_WIDE_INT.
	* tree-vect-data-refs.c (vect_analyze_possibly_independent_ddr)
	(vect_analyze_data_ref_dependence): Change max_vf from an int *
	to an unsigned int *.
	(vect_analyze_data_ref_dependences): Likewise.
	(vect_compute_data_ref_alignment): Handle polynomial vf.
	(vect_enhance_data_refs_alignment): Likewise.
	(vect_prune_runtime_alias_test_list): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	(vect_supportable_dr_alignment): Likewise.
	(dependence_distance_ge_vf): Take the vectorization factor as a
	poly_uint64 rather than an unsigned HOST_WIDE_INT.
	(vect_analyze_data_refs): Change min_vf from an int * to a
	poly_uint64 *.
	* tree-vect-loop-manip.c (vect_gen_scalar_loop_niters): Take
	vfm1 as a poly_uint64 rather than an int.  Make the same change
	for the returned bound_scalar.
	(vect_gen_vector_loop_niters): Handle polynomial vf.
	(vect_do_peeling): Likewise.  Update call to
	vect_gen_scalar_loop_niters and handle polynomial bound_scalars.
	(vect_gen_vector_loop_niters_mult_vf): Assert that the vf must
	be constant.
	* tree-vect-loop.c (vect_determine_vectorization_factor)
	(vect_update_vf_for_slp, vect_analyze_loop_2): Handle polynomial vf.
	(vect_get_known_peeling_cost): Likewise.
	(vect_estimate_min_profitable_iters, vectorizable_reduction): Likewise.
	(vect_worthwhile_without_simd_p, vectorizable_induction): Likewise.
	(vect_transform_loop): Likewise.  Use the lowest possible VF when
	updating the upper bounds of the loop.
	(vect_min_worthwhile_factor): Make static.  Return an unsigned int
	rather than an int.
	* tree-vect-slp.c (vect_attempt_slp_rearrange_stmts): Cope with
	polynomial unroll factors.
	(vect_analyze_slp_cost_1, vect_analyze_slp_instance): Likewise.
	(vect_make_slp_decision): Likewise.
	(vect_supported_load_permutation_p): Likewise, and polynomial
	vf too.
	(vect_analyze_slp_cost): Handle polynomial vf.
	(vect_slp_analyze_node_operations): Likewise.
	(vect_slp_analyze_bb_1): Likewise.
	(vect_transform_slp_perm_load): Take the vf as a poly_uint64 rather
	than an unsigned HOST_WIDE_INT.
	* tree-vect-stmts.c (vectorizable_simd_clone_call, vectorizable_store)
	(vectorizable_load): Handle polynomial vf.
	* tree-vectorizer.c (simduid_to_vf::vf): Change from an int to
	a poly_uint64.
	(adjust_simduid_builtins, shrink_simd_arrays): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* match.pd: Handle bit operations involving three constants
	and try to fold one pair.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-loop-manip.c: Include gimple-fold.h.
	(slpeel_make_loop_iterate_ntimes): Add step, final_iv and
	niters_maybe_zero parameters.  Handle other cases besides a step of 1.
	(vect_gen_vector_loop_niters): Add a step_vector_ptr parameter.
	Add a path that uses a step of VF instead of 1, but disable it
	for now.
	(vect_do_peeling): Add step_vector, niters_vector_mult_vf_var
	and niters_no_overflow parameters.  Update calls to
	slpeel_make_loop_iterate_ntimes and vect_gen_vector_loop_niters.
	Create a new SSA name if the latter choses to use a ste other
	than zero, and return it via niters_vector_mult_vf_var.
	* tree-vect-loop.c (vect_transform_loop): Update calls to
	vect_do_peeling, vect_gen_vector_loop_niters and
	slpeel_make_loop_iterate_ntimes.
	* tree-vectorizer.h (slpeel_make_loop_iterate_ntimes, vect_do_peeling)
	(vect_gen_vector_loop_niters): Update declarations after above changes.

2018-01-02  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (floor<mode>2): Add support for IEEE
	128-bit round to integer instructions.
	(ceil<mode>2): Likewise.
	(btrunc<mode>2): Likewise.
	(round<mode>2): Likewise.

