MKFS.EROFS(1)

NAME
mkfs.erofs - tool to create an EROFS filesystem

SYNOPSIS
mkfs.erofs [OPTIONS] DESTINATION SOURCE

DESCRIPTION
EROFS is a new enhanced lightweight linux read-only filesystem with modern designs (eg. no buffer head, reduced metadata, inline xattrs/data, etc.) for scenarios which need high-performance read-only requirements, e.g. Android OS for smartphones and LIVECDs.

It also provides fixed-sized output compression support, which improves storage density, keeps relatively higher compression ratios, which is more useful to achieve high performance for embedded devices with limited memory since it has unnoticable memory overhead and page cache thrashing.

mkfs.erofs is used to create such EROFS filesystem DESTINATION image file from various SOURCE, where SOURCE can be:

    •   a local directory

    •   a (compressed) tarball

    •   an S3 bucket or a prefix within it

    •   an OCI image reference

    •   other EROFS image(s), see REBUILD MODE below

OPTIONS

-b block-size
    Set the fundamental block size of the filesystem in bytes. In other words, specify the smallest amount of data that can be accessed at a time. The default is the system page size. It cannot be less than 512 bytes.

-C max-pcluster-size
    Specify the maximum size of compress physical cluster in bytes. This may cause the big pcluster feature to be enabled (Linux 5.13+).

-m #[:compression-algorithm]
    Enable metadata compression with #-byte clusters in a metabox inode (Linux 6.17+); optionally specify a compression algorithm (defaults to data compression algorithm if omitted).

--MZ[=<0|[id]>]
    Put inode metadata ('i') and/or directory data ('d') into the separate metadata zone. This improves spatial locality of metadata layout within the image, which is beneficial for metadata access if the storage has long I/O latencies.

-x #
    Limit how many xattrs will be inlined. The default is 2.

-z compression-algorithm[,#][:...]
    Set a primary algorithm for data compression, which can be set with an optional compression level. Alternative algorithms could be specified and separated by colons. See the output of mkfs.erofs --help for a listing of the algorithms that mkfs.erofs is compiled with and what their respective level ranges are.

--zD[=<0|1>]
    Used to enable directory compression: 0=disable, 1=enable. If the optional argument is omitted, directory compression is enabled by default.

-d #
    Specify the level of debugging messages. The default is 2, which shows basic warning messages. Disables storing xattrs if < 0.

-E [^]extended-option[,...]
    Set extended options for the filesystem. Extended options are comma separated, and may take an extra argument using the equals ('=') sign. To disable a feature, usually prefix the extended option name with a caret ('^') character. The following extended options are supported:

    48bit
        Enable 48-bit block addressing and encoded extents to support larger filesystem images and byte-oriented data compression mainly for Zstandard. (Linux 6.15+)

    all-fragments
        Forcely record the whole files into a special inode for better compression and it may take an argument as the pcluster size of the packed inode in bytes. (Linux 6.1+)

    dedupe
        Enable global compressed data deduplication to minimize duplicated data in the filesystem. May further reduce image size when used with -E fragments. (Linux 6.1+)

    dot-omitted
        Omit the "." (dot) directory entry in all directories to reduce metadata overhead (Linux 6.15+). It will also enable 48bit on-disk layout.

    force-inode-compact
        Force generation of compact (32-byte) inodes.

    force-inode-extended
        Force generation of extended (64-byte) inodes.

    force-inode-blockmap
        Force generation of inode chunk format as a 4-byte block address array.

    force-chunk-indexes
        Forcely generate inode chunk format as an 8-byte chunk index (with device ID).

    [^]fragdedupe[=<inode|full>]
        Set the mode for fragment data deduplication. It's effective only when -E(all)-fragments is used together. If a caret ('^') character is set, fragment data deduplication is disabled.

        inode
            Deduplicate fragment data only when the inode data is identical. This option will result in faster image generation with the current codebase

        full
            Always deduplicate fragment data if possible

    fragments[=size]
        Pack the tail part (pcluster) of compressed files, or entire files, into a special inode for smaller image sizes, and it may take an argument as the pcluster size of the packed inode in bytes. (Linux 6.1+)

    ^inline_data
        Don't inline regular files. It's typically useful to enable FSDAX (Linux 5.15+) for those images, however, there could be other use cases too.

    legacy-compress  (obsolete; should not be used in daily use)
        Disable "compacted indexes" on-disk layout.

    nosbcrc
        Disable filesystem superblock checksum explicitly.

    plain-xattr-prefixes
        Store long extended attribute name prefixes directly on disk rather than in special inodes. By default, long xattr name prefixes are placed in metabox_inode (if metabox is enabled) or packed_inode (if fragments is enabled). This option forces them to be stored as plain on-disk structures.

    xattr-name-filter
        Enable a name filter for extended attributes to optimize negative lookups. (Linux 6.6+).

    ztailpacking
        Pack the tail part (pcluster) of compressed files into its metadata to save more space and the tail part I/O. (Linux 5.17+)

-L volume-label
    Set the volume label for the filesystem to volume-label. The maximum length of the volume label is 15 bytes.

