FIREWALLD.DBUS(5)

NAME
firewalld.dbus - firewalld D-Bus interface description

OBJECT PATHS

This is the basic firewalld object path structure. The used interfaces are explained below in the section called “INTERFACES”.

    /org/fedoraproject/FirewallD1
      Interfaces
        org.fedoraproject.FirewallD1
        org.fedoraproject.FirewallD1.direct (deprecated)
        org.fedoraproject.FirewallD1.ipset
        org.fedoraproject.FirewallD1.policies (deprecated)
        org.fedoraproject.FirewallD1.zone
        org.freedesktop.DBus.Introspectable
        org.freedesktop.DBus.Properties

    /org/fedoraproject/FirewallD1/config
      Interfaces
        org.fedoraproject.FirewallD1.config
        org.fedoraproject.FirewallD1.config.direct (deprecated)
        org.fedoraproject.FirewallD1.config.policies (deprecated)
        org.freedesktop.DBus.Introspectable
        org.freedesktop.DBus.Properties

    /org/fedoraproject/FirewallD1/config/zone/i
      Interfaces
        org.fedoraproject.FirewallD1.config.zone
        org.freedesktop.DBus.Introspectable
        org.freedesktop.DBus.Properties

    /org/fedoraproject/FirewallD1/config/service/i
      Interfaces:
        org.fedoraproject.FirewallD1.config.service
        org.freedesktop.DBus.Introspectable
        org.freedesktop.DBus.Properties

    /org/fedoraproject/FirewallD1/config/ipset/i
      Interfaces
        org.fedoraproject.FirewallD1.config.ipset
        org.freedesktop.DBus.Introspectable
        org.freedesktop.DBus.Properties

    /org/fedoraproject/FirewallD1/config/icmptype/i
      Interfaces
        org.fedoraproject.FirewallD1.config.icmptype
        org.freedesktop.DBus.Introspectable
        org.freedesktop.DBus.Properties

INTERFACES

  org.fedoraproject.FirewallD1

This interface contains general runtime operations, like: reloading, panic mode, default zone handling, getting services and icmp types and their settings.

Methods

    authorizeAll() → Nothing
        Initiate authorization for the complete firewalld D-Bus interface. This method it mostly useful for configuration applications.

    completeReload() → Nothing
        Reload firewall completely, even netfilter kernel modules. This will most likely terminate active connections, because state information is lost. This option should only be used in case of severe firewall problems. For example if there are state information problems that no connection can be established with correct firewall rules.

    disablePanicMode() → Nothing

        resetToDefaults() → Nothing
            Reset firewall to its default configuration, then reload firewall. This effects both runtime and permanent configuration.
        Disable panic mode. After disabling panic mode established connections might work again, if panic mode was enabled for a short period of time.

        Possible errors: NOT_ENABLED, COMMAND_FAILED

    enablePanicMode() → Nothing
        Enable panic mode. All incoming and outgoing packets are dropped, active connections will expire. Enable this only if there are serious problems with your network environment.

        Possible errors: ALREADY_ENABLED, COMMAND_FAILED

    getAutomaticHelpers() → s
        Deprecated. This always returns "no".

    getDefaultZone() → s
        Return default zone.

    getHelperSettings(s: helper) → (sssssa(ss))
        Return runtime settings of given helper. For getting permanent settings see org.fedoraproject.FirewallD1.config.helper.Methods.getSettings. Settings are in format: version, name, description, family, module and array of ports.

        version (s): see version attribute of helper tag in firewalld.helper(5).

        name (s): see short tag in firewalld.helper(5).

        description (s): see description tag in firewalld.helper(5).

        family (s): see family tag in firewalld.helper(5).

        module (s): see module tag in firewalld.helper(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.helper(5).

        Possible errors: INVALID_HELPER

    getHelpers() → as
        Return array of helper names (s) in runtime configuration. For permanent configuration see org.fedoraproject.FirewallD1.config.Methods.listHelpers.

    getIcmpTypeSettings(s: icmptype) → (sssas)
        Return runtime settings of given icmptype. For getting permanent settings see org.fedoraproject.FirewallD1.config.icmptype.Methods.getSettings. Settings are in format: version, name, description, array of destinations.

        version (s): see version attribute of icmptype tag in firewalld.icmptype(5).

        name (s): see short tag in firewalld.icmptype(5).

        description (s): see description tag in firewalld.icmptype(5).

        destinations (as): array, either empty or containing strings 'ipv4' or 'ipv6', see destination tag in firewalld.icmptype(5).

        Possible errors: INVALID_ICMPTYPE

    getLogDenied() → s
        Returns the LogDenied value. If LogDenied is enabled, then logging rules are added right before reject and drop rules in the INPUT, FORWARD and OUTPUT chains for the default rules and also final reject and drop rules in zones. Possible values are: all, unicast, broadcast, multicast and off. The default value is off

    getServiceSettings(s: service) → (sssa(ss)asa{ss}asa(ss))
        This function is deprecated, use org.fedoraproject.FirewallD1.Methods.getServiceSettings2 instead.

    getServiceSettings2(s: service) → s{sv}
        Return runtime settings of given service. For getting permanent settings see org.fedoraproject.FirewallD1.config.service.Methods.getSettings2. Settings are a dictionary indexed by keywords. For the type of each value see below. If the value is empty it may be omitted.

        version (s): see version attribute of service tag in firewalld.service(5).

        name (s): see short tag in firewalld.service(5).

        description (s): see description tag in firewalld.service(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.service(5).

        module names (as): array of kernel netfilter helpers, see module tag in firewalld.service(5).

        destinations (a{ss}): dictionary of {IP family : IP address} where 'IP family' key can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

        protocols (as): array of protocols, see protocol tag in firewalld.service(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.service(5).

        includes (as): array of service includes, see include tag in firewalld.service(5).

        helpers (as): array of service helpers, see helper tag in firewalld.service(5).

        Possible errors: INVALID_SERVICE

    getZoneSettings(s: zone) → (sssbsasa(ss)asba(ssss)asasasasa(ss)b)
        This function is deprecated, use org.fedoraproject.FirewallD1.zone.Methods.getZoneSettings2 instead.

    listIcmpTypes() → as
        Return array of names (s) of icmp types in runtime configuration. For permanent configuration see org.fedoraproject.FirewallD1.config.Methods.listIcmpTypes.

    listServices() → as
        Return array of service names (s) in runtime configuration. For permanent configuration see org.fedoraproject.FirewallD1.config.Methods.listServices.

    queryPanicMode() → b
        Return true if panic mode is enabled, false otherwise. In panic mode all incoming and outgoing packets are dropped.

    reload() → Nothing
        Reload firewall rules and keep state information. Current permanent configuration will become new runtime configuration, i.e. all runtime only changes done until reload are lost with reload if they have not been also in permanent configuration.

    runtimeToPermanent() → Nothing
        Make runtime settings permanent. Replaces permanent settings with runtime settings for zones, policies, services, icmptypes, and direct (deprecated).

        Possible errors: RT_TO_PERM_FAILED

    checkPermanentConfig() → Nothing
        Run checks on the permanent configuration. This is most useful if changes were made manually to configuration files.

        Possible errors: any

    setDefaultZone(s: zone) → Nothing
        Set default zone for connections and interfaces where no zone has been selected to zone. Setting the default zone changes the zone for the connections or interfaces, that are using the default zone. This is a runtime and permanent change.

        Possible errors: ZONE_ALREADY_SET, COMMAND_FAILED

    setLogDenied(s: value) → Nothing
        Set LogDenied value to value. If LogDenied is enabled, then logging rules are added right before reject and drop rules in the INPUT, FORWARD and OUTPUT chains for the default rules and also final reject and drop rules in zones. Possible values are: all, unicast, broadcast, multicast and off. The default value is off This is a runtime and permanent change.

        Possible errors: ALREADY_SET, INVALID_VALUE

Signals

    DefaultZoneChanged(s: zone)
        Emitted when default zone has been changed to zone.

    LogDeniedChanged(s: value)
        Emitted when LogDenied value has been changed.

    PanicModeDisabled()
        Emitted when panic mode has been deactivated.

    PanicModeEnabled()
        Emitted when panic mode has been activated.

    Reloaded()
        Emitted when firewalld has been reloaded. Also emitted for a complete reload.

Properties

    BRIDGE - b - (ro)
        Indicates whether the firewall has ethernet bridge support.

    IPSet - b - (ro)
        Indicates whether the firewall has IPSet support.

    IPSetTypes - as - (ro)
        The supported IPSet types by ipset and firewalld.

    IPv4 - b - (ro)
        Indicates whether the firewall has IPv4 support.

    IPv4ICMPTypes - as - (ro)
        The list of supported IPv4 ICMP types.

    IPv6 - b - (ro)
        Indicates whether the firewall has IPv6 support.

    IPv6_rpfilter - b - (ro)
        Indicates whether the reverse path filter test on a packet for IPv6 is enabled. If a reply to the packet would be sent via the same interface that the packet arrived on, the packet will match and be accepted, otherwise dropped.

    IPv6ICMPTypes - as - (ro)
        The list of supported IPv6 ICMP types.

    nf_conntrach_helper_setting - b - (ro)
        Deprecated. Always False.

    nf_conntrack_helpers - a{sas} - (ro)
        Deprecated. Always returns an empty dictionary.

    nf_nat_helpers - a{sas} - (ro)
        Deprecated. Always returns an empty dictionary.

    interface_version - s - (ro)
        firewalld D-Bus interface version string.

    state - s - (ro)
        firewalld state. This can be either INIT, FAILED, or RUNNING. In INIT state, firewalld is starting up and initializing. In FAILED state, firewalld completely started but experienced a failure.

    version - s - (ro)
        firewalld version string.

  org.fedoraproject.FirewallD1.ipset

Operations in this interface allows one to get, add, remove and query runtime ipset settings. For permanent configuration see org.fedoraproject.FirewallD1.config.ipset interface.

Methods

    addEntry(s: ipset, s: entry) → as
        Add a new entry to ipset. The entry must match the type of the ipset. If the ipset is using the timeout option, it is not possible to see the entries, as they are timing out automatically in the kernel. For permanent operation see org.fedoraproject.FirewallD1.config.ipset.Methods.addEntry.

        Possible errors: INVALID_IPSET, IPSET_WITH_TIMEOUT

    getEntries(s: ipset) → Nothing
        Get all entries added to the ipset. If the ipset is using the timeout option, it is not possible to see the entries, as they are timing out automatically in the kernel. Return value is a array of entry. For permanent operation see org.fedoraproject.FirewallD1.config.ipset.Methods.getEntries.

        Possible errors: INVALID_IPSET, IPSET_WITH_TIMEOUT

    getIPSetSettings(s: ipset) → (ssssa{ss}as)
        Return runtime settings of given ipset. For getting permanent settings see org.fedoraproject.FirewallD1.config.ipset.Methods.getSettings. Settings are in format: version, name, description, type, dictionary of options and array of entries.

        version (s): see version attribute of ipset tag in firewalld.ipset(5).

        name (s): see short tag in firewalld.ipset(5).

        description (s): see description tag in firewalld.ipset(5).

        type (s): see type attribute of ipset tag in firewalld.ipset(5).

        options (a{ss}): dictionary of {option : value} . See options tag in firewalld.ipset(5).

        entries (as): array of entries, see entry tag in firewalld.ipset(5).

        Possible errors: INVALID_IPSET

    getIPSets() → as
        Return array of ipset names (s) in runtime configuration. For permanent configuration see org.fedoraproject.FirewallD1.config.Methods.listIPSets.

    queryEntry(s: ipset, s: entry) → b
        Return whether entry has been added to ipset. For permanent operation see org.fedoraproject.FirewallD1.config.ipset.Methods.queryEntry.