2018-01-02  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000-string.c (expand_block_move): Allow the use of
	unaligned VSX load/store on P8/P9.
	(expand_block_clear): Allow the use of unaligned VSX
	load/store on P8/P9.

2018-01-02  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000-p8swap.c (swap_feeds_both_load_and_store):
	New function.
	(rs6000_analyze_swaps): Mark a web unoptimizable if it contains a
	swap associated with both a load and a store.

2018-01-02  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/linux.h (ICACHE_FLUSH_FUNC): New.
	* config/riscv/riscv.md (clear_cache): Use it.

2018-01-02  Artyom Skrobov  <tyomitch@gmail.com>

	* web.c: Remove out-of-date comment.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* expr.c (fixup_args_size_notes): Check that any existing
	REG_ARGS_SIZE notes are correct, and don't try to re-add them.
	(emit_single_push_insn_1): Move stack_pointer_delta adjustment to...
	(emit_single_push_insn): ...here.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* rtl.h (CONST_VECTOR_ELT): Redefine to const_vector_elt.
	(const_vector_encoded_nelts): New function.
	(CONST_VECTOR_NUNITS): Redefine to use GET_MODE_NUNITS.
	(const_vector_int_elt, const_vector_elt): Declare.
	* emit-rtl.c (const_vector_int_elt_1): New function.
	(const_vector_elt): Likewise.
	* simplify-rtx.c (simplify_immed_subreg): Avoid taking the address
	of CONST_VECTOR_ELT.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* expr.c: Include rtx-vector-builder.h.
	(const_vector_mask_from_tree): Use rtx_vector_builder and operate
	directly on the tree encoding.
	(const_vector_from_tree): Likewise.
	* optabs.c: Include rtx-vector-builder.h.
	(expand_vec_perm_var): Use rtx_vector_builder and create a repeating
	sequence of "u" values.
	* vec-perm-indices.c: Include rtx-vector-builder.h.
	(vec_perm_indices_to_rtx): Use rtx_vector_builder and operate
	directly on the vec_perm_indices encoding.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi (const_vector): Describe new encoding scheme.
	* Makefile.in (OBJS): Add rtx-vector-builder.o.
	* rtx-vector-builder.h: New file.
	* rtx-vector-builder.c: Likewise.
	* rtl.h (rtx_def::u2): Add a const_vector field.
	(CONST_VECTOR_NPATTERNS): New macro.
	(CONST_VECTOR_NELTS_PER_PATTERN): Likewise.
	(CONST_VECTOR_DUPLICATE_P): Likewise.
	(CONST_VECTOR_STEPPED_P): Likewise.
	(CONST_VECTOR_ENCODED_ELT): Likewise.
	(const_vec_duplicate_p): Check for a duplicated vector encoding.
	(unwrap_const_vec_duplicate): Likewise.
	(const_vec_series_p): Check for a non-duplicated vector encoding.
	Say that the function only returns true for integer vectors.
	* emit-rtl.c: Include rtx-vector-builder.h.
	(gen_const_vec_duplicate_1): Delete.
	(gen_const_vector): Call gen_const_vec_duplicate instead of
	gen_const_vec_duplicate_1.
	(const_vec_series_p_1): Operate directly on the CONST_VECTOR encoding.
	(gen_const_vec_duplicate): Use rtx_vector_builder.
	(gen_const_vec_series): Likewise.
	(gen_rtx_CONST_VECTOR): Likewise.
	* config/powerpcspe/powerpcspe.c: Include rtx-vector-builder.h.
	(swap_const_vector_halves): Take an rtx pointer rather than rtx.
	Build a new vector rather than modifying a CONST_VECTOR in-place.
	(handle_special_swappables): Update call accordingly.
	* config/rs6000/rs6000-p8swap.c: Include rtx-vector-builder.h.
	(swap_const_vector_halves): Take an rtx pointer rather than rtx.
	Build a new vector rather than modifying a CONST_VECTOR in-place.
	(handle_special_swappables): Update call accordingly.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* simplify-rtx.c (simplify_const_binary_operation): Use
	CONST_VECTOR_ELT instead of XVECEXP.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-cfg.c (verify_gimple_assign_ternary): Allow the size of
	the selector elements to be different from the data elements
	if the selector is a VECTOR_CST.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Use a vector of
	ssizetype for the selector.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (shift_amt_for_vec_perm_mask): Try using series_p
	before testing each element individually.
	* tree-vect-generic.c (lower_vec_perm): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* selftest.h (selftest::vec_perm_indices_c_tests): Declare.
	* selftest-run-tests.c (selftest::run_tests): Call it.