-T #
    Specify a UNIX timestamp for image creation time for reproducible builds. If --mkfs-time is not specified, it will behave as --all-time: setting all files to the specified UNIX timestamp instead of using the modification times of the source files.

-U UUID
    Set the universally unique identifier (UUID) of the filesystem to UUID. The format of the UUID is a series of hex digits separated by hyphens, like this: "c1b9d5a2-f162-11cf-9ece-0020afc76f16". The UUID parameter may also be one of the following:

    clear
        clear the file system UUID

    random
        generate a new randomly-generated UUID

--all-root
    Make all files owned by root.

--all-time
    (used together with -T) set all files to the fixed timestamp. This is the default.

--async-queue-limit=#
    Specify the maximum number of entries in the multi-threaded job queue.

--aufs
    Replace aufs special files with overlayfs metadata.

--blobdev file
    Specify an extra blob device to store chunk-based data.

--chunksize #
    Generate chunk-based files with #-byte chunks.

--clean=MODE
    Run full clean build with the given MODE, which could be one of data, rvsp, or 0.

    If --clean is specified without an explicit value, it is treated as --clean=data.

    data: Import complete file data from the source into the destination image, creating a fully self-contained EROFS image. This mode is useful when you need a standalone image that doesn't depend on external blob devices.

    rvsp: Reserve space for file data in the destination image without copying the actual content. The file data will need to be filled in later through other means. This is useful for creating sparse images or when the actual data will be populated separately.

    0:Fill all inode data with zeros.

    The current source-specific support for MODE:

    Local directory source
        Only data is supported. rvsp and 0 will be ignored.

    Tar source (--tar)
        data and rvsp are supported. 0 will be ignored. Note that rvsp takes precedence over --tar=i or --tar=headerball.

    Rebuild mode
        Only rvsp is supported.

    S3 source (--s3)
        data and 0 are supported.

    OCI source (--oci)
        Only data is supported.

--compress-hints=file
    Apply a per-file compression strategy. Each line in file is defined by tokens separated by spaces in the following form. Optionally, instead of the given primary algorithm, alternative algorithms can be specified with algorithm-index explicitly:
    <pcluster-size-in-bytes> [algorithm-index] <match-pattern>

    match-patterns are extended regular expressions, matched against absolute paths within the output filesystem, with no leading /.

--dsunit=#
    Align all data block addresses to multiples of #.

    If --dsunit and --chunksize are both set, --dsunit will be ignored if it is larger than --chunksize.

    If --dsunit is larger, it spans multiple chunks, for example: -b 4096, --dsunit 512 (2MiB), --chunksize 4096

    Once a chunk is deduplicated, all subsequent chunks will no longer be aligned. For optimal performance, it is recommended to set --dsunit to the same value as --chunksize:

    E.g. -b 4096, --dsunit 512 (2MiB), --chunksize $((4096*512))

--exclude-path=path
    Ignore file that matches the exact literal path. You may give multiple --exclude-path options.

--exclude-regex=regex
    Ignore files that match the given extended regular expression. You may give multiple --exclude-regex options.

--file-contexts=file
    Read SELinux label configuration/overrides from file in the selinux_file(5) format.

--force-uid=UID
    Set all file UIDs to UID.

--force-gid=GID
    Set all file GIDs to GID.

--fsalignblks=#
    Specify the alignment of the primary device size (usually the filesystem size) in blocks.

--gid-offset=GIDOFFSET
    Add GIDOFFSET to all file GIDs. When this option is used together with --force-gid, the final file gids are set to GID + GID-OFFSET.

--gzinfo[=file]
    (used together with --tar) Generate AWS SOCI-compatible zinfo to support random gzip access. Source file must be a gzip-compressed tarball.

--hard-dereference
    Dereference hardlinks and add links as separate inodes.

--ignore-mtime
    Ignore the file modification time whenever it would cause mkfs.erofs to use extended inodes over compact inodes. When not using a fixed timestamp, this can reduce total metadata size. Implied by -E force-inode-compact.

--incremental=MODE
    Run an incremental build where DESTINATION is an existing EROFS image, and the data specified by SOURCE will be incrementally appended to the image. MODE has the same meaning as in --clean above. Incremental build is unsupported for --s3 and --oci sources.

    If --incremental is specified without an explicit value, it is treated as --incremental=data.

    The current source-specific support for MODE:

    Local directory source
        Only data is supported. rvsp and 0 will be ignored.

    Tar source (--tar)
        data and rvsp are supported. 0 will be ignored. Note that rvsp takes precedence over --tar=i or --tar=headerball.

    Rebuild mode
        Only rvsp is supported.

--max-extent-bytes=#
    Specify maximum decompressed extent size in bytes. The default is unlimited.

--mkfs-time
    (used together with -T) the given timestamp is only applied to the build time.

--mount-point=path
    Specify the prefix of target filesystem path (default: /).