        Possible errors: INVALID_IPSET

    queryIPSet(s: ipset) → b
        Return whether ipset is defined in runtime configuration.

    removeEntry(s: ipset, s: entry) → as
        Removes an entry from ipset. For permanent operation see org.fedoraproject.FirewallD1.config.ipset.Methods.removeEntry.

        Possible errors: INVALID_IPSET, IPSET_WITH_TIMEOUT

    setEntries(as: entries) → Nothing
        Permanently set list of entries to entries. For permanent operation see org.fedoraproject.FirewallD1.config.ipset.Methods.setEntries. See entry tag in firewalld.ipset(5).

Signals

    EntryAdded(s: ipset, s: entry)
        Emitted when entry has been added to ipset.

    EntryRemoved(s: ipset, s: entry)
        Emitted when entry has been removed from ipset.

  org.fedoraproject.FirewallD1.direct

DEPRECATED

    The direct interface has been deprecated. It will be removed in a future release. It is superseded by policies, see firewalld.policies(5).

This interface enables more direct access to the firewall. It enables runtime manipulation with chains and rules. For permanent configuration see org.fedoraproject.FirewallD1.config.direct interface.

Methods

    addChain(s: ipv, s: table, s: chain) → Nothing
        Add a new chain to table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Make sure there's no other chain with this name already. There already exist basic chains to use with direct methods, for example INPUT_direct chain. These chains are jumped into before chains for zones, i.e. every rule put into INPUT_direct will be checked before rules in zones. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.addChain.

        Possible errors: INVALID_IPV, INVALID_TABLE, ALREADY_ENABLED, COMMAND_FAILED

    addPassthrough(s: ipv, as: args) → Nothing
        Add a tracked passthrough rule with the arguments args for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Valid commands in args are only -A/--append, -I/--insert and -N/--new-chain. This method is (unlike passthrough method) tracked, i.e. firewalld remembers it. It's useful with org.fedoraproject.FirewallD1.Methods.runtimeToPermanent For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.addPassthrough.

        Possible errors: INVALID_IPV, ALREADY_ENABLED, COMMAND_FAILED

    addRule(s: ipv, s: table, s: chain, i: priority, as: args) → Nothing
        Add a rule with the arguments args to chain in table with priority for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). The priority is used to order rules. Priority 0 means add rule on top of the chain, with a higher priority the rule will be added further down. Rules with the same priority are on the same level and the order of these rules is not fixed and may change. If you want to make sure that a rule will be added after another one, use a low priority for the first and a higher for the following. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.addRule.

        Possible errors: INVALID_IPV, INVALID_TABLE, ALREADY_ENABLED, COMMAND_FAILED

    getAllChains() → a(sss)
        Get all chains added to all tables in format: ipv, table, chain. This concerns only chains previously added with addChain. Return value is a array of (ipv, table, chain). For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.getAllChains.

        ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

        table (s): one of filter, mangle, nat, raw, security

        chain (s): name of a chain.

    getAllPassthroughs() → a(sas)
        Get all tracked passthrough rules added in all ipv types in format: ipv, rule. This concerns only rules previously added with addPassthrough. Return value is a array of (ipv, array of arguments). For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.getAllPassthroughs.

        ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

        arguments (as): array of commands, parameters and other iptables/ip6tables/ebtables command line options.

    getAllRules() → a(sssias)
        Get all rules added to all chains in all tables in format: ipv, table, chain, priority, rule. This concerns only rules previously added with addRule. Return value is a array of (ipv, table, chain, priority, array of arguments). For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.getAllRules.

        ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

        table (s): one of filter, mangle, nat, raw, security

        chain (s): name of a chain.

        priority (i): used to order rules.

        arguments (as): array of commands, parameters and other iptables/ip6tables/ebtables command line options.

    getChains(s: ipv, s: table) → as
        Return an array of chains (s) added to table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only chains previously added with addChain. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.getChains.

        Possible errors: INVALID_IPV, INVALID_TABLE

    getPassthroughs(s: ipv) → aas
        Get tracked passthrough rules added in either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addPassthrough. Return value is a array of (array of arguments). For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.getPassthroughs.

        arguments (as): array of commands, parameters and other iptables/ip6tables/ebtables command line options.

    getRules(s: ipv, s: table, s: chain) → a(ias)
        Get all rules added to chain in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addRule. Return value is a array of (priority, array of arguments). For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.getRules.

        priority (i): used to order rules.

        arguments (as): array of commands, parameters and other iptables/ip6tables/ebtables command line options.

        Possible errors: INVALID_IPV, INVALID_TABLE

    passthrough(s: ipv, as: args) → s
        Pass a command through to the firewall. ipv can be either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). args can be all iptables, ip6tables and ebtables command line arguments. args can be all iptables, ip6tables and ebtables command line arguments. This command is untracked, which means that firewalld is not able to provide information about this command later on.

        Possible errors: COMMAND_FAILED

    queryChain(s: ipv, s: table, s: chain) → b
        Return whether a chain exists in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only chains previously added with addChain. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.queryChain.

        Possible errors: INVALID_IPV, INVALID_TABLE

    queryPassthrough(s: ipv, as: args) → b
        Return whether a tracked passthrough rule with the arguments args exists for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addPassthrough. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.queryPassthrough.

        Possible errors: INVALID_IPV

    queryRule(s: ipv, s: table, s: chain, i: priority, as: args) → b
        Return whether a rule with priority and the arguments args exists in chain in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addRule. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.queryRule.

        Possible errors: INVALID_IPV, INVALID_TABLE

    removeAllPassthroughs() → Nothing
        Remove all passthrough rules previously added with addPassthrough.

    removeChain(s: ipv, s: table, s: chain) → Nothing
        Remove a chain from table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Only chains previously added with addChain can be removed this way. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.removeChain.

        Possible errors: INVALID_IPV, INVALID_TABLE, NOT_ENABLED, COMMAND_FAILED

    removePassthrough(s: ipv, as: args) → Nothing
        Remove a tracked passthrough rule with arguments args for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Only rules previously added with addPassthrough can be removed this way. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.removePassthrough.

        Possible errors: INVALID_IPV, NOT_ENABLED, COMMAND_FAILED

    removeRule(s: ipv, s: table, s: chain, i: priority, as: args) → Nothing
        Remove a rule with priority and arguments args from chain in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Only rules previously added with addRule can be removed this way. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.removeRule.

        Possible errors: INVALID_IPV, INVALID_TABLE, NOT_ENABLED, COMMAND_FAILED

    removeRules(s: ipv, s: table, s: chain) → Nothing
        Remove all rules from chain in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addRule. For permanent operation see org.fedoraproject.FirewallD1.config.direct.Methods.removeRules.

        Possible errors: INVALID_IPV, INVALID_TABLE

Signals

    ChainAdded(s: ipv, s: table, s: chain)
        Emitted when chain has been added into table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

    ChainRemoved(s: ipv, s: table, s: chain)
        Emitted when chain has been removed from table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

    PassthroughAdded(s: ipv, as: args)
        Emitted when a tracked passthrough rule with args has been added for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

    PassthroughRemoved(s: ipv, as: args)
        Emitted when a tracked passthrough rule with args has been removed for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

    RuleAdded(s: ipv, s: table, s: chain, i: priority, as: args)
        Emitted when a rule with args has been added to chain in table with priority for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

    RuleRemoved(s: ipv, s: table, s: chain, i: priority, as: args)
        Emitted when a rule with args has been removed from chain in table with priority for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

  org.fedoraproject.FirewallD1.zone

Operations in this interface allows one to get, add, remove and query runtime zone's settings. For permanent settings see org.fedoraproject.FirewallD1.config.zone interface.

Methods

    getZoneSettings2(s: zone) → a{sv}
        Return runtime settings of given zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getSettings2. Settings are a dictionary indexed by keywords. For the type of each value see below. If the value is empty it may be omitted.

        version (s): see version attribute of zone tag in firewalld.zone(5).

        name (s): see short tag in firewalld.zone(5).

        description (s): see description tag in firewalld.zone(5).

        target (s): see target attribute of zone tag in firewalld.zone(5).

        services (as): array of service names, see service tag in firewalld.zone(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.zone(5).

        icmp_blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).

        masquerade (b): see masquerade tag in firewalld.zone(5).

        forward_ports (a(ssss)): array of (port, protocol, to-port, to-addr). See forward-port tag in firewalld.zone(5).

        interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).

        sources (as): array of source addresses. See source tag in firewalld.zone(5).

        rules_str (as): array of rich-language rules. See rule tag in firewalld.zone(5).

        protocols (as): array of protocols, see protocol tag in firewalld.zone(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.zone(5).

        icmp_block_inversion (b): see icmp-block-inversion tag in firewalld.zone(5).

        forward (b): see forward tag in firewalld.zone(5).

        ingress-priority (i): see ingress-priority tag in firewalld.zone(5).

        egress-priority (i): see egress-priority tag in firewalld.zone(5).

        Possible errors: INVALID_ZONE

    setZoneSettings2(s: zone, a{sv}: settings, i: timeout)
        Set runtime settings of given zone. For setting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.update2. Settings are a dictionary indexed by keywords. For the type of each value see below. To zero a value pass an empty string or list.

        services (as): array of service names, see service tag in firewalld.zone(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.zone(5).

        icmp_blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).

        masquerade (b): see masquerade tag in firewalld.zone(5).

        forward_ports (a(ssss)): array of (port, protocol, to-port, to-addr). See forward-port tag in firewalld.zone(5).

        interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).

        sources (as): array of source addresses. See source tag in firewalld.zone(5).

        rules_str (as): array of rich-language rules. See rule tag in firewalld.zone(5).

        protocols (as): array of protocols, see protocol tag in firewalld.zone(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.zone(5).

        icmp_block_inversion (b): see icmp-block-inversion tag in firewalld.zone(5).

        forward (b): see forward tag in firewalld.zone(5).

        Possible errors: INVALID_ZONE

    addForwardPort(s: zone, s: port, s: protocol, s: toport, s: toaddr, i: timeout) → s
        Add the IPv4 forward port into zone. If zone is empty, use default zone. The port can either be a single port number portid or a port range portid-portid. The protocol can either be tcp or udp. The destination address is a simple IP address. If timeout is non-zero, the operation will be active only for the amount of seconds. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addForwardPort.

        Returns name of zone to which the forward port was added.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL, INVALID_ADDR, INVALID_FORWARD, ALREADY_ENABLED, INVALID_COMMAND

    addIcmpBlock(s: zone, s: icmp, i: timeout) → s
        Add an ICMP block icmp into zone. The icmp is the one of the icmp types firewalld supports. To get a listing of supported icmp types use org.fedoraproject.FirewallD1.Methods.listIcmpTypes If zone is empty, use default zone. If timeout is non-zero, the operation will be active only for the amount of seconds. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addIcmpBlock.

        Returns name of zone to which the ICMP block was added.

        Possible errors: INVALID_ZONE, INVALID_ICMPTYPE, ALREADY_ENABLED, INVALID_COMMAND

    addIcmpBlockInversion(s: zone) → s
        Add ICMP block inversion to zone. If zone is empty, use default zone. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addIcmpBlockInversion.

        Returns name of zone to which the ICMP block inversion was added.

        Possible errors: INVALID_ZONE, ALREADY_ENABLED, INVALID_COMMAND

    addInterface(s: zone, s: interface) → s
        Bind interface with zone. From now on all traffic going through the interface will respect the zone's settings. If zone is empty, use default zone. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addInterface.

        Returns name of zone to which the interface was bound.

        Possible errors: INVALID_ZONE, INVALID_INTERFACE, ALREADY_ENABLED, INVALID_COMMAND

    addMasquerade(s: zone, i: timeout) → s
        Enable masquerade in zone. If zone is empty, use default zone. If timeout is non-zero, masquerading will be active for the amount of seconds. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addMasquerade.

        Returns name of zone in which the masquerade was enabled.