	* vector-builder.h (vector_builder::operator ==): New function.
	(vector_builder::operator !=): Likewise.
	* vec-perm-indices.h (vec_perm_indices::series_p): Declare.
	(vec_perm_indices::all_from_input_p): New function.
	* vec-perm-indices.c (vec_perm_indices::series_p): Likewise.
	(test_vec_perm_12, selftest::vec_perm_indices_c_tests): Likewise.
	* fold-const.c (fold_ternary_loc): Use tree_to_vec_perm_builder
	instead of reading the VECTOR_CST directly.  Detect whether both
	vector inputs are the same before constructing the vec_perm_indices,
	and update the number of inputs argument accordingly.  Use the
	utility functions added above.  Only construct sel2 if we need to.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (expand_vec_perm_var): Use an explicit encoding for
	the broadcast of the low byte.
	(expand_mult_highpart): Use an explicit encoding for the permutes.
	* optabs-query.c (can_mult_highpart_p): Likewise.
	* tree-vect-loop.c (calc_vec_perm_mask_for_shift): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_bswap): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Use an
	explicit encoding for the power-of-2 permutes.
	(vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_permute_load_chain): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* vec-perm-indices.h (vec_perm_indices_to_tree): Declare.
	* vec-perm-indices.c (vec_perm_indices_to_tree): New function.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Use it.
	* tree-vect-slp.c (vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (vectorizable_bswap): Likewise.
	(vect_gen_perm_mask_any): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* int-vector-builder.h: New file.
	* vec-perm-indices.h: Include int-vector-builder.h.
	(vec_perm_indices): Redefine as an int_vector_builder.
	(auto_vec_perm_indices): Delete.
	(vec_perm_builder): Redefine as a stand-alone class.
	(vec_perm_indices::vec_perm_indices): New function.
	(vec_perm_indices::clamp): Likewise.
	* vec-perm-indices.c: Include fold-const.h and tree-vector-builder.h.
	(vec_perm_indices::new_vector): New function.
	(vec_perm_indices::new_expanded_vector): Update for new
	vec_perm_indices class.
	(vec_perm_indices::rotate_inputs): New function.
	(vec_perm_indices::all_in_range_p): Operate directly on the
	encoded form, without computing elided elements.
	(tree_to_vec_perm_builder): Operate directly on the VECTOR_CST
	encoding.  Update for new vec_perm_indices class.
	* optabs.c (expand_vec_perm_const): Create a vec_perm_indices for
	the given vec_perm_builder.
	(expand_vec_perm_var): Update vec_perm_builder constructor.
	(expand_mult_highpart): Use vec_perm_builder instead of
	auto_vec_perm_indices.
	* optabs-query.c (can_mult_highpart_p): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Use a single
	or double series encoding as appropriate.
	* fold-const.c (fold_ternary_loc): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_permute_load_chain): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-slp.c (vect_build_slp_tree_1): Likewise.
	(vect_transform_slp_perm_load): Likewise.
	(vect_schedule_slp_instance): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_mask_load_store): Likewise.
	(vectorizable_bswap): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	* tree-vect-generic.c (lower_vec_perm): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Use
	tree_to_vec_perm_builder to read the vector from a tree.
	* tree-vect-loop.c (calc_vec_perm_mask_for_shift): Take a
	vec_perm_builder instead of a vec_perm_indices.
	(have_whole_vector_shift): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Leave the
	truncation to calc_vec_perm_mask_for_shift.
	(vect_create_epilog_for_reduction): Likewise.
	* config/aarch64/aarch64.c (expand_vec_perm_d::perm): Change
	from auto_vec_perm_indices to vec_perm_indices.
	(aarch64_expand_vec_perm_const_1): Use rotate_inputs on d.perm
	instead of changing individual elements.
	(aarch64_vectorize_vec_perm_const): Use new_vector to install
	the vector in d.perm.
	* config/arm/arm.c (expand_vec_perm_d::perm): Change
	from auto_vec_perm_indices to vec_perm_indices.
	(arm_expand_vec_perm_const_1): Use rotate_inputs on d.perm
	instead of changing individual elements.
	(arm_vectorize_vec_perm_const): Use new_vector to install
	the vector in d.perm.
	* config/powerpcspe/powerpcspe.c (rs6000_expand_extract_even):
