biosig (3.9.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream version 3.9.0
  * d/copyright: update upstream copyright year.
  * d/control: declare compliance to standards version 4.7.2.
  * d/control: build depends on python3-numpy-dev.

 -- Étienne Mollier <emollier@debian.org>  Wed, 02 Apr 2025 22:07:12 +0200

biosig (2.6.1-1) unstable; urgency=medium

  * Team upload.
  * New upstream version 2.6.1 (Closes: #1074847, #1076868).
  * d/copyright: update upstream copyright year.
  * d/control: declare compliance to standards version 4.7.0.
  * d/control: remove python3-biosig M-A: same.
    dh-python generates calls to py3compile in maintscripts, which
    produces architecture unsafe artifacts upon python3-biosig on end
    users' systems; this is flagged by lintian.

 -- Étienne Mollier <emollier@debian.org>  Mon, 05 Aug 2024 14:20:37 +0200

biosig (2.6.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream version
  * No need to preserve config.h any more

 -- Andreas Tille <tille@debian.org>  Mon, 19 Feb 2024 09:24:07 +0100

biosig (2.5.2-2) unstable; urgency=medium

  * Team upload.
  * Fix clean target
    Closes: #1043666

 -- Andreas Tille <tille@debian.org>  Tue, 06 Feb 2024 10:54:19 +0100

biosig (2.5.2-1) unstable; urgency=medium

  * Team upload.
  * New upstream version
  * Cope with missing config.status which is called in clean target

 -- Andreas Tille <tille@debian.org>  Thu, 19 Oct 2023 12:17:53 +0200

biosig (2.5.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream version (all patches applied upstream)
  * Fix watch file
  * Standards-Version: 4.6.2 (routine-update)

 -- Andreas Tille <tille@debian.org>  Thu, 05 Jan 2023 08:15:48 +0100

biosig (2.4.0-2) unstable; urgency=medium

  * Team upload.
  * Add arch.patch: fix baseline violation and ftbfs. (Closes: #1012416)
  * Standards-Version: 4.6.1 (routine-update)

 -- Étienne Mollier <emollier@debian.org>  Mon, 06 Jun 2022 22:21:51 +0200

biosig (2.4.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream version
  * Make sure package builds with dcmtk 3.6.7
    Closes: #1010545

 -- Andreas Tille <tille@debian.org>  Thu, 12 May 2022 08:46:25 +0200

biosig (2.3.3-1) unstable; urgency=medium

  [ Alois Schlögl ]
  * libbiosig:
  - improved support for the following data formats:
    EDF+ : relax requirement that reserved field must start with "EDF+"
    ABF2 : check scaling - seems good
    ATF  : support multi-channel traces, segments will be concatanated
           (and not considered different channels)
    AXG  : extend support to some real-world data sets

  * biosig4matlab
  - add Machine-Learning-Optimal-Detection (MOD) method (Zhang et al. 2020,2021)
    including demo script
  - <NEW> rotary-decoder added (used in Zhang et al. 2020)
    biosig4matlab/t250_ArtifactPreProcessingQualityControl/rotary_decoder.m
  - sopen (gdf): add support for timezone information
  - fix issue eeglab#93 (encoding of EDF+ annotations)

  [ Andreas Tille ]
  * Standards-Version: 4.6.0 (routine-update)

 -- Alois Schlögl <alois.schloegl@gmail.com>  Sat, 02 Oct 2021 15:32:14 +0200

biosig (2.1.2-4) unstable; urgency=medium

  * libbiosig: cherry pick some patches from upstream
    - fix EDF-to-GDF conversion for certain files
    - fix JSON export when SampleRate is undefined (e.g. Infinity)

 -- Alois Schlögl <alois.schloegl@gmail.com>  Thu, 15 Apr 2021 21:04:32 +0200

biosig (2.1.2-3) unstable; urgency=medium

  [ Alois Schlögl ]
  * octave-biosig:
  - bug fix: EDF+ event import (eeglab issue #93)
  - GDF files: support reading and writing of timezone information

 -- Alois Schlögl <alois.schloegl@gmail.com>  Tue, 26 Jan 2021 22:47:42 +0200

biosig (2.1.2-2) unstable; urgency=medium

  * Team upload.
  * debian/tests/control:
    - Rename command1 to octave-ext-prints-usage
    - Fix test failure with allow-stderr
    - Try to avoid octave's X11 warnings
  * Update merge request information in debian/patches
  * debian/watch: version=4

 -- Juhani Numminen <juhaninumminen0@gmail.com>  Sat, 16 Jan 2021 14:07:42 +0200

biosig (2.1.2-1) unstable; urgency=medium

  * Team upload.