        Possible errors: INVALID_ZONE, ALREADY_ENABLED, INVALID_COMMAND

    addPort(s: zone, s: port, s: protocol, i: timeout) → s
        Add port into zone. If zone is empty, use default zone. The port can either be a single port number or a port range portid-portid. The protocol can either be tcp or udp. If timeout is non-zero, the operation will be active only for the amount of seconds. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addPort.

        Returns name of zone to which the port was added.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL, ALREADY_ENABLED, INVALID_COMMAND

    addProtocol(s: zone, s: protocol, i: timeout) → s
        Add protocol into zone. If zone is empty, use default zone. The protocol can be any protocol supported by the system. Please have a look at /etc/protocols for supported protocols. If timeout is non-zero, the operation will be active only for the amount of seconds. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addProtocol.

        Returns name of zone to which the protocol was added.

        Possible errors: INVALID_ZONE, INVALID_PROTOCOL, ALREADY_ENABLED, INVALID_COMMAND

    addRichRule(s: zone, s: rule, i: timeout) → s
        Add rich language rule into zone. For the rich language rule syntax, please have a look at firewalld.direct(5). If zone is empty, use default zone. If timeout is non-zero, the operation will be active only for the amount of seconds. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addRichRule.

        Returns name of zone to which the rich language rule was added.

        Possible errors: INVALID_ZONE, INVALID_RULE, ALREADY_ENABLED, INVALID_COMMAND

    addService(s: zone, s: service, i: timeout) → s
        Add service into zone. If zone is empty, use default zone. If timeout is non-zero, the operation will be active only for the amount of seconds. To get a list of supported services, use org.fedoraproject.FirewallD1.Methods.listServices. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addService.

        Returns name of zone to which the service was added.

        Possible errors: INVALID_ZONE, INVALID_SERVICE, ALREADY_ENABLED, INVALID_COMMAND

    addSource(s: zone, s: source) → s
        Bind source with zone. From now on all traffic going from this source will respect the zone's settings. A source address or address range is either an IP address or a network IP address with a mask for IPv4 or IPv6. For IPv4, the mask can be a network mask or a plain number. For IPv6 the mask is a plain number. Use of host names is not supported. If zone is empty, use default zone. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addSource.

        Returns name of zone to which the source was bound.

        Possible errors: INVALID_ZONE, INVALID_ADDR, ALREADY_ENABLED, INVALID_COMMAND

    addSourcePort(s: zone, s: port, s: protocol, i: timeout) → s
        Add source port into zone. If zone is empty, use default zone. The port can either be a single port number or a port range portid-portid. The protocol can either be tcp or udp. If timeout is non-zero, the operation will be active only for the amount of seconds. For permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.addSourcePort.

        Returns name of zone to which the port was added.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL, ALREADY_ENABLED, INVALID_COMMAND

    changeZone(s: zone, s: interface) → s
        This function is deprecated, use org.fedoraproject.FirewallD1.zone.Methods.changeZoneOfInterface instead.

    changeZoneOfInterface(s: zone, s: interface) → s
        Change a zone an interface is bound to to zone. It's basically removeInterface(interface) followed by addInterface(zone, interface). If interface has not been bound to a zone before, it behaves like addInterface. If zone is empty, use default zone.

        Returns name of zone to which the interface was bound.

        Possible errors: INVALID_ZONE, ZONE_ALREADY_SET, ZONE_CONFLICT

    changeZoneOfSource(s: zone, s: source) → s
        Change a zone an source is bound to to zone. It's basically removeSource(source) followed by addSource(zone, source). If source has not been bound to a zone before, it behaves like addSource. If zone is empty, use default zone.

        Returns name of zone to which the source was bound.

        Possible errors: INVALID_ZONE, ZONE_ALREADY_SET, ZONE_CONFLICT

    getActiveZones() → a{sa{sas}}
        Return dictionary of currently active zones altogether with interfaces and sources used in these zones. Active zones are zones, that have a binding to an interface or source.

        Return value is a dictionary where keys are zone names (s) and values are again dictionaries where keys are either 'interfaces' or 'sources' and values are arrays of interface names (s) or sources (s).

    getForwardPorts(s: zone) → aas
        Return array of IPv4 forward ports previously added into zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getForwardPorts.

        Return value is array of 4-tuples, where each 4-tuple consists of (port, protocol, to-port, to-addr). to-addr might be empty in case of local forwarding.

        Possible errors: INVALID_ZONE

    getIcmpBlocks(s: zone) → as
        Return array of ICMP type (s) blocks previously added into zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getIcmpBlocks.

        Possible errors: INVALID_ZONE

    getIcmpBlockInversion(s: zone) → b
        Return whether ICMP block inversion was previously added to zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getIcmpBlockInversion.

        Possible errors: INVALID_ZONE

    getInterfaces(s: zone) → as
        Return array of interfaces (s) previously bound with zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getInterfaces.

        Possible errors: INVALID_ZONE

    getPorts(s: zone) → aas
        Return array of ports (2-tuple of port and protocol) previously enabled in zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getPorts.

        Possible errors: INVALID_ZONE

    getProtocols(s: zone) → as
        Return array of protocols (s) previously enabled in zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getProtocols.

        Possible errors: INVALID_ZONE

    getRichRules(s: zone) → as
        Return array of rich language rules (s) previously added into zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getRichRules.

        Possible errors: INVALID_ZONE

    getServices(s: zone) → as
        Return array of services (s) previously enabled in zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getServices.

        Possible errors: INVALID_ZONE

    getSourcePorts(s: zone) → aas
        Return array of source ports (2-tuple of port and protocol) previously enabled in zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getSourcePorts.

        Possible errors: INVALID_ZONE

    getSources(s: zone) → as
        Return array of sources (s) previously bound with zone. If zone is empty, use default zone. For getting permanent settings see org.fedoraproject.FirewallD1.config.zone.Methods.getSources.

        Possible errors: INVALID_ZONE

    getZoneOfInterface(s: interface) → s
        Return name (s) of zone the interface is bound to or empty string.

    getZoneOfSource(s: source) → s
        Return name (s) of zone the source is bound to or empty string.

    getZones() → as
        Return array of names (s) of predefined zones known to current runtime environment. For list of zones known to permanent environment see org.fedoraproject.FirewallD1.config.Methods.listZones. The lists (of zones known to runtime and permanent environment) will contain same zones in most cases, but might differ for example if org.fedoraproject.FirewallD1.config.Methods.addZone has been called recently, but firewalld has not been reloaded since then.

    isImmutable(s: zone) → b
        Deprecated.

    queryForwardPort(s: zone, s: port, s: protocol, s: toport, s: toaddr) → b
        Return whether the IPv4 forward port (port, protocol, toport, toaddr) has been added into zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryForwardPort.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL, INVALID_ADDR, INVALID_FORWARD

    queryIcmpBlock(s: zone, s: icmp) → b
        Return whether an ICMP block for icmp has been added into zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryIcmpBlock.

        Possible errors: INVALID_ZONE, INVALID_ICMPTYPE

    queryIcmpBlockInversion(s: zone) → b
        Return whether ICMP block inversion has been added to zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryIcmpBlockInversion.

        Possible errors: INVALID_ZONE, INVALID_ICMPTYPE

    queryInterface(s: zone, s: interface) → b
        Query whether interface has been bound to zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryInterface.

        Possible errors: INVALID_ZONE, INVALID_INTERFACE

    queryMasquerade(s: zone) → b
        Return whether masquerading has been enabled in zone If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryMasquerade.

        Possible errors: INVALID_ZONE

    queryPort(s: zone, s: port, s: protocol) → b
        Return whether port/protocol has been added in zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryPort.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL

    queryProtocol(s: zone, s: protocol) → b
        Return whether protocol has been added in zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryProtocol.

        Possible errors: INVALID_ZONE, INVALID_PROTOCOL

    queryRichRule(s: zone, s: rule) → b
        Return whether rich rule rule has been added in zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryRichRule.

        Possible errors: INVALID_ZONE, INVALID_RULE

    queryService(s: zone, s: service) → b
        Return whether service has been added for zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.queryService.

        Possible errors: INVALID_ZONE, INVALID_SERVICE

    querySource(s: zone, s: source) → b
        Query whether sourcehas been bound to zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.querySource.

        Possible errors: INVALID_ZONE, INVALID_ADDR

    querySourcePort(s: zone, s: port, s: protocol) → b
        Return whether port/protocol has been added in zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.querySourcePort.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL

    removeForwardPort(s: zone, s: port, s: protocol, s: toport, s: toaddr) → s
        Remove IPv4 forward port ((port, protocol, toport, toaddr)) from zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeForwardPort.

        Returns name of zone from which the forward port was removed.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL, INVALID_ADDR, INVALID_FORWARD, NOT_ENABLED, INVALID_COMMAND

    removeIcmpBlock(s: zone, s: icmp) → s
        Remove ICMP block icmp from zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeIcmpBlock.

        Returns name of zone from which the ICMP block was removed.

        Possible errors: INVALID_ZONE, INVALID_ICMPTYPE, NOT_ENABLED, INVALID_COMMAND

    removeIcmpBlockInversion(s: zone) → s
        Remove ICMP block inversion from zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeIcmpBlockInversion.

        Returns name of zone from which the ICMP block inversion was removed.

        Possible errors: INVALID_ZONE, NOT_ENABLED, INVALID_COMMAND

    removeInterface(s: zone, s: interface) → s
        Remove binding of interface from zone. If zone is empty, the interface will be removed from zone it belongs to. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeInterface.

        Returns name of zone from which the interface was removed.

        Possible errors: INVALID_ZONE, INVALID_INTERFACE, NOT_ENABLED, INVALID_COMMAND

    removeMasquerade(s: zone) → s
        Disable masquerade for zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeMasquerade.

        Returns name of zone for which the masquerade was disabled.

        Possible errors: INVALID_ZONE, NOT_ENABLED, INVALID_COMMAND

    removePort(s: zone, s: port, s: protocol) → s
        Remove port/protocol from zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removePort.

        Returns name of zone from which the port was removed.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL, NOT_ENABLED, INVALID_COMMAND

    removeProtocol(s: zone, s: protocol) → s
        Remove protocol from zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeProtocol.

        Returns name of zone from which the protocol was removed.

        Possible errors: INVALID_ZONE, INVALID_PROTOCOL, NOT_ENABLED, INVALID_COMMAND

    removeRichRule(s: zone, s: rule) → s
        Remove rich language rule from zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeRichRule.

        Returns name of zone from which the rich language rule was removed.

        Possible errors: INVALID_ZONE, INVALID_RULE, NOT_ENABLED, INVALID_COMMAND

    removeService(s: zone, s: service) → s
        Remove service from zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeService.

        Returns name of zone from which the service was removed.

        Possible errors: INVALID_ZONE, INVALID_SERVICE, NOT_ENABLED, INVALID_COMMAND

    removeSource(s: zone, s: source) → s
        Remove binding of source from zone. If zone is empty, the source will be removed from zone it belongs to. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeSource.

        Returns name of zone from which the source was removed.

        Possible errors: INVALID_ZONE, INVALID_ADDR, NOT_ENABLED, INVALID_COMMAND

    removeSourcePort(s: zone, s: port, s: protocol) → s
        Remove port/protocol from zone. If zone is empty, use default zone. For permanent operation see org.fedoraproject.FirewallD1.config.zone.Methods.removeSourcePort.

        Returns name of zone from which the source port was removed.

        Possible errors: INVALID_ZONE, INVALID_PORT, MISSING_PROTOCOL, INVALID_PROTOCOL, NOT_ENABLED, INVALID_COMMAND

Signals

    ForwardPortAdded(s: zone, s: port, s: protocol, s: toport, s: toaddr, i: timeout)
        Emitted when forward port has been added to zone with timeout.

    ForwardPortRemoved(s: zone, s: port, s: protocol, s: toport, s: toaddr)
        Emitted when forward port has been removed from zone.