	Update vec_perm_builder constructor.
	(rs6000_expand_interleave): Likewise.
	* config/rs6000/rs6000.c (rs6000_expand_extract_even): Likewise.
	(rs6000_expand_interleave): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.c (can_vec_perm_var_p): Check whether lowering
	to qimode could truncate the indices.
	* optabs.c (expand_vec_perm_var): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* Makefile.in (OBJS): Add vec-perm-indices.o.
	* vec-perm-indices.h: New file.
	* vec-perm-indices.c: Likewise.
	* target.h (vec_perm_indices): Replace with a forward class
	declaration.
	(auto_vec_perm_indices): Move to vec-perm-indices.h.
	* optabs.h: Include vec-perm-indices.h.
	(expand_vec_perm): Delete.
	(selector_fits_mode_p, expand_vec_perm_var): Declare.
	(expand_vec_perm_const): Declare.
	* target.def (vec_perm_const_ok): Replace with...
	(vec_perm_const): ...this new hook.
	* doc/tm.texi.in (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Replace with...
	(TARGET_VECTORIZE_VEC_PERM_CONST): ...this new hook.
	* doc/tm.texi: Regenerate.
	* optabs.def (vec_perm_const): Delete.
	* doc/md.texi (vec_perm_const): Likewise.
	(vec_perm): Refer to TARGET_VECTORIZE_VEC_PERM_CONST.
	* expr.c (expand_expr_real_2): Use expand_vec_perm_const rather than
	expand_vec_perm for constant permutation vectors.  Assert that
	the mode of variable permutation vectors is the integer equivalent
	of the mode that is being permuted.
	* optabs-query.h (selector_fits_mode_p): Declare.
	* optabs-query.c: Include vec-perm-indices.h.
	(selector_fits_mode_p): New function.
	(can_vec_perm_const_p): Check whether targetm.vectorize.vec_perm_const
	is defined, instead of checking whether the vec_perm_const_optab
	exists.  Use targetm.vectorize.vec_perm_const instead of
	targetm.vectorize.vec_perm_const_ok.  Check whether the indices
	fit in the vector mode before using a variable permute.
	* optabs.c (shift_amt_for_vec_perm_mask): Take a mode and a
	vec_perm_indices instead of an rtx.
	(expand_vec_perm): Replace with...
	(expand_vec_perm_const): ...this new function.  Take the selector
	as a vec_perm_indices rather than an rtx.  Also take the mode of
	the selector.  Update call to shift_amt_for_vec_perm_mask.
	Use targetm.vectorize.vec_perm_const instead of vec_perm_const_optab.
	Use vec_perm_indices::new_expanded_vector to expand the original
	selector into bytes.  Check whether the indices fit in the vector
	mode before using a variable permute.
	(expand_vec_perm_var): Make global.
	(expand_mult_highpart): Use expand_vec_perm_const.
	* fold-const.c: Includes vec-perm-indices.h.
	* tree-ssa-forwprop.c: Likewise.
	* tree-vect-data-refs.c: Likewise.
	* tree-vect-generic.c: Likewise.
	* tree-vect-loop.c: Likewise.
	* tree-vect-slp.c: Likewise.
	* tree-vect-stmts.c: Likewise.
	* config/aarch64/aarch64-protos.h (aarch64_expand_vec_perm_const):
	Delete.
	* config/aarch64/aarch64-simd.md (vec_perm_const<mode>): Delete.
	* config/aarch64/aarch64.c (aarch64_expand_vec_perm_const)
	(aarch64_vectorize_vec_perm_const_ok): Fuse into...
	(aarch64_vectorize_vec_perm_const): ...this new function.
	(TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	* config/arm/arm-protos.h (arm_expand_vec_perm_const): Delete.
	* config/arm/vec-common.md (vec_perm_const<mode>): Delete.
	* config/arm/arm.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(arm_expand_vec_perm_const, arm_vectorize_vec_perm_const_ok): Merge
	into...
	(arm_vectorize_vec_perm_const): ...this new function.  Explicitly
	check for NEON modes.
	* config/i386/i386-protos.h (ix86_expand_vec_perm_const): Delete.
	* config/i386/sse.md (VEC_PERM_CONST, vec_perm_const<mode>): Delete.
	* config/i386/i386.c (ix86_expand_vec_perm_const_1): Update comment.
	(ix86_expand_vec_perm_const, ix86_vectorize_vec_perm_const_ok): Merge
	into...
	(ix86_vectorize_vec_perm_const): ...this new function.  Incorporate
	the old VEC_PERM_CONST conditions.
	* config/ia64/ia64-protos.h (ia64_expand_vec_perm_const): Delete.
	* config/ia64/vect.md (vec_perm_const<mode>): Delete.
	* config/ia64/ia64.c (ia64_expand_vec_perm_const)
	(ia64_vectorize_vec_perm_const_ok): Merge into...
	(ia64_vectorize_vec_perm_const): ...this new function.
	* config/mips/loongson.md (vec_perm_const<mode>): Delete.
	* config/mips/mips-msa.md (vec_perm_const<mode>): Delete.
	* config/mips/mips-ps-3d.md (vec_perm_constv2sf): Delete.