--oci[=<f|i>]
    Generate a full (f) or index-only (i) image from OCI remote source. Additional options can be specified:

    platform=platform
        Specify the platform (default: linux/amd64).

    layer=#
        Specify the layer index to extract (0-based; omit to extract all layers).

    blob=digest
        Specify the blob digest to extract (omit to extract all layers).

    username=username
        Username for authentication (optional).

    password=password
        Password for authentication (optional).

    insecure
        Use HTTP instead of HTTPS (optional).

--offset=#
    Skip # bytes at the beginning of the image.

--ovlfs-strip[=<0|1>]
    Strip overlayfs metadata in the target image (e.g. whiteouts).

--preserve-mtime
    Use extended inodes instead of compact inodes if the file modification time would overflow compact inodes. This is the default. Overrides --ignore-mtime.

--quiet
    Quiet execution (do not write anything to standard output.)

--root-xattr-isize=#
    Ensure the inline xattr size of the root directory is # bytes at least.

--s3=endpoint
    Generate an image from S3-compatible object store. Additional options can be specified:

    passwd_file=file
        S3FS-compatible password file, with the format of "accessKey:secretKey" in the first line.

    urlstyle=style
        S3 API calling style (vhost or path) (default: vhost).

    sig=version
        S3 API signature version (2 or 4) (default: 2).

    region=code
        Region code in which endpoint belongs to (required for sig=4).

--sort=MODE
    Inode data sorting order for tarballs as input.

    MODE may be one of none or path.

    none: No particular data order is specified for the target image to avoid unnecessary overhead; Currently, it takes effect if `-E^inline_data` is specified and no compression is applied.

    path: Data order strictly follows the tree generation order. (default)

--tar, --tar=MODE
    Treat SOURCE as a tarball or tarball-like "headerball" rather than as a directory.

    MODE may be one of f, i, or headerball.

    f: Generate a full EROFS image from a regular tarball. (default)

    i: Generate a meta-only EROFS image from a regular tarball. Only metadata such as dentries, inodes, and xattrs will be added to the image, without file data. Uses for such images include as a layer in an overlay filesystem with other data-only layers.

    headerball: Generate a meta-only EROFS image from a stream identical to a tarball except that file data is not present after each file header.

--uid-offset=UIDOFFSET
    Add UIDOFFSET to all file UIDs. When this option is used together with --force-uid, the final file uids are set to UID + UIDOFFSET.

--ungzip[=file]
    Filter tarball streams through gzip. Optionally, raw streams can be dumped together.

--unxz[=file]
    Filter tarball streams through xz, lzma, or lzip. Optionally, raw streams can be dumped together.

--vmdk-desc=FILE
    Generate a VMDK descriptor file to merge sub-filesystems, which can be used for tar index or rebuild mode.

--workers=#
    Set the number of worker threads to # (default: number of CPUs).

--xattr-inode-digest=name
    Specify extended attribute name to record inode digests.

--xattr-prefix=PREFIX
    Specify a customized extended attribute namespace prefix for space saving, e.g. "trusted.overlay.". You may give multiple --xattr-prefix options (Linux 6.4+).

--zfeature-bits=#
    Toggle filesystem compression features according to given bits #. Each bit in the value corresponds to a specific compression feature:
      7 6 5 4 3 2 1 0  (bit position)
      | | | | | | | |
      | | | | | | | +-- Bit 0 (1)   : legacy-compress
      | | | | | | +---- Bit 1 (2)   : ztailpacking
      | | | | | +------ Bit 2 (4)   : fragments
      | | | | +-------- Bit 3 (8)   : all-fragments
      | | | +---------- Bit 4 (16)  : dedupe
      | | +------------ Bit 5 (32)  : fragdedupe
      | +-------------- Bit 6 (64)  : 48bit
      +---------------- Bit 7 (128) : dot-omitted

    For example, --zfeature-bits=6 (binary: 0000 0110) enables ztailpacking (bit 1) and fragments (bit 2).

-h, --help
    Display help string and exit.

-V, --version
    Print the version number and exit.

NOTES

REBUILD MODE
    Rebuild mode allows mkfs.erofs to generate a new EROFS image from one or more existing EROFS images passed as SOURCE(s). This mode is particularly useful for merging multiple EROFS images or creating index-only metadata images that reference data in the source images.

    When SOURCE contains one or more EROFS image files, mkfs.erofs automatically enters rebuild mode. The behavior is controlled by the --clean or --incremental options, which determine how file data is handled:

    Default mode (blob index)
        The generated image contains only metadata (inodes, dentries, and xattrs). File data is referenced through chunk-based indexes pointing to the original source images, which act as external blob devices. This creates a compact metadata layer suitable for layered filesystem scenarios, similar to container image layers.

    rvsp mode
        --clean=rvsp or --incremental=rvsp: Reserve space for file data without copying actual content, useful for creating sparse images.

AUTHOR
This version of mkfs.erofs is written by Li Guifu <blucerlee@gmail.com>, Miao Xie <miaoxie@huawei.com> and Gao Xiang <xiang@kernel.org> with continuously improvements from others.

This manual page was written by Gao Xiang <xiang@kernel.org>.

AVAILABILITY
mkfs.erofs is part of erofs-utils package and is available from git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git.

SEE ALSO
mkfs(8).