    IcmpBlockAdded(s: zone, s: icmp, i: timeout)
        Emitted when ICMP block for icmp has been added to zone with timeout.

    IcmpBlockInversionAdded(s: zone)
        Emitted when ICMP block inversion has been added to zone.

    IcmpBlockInversionRemoved(s: zone)
        Emitted when ICMP block inversion has been removed from zone.

    IcmpBlockRemoved(s: zone, s: icmp)
        Emitted when ICMP block for icmp has been removed from zone.

    InterfaceAdded(s: zone, s: interface)
        Emitted when interface has been added to zone.

    InterfaceRemoved(s: zone, s: interface)
        Emitted when interface has been removed from zone.

    MasqueradeAdded(s: zone, i: timeout)
        Emitted when masquerade has been enabled for zone.

    MasqueradeRemoved(s: zone)
        Emitted when masquerade has been disabled for zone.

    PortAdded(s: zone, s: port, s: protocol, i: timeout)
        Emitted when port/protocol has been added to zone with timeout.

    PortRemoved(s: zone, s: port, s: protocol)
        Emitted when port/protocol has been removed from zone.

    ProtocolAdded(s: zone, s: protocol, i: timeout)
        Emitted when protocol has been added to zone with timeout.

    ProtocolRemoved(s: zone, s: protocol)
        Emitted when protocol has been removed from zone.

    RichRuleAdded(s: zone, s: rule, i: timeout)
        Emitted when rich language rule has been added to zone with timeout.

    RichRuleRemoved(s: zone, s: rule)
        Emitted when rich language rule has been removed from zone.

    ServiceAdded(s: zone, s: service, i: timeout)
        Emitted when service has been added to zone with timeout.

    ServiceRemoved(s: zone, s: service)
        Emitted when service has been removed from zone.

    SourceAdded(s: zone, s: source)
        Emitted when source has been added to zone.

    SourcePortAdded(s: zone, s: port, s: protocol, i: timeout)
        Emitted when source-port/protocol has been added to zone with timeout.

    SourcePortRemoved(s: zone, s: port, s: protocol)
        Emitted when source-port/protocol has been removed from zone.

    SourceRemoved(s: zone, s: source)
        Emitted when source has been removed from zone.

    ZoneChanged(s: zone, s: interface)
        Deprecated

    ZoneOfInterfaceChanged(s: zone, s: interface)
        Emitted when a zone an interface is part of has been changed to zone.

    ZoneOfSourceChanged(s: zone, s: source)
        Emitted when a zone an source is part of has been changed to zone.

    ZoneUpdated2(s: zone, a{sv}: settings)
        Emitted when a zone's settings are updated via org.fedoraproject.FirewallD1.zone.Methods.setZoneSettings2

  org.fedoraproject.FirewallD1.policy

Operations in this interface allows one to get, add, remove and query runtime policy settings. For permanent settings see org.fedoraproject.FirewallD1.config.policy interface.

Methods

    getActivePolicies() → a{sa{sas}}
        Return dictionary of currently active policies altogether with ingress zones and egress zones used in these policies. Active policies are policies, that have a binding to an active ingress zone and an active egress zone.

        Return value is a dictionary where keys are policy names (s) and values are again dictionaries where keys are either 'ingress_zones' or 'egress_zones' and values are arrays of zone names (s).

    getPolicies() → as
        Return array of names (s) of predefined policies known to current runtime environment. For list of policies known to permanent environment see org.fedoraproject.FirewallD1.config.Methods.listPolicies. The lists (of policies known to runtime and permanent environment) will contain same policies in most cases, but might differ for example if org.fedoraproject.FirewallD1.config.Methods.addPolicy has been called recently, but firewalld has not been reloaded since then.

    getPolicySettings(s: policy) → a{sv}
        Return runtime settings of given policy. For getting permanent settings see org.fedoraproject.FirewallD1.config.policy.Methods.getSettings. Settings are a dictionary indexed by keywords. For possible keywords see org.fedoraproject.FirewallD1.config.Methods.addPolicy. If the value is empty it may be omitted.

        Possible errors: INVALID_POLICY

    setPolicySettings(s: policy, a{sv}: settings, i: timeout)
        Set runtime settings of given policy. For setting permanent settings see org.fedoraproject.FirewallD1.config.policy.Methods.update. Settings are a dictionary indexed by keywords. For possible keywords see org.fedoraproject.FirewallD1.config.Methods.addPolicy. To zero a value pass an empty string or list. Some keywords are not available to modify in the runtime: description, name, priority, target, version.

        Possible errors: INVALID_POLICY

Signals

    ForwardPortAdded(s: policy, a{sv}: settings)
        Emitted when a policy's settings are updated via org.fedoraproject.FirewallD1.policy.Methods.setPolicySettings

  org.fedoraproject.FirewallD1.config

Allows one to permanently add, remove and query zones, services and icmp types.

Methods

    addIPSet(s: ipset, (ssssa{ss}as): settings) → o
        Add ipset with given settings into permanent configuration. Settings are in format: version, name, description, type, dictionary of options and array of entries.

        version (s): see version attribute of ipset tag in firewalld.ipset(5).

        name (s): see short tag in firewalld.ipset(5).

        description (s): see description tag in firewalld.ipset(5).

        type (s): see type attribute of ipset tag in firewalld.ipset(5).

        options (a{ss}): dictionary of {option : value} . See options tag in firewalld.ipset(5).

        entries (as): array of entries, see entry tag in firewalld.ipset(5).

        Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE

    addIcmpType(s: icmptype, (sssas): settings) → o
        Add icmptype with given settings into permanent configuration. Settings are in format: version, name, description, array of destinations. Returns object path of the new icmp type.

        version (s): see version attribute of icmptype tag in firewalld.icmptype(5).

        name (s): see short tag in firewalld.icmptype(5).

        description (s): see description tag in firewalld.icmptype(5).

        destinations (as): array, either empty or containing strings 'ipv4' or 'ipv6', see destination tag in firewalld.icmptype(5).

        Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE

    addService(s: service, (sssa(ss)asa{ss}asa(ss)): settings) → o
        This function is deprecated, use org.fedoraproject.FirewallD1.config.Methods.addService2 instead.

    addService2s: service, a{sv}: settings) → o
        Add service with given settings into permanent configuration. Settings are a dictionary indexed by keywords. For the type of each value see below. To zero a value pass an empty string or list.

        version (s): see version attribute of service tag in firewalld.service(5).

        name (s): see short tag in firewalld.service(5).

        description (s): see description tag in firewalld.service(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.service(5).

        module names (as): array of kernel netfilter helpers, see module tag in firewalld.service(5).

        destinations (a{ss}): dictionary of {IP family : IP address} where 'IP family' key can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

        protocols (as): array of protocols, see protocol tag in firewalld.service(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.service(5).

        includes (as): array of service includes, see include tag in firewalld.service(5).

        helpers (as): array of service helpers, see helper tag in firewalld.service(5).

        Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE

    addZone(s: zone, (sssbsasa(ss)asba(ssss)asasasasa(ss)b): settings) → o
        This function is deprecated, use org.fedoraproject.FirewallD1.config.Methods.addZone2 instead.

    addZone2(s: zone, a{sv}: settings) → o
        Add zone with given settings into permanent configuration. Settings are a dictionary indexed by keywords. For the type of each value see below. To zero a value pass an empty string or list.

        version (s): see version attribute of zone tag in firewalld.zone(5).

        name (s): see short tag in firewalld.zone(5).

        description (s): see description tag in firewalld.zone(5).

        target (s): see target attribute of zone tag in firewalld.zone(5).

        services (as): array of service names, see service tag in firewalld.zone(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.zone(5).

        icmp_blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).

        masquerade (b): see masquerade tag in firewalld.zone(5).

        forward_ports (a(ssss)): array of (port, protocol, to-port, to-addr). See forward-port tag in firewalld.zone(5).

        interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).

        sources (as): array of source addresses. See source tag in firewalld.zone(5).

        rules_str (as): array of rich-language rules. See rule tag in firewalld.zone(5).

        protocols (as): array of protocols, see protocol tag in firewalld.zone(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.zone(5).

        icmp_block_inversion (b): see icmp-block-inversion tag in firewalld.zone(5).

        forward (b): see forward tag in firewalld.zone(5).

        ingress_priority (i): see ingress-priority tag in firewalld.zone(5).

        egress_priority (i): see egress-priority tag in firewalld.zone(5).

        Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE

    addPolicy(s: policy, a{sv}: settings) → o
        Add policy with given settings into permanent configuration. Settings are a dictionary indexed by keywords. For the type of each value see below. If a keyword is omitted the default value will be used.

        description (s): see description tag in firewalld.policy(5).

        egress_zones as: array of zone names. See egress-zone tag in firewalld.policy(5).

        forward_ports (a(ssss)): array of (port, protocol, to-port, to-addr). See forward-port tag in firewalld.policy(5).

        icmp_blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.policy(5).

        ingress_zones as: array of zone names. See ingress-zone tag in firewalld.policy(5).

        masquerade (b): see masquerade tag in firewalld.policy(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.policy(5).

        priority (i): see priority tag in firewalld.policy(5).

        protocols (as): array of protocols, see protocol tag in firewalld.policy(5).

        rich_rules (as): array of rich-language rules. See rule tag in firewalld.policy(5).

        services (as): array of service names, see service tag in firewalld.policy(5).

        short (s): see short tag in firewalld.policy(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.policy(5).

        target (s): see target attribute of policy tag in firewalld.policy(5).

        version (s): see version attribute of policy tag in firewalld.policy(5).

        Possible errors: NAME_CONFLICT, INVALID_NAME, INVALID_TYPE

    getHelperByName(s: helper) → o
        Return object path (permanent configuration) of helper with given name.

        Possible errors: INVALID_HELPER

    getHelperNames() → as
        Return list of helper names (permanent configuration).

    getIPSetByName(s: ipset) → o
        Return object path (permanent configuration) of ipset with given name.

        Possible errors: INVALID_IPSET

    getIPSetNames() → as
        Return list of ipset names (permanent configuration).

    getIcmpTypeByName(s: icmptype) → o
        Return object path (permanent configuration) of icmptype with given name.

        Possible errors: INVALID_ICMPTYPE

    getIcmpTypeNames() → as
        Return list of icmptype names (permanent configuration).

    getServiceByName(s: service) → o
        Return object path (permanent configuration) of service with given name.

        Possible errors: INVALID_SERVICE

    getServiceNames() → as
        Return list of service names (permanent configuration).

    getZoneByName(s: zone) → o
        Return object path (permanent configuration) of zone with given name.

        Possible errors: INVALID_ZONE

    getZoneNames() → as
        Return list of zone names (permanent configuration) of.

    getZoneOfInterface(s: iface) → s
        Return name of zone the iface is bound to or empty string.

    getZoneOfSource(s: source) → s
        Return name of zone the source is bound to or empty string.

    getPolicyByName(s: policy) → o
        Return object path (permanent configuration) of policy with given name.

        Possible errors: INVALID_POLICY

    getPolicyNames() → as
        Return list of policy names (permanent configuration).

    listHelpers() → ao
        Return array of object paths (o) of helper in permanent configuration. For runtime configuration see org.fedoraproject.FirewallD1.Methods.getHelpers.

    listIPSets() → ao
        Return array of object paths (o) of ipset in permanent configuration. For runtime configuration see org.fedoraproject.FirewallD1.ipset.Methods.getIPSets.

    listIcmpTypes() → ao
        Return array of object paths (o) of icmp types in permanent configuration. For runtime configuration see org.fedoraproject.FirewallD1.Methods.listIcmpTypes.

    listServices() → ao
        Return array of objects paths (o) of services in permanent configuration. For runtime configuration see org.fedoraproject.FirewallD1.Methods.listServices.

    listZones() → ao
        List object paths of zones known to permanent environment. For list of zones known to runtime environment see org.fedoraproject.FirewallD1.zone.Methods.getZones. The lists (of zones known to runtime and permanent environment) will contain same zones in most cases, but might differ for example if org.fedoraproject.FirewallD1.config.Methods.addZone has been called recently, but firewalld has not been reloaded since then.

    listPolicies() → ao
        List object paths of policies known to permanent environment. For list of policies known to runtime environment see org.fedoraproject.FirewallD1.policy.Methods.getPolicies. The lists (of policies known to runtime and permanent environment) will contain same policies in most cases, but might differ for example if org.fedoraproject.FirewallD1.config.Methods.addPolicy has been called recently, but firewalld has not been reloaded since then.

