# &appname; Manual

&appname; Project

&appname; is the GNOME Partition Editor for creating, reorganizing, and deleting disk partitions. &appname; enables you to change the partition organization while preserving the partition contents.

2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Curtis Gedak
2014, 2015, 2017, 2018, 2023
Mike Fleetwood

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy of the GFDL at this link or at or in the file COPYING-DOCS distributed with this manual.

Curtis
Gedak
&appname; Project

                gedakc@users.sf.net

Mike
Fleetwood
&appname; Project

                mike.fleetwood@googlemail.com

&appname; Manual V1.13
September 2023

Mike Fleetwood

&appname; Project

Describes version 1.6.0 of &appname;

&appname; Manual V1.12
May 2018

Mike Fleetwood

&appname; Project

Describes version 0.31.0 of &appname;

&appname; Manual V1.11
September 2017

Curtis Gedak & Mike Fleetwood

&appname; Project

Describes version 0.29.0 of &appname;

&appname; Manual V1.10
January 2017

Curtis Gedak & Mike Fleetwood

&appname; Project

Describes version 0.28.0 of &appname;

&appname; Manual V1.9
March 2015

Curtis Gedak & Mike Fleetwood

&appname; Project

Describes version 0.22.0 of &appname;

&appname; Manual V1.8
September 2014

Curtis Gedak

&appname; Project

Describes version 0.20.0 of &appname;

&appname; Manual V1.7
February 2014

Curtis Gedak

&appname; Project

Describes version 0.18.0 of &appname;

&appname; Manual V1.6
December 2013

Curtis Gedak

&appname; Project

Describes version 0.17.0 of &appname;

&appname; Manual V1.5
September 2013

Curtis Gedak

&appname; Project

Describes version 0.16.2 of &appname;

&appname; Manual V1.4
February 2012

Curtis Gedak

&appname; Project

Describes version 0.12.0 of &appname;

&appname; Manual V1.3
January 2011

Curtis Gedak

&appname; Project

Describes version 0.8.0 of &appname;

&appname; Manual V1.2
June 2010

Curtis Gedak

&appname; Project

Describes version 0.6.0 of &appname;

&appname; Manual V1.1
July 2009

Curtis Gedak

&appname; Project

Describes version 0.4.6 of &appname;

&appname; Manual V1.0
January 2009

Curtis Gedak

&appname; Project

Describes version 0.4.2 of &appname;

&appname; Manual V0.3.9
September 2008

Curtis Gedak

&appname; Project

Describes version 0.3.9 of &appname;

This manual describes version &appversion; of &appname;

## Feedback

To report a bug or make a suggestion regarding the &app; application or this manual, follow the directions at .

## Introduction

The &app; application is the GNOME Partition Editor for creating, reorganizing, and deleting disk partitions.

A disk device can be subdivided into one or more partitions. The &app; application enables you to change the partition organization on a disk device while preserving the contents of the partition.

With &app; you can accomplish the following tasks:

- Create a partition table on a disk device.

- Enable and disable partition flags such as boot and hidden.

- Perform actions with partitions such as create, delete, resize, move, check, label, copy, and paste.

Editing partitions has the potential to cause LOSS of DATA.

The &app; application is designed to enable you to edit partitions while reducing the risk of data loss. The application is carefully tested and is used by the &appname; project team. However, loss of data might occur due to software bugs, hardware problems, or power failure.

You can help to reduce the risk of data loss by not mounting or unmounting partitions outside of the &app; application while &app; is running.

You are advised to BACKUP your DATA before using the &app; application. This is especially true for encrypted data where all of the data can become permanently inaccessible after a failure. Please refer to The Cryptsetup FAQ for backup and recovery advice of encrypted data.

## Getting Started

### Starting &app;

You can start &app; in the following ways:

Applications menu

  Choose System Tools GParted Partition Editor.

Command line

  Execute the following command: `&app;`

On startup, &app; will scan your computer for disk devices.

### The &app; Window

When you start &app;, the following window is displayed:

#### &app; Window

Shows &app; main window.

The &app; window contains the following elements:

Menubar

  The menus on the menubar contain all of the commands you need to work with disk devices and partitions in &app;.

Toolbar

  The toolbar contains a subset of the commands that you can access from the menubar.

Graphic Display Area

  The graphic display area contains the visual representation of the partitions on the selected disk device.