	* config/mips/mips-protos.h (mips_expand_vec_perm_const): Delete.
	* config/mips/mips.c (mips_expand_vec_perm_const)
	(mips_vectorize_vec_perm_const_ok): Merge into...
	(mips_vectorize_vec_perm_const): ...this new function.
	* config/powerpcspe/altivec.md (vec_perm_constv16qi): Delete.
	* config/powerpcspe/paired.md (vec_perm_constv2sf): Delete.
	* config/powerpcspe/spe.md (vec_perm_constv2si): Delete.
	* config/powerpcspe/vsx.md (vec_perm_const<mode>): Delete.
	* config/powerpcspe/powerpcspe-protos.h (altivec_expand_vec_perm_const)
	(rs6000_expand_vec_perm_const): Delete.
	* config/powerpcspe/powerpcspe.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK):
	Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(altivec_expand_vec_perm_const_le): Take each operand individually.
	Operate on constant selectors rather than rtxes.
	(altivec_expand_vec_perm_const): Likewise.  Update call to
	altivec_expand_vec_perm_const_le.
	(rs6000_expand_vec_perm_const): Delete.
	(rs6000_vectorize_vec_perm_const_ok): Delete.
	(rs6000_vectorize_vec_perm_const): New function.
	(rs6000_do_expand_vec_perm): Take a vec_perm_builder instead of
	an element count and rtx array.
	(rs6000_expand_extract_even): Update call accordingly.
	(rs6000_expand_interleave): Likewise.
	* config/rs6000/altivec.md (vec_perm_constv16qi): Delete.
	* config/rs6000/paired.md (vec_perm_constv2sf): Delete.
	* config/rs6000/vsx.md (vec_perm_const<mode>): Delete.
	* config/rs6000/rs6000-protos.h (altivec_expand_vec_perm_const)
	(rs6000_expand_vec_perm_const): Delete.
	* config/rs6000/rs6000.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(altivec_expand_vec_perm_const_le): Take each operand individually.
	Operate on constant selectors rather than rtxes.
	(altivec_expand_vec_perm_const): Likewise.  Update call to
	altivec_expand_vec_perm_const_le.
	(rs6000_expand_vec_perm_const): Delete.
	(rs6000_vectorize_vec_perm_const_ok): Delete.
	(rs6000_vectorize_vec_perm_const): New function.  Remove stray
	reference to the SPE evmerge intructions.
	(rs6000_do_expand_vec_perm): Take a vec_perm_builder instead of
	an element count and rtx array.
	(rs6000_expand_extract_even): Update call accordingly.
	(rs6000_expand_interleave): Likewise.
	* config/sparc/sparc.md (vec_perm_constv8qi): Delete in favor of...
	* config/sparc/sparc.c (sparc_vectorize_vec_perm_const): ...this
	new function.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (expand_vec_perm_1): Assert that SEL has an integer
	vector mode and that that mode matches the mode of the data
	being permuted.
	(expand_vec_perm): Split handling of non-CONST_VECTOR selectors
	out into expand_vec_perm_var.  Do all CONST_VECTOR handling here,
	directly using expand_vec_perm_1 when forcing selectors into
	registers.
	(expand_vec_perm_var): New function, split out from expand_vec_perm.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (can_vec_perm_p): Delete.
	(can_vec_perm_var_p, can_vec_perm_const_p): Declare.
	* optabs-query.c (can_vec_perm_p): Split into...
	(can_vec_perm_var_p, can_vec_perm_const_p): ...these two functions.
	(can_mult_highpart_p): Use can_vec_perm_const_p to test whether a
	particular selector is valid.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-slp.c (vect_build_slp_tree_1): Likewise.
	(vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_bswap): Likewise.
	(vect_gen_perm_mask_checked): Likewise.
	* fold-const.c (fold_ternary_loc): Likewise.  Don't take
	implementations of variable permutation vectors into account
	when deciding which selector to use.
	* tree-vect-loop.c (have_whole_vector_shift): Don't check whether
	vec_perm_const_optab is supported; instead use can_vec_perm_const_p
	with a false third argument.
	* tree-vect-generic.c (lower_vec_perm): Use can_vec_perm_const_p
	to test whether the constant selector is valid and can_vec_perm_var_p
	to test whether a variable selector is valid.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (can_vec_perm_p): Take a const vec_perm_indices *.
	* optabs-query.c (can_vec_perm_p): Likewise.
	* fold-const.c (fold_vec_perm): Take a const vec_perm_indices &
	instead of vec_perm_indices.
	* tree-vectorizer.h (vect_gen_perm_mask_any): Likewise,
	(vect_gen_perm_mask_checked): Likewise,
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Likewise,
	(vect_gen_perm_mask_checked): Likewise,