Signals

    HelperAdded(s: helper)
        Emitted when helper has been added.

    IPSetAdded(s: ipset)
        Emitted when ipset has been added.

    IcmpTypeAdded(s: icmptype)
        Emitted when icmptype has been added.

    ServiceAdded(s: service)
        Emitted when service has been added.

    ZoneAdded(s: zone)
        Emitted when zone has been added.

Properties

    AllowZoneDrifting - s - (rw)
        Deprecated. Getting this value always returns "no". Setting this value is ignored.

    AutomaticHelpers - s - (rw)
        Deprecated. Getting this value always returns "no". Setting this value is ignored.

    CleanupModulesOnExit - s - (rw)
        Setting this option to yes or true unloads all firewall-related kernel modules when firewalld is stopped.

    CleanupOnExit - s - (rw)
        If firewalld stops, it cleans up all firewall rules. Setting this option to no or false leaves the current firewall rules untouched.

    DefaultZone - s - (ro)
        Default zone for connections or interfaces if the zone is not selected or specified by NetworkManager, initscripts or command line tool.

    FirewallBackend - s - (rw)
        Selects the firewalld backend for all rules except the direct interface. Valid options are; nftables, iptables. Default in nftables.

        Note: The iptables backend is deprecated. It will be removed in a future release.

    FlushAllOnReload - s - (rw)
        Flush all runtime rules on a reload. Valid options are; yes, no.

    IPv6_rpfilter - b - (rw)
        Deprecated. See org.fedoraproject.FirewallD1.config.Properties.IPv6_rpfilter2.

    IPv6_rpfilter2 - s - (rw)
        Indicates whether the reverse path filter (RFE 3704) test on a packet for IPv6 is enabled.

    IndividualCalls - s - (ro)
        Indicates whether individual calls combined -restore calls are used. If enabled, this increases the time that is needed to apply changes and to start the daemon, but is good for debugging.

    LogDenied - s - (rw)
        If LogDenied is enabled, then logging rules are added right before reject and drop rules in the INPUT, FORWARD and OUTPUT chains for the default rules and also final reject and drop rules in zones. Possible values are: all, unicast, broadcast, multicast and off.

    MinimalMark - i - (rw)
        Deprecated. This option is ignored and no longer used. Marks are no longer used internally.

    RFC3964_IPv4 - s - (rw)
        As per RFC 3964, filter IPv6 traffic with 6to4 destination addresses that correspond to IPv4 addresses that should not be routed over the public internet. Valid options are; yes, no.

    StrictForwardPorts - s - (rw)
        If set to yes, the generated destination NAT (DNAT) rules will NOT accept traffic that was DNAT'd by other entities, e.g. docker. Firewalld will be strict and not allow published container ports until they're explicitly allowed via firewalld. If set to no, then docker (and podman) integrates seamlessly with firewalld. Published container ports are implicitly allowed.

    NftablesFlowtable - s - (rw)
        This may improve forwarded traffic throughput by enabling nftables flowtable. It is a software fastpath and avoids calling nftables rule evaluation for data packets. Its value is a space separate list of interfaces.

    NftablesCounters - s - (rw)
        If set to yes, add a counter to every nftables rule. This is useful for debugging and comes with a small performance cost.

    NftablesTableOwner - s - (rw)
        If set to yes, the generated nftables rule set will be owned exclusively by firewalld. This prevents other entities from mistakenly (or maliciously) modifying firewalld's rule set. If you intentionally modify firewalld's rules, then you will have to set this to "no".

  org.fedoraproject.FirewallD1.config.direct

DEPRECATED

    The direct interface has been deprecated. It will be removed in a future release. It is superseded by policies, see firewalld.policies(5).

Interface for permanent direct configuration, see also firewalld.direct(5). For runtime direct configuration see org.fedoraproject.FirewallD1.direct interface.

Methods

    addChain(s: ipv, s: table, s: chain) → Nothing
        Add a new chain to table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Make sure there's no other chain with this name already. There already exist basic chains to use with direct methods, for example INPUT_direct chain. These chains are jumped into before chains for zones, i.e. every rule put into INPUT_direct will be checked before rules in zones. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.addChain.

        Possible errors: INVALID_IPV, INVALID_TABLE, ALREADY_ENABLED

    addPassthrough(s: ipv, as: args) → Nothing
        Add a passthrough rule with the arguments args for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.addPassthrough.

        Possible errors: INVALID_IPV, ALREADY_ENABLED

    addRule(s: ipv, s: table, s: chain, i: priority, as: args) → Nothing
        Add a rule with the arguments args to chain in table with priority for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). The priority is used to order rules. Priority 0 means add rule on top of the chain, with a higher priority the rule will be added further down. Rules with the same priority are on the same level and the order of these rules is not fixed and may change. If you want to make sure that a rule will be added after another one, use a low priority for the first and a higher for the following. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.addRule.

        Possible errors: INVALID_IPV, INVALID_TABLE, ALREADY_ENABLED

    getAllChains() → a(sss)
        Get all chains added to all tables in format: ipv, table, chain. This concerns only chains previously added with addChain. Return value is a array of (ipv, table, chain). For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.getAllChains.

        ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

        table (s): one of filter, mangle, nat, raw, security

        chain (s): name of a chain.

    getAllPassthroughs() → a(sas)
        Get all passthrough rules added in all ipv types in format: ipv, rule. This concerns only rules previously added with addPassthrough. Return value is a array of (ipv, array of arguments). For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.getAllPassthroughs.

        ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

        arguments (as): array of commands, parameters and other iptables/ip6tables/ebtables command line options.

    getAllRules() → a(sssias)
        Get all rules added to all chains in all tables in format: ipv, table, chain, priority, rule. This concerns only rules previously added with addRule. Return value is a array of (ipv, table, chain, priority, array of arguments). For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.getAllRules.

        ipv (s): either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables).

        table (s): one of filter, mangle, nat, raw, security

        chain (s): name of a chain.

        priority (i): used to order rules.

        arguments (as): array of commands, parameters and other iptables/ip6tables/ebtables command line options.

    getChains(s: ipv, s: table) → as
        Return an array of chains (s) added to table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only chains previously added with addChain. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.getChains.

        Possible errors: INVALID_IPV, INVALID_TABLE

    getPassthroughs(s: ipv) → aas
        Get tracked passthrough rules added in either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addPassthrough. Return value is a array of (array of arguments). For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.getPassthroughs.

        arguments (as): array of commands, parameters and other iptables/ip6tables/ebtables command line options.

    getRules(s: ipv, s: table, s: chain) → a(ias)
        Get all rules added to chain in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addRule. Return value is a array of (priority, array of arguments). For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.getRules.

        priority (i): used to order rules.

        arguments (as): array of commands, parameters and other iptables/ip6tables/ebtables command line options.

        Possible errors: INVALID_IPV, INVALID_TABLE

    getSettings() → (a(sss)a(sssias)a(sas))
        Get settings of permanent direct configuration in format: array of chains, array of rules, array of passthroughs.

        chains (a(sss)): array of (ipv, table, chain), see 'chain' in firewalld.direct(5).
        .
                          .PP rules (a(sssias)): array of (ipv, table, chain, priority, array of arguments), see 'rule' in firewalld.direct(5).
        .
                          .PP passthroughs (a(sas)): array of (ipv, array of arguments), see passthrough in firewalld.direct(5).
        .
                        .sp

    queryChain(s: ipv, s: table, s: chain) → b
        Return whether a chain exists in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only chains previously added with addChain. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.queryChain.

        Possible errors: INVALID_IPV, INVALID_TABLE

    queryPassthrough(s: ipv, as: args) → b
        Return whether a tracked passthrough rule with the arguments args exists for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addPassthrough. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.queryPassthrough.

        Possible errors: INVALID_IPV

    queryRule(s: ipv, s: table, s: chain, i: priority, as: args) → b
        Return whether a rule with priority and the arguments args exists in chain in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addRule. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.queryRule.

        Possible errors: INVALID_IPV, INVALID_TABLE

    removeChain(s: ipv, s: table, s: chain) → Nothing
        Remove a chain from table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Only chains previously added with addChain can be removed this way. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.removeChain.

        Possible errors: INVALID_IPV, INVALID_TABLE, NOT_ENABLED

    removePassthrough(s: ipv, as: args) → Nothing
        Remove a passthrough rule with arguments args for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Only rules previously added with addPassthrough can be removed this way. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.removePassthrough.

        Possible errors: INVALID_IPV, NOT_ENABLED

    removeRule(s: ipv, s: table, s: chain, i: priority, as: args) → Nothing
        Remove a rule with priority and arguments args from chain in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). Only rules previously added with addRule can be removed this way. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.removeRule.

        Possible errors: INVALID_IPV, INVALID_TABLE, NOT_ENABLED

    removeRules(s: ipv, s: table, s: chain) → Nothing
        Remove all rules from chain in table for ipv being either ipv4 (iptables) or ipv6 (ip6tables) or eb (ebtables). This concerns only rules previously added with addRule. For runtime operation see org.fedoraproject.FirewallD1.direct.Methods.removeRules.

        Possible errors: INVALID_IPV, INVALID_TABLE

    update((a(sss)a(sssias)a(sas)): settings) → Nothing
        Update permanent direct configuration with given settings. Settings are in format: array of chains, array of rules, array of passthroughs.

        chains (a(sss)): array of (ipv, table, chain), see 'chain' in firewalld.direct(5).
        .
                          .PP rules (a(sssias)): array of (ipv, table, chain, priority, array of arguments), see 'rule' in firewalld.direct(5).
        .
                          .PP passthroughs (a(sas)): array of (ipv, array of arguments), see passthrough in firewalld.direct(5).
        .
                        .sp Possible errors: INVALID_TYPE

Signals

    Updated()
        Emitted when configuration has been updated.

  org.fedoraproject.FirewallD1.config.ipset

Interface for permanent ipset configuration, see also firewalld.ipset(5).

Methods

    addEntry(s: entry) → Nothing
        Permanently add entry to list of entries of ipset. See entry tag in firewalld.ipset(5). For runtime operation see org.fedoraproject.FirewallD1.ipset.Methods.addEntry.

        Possible errors: ALREADY_ENABLED

    addOption(s: key, s: value) → Nothing
        Permanently add (key, value) to the ipset. See option tag in firewalld.ipset(5).

        Possible errors: ALREADY_ENABLED

    getDescription() → s
        Get description of ipset. See description tag in firewalld.ipset(5).

    getEntries() → as
        Get list of entries added to ipset. See entry tag in firewalld.ipset(5). For runtime operation see org.fedoraproject.FirewallD1.ipset.Methods.getEntries.

