Network UPS Tools - Quick Start for Debian
------------------------------------------

Anyway, here are the quick start instructions for using nut:

These Quick Start instructions are useful for a UPS connected to a single
machine.  For a UPS connected to multiple machines, additional steps must be
taken, as outlined at the end of this file, including the notice regarding
SECURITY CONSIDERATIONS.

(I) Upgrading
=============

In case of upgrading, follow instructions given in:
/usr/share/doc/nut/UPGRADING.gz

Note that service(s) (driver(s), upsd, upsmon) are not restarted upon
upgrade, to avoid service disruption. You have to manually do it.

(II) Installation
=================

Configuration files are located in /etc/nut/
In order to tune NUT configuration according to your needs, follow the below
information, along with the one provided inside these files.

(1) /etc/nut/nut.conf (see 'man 5 nut.conf' for more information)
    Edit /etc/nut/nut.conf and modify the "MODE" variable according to your
    configuration.

    You can also fine tune the daemons options through UPSD_OPTIONS and
    UPSMON_OPTIONS.

The steps 2 to 5 are only required if you use a "standalone" or "netserver"
MODE. If you are running in "netclient" MODE, jump directly to section 6.

(2) /etc/nut/ups.conf (see 'man 5 ups.conf' for more information)
    
    Edit /etc/nut/ups.conf and add something like:
      [myups]
        driver = usbhid-ups
        port = auto
    Use the appropriate driver for your UPS and select the correct port.
    To select the driver, take a look at the UPS compatibility list:
    /usr/share/nut/driver.list

    If you have more than one UPS, add as many entries as needed.

    If you wish to test manually whether your configuration of ups.conf is
    correct, you may invoke upsdrvctl by hand (as root):
      /sbin/upsdrvctl start [myups]
      /sbin/upsdrvctl stop [myups]

    Ensure that the permissions of ups.conf do not permit the world to
    read it.  It should already be thus, but the following command
    accomplishes this:
      chown root:nut /etc/nut/ups.conf
      chmod 640 /etc/nut/ups.conf

(3) device port permissions
    The nut user need to be able to access the device port both for reading and
    writing.

    For serial devices, there are two possibilities:

    a) You can add the nut user to the dialout group.
       The following command accomplishes this:
         addgroup nut dialout

       This is not done by default for security reason on Debian, but is applied
       on Ubuntu.

    b) Another solution, for system supporting udev, is to create a file,
       For example /etc/udev/rules.d/92-nut-serialups.rules. It will
       be used after /lib/udev/rules.d/91-permissions.rules, and
       contains something like:

         KERNEL=="ttyS1", GROUP="nut"

       where 'ttyS1' has to be replaced by the exact name of your serial port.

    For USB devices, permissions are automatically set by the
    /lib/udev/rules.d/52-nut-usbups.rules udev rules file.

(4) /etc/nut/upsd.conf (see 'man 5 upsd.conf' for more information)
    the default /etc/nut/upsd.conf is fine for a "standalone" configuration.
    If you are in "netserver" MODE, you will have to modify the LISTEN option
    to something suitable.

    Ensure that the permissions of upsd.conf do not permit the world to
    read it.  It should already be thus, but the following command
    accomplishes this:
      chown root:nut /etc/nut/upsd.conf
      chmod 640 /etc/nut/upsd.conf

(5) /etc/nut/upsd.users (see 'man 5 upsd.users' for more information)
    Edit /etc/nut/upsd.users and add something like the following,
    without the comments, in order to define a user:
      [monmaster]
        password = blah
        upsmon master
    Please use *different* usernames and passwords than you use on your
    system; see the note regarding SECURITY CONSIDERATIONS at the end
    of this file.

    Ensure that the permissions of upsd.users do not permit the world to
    read it.  It should already be thus, but the following command
    accomplishes this:
      chown root:nut /etc/nut/upsd.users
      chmod 640 /etc/nut/upsd.users

(6) /etc/nut/upsmon.conf (see 'man 5 upsmon.conf' for more information)
    Edit /etc/nut/upsmon.conf and add something like the following:
      MONITOR myups@localhost 1 monmaster blah master
      POWERDOWNFLAG /etc/killpower
      SHUTDOWNCMD "/sbin/shutdown -h +0"

    Ensure that the permissions of upsmon.conf do not permit the world to
    read it.  It should already be thus, but the following commands
    accomplishes this:
      chown root:nut /etc/nut/upsmon.conf
      chmod 640 /etc/nut/upsmon.conf

(7) /etc/default/nut
    This file is not used anymore.
    nut.conf provides all the needed features to replace this file.

(8) start the daemon
    If you use a "standalone" or "netserver" MODE, invoke:
    - '/etc/init.d/nut-server start' to start upsd and appropriate driver(s),
    - '/etc/init.d/nut-client start' to start upsmon.

    If you are running in "netclient" MODE, invoke:
    - '/etc/init.d/nut-client start' to start upsmon.

    Check /var/log/syslog to ensure that daemon(s) started up correctly.


Additional Notes for Sharing a UPS
----------------------------------
If you have multiple machines connected to the same UPS, you will need to
(a) modify the access control lists in upsd.conf on the server;
(b) add additional users to upsd.users on the server; and
(c) configure upsmon.conf on the clients.

Please note that upsmon on a client machine and upsd on a server machine need
to communicate via your network.  This means that you need to ensure that all
the networking equipment (hub, switch, router, etc.) between the client and the
server is powered by the UPS.  Otherwise, when the power goes down, the network
connection between the client machine will be broken and the client will not
be told to shut down.

SECURITY CONSIDERATIONS
-----------------------
Finally, please be aware of the following SECURITY CONSIDERATIONS:  the TCP
communications between the client daemon, upsmon, and the server daemon, upsd,
send the username and passwords defined in upsd.users and used in upsmon.conf
over the wire UNENCRYPTED.  This means that somebody could sniff the username
and password.  A version that encrypts the connection using SSL should be
available someday.

Please see the documentation in /usr/share/doc/nut/docs for more information.
