Contents

# Connectors

कनेक्टर्स

Open the Connectors toolbar, where you can add connectors to objects in the current slide. A connector is a line that joins objects, and remains attached when the objects are moved. If you copy an object with a connector, the connector is also copied.

तीन या चार क़िस्म की कनेक्टर लाइनें:

1. मानक (90 डिग्री कोण मोड़)

2. लकीर (दो मोड़)

3. सीधा

4. वक्रीय

When you click a connector and move your mouse pointer over a filled object, or the edge of an unfilled object, gluepoints appear. A gluepoint is a fixed point where you can attach a connector line. You can add custom gluepoints to an object.

To draw a connector line, click a gluepoint on an object, drag to a gluepoint on another object, and then release. You can also drag to an empty part of you document and click. The unattached end of the connector is locked in place, until you drag the end to a different location. To detach a connector, drag either end of the connector line to a different location.

## कनेक्टर्स

Draws a connector with one or more 90-degree angle bends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर्स

## कनेक्टर तीर से समाप्त होते हैं

Draws a connector with one or more 90-degree angle bends and an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर तीर से समाप्त होते हैं

## कनेक्टर तीर से समाप्त होते हैं

Draws a connector with one or more 90-degree angle bends and an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर तीर से समाप्त होते हैं

## कनेक्टर तीर से समाप्त होते हैं

Draws a connector with one or more 90-degree angle bends and arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर तीर से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a connector with one or more 90-degree angle bends and a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर वृत्त से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a connector with one or more 90-degree angle bends and a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर वृत्त से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a connector with one or more 90-degree angle bends and circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर वृत्त से समाप्त होते हैं

## Line Connector

Draws a connector that bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Line Connector

## सीधा कनेक्टर तीर से प्रारंभ होते हैं

Draws a connector that starts with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

सीधा कनेक्टर तीर से प्रारंभ होते हैं

## कनेक्टर तीर से समाप्त होते हैं

Draws a connector that ends with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

कनेक्टर तीर से समाप्त होते हैं

## कनेक्टर तीर से समाप्त होते हैं

Draws a connector that bends near a gluepoint and has arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

कनेक्टर तीर से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a connector that starts with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

कनेक्टर वृत्त से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a connector that ends with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

कनेक्टर वृत्त से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a connector that bends near a gluepoint and has circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

कनेक्टर वृत्त से समाप्त होते हैं

## Straight Connector

Draws a straight line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Straight Connector

## सीधा कनेक्टर तीर से प्रारंभ होते हैं

Draws a straight line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

सीधा कनेक्टर तीर से प्रारंभ होते हैं

## सीधा कनेक्टर तीर से प्रारंभ होते हैं

Draws a straight line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

सीधा कनेक्टर तीर से प्रारंभ होते हैं

## सीधा कनेक्टर तीर से प्रारंभ होते हैं

Draws a straight line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

सीधा कनेक्टर तीर से प्रारंभ होते हैं

## सीधा कनेक्टर तीर से प्रारंभ होते हैं

Draws a straight line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

सीधा कनेक्टर तीर से प्रारंभ होते हैं

## सीधा कनेक्टर तीर से प्रारंभ होते हैं

Draws a straight line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

सीधा कनेक्टर तीर से प्रारंभ होते हैं

## सीधा कनेक्टर तीर से प्रारंभ होते हैं

Draws a straight line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

सीधा कनेक्टर तीर से प्रारंभ होते हैं

## Curved Connector

Draws a curved line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Curved Connector

## सीधा कनेक्टर तीर से प्रारंभ होते हैं

Draws a curved line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

सीधा कनेक्टर तीर से प्रारंभ होते हैं

## कनेक्टर तीर से समाप्त होते हैं

Draws a curved line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर तीर से समाप्त होते हैं

## कनेक्टर तीर से समाप्त होते हैं

Draws a curved line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर तीर से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a curved line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर वृत्त से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a curved line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर वृत्त से समाप्त होते हैं

## कनेक्टर वृत्त से समाप्त होते हैं

Draws a curved line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

कनेक्टर वृत्त से समाप्त होते हैं

Related Topics

Creating a Flowchart

Please support us!