        Possible errors: IPSET_WITH_TIMEOUT

    getOptions() → a{ss}
        Get dictionary of options set for ipset. See option tag in firewalld.ipset(5).

    getSettings() → (ssssa{ss}as)
        Return permanent settings of the ipset. For getting runtime settings see org.fedoraproject.FirewallD1.ipset.Methods.getIPSetSettings. Settings are in format: version, name, description, type, dictionary of options and array of entries.

        version (s): see version attribute of ipset tag in firewalld.ipset(5).

        name (s): see short tag in firewalld.ipset(5).

        description (s): see description tag in firewalld.ipset(5).

        type (s): see type attribute of ipset tag in firewalld.ipset(5).

        options (a{ss}): dictionary of {option : value} . See options tag in firewalld.ipset(5).

        entries (as): array of entries, see entry tag in firewalld.ipset(5).

    getShort() → s
        Get name of ipset. See short tag in firewalld.ipset(5).

    getType() → s
        Get type of ipset. See type attribute of ipset tag in firewalld.ipset(5).

    getVersion() → s
        Get version of ipset. See version attribute of ipset tag in firewalld.ipset(5).

    loadDefaults() → Nothing
        Load default settings for built-in ipset.

        Possible errors: NO_DEFAULTS

    queryEntry(s: entry) → b
        Return whether entry has been added to ipset. For runtime operation see org.fedoraproject.FirewallD1.ipset.Methods.queryEntry.

    queryOption(s: key, s: value) → b
        Return whether (key, value) has been added to options of the ipset.

    remove() → Nothing
        Remove not built-in ipset.

        Possible errors: BUILTIN_IPSET

    removeEntry(s: entry) → Nothing
        Permanently remove entry from ipset. See entry tag in firewalld.ipset(5). For runtime operation see org.fedoraproject.FirewallD1.ipset.Methods.removeEntry.

        Possible errors: NOT_ENABLED

    removeOption(s: key) → Nothing
        Permanently remove key from the ipset. See option tag in firewalld.ipset(5).

        Possible errors: NOT_ENABLED

    rename(s: name) → Nothing
        Rename not built-in ipset to name.

        Possible errors: BUILTIN_IPSET

    setDescription(s: description) → Nothing
        Permanently set description of ipset to description. See description tag in firewalld.ipset(5).

    setEntries(as: entries) → Nothing
        Permanently set list of entries to entries. See entry tag in firewalld.ipset(5).

    setOptions(a{ss}: options) → Nothing
        Permanently set dict of options to options. See option tag in firewalld.ipset(5).

    setShort(s: short) → Nothing
        Permanently set name of ipset to short. See short tag in firewalld.ipset(5).

    setType(s: ipset_type) → Nothing
        Permanently set type of ipset to ipset_type. See type attribute of ipset tag in firewalld.ipset(5).

    setVersion(s: version) → Nothing
        Permanently set version of ipset to version. See version attribute of ipset tag in firewalld.ipset(5).

    update((ssssa{ss}as): settings) → Nothing
        Update settings of ipset to settings. Settings are in format: version, name, description, type, dictionary of options and array of entries.

        version (s): see version attribute of ipset tag in firewalld.ipset(5).

        name (s): see short tag in firewalld.ipset(5).

        description (s): see description tag in firewalld.ipset(5).

        type (s): see type attribute of ipset tag in firewalld.ipset(5).

        options (a{ss}): dictionary of {option : value} . See options tag in firewalld.ipset(5).

        entries (as): array of entries, see entry tag in firewalld.ipset(5).

        Possible errors: INVALID_TYPE

Signals

    Removed(s: name)
        Emitted when ipset with name has been removed.

    Renamed(s: name)
        Emitted when ipset has been renamed to name.

    Updated(s: name)
        Emitted when ipset with name has been updated.

Properties

    builtin - b - (ro)
        True if ipset is build-in, false else.

    default - b - (ro)
        True if build-in ipset has default settings. False if it has been modified. Always False for not build-in ipsets.

    filename - s - (ro)
        Name (including .xml extension) of file where the configuration is stored.

    name - s - (ro)
        Name of ipset.

    path - s - (ro)
        Path to directory where the ipset configuration is stored. Should be either /usr/lib/firewalld/ipsets or /etc/firewalld/ipsets.

  org.fedoraproject.FirewallD1.config.zone

Interface for permanent zone configuration, see also firewalld.zone(5).

Methods

    addForwardPort(s: port, s: protocol, s: toport, s: toaddr) → Nothing
        Permanently add (port, protocol, toport, toaddr) to list of forward ports of zone. See forward-port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addForwardPort.

        Possible errors: ALREADY_ENABLED

    addIcmpBlock(s: icmptype) → Nothing
        Permanently add icmptype to list of icmp types blocked in zone. See icmp-block tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addIcmpBlock.

        Possible errors: ALREADY_ENABLED

    addIcmpBlock(s: icmptype) → Nothing
        Permanently add icmp block inversion to zone. See icmp-block-inversion tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addIcmpBlockInversion.

        Possible errors: ALREADY_ENABLED

    addInterface(s: interface) → Nothing
        Permanently add interface to list of interfaces bound to zone. See interface tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addInterface.

        Possible errors: ALREADY_ENABLED

    addMasquerade() → Nothing
        Permanently enable masquerading in zone. See masquerade tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addMasquerade.

        Possible errors: ALREADY_ENABLED

    addPort(s: port, s: protocol) → Nothing
        Permanently add (port, protocol) to list of ports of zone. See port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addPort.

        Possible errors: ALREADY_ENABLED

    addProtocol(s: protocol) → Nothing
        Permanently add protocol into zone. The protocol can be any protocol supported by the system. Please have a look at /etc/protocols for supported protocols. For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addProtocol.

        Possible errors: INVALID_PROTOCOL, ALREADY_ENABLED

    addRichRule(s: rule) → Nothing
        Permanently add rule to list of rich-language rules in zone. See rule tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addRichRule.

        Possible errors: ALREADY_ENABLED

    addService(s: service) → Nothing
        Permanently add service to list of services used in zone. See service tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addService.

        Possible errors: ALREADY_ENABLED

    addSource(s: source) → Nothing
        Permanently add source to list of source addresses bound to zone. See source tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addSource.

        Possible errors: ALREADY_ENABLED

    addSourcePort(s: port, s: protocol) → Nothing
        Permanently add (port, protocol) to list of source ports of zone. See source-port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.addSourcePort.

        Possible errors: ALREADY_ENABLED

    getDescription() → s
        Get description of zone. See description tag in firewalld.zone(5).

    getForwardPorts() → a(ssss)
        Get list of (port, protocol, toport, toaddr) defined in zone. See forward-port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getForwardPorts.

    getIcmpBlockInversion() → b
        Get icmp block inversion flag of zone. See icmp-block-inversion tag in firewalld.zone(5).

    getIcmpBlocks() → as
        Get list of icmp type names blocked in zone. See icmp-block tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getIcmpBlocks.

    getInterfaces() → as
        Get list of interfaces bound to zone. See interface tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getInterfaces.

    getMasquerade() → b
        Return whether masquerade is enabled in zone. This is the same as queryMasquerade() method. See masquerade tag in firewalld.zone(5).

    getPorts() → a(ss)
        Get list of (port, protocol) defined in zone. See port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getPorts.

    getProtocols() → as
        Return array of protocols (s) previously enabled in zone. For getting runtime settings see org.fedoraproject.FirewallD1.zone.Methods.getProtocols.

    getRichRules() → as
        Get list of rich-language rules in zone. See rule tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getRichRules.

    getServices() → as
        Get list of service names used in zone. See service tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getServices.

    getSettings() → (sssbsasa(ss)asba(ssss)asasasasa(ss)b)
        This function is deprecated, use org.fedoraproject.FirewallD1.config.zone.Methods.getSettings2 instead.

    getSettings2() → a{sv}
        Return permanent settings of given zone. For getting runtime settings see org.fedoraproject.FirewallD1.zone.Methods.getZoneSettings2. Settings are a dictionary indexed by keywords. For the type of each value see below. If the value is empty it may be omitted.

        version (s): see version attribute of zone tag in firewalld.zone(5).

        name (s): see short tag in firewalld.zone(5).

        description (s): see description tag in firewalld.zone(5).

        target (s): see target attribute of zone tag in firewalld.zone(5).

        services (as): array of service names, see service tag in firewalld.zone(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.zone(5).

        icmp_blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).

        masquerade (b): see masquerade tag in firewalld.zone(5).

        forward_ports (a(ssss)): array of (port, protocol, to-port, to-addr). See forward-port tag in firewalld.zone(5).

        interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).

        sources (as): array of source addresses. See source tag in firewalld.zone(5).

        rules_str (as): array of rich-language rules. See rule tag in firewalld.zone(5).

        protocols (as): array of protocols, see protocol tag in firewalld.zone(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.zone(5).

        icmp_block_inversion (b): see icmp-block-inversion tag in firewalld.zone(5).

        forward (b): see forward tag in firewalld.zone(5).

        ingress_priority (i): see ingress-priority tag in firewalld.zone(5).

        egress_priority (i): see egress-priority tag in firewalld.zone(5).

    getShort() → s
        Get name of zone. See short tag in firewalld.zone(5).

    getSourcePorts() → a(ss)
        Get list of (port, protocol) defined in zone. See source-port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getSourcePorts.

    getSources() → as
        Get list of source addresses bound to zone. See source tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.getSources.

    getTarget() → s
        Get target of zone. See target attribute of zone tag in firewalld.zone(5).

    getVersion() → s
        Get version of zone. See version attribute of zone tag in firewalld.zone(5).

    loadDefaults() → Nothing
        Load default settings for built-in zone.

        Possible errors: NO_DEFAULTS

    queryForwardPort(s: port, s: protocol, s: toport, s: toaddr) → b
        Return whether (port, protocol, toport, toaddr) is in list of forward ports of zone. See forward-port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryForwardPort.

    queryIcmpBlock(s: icmptype) → b
        Return whether icmptype is in list of icmp types blocked in zone. See icmp-block tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryIcmpBlock.

    queryIcmpBlockInversion() → b
        Return whether icmp block inversion is in enabled in zone. See icmp-block-inversion tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryIcmpBlockInversion.

    queryInterface(s: interface) → b
        Return whether interface is in list of interfaces bound to zone. See interface tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryInterface.

    queryMasquerade() → b
        Return whether masquerade is enabled in zone. This is the same as getMasquerade() method. See masquerade tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryMasquerade.

    queryPort(s: port, s: protocol) → b
        Return whether (port, protocol) is in list of ports of zone. See port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryPort.

    queryProtocol(s: protocol) → b
        Return whether protocol has been added in zone. For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryProtocol.

        Possible errors: INVALID_PROTOCOL

    queryRichRule(s: rule) → b
        Return whether rule is in list of rich-language rules in zone. See rule tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryRichRule.

    queryService(s: service) → b
        Return whether service is in list of services used in zone. See service tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.queryService.

    querySource(s: source) → b
        Return whether source is in list of source addresses bound to zone. See source tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.querySource.

    querySourcePort(s: port, s: protocol) → b
        Return whether (port, protocol) is in list of source ports of zone. See source-port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.querySourcePort.

    remove() → Nothing
        Remove not built-in zone.

        Possible errors: BUILTIN_ZONE

    removeForwardPort(s: port, s: protocol, s: toport, s: toaddr) → Nothing
        Permanently remove (port, protocol, toport, toaddr) from list of forward ports of zone. See forward-port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeForwardPort.

        Possible errors: NOT_ENABLED

    removeIcmpBlock(s: icmptype) → Nothing
        Permanently remove icmptype from list of icmp types blocked in zone. See icmp-block tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeIcmpBlock.

        Possible errors: NOT_ENABLED

    removeIcmpBlockInversion() → Nothing
        Permanently remove icmp block inversion from the zone. See icmp-block-inversion tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeIcmpBlockInversion.

        Possible errors: NOT_ENABLED

    removeInterface(s: interface) → Nothing
        Permanently remove interface from list of interfaces bound to zone. See interface tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeInterface.

        Possible errors: NOT_ENABLED

    removeMasquerade() → Nothing
        Permanently disable masquerading in zone. See masquerade tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeMasquerade.

        Possible errors: NOT_ENABLED

    removePort(s: port, s: protocol) → Nothing
        Permanently remove (port, protocol) from list of ports of zone. See port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removePort.