  [ Alois Schlögl ]
  * update to upstream version 2.1.2
  * build biosig4python for all supported python versions
  * add biosig2gdf (which is required and useful for loadgdf{py,r})

  [ Juhani Numminen ]
  * debian/rules:
    - Replace explicit dh_numpy3 and dh_octave* by "dh --with"
    - Don't run the configure step twice and remove commented code
    - Build python packages by executing pybuild commands
    - Permissions fixing is now done by a patch
  * Create d/octave-biosig.install to replace installation code in d/rules
  * Create d/clean to replace cleaning code in d/rules
  * Document non-installed files in d/not-installed and let dh_missing fail if
    unknown files appear
  * New patches:
    - submake.patch: avoid "warning: jobserver unavailable"
    - cppflags_ldflags.patch: apply LDFLAGS and CPPFLAGS
    - delete_extra_dpkg_buildflags.patch: eliminate a potential source of
      packager confusion
    - disable_python_rule.patch: only use debian/rules to build python extension
    - clean_biosig2gdf.patch: add biosig2gdf executable to cleaned files
    - install_permissions.patch: give non-exec permissions to a *.pc file
    - install_strip.patch: do not strip debug symbols from the shared library
  * Use autopkgtest-pkg-python to check that the python module exists
  * Add superficial autopkgtest: octave --eval mexSLOAD
  * debian/control:
    - Add ${devlibs:Depends} to libbiosig-dev Depends
    - Fix typo in homepage
    - Standards-Version: 4.5.1
  * Trim trailing whitespace in debian/changelog

 -- Juhani Numminen <juhaninumminen0@gmail.com>  Thu, 14 Jan 2021 17:09:54 +0200

biosig (2.1.0-1) unstable; urgency=medium

  * Adapt Vcs fields on Salsa to new source package name
  * Build-Depends: python3-setuptools
  * Closes: #972684, #973435
  * adapt config.status file

 -- Alois Schlögl <alois.schloegl@gmail.com>  Thu, 12 Nov 2020 23:17:41 +0200

biosig (2.0.6-1) unstable; urgency=medium

  [ Alois Schlögl ]
  * Fix Build-Depends
  * Fix Homepage
  * Fix watch file
  * add "Biosig for Octave and Matlab" and rename
    debian source package from "biosig4c++" to "biosig"
  * "Biosig for Octave and Matlab" is added to octave-biosig package
  * push SONAMEVERSION (provides libbiosig3 instead of libbiosig2)
  * fix configure for tinyxml
  * update to new upstream (v2.0.6,
    commit b605b38417630f4a5ee2fa7dcc886164041295da + some more changes)

  [ Andreas Tille ]
  * debhelper-compat 13 (routine-update)
  * Add salsa-ci file (routine-update)
  * Rules-Requires-Root: no (routine-update)
  * Add Alois Schlögl to Uploaders
  * Fix installation of manpages
  * Reviewed debian/copyright

 -- Alois Schlögl <alois.schloegl@gmail.com>  Mon, 24 Aug 2020 01:07:41 +0200

biosig4c++ (1.9.5-2) UNRELEASED; urgency=medium

  * Build-Depends: python3-all-dev to cope with piuparts issue

 -- Andreas Tille <tille@debian.org>  Tue, 03 Mar 2020 09:07:32 +0100

biosig4c++ (1.9.5-1) unstable; urgency=medium

  [ Yaroslav Halchenko ]
  * Fresh upstream release
  * debian/patches
    - dropped patches/fix_soname.patch -- upstreamed
  * debian/control
    - added libtinyxml-dev to build-depends

  [ Andreas Tille ]
  * Take over package into Debian Med team maintenance
  * debian/gbp.conf: deleted since converted to default layout
  * Provide symbols file only for architectures where it can be used
    unchanged
  * Add Build-Depends: libdcmtk-dev, libxml2-dev, libb64-dev
    as upstream suggests
  * debhelper-compat 12
  * Standards-Version: 4.5.0
  * Secure URI in copyright format
  * Respect DEB_BUILD_OPTIONS in override_dh_auto_test target
  * Remove trailing whitespace in debian/changelog
  * Remove trailing whitespace in debian/rules
  * Use secure URI in debian/watch.
  * Remove empty debian/patches/series.
  * Set upstream metadata fields: Archive, Repository.
  * Drop Python2 support (some refinements for Python3 only
    Closes: #936207
  * Refresh symbols file
    Closes: #925643
  * Fix permissions
  * Drop unused lintian-overrides

 -- Andreas Tille <tille@debian.org>  Mon, 02 Mar 2020 08:32:47 +0100

# Older entries have been removed from this changelog.
# To read the complete changelog use `apt changelog libbiosig3`.