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (qimode_for_vec_perm): Declare.
	* optabs-query.c (can_vec_perm_p): Split out qimode search to...
	(qimode_for_vec_perm): ...this new function.
	* optabs.c (expand_vec_perm): Use qimode_for_vec_perm.

2018-01-02  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* rtlanal.c (canonicalize_condition): Return 0 if final rtx
	does not have a conditional at the top.

2018-01-02  Richard Biener  <rguenther@suse.de>

	* ipa-inline.c (big_speedup_p): Fix expression.

2018-01-02  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	* config/i386/x86-tune-costs.h: Increase cost of integer load costs
	for generic 4->6.

2018-01-02  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	Generic tuning.
	* x86-tune-costs.h (generic_cost): Reduce cost of FDIV 20->17,
	cost of sqrt 20->14, DIVSS 18->13, DIVSD 32->17, SQRtSS 30->14
	and SQRTsD 58->18, cond_not_taken_branch_cost. 2->1. Increase
	cond_taken_branch_cost 3->4.

2018-01-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83581
	* tree-loop-distribution.c (pass_loop_distribution::execute): Return
	TODO_cleanup_cfg if any changes have been made.

	PR middle-end/83608
	* expr.c (store_expr_with_bounds): Use simplify_gen_subreg instead of
	convert_modes if target mode has the right side, but different mode
	class.

	PR middle-end/83609
	* expr.c (expand_assignment): Fix up a typo in simplify_gen_subreg
	last argument when extracting from CONCAT.  If either from_real or
	from_imag is NULL, use expansion through memory.  If result is not
	a CONCAT and simplify_gen_subreg fails, try to simplify_gen_subreg
	the parts directly to inner mode, if even that fails, use expansion
	through memory.

	PR middle-end/83623
	* expmed.c (expand_shift_1): For 2-byte rotates by BITS_PER_UNIT,
	check for bswap in mode rather than HImode and use that in expand_unop
	too.

Copyright (C) 2018 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