        Possible errors: NOT_ENABLED

    removeProtocol(s: protocol) → Nothing
        Permanently remove protocol from zone. For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeProtocol.

        Possible errors: INVALID_PROTOCOL, NOT_ENABLED

    removeRichRule(s: rule) → Nothing
        Permanently remove rule from list of rich-language rules in zone. See rule tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeRichRule.

        Possible errors: NOT_ENABLED

    removeService(s: service) → Nothing
        Permanently remove service from list of services used in zone. See service tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeService.

        Possible errors: NOT_ENABLED

    removeSource(s: source) → Nothing
        Permanently remove source from list of source addresses bound to zone. See source tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeSource.

        Possible errors: NOT_ENABLED

    removeSourcePort(s: port, s: protocol) → Nothing
        Permanently remove (port, protocol) from list of source ports of zone. See source-port tag in firewalld.zone(5). For runtime operation see org.fedoraproject.FirewallD1.zone.Methods.removeSourcePort.

        Possible errors: NOT_ENABLED

    rename(s: name) → Nothing
        Rename not built-in zone to name.

        Possible errors: BUILTIN_ZONE

    setDescription(s: description) → Nothing
        Permanently set description of zone to description. See description tag in firewalld.zone(5).

    setForwardPorts(a(ssss): ports) → Nothing
        Permanently set forward ports of zone to list of (port, protocol, toport, toaddr). See forward-port tag in firewalld.zone(5).

    setIcmpBlockInversion(b: flag) → Nothing
        Permanently set icmp block inversion flag of zone to flag. See icmp-block-inversion tag in firewalld.zone(5).

    setIcmpBlocks(as: icmptypes) → Nothing
        Permanently set list of icmp types blocked in zone to icmptypes. See icmp-block tag in firewalld.zone(5).

    setInterfaces(as: interfaces) → Nothing
        Permanently set list of interfaces bound to zone to interfaces. See interface tag in firewalld.zone(5).

    setMasquerade(b: masquerade) → Nothing
        Permanently set masquerading in zone to masquerade. See masquerade tag in firewalld.zone(5).

    setPorts(a(ss): ports) → Nothing
        Permanently set ports of zone to list of (port, protocol). See port tag in firewalld.zone(5).

    setProtocols(as: protocols) → Nothing
        Permanently set list of protocols used in zone to protocols. See protocol tag in firewalld.zone(5).

    setRichRules(as: rules) → Nothing
        Permanently set list of rich-language rules to rules. See rule tag in firewalld.zone(5).

    setServices(as: services) → Nothing
        Permanently set list of services used in zone to services. See service tag in firewalld.zone(5).

    setShort(s: short) → Nothing
        Permanently set name of zone to short. See short tag in firewalld.zone(5).

    setSourcePorts(a(ss): ports) → Nothing
        Permanently set source-ports of zone to list of (port, protocol). See source-port tag in firewalld.zone(5).

    setSources(as: sources) → Nothing
        Permanently set list of source addresses bound to zone to sources. See source tag in firewalld.zone(5).

    setTarget(s: target) → Nothing
        Permanently set target of zone to target. See target attribute of zone tag in firewalld.zone(5).

    setVersion(s: version) → Nothing
        Permanently set version of zone to version. See version attribute of zone tag in firewalld.zone(5).

    update((sssbsasa(ss)asba(ssss)asasasasa(ss)b): settings) → Nothing
        This function is deprecated, use org.fedoraproject.FirewallD1.config.zone.Methods.update2 instead.

    update2(a{sv}: settings) → Nothing
        Update settings of zone to settings. Settings are a dictionary indexed by keywords. For the type of each value see below. To zero a value pass an empty string or list.

        version (s): see version attribute of zone tag in firewalld.zone(5).

        name (s): see short tag in firewalld.zone(5).

        description (s): see description tag in firewalld.zone(5).

        target (s): see target attribute of zone tag in firewalld.zone(5).

        services (as): array of service names, see service tag in firewalld.zone(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.zone(5).

        icmp_blocks (as): array of icmp-blocks. See icmp-block tag in firewalld.zone(5).

        masquerade (b): see masquerade tag in firewalld.zone(5).

        forward_ports (a(ssss)): array of (port, protocol, to-port, to-addr). See forward-port tag in firewalld.zone(5).

        interfaces (as): array of interfaces. See interface tag in firewalld.zone(5).

        sources (as): array of source addresses. See source tag in firewalld.zone(5).

        rules_str (as): array of rich-language rules. See rule tag in firewalld.zone(5).

        protocols (as): array of protocols, see protocol tag in firewalld.zone(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.zone(5).

        icmp_block_inversion (b): see icmp-block-inversion tag in firewalld.zone(5).

        forward (b): see forward tag in firewalld.zone(5).

        ingress_priority (i): see ingress-priority tag in firewalld.zone(5).

        egress_priority (i): see egress-priority tag in firewalld.zone(5).

        Possible errors: INVALID_TYPE

Signals

    Removed(s: name)
        Emitted when zone with name has been removed.

    Renamed(s: name)
        Emitted when zone has been renamed to name.

    Updated(s: name)
        Emitted when zone with name has been updated.

Properties

    builtin - b - (ro)
        True if zone is build-in, false else.

    default - b - (ro)
        True if build-in zone has default settings. False if it has been modified. Always False for not build-in zones.

    filename - s - (ro)
        Name (including .xml extension) of file where the configuration is stored.

    name - s - (ro)
        Name of zone.

    path - s - (ro)
        Path to directory where the zone configuration is stored. Should be either /usr/lib/firewalld/zones or /etc/firewalld/zones.

  org.fedoraproject.FirewallD1.config.policy

Interface for permanent policy configuration, see also firewalld.policy(5).

Methods

    getSettings() → a{sv}
        Return permanent settings of given policy. For getting runtime settings see org.fedoraproject.FirewallD1.policy.Methods.getPolicySettings. Settings are a dictionary indexed by keywords. For possible keywords see org.fedoraproject.FirewallD1.config.Methods.addPolicy.

    loadDefaults() → Nothing
        Load default settings for built-in policy.

        Possible errors: NO_DEFAULTS

    remove() → Nothing
        Remove not built-in policy.

        Possible errors: BUILTIN_POLICY

    rename(s: name) → Nothing
        Rename not built-in policy to name.

        Possible errors: BUILTIN_POLICY

    update(a{sv}: settings) → Nothing
        Update settings of policy to settings. Settings are a dictionary indexed by keywords. For possible keywords see org.fedoraproject.FirewallD1.config.Methods.addPolicy. To zero a value pass an empty string or list.

        Possible errors: INVALID_TYPE

Signals

    Removed(s: name)
        Emitted when policy with name has been removed.

    Renamed(s: name)
        Emitted when policy has been renamed to name.

    Updated(s: name)
        Emitted when policy with name has been updated.

Properties

    builtin - b - (ro)
        True if policy is build-in, false else.

    default - b - (ro)
        True if build-in policy has default settings. False if it has been modified. Always False for not build-in policies.

    filename - s - (ro)
        Name (including .xml extension) of file where the configuration is stored.

    name - s - (ro)
        Name of policy.

    path - s - (ro)
        Path to directory where the policy configuration is stored. Should be either /usr/lib/firewalld/policies or /etc/firewalld/policies.

  org.fedoraproject.FirewallD1.config.service

Interface for permanent service configuration, see also firewalld.service(5).

Methods

    addModule(s: module) → Nothing
        This method is deprecated. Please use "helpers" in the update2() method.

    addPort(s: port, s: protocol) → Nothing
        Permanently add (port, protocol) to list of ports in service. See port tag in firewalld.service(5).

        Possible errors: ALREADY_ENABLED

    addProtocol(s: protocol) → Nothing
        Permanently add protocol into zone. The protocol can be any protocol supported by the system. Please have a look at /etc/protocols for supported protocols. See protocol tag in firewalld.service(5).

        Possible errors: INVALID_PROTOCOL, ALREADY_ENABLED

    addSourcePort(s: port, s: protocol) → Nothing
        Permanently add (port, protocol) to list of source ports in service. See source-port tag in firewalld.service(5).

        Possible errors: ALREADY_ENABLED

    getDescription() → s
        Get description of service. See description tag in firewalld.service(5).

    getDestination(s: family) → s
        Get destination for IP family being either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

        Possible errors: ALREADY_ENABLED

    getDestinations() → a{ss}
        Get list of destinations. Return value is a dictionary of {IP family : IP address} where 'IP family' key can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

    getModules() → as
        This method is deprecated. Please use "helpers" in the getSettings2() method.

    getPorts() → a(ss)
        Get list of (port, protocol) defined in service. See port tag in firewalld.service(5).

    getProtocols() → as
        Return array of protocols (s) defined in service. See protocol tag in firewalld.service(5).

    getSettings() → (sssa(ss)asa{ss}asa(ss))
        This function is deprecated, use org.fedoraproject.FirewallD1.config.service.Methods.getSettings2 instead.

    getSettings2(s: service) → s{sv}
        Return runtime settings of given service. For getting runtime settings see org.fedoraproject.FirewallD1.Methods.getServiceSettings2. Settings are a dictionary indexed by keywords. For the type of each value see below. If the value is empty it may be omitted.

        version (s): see version attribute of service tag in firewalld.service(5).

        name (s): see short tag in firewalld.service(5).

        description (s): see description tag in firewalld.service(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.service(5).

        module names (as): array of kernel netfilter helpers, see module tag in firewalld.service(5).

        destinations (a{ss}): dictionary of {IP family : IP address} where 'IP family' key can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

        protocols (as): array of protocols, see protocol tag in firewalld.service(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.service(5).

        includes (as): array of service includes, see include tag in firewalld.service(5).

        helpers (as): array of service helpers, see helper tag in firewalld.service(5).

    getShort() → s
        Get name of service. See short tag in firewalld.service(5).

    getSourcePorts() → a(ss)
        Get list of (port, protocol) defined in service. See source-port tag in firewalld.service(5).

    getVersion() → s
        Get version of service. See version attribute of service tag in firewalld.service(5).

    loadDefaults() → Nothing
        Load default settings for built-in service.

        Possible errors: NO_DEFAULTS

    queryDestination(s: family, s: address) → b
        Return whether a destination is in dictionary of destinations of this service. destination is in format: (IP family, IP address) where IP family can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

    queryModule(s: module) → b
        This method is deprecated. Please use "helpers" in the getSettings2() method.

    queryPort(s: port, s: protocol) → b
        Return whether (port, protocol) is in list of ports in service. See port tag in firewalld.service(5).

    queryProtocol(s: protocol) → b
        Return whether protocol is in list of protocols in service. See protocol tag in firewalld.service(5).

    querySourcePort(s: port, s: protocol) → b
        Return whether (port, protocol) is in list of source ports in service. See source-port tag in firewalld.service(5).

    remove() → Nothing
        Remove not built-in service.

        Possible errors: BUILTIN_SERVICE

    removeDestination(s: family) → Nothing
        Permanently remove a destination with family ('ipv4' or 'ipv6') from service. See destination tag in firewalld.service(5).

        Possible errors: NOT_ENABLED

    removeModule(s: module) → Nothing
        This method is deprecated. Please use "helpers" in the update2() method.

    removePort(s: port, s: protocol) → Nothing
        Permanently remove (port, protocol) from list of ports in service. See port tag in firewalld.service(5).

        Possible errors: NOT_ENABLED

    removeProtocol(s: protocol) → Nothing
        Permanently remove protocol from list of protocols in service. See protocol tag in firewalld.service(5).

        Possible errors: NOT_ENABLED

    removeSourcePort(s: port, s: protocol) → Nothing
        Permanently remove (port, protocol) from list of source ports in service. See source-port tag in firewalld.service(5).

        Possible errors: NOT_ENABLED

    rename(s: name) → Nothing
        Rename not built-in service to name.

        Possible errors: BUILTIN_SERVICE

    setDescription(s: description) → Nothing
        Permanently set description of service to description. See description tag in firewalld.service(5).

    setDestination(s: family, s: address) → Nothing
        Permanently set a destination address. destination is in format: (IP family, IP address) where IP family can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

        Possible errors: ALREADY_ENABLED

    setDestinations(a{ss}: destinations) → Nothing
        Permanently set destinations of service to destinations, which is a dictionary of {IP family : IP address} where 'IP family' key can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

    setModules(as: modules) → Nothing
        This method is deprecated. Please use "helpers" in the update2() method.

    setPorts(a(ss): ports) → Nothing
        Permanently set ports of service to list of (port, protocol). See port tag in firewalld.service(5).

    setProtocols(as: protocols) → Nothing
        Permanently set protocols of service to list of protocols. See protocol tag in firewalld.service(5).

    setShort(s: short) → Nothing
        Permanently set name of service to short. See short tag in firewalld.service(5).

    setSourcePorts(a(ss): ports) → Nothing
        Permanently set source-ports of service to list of (port, protocol). See source-port tag in firewalld.service(5).

    setVersion(s: version) → Nothing
        Permanently set version of service to version. See version attribute of service tag in firewalld.service(5).

    update((sssa(ss)asa{ss}asa(ss)): settings) → Nothing
        This function is deprecated, use org.fedoraproject.FirewallD1.config.service.Methods.update2 instead.

    update2a{sv}: settings) → Nothing
        Update settings of service to settings. Settings are a dictionary indexed by keywords. For the type of each value see below. To zero a value pass an empty string or list.

        version (s): see version attribute of service tag in firewalld.service(5).

        name (s): see short tag in firewalld.service(5).

        description (s): see description tag in firewalld.service(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.service(5).

        module names (as): array of kernel netfilter helpers, see module tag in firewalld.service(5).

        destinations (a{ss}): dictionary of {IP family : IP address} where 'IP family' key can be either 'ipv4' or 'ipv6'. See destination tag in firewalld.service(5).

        protocols (as): array of protocols, see protocol tag in firewalld.service(5).

        source_ports (a(ss)): array of port and protocol pairs. See source-port tag in firewalld.service(5).

        includes (as): array of service includes, see include tag in firewalld.service(5).

        helpers (as): array of service helpers, see helper tag in firewalld.service(5).

        Possible errors: INVALID_TYPE

Signals

    Removed(s: name)
        Emitted when service with name has been removed.

    Renamed(s: name)
        Emitted when service has been renamed to name.

    Updated(s: name)
        Emitted when service with name has been updated.

Properties

    builtin - b - (ro)
        True if service is build-in, false else.

    default - b - (ro)
        True if build-in service has default settings. False if it has been modified. Always False for not build-in services.

    filename - s - (ro)
        Name (including .xml extension) of file where the configuration is stored.

    name - s - (ro)
        Name of service.

    path - s - (ro)
        Path to directory where the configuration is stored. Should be either /usr/lib/firewalld/services or /etc/firewalld/services.

  org.fedoraproject.FirewallD1.config.helper

Interface for permanent helper configuration, see also firewalld.helper(5).

Methods

    addPort(s: port, s: protocol) → Nothing
        Permanently add (port, protocol) to list of ports in helper. See port tag in firewalld.helper(5).

        Possible errors: ALREADY_ENABLED

    getDescription() → s
        Get description of helper. See description tag in firewalld.helper(5).

    getFamily() → s
        Get family being 'ipv4', 'ipv6' or empty for both. See family tag in firewalld.helper(5).

    getModule() → s
        Get modules (netfilter kernel helpers) used in helper. See module tag in firewalld.helper(5).

    getPorts() → a(ss)
        Get list of (port, protocol) defined in helper. See port tag in firewalld.helper(5).

    getSettings() → (sssssa(ss))
        Return permanent settings of a helper. For getting runtime settings see org.fedoraproject.FirewallD1.Methods.getHelperSettings. Settings are in format: version, name, description, family, module, array of ports (port, protocol).

        version (s): see version attribute of helper tag in firewalld.helper(5).

        name (s): see short tag in firewalld.helper(5).

        description (s): see description tag in firewalld.helper(5).

        family (s): see family tag in firewalld.helper(5).

        module (s): see module tag in firewalld.helper(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.helper(5).

    getShort() → s
        Get name of helper. See short tag in firewalld.helper(5).

    getVersion() → s
        Get version of helper. See version attribute of helper tag in firewalld.helper(5).

    loadDefaults() → Nothing
        Load default settings for built-in helper.

        Possible errors: NO_DEFAULTS

    queryFamily(s: module) → b
        Return whether family is set for helper. See family tag in firewalld.helper(5).

    queryModule(s: module) → b
        Return whether module (netfilter kernel helpers) is used in helper. See module tag in firewalld.helper(5).

    queryPort(s: port, s: protocol) → b
        Return whether (port, protocol) is in list of ports in helper. See port tag in firewalld.helper(5).

    remove() → Nothing
        Remove not built-in helper.

        Possible errors: BUILTIN_HELPER

    removePort(s: port, s: protocol) → Nothing
        Permanently remove (port, protocol) from list of ports in helper. See port tag in firewalld.helper(5).

        Possible errors: NOT_ENABLED

    rename(s: name) → Nothing
        Rename not built-in helper to name.

        Possible errors: BUILTIN_HELPER

    setDescription(s: description) → Nothing
        Permanently set description of helper to description. See description tag in firewalld.helper(5).

    setFamily(s: family) → Nothing
        Permanently set family of helper to family. See family tag in firewalld.helper(5).

    setModule(s: module) → Nothing
        Permanently set module of helper to description. See module tag in firewalld.helper(5).

    setPorts(a(ss): ports) → Nothing
        Permanently set ports of helper to list of (port, protocol). See port tag in firewalld.helper(5).

    setShort(s: short) → Nothing
        Permanently set name of helper to short. See short tag in firewalld.helper(5).

    setVersion(s: version) → Nothing
        Permanently set version of helper to version. See version attribute of helper tag in firewalld.helper(5).

    update((sssssa(ss)): settings) → Nothing
        Update settings of helper to settings. Settings are in format: version, name, description, family, module and array of ports.

        version (s): see version attribute of helper tag in firewalld.helper(5).

        name (s): see short tag in firewalld.helper(5).

        description (s): see description tag in firewalld.helper(5).

        family (s): see family tag in firewalld.helper(5).

        module (s): see module tag in firewalld.helper(5).

        ports (a(ss)): array of port and protocol pairs. See port tag in firewalld.helper(5).

        Possible errors: INVALID_HELPER

Signals

    Removed(s: name)
        Emitted when helper with name has been removed.

    Renamed(s: name)
        Emitted when helper has been renamed to name.

    Updated(s: name)
        Emitted when helper with name has been updated.

Properties

    builtin - b - (ro)
        True if helper is build-in, false else.

    default - b - (ro)
        True if build-in helper has default settings. False if it has been modified. Always False for not build-in helpers.

    filename - s - (ro)
        Name (including .xml extension) of file where the configuration is stored.

    name - s - (ro)
        Name of helper.

    path - s - (ro)
        Path to directory where the configuration is stored. Should be either /usr/lib/firewalld/helpers or /etc/firewalld/helpers.

  org.fedoraproject.FirewallD1.config.icmptype

Interface for permanent icmp type configuration, see also firewalld.icmptype(5).

Methods

    addDestination(s: destination) → Nothing
        Permanently add a destination ('ipv4' or 'ipv6') to list of destinations of this icmp type. See destination tag in firewalld.icmptype(5).

        Possible errors: ALREADY_ENABLED

    getDescription() → s
        Get description of icmp type. See description tag in firewalld.icmptype(5).

    getDestinations() → as
        Get list of destinations. See destination tag in firewalld.icmptype(5).

    getSettings() → (sssas)
        Return permanent settings of icmp type. For getting runtime settings see org.fedoraproject.FirewallD1.Methods.getIcmpTypeSettings. Settings are in format: version, name, description, array of destinations.

        version (s): see version attribute of icmptype tag in firewalld.icmptype(5).

        name (s): see short tag in firewalld.icmptype(5).

        description (s): see description tag in firewalld.icmptype(5).

        destinations (as): array, either empty or containing strings 'ipv4' and/or 'ipv6', see destination tag in firewalld.icmptype(5).

    getShort() → s
        Get name of icmp type. See short tag in firewalld.icmptype(5).

    getVersion() → s
        Get version of icmp type. See version attribute of icmptype tag in firewalld.icmptype(5).

    loadDefaults() → Nothing
        Load default settings for built-in icmp type.

        Possible errors: NO_DEFAULTS

    queryDestination(s: destination) → b
        Return whether a destination ('ipv4' or 'ipv6') is in list of destinations of this icmp type. See destination tag in firewalld.icmptype(5).

    remove() → Nothing
        Remove not built-in icmp type.

        Possible errors: BUILTIN_ICMPTYPE

    removeDestination(s: destination) → Nothing
        Permanently remove a destination ('ipv4' or 'ipv6') from list of destinations of this icmp type. See destination tag in firewalld.icmptype(5).

        Possible errors: NOT_ENABLED

    rename(s: name) → Nothing
        Rename not built-in icmp type to name.

        Possible errors: BUILTIN_ICMPTYPE

    setDescription(s: description) → Nothing
        Permanently set description of icmp type to description. See description tag in firewalld.icmptype(5).

    setDestinations(as: destinations) → Nothing
        Permanently set destinations of icmp type to destinations, which is array, either empty or containing strings 'ipv4' and/or 'ipv6'. See destination tag in firewalld.icmptype(5).

    setShort(s: short) → Nothing
        Permanently set name of icmp type to short. See short tag in firewalld.icmptype(5).

    setVersion(s: version) → Nothing
        Permanently set version of icmp type to version. See version attribute of icmptype tag in firewalld.icmptype(5).

    update((sssas): settings) → Nothing
        Update permanent settings of icmp type to settings. Settings are in format: version, name, description, array of destinations.

        version (s): see version attribute of icmptype tag in firewalld.icmptype(5).

        name (s): see short tag in firewalld.icmptype(5).

        description (s): see description tag in firewalld.icmptype(5).

        destinations (as): array, either empty or containing strings 'ipv4' and/or 'ipv6', see destination tag in firewalld.icmptype(5).

Signals

    Removed(s: name)
        Emitted when icmp type with name has been removed.

    Renamed(s: name)
        Emitted when icmp type has been renamed to name.

    Updated(s: name)
        Emitted when icmp type with name has been updated.

Properties

    builtin - b - (ro)
        True if icmptype is build-in, false else.

    default - b - (ro)
        True if build-in icmp type has default settings. False if it has been modified. Always False for not build-in zones.

    filename - s - (ro)
        Name (including .xml extension) of file where the configuration is stored.

    name - s - (ro)
        Name of icmp type.

    path - s - (ro)
        Path to directory where the icmp type configuration is stored. Should be either /usr/lib/firewalld/icmptypes or /etc/firewalld/icmptypes.

SEE ALSO
firewall-applet(1), firewalld(1), firewall-cmd(1), firewall-config(1), firewalld.conf(5), firewalld.direct(5), firewalld.dbus(5), firewalld.icmptype(5), firewall-offline-cmd(1), firewalld.richlanguage(5), firewalld.service(5), firewalld.zone(5), firewalld.zones(5), firewalld.policy(5), firewalld.policies(5), firewalld.ipset(5), firewalld.helper(5)

NOTES

firewalld home page:
    http://firewalld.org

AUTHORS

Thomas Woerner <twoerner@redhat.com>
    Developer

Jiri Popelka <jpopelka@redhat.com>
    Developer

Eric Garver <eric@garver.life>
    Developer