Text Display Area

  The text display area contains the text list of the partitions on the selected disk device.

Statusbar

  The statusbar displays information about current &app; activity or the number of operations pending.

Device Information Pane

  The device information pane displays details about the selected disk device.

  By default the device information pane is not shown. To show the device information pane, choose View Device Information.

Pending Operations Pane

  The pending operations pane displays the current list of partition operations in the queue.

  By default the pending operations pane is not shown when there are 0 pending operations. To show the pending operations pane, choose View Pending Operations.

When you left-click in either display area, you select a partition to use for partition editing actions.

When you right-click in either display area, the application displays a popup menu. The popup menu contains the most common partition editing actions.

Like other GNOME applications, actions in &app; can be performed in several ways: with the menu, with the toolbar, or with shortcut keys.

### Running &app; from a Command Line

You can run &app; from a command line and specify one or more disk devices.

To work with multiple disk devices from a command line, type the following command, then press Enter:

    $ &app; /path-to-your-device1 /path-to-your-device2

## Viewing File System Support

To view the actions supported on file systems, choose: View File System Support. The application displays the File System Support dialog.

If you have installed software while &app; is running, click Rescan For Supported Actions to refresh the chart. The application refreshes the display of the chart.

To close the File System Support dialog, click Close.

## Working with Devices

### Selecting a Device

To select a disk device, choose: GParted Devices and select a device from the list. The application displays the device partition layout in the &app; window.

### Viewing Device Information

To view information about a disk device:

1. Select a disk device. See .

2. Select: View Device Information. The application opens a side pane in the &app; window and displays information about the device.

To close the Device Information side pane, deselect: View Device Information.

### Refreshing All Devices

To refresh all disk devices, choose: GParted Refresh Devices. The application rescans all the disk devices and refreshes the device partition layout in the &app; window.

### Creating a New Partition Table

To create a new partition table on a disk device:

1. Select a disk device. See .

2. Choose: Device Create Partition Table. The application displays a Create partition table on /path-to-device dialog.

3. Optionally select a different partition table type from the list.

   The default partition table type is msdos for disks smaller than 2 Tebibytes in size (assuming a 512 byte sector size) and gpt for disks 2 Tebibytes and larger.

   See for msdos partition table limitations.

   To use a disk without a partition table, choose loop to create a virtual partition that spans the disk. Then format to the desired file system.

   See to format a virtual partition with a file system.

   Many operating systems recognize gpt and msdos partition tables, but do not recognize all types of file systems. This lack of file system recognition means that using a disk without a partition table involves more risk. For example, some operating systems might prompt to format an unpartitioned disk if the file system is not recognized.

4. Click Apply to create the new partition table. The application writes the new partition table to the disk device. The application refreshes the device partition layout in the &app; window.

WARNING: This will ERASE ALL DATA on the ENTIRE DISK DEVICE.

If you accidentally overwrite your partition table, see .

## Working with Partitions

### Basic Partition Actions

These actions will not alter partitions on your disk device.

#### Selecting a Partition

To select a partition, use one of the following:

- Click on a partition in the graphic display area.

- Click on a partition in the text display area.

The application highlights the partition in both the graphic display area and the text display area in the &app; window.

Partition operations such as delete, move, copy, format, check, label, and often resize require the partition to be unmounted. See .

#### Selecting Unallocated Space

To select unallocated space, use one of the following:

- Click on unallocated in the graphic display area.

- Click on unallocated in the text display area.

The application highlights the unallocated space in both the graphic display area and the text display area in the &app; window.

If you do not have any disk devices with unallocated space, you might try the following:

- Add a new disk device to your computer.

- Shrink a partition that contains unused space. See .

#### Viewing Partition Information

To view information about a partition:

1. Select a partition. See .

2. Choose: Partition Information. The application opens an Information about /path-to-partition dialog.

To close the Information about /path-to-partition dialog, click Close.

#### Mounting a Partition

To mount a partition:

1. Select an unmounted partition. See .

2. Choose: Partition Mount and select a mount point from the list. The application mounts the partition on the mount point and refreshes the device partition layout in the &app; window.

If Partition Mount is not visible, then &app; does not know where the partition should be mounted.

#### Unmounting a Partition

To unmount a partition:

1. Select a mounted partition. See .

2. Choose: Partition Unmount. The application unmounts the partition from the mount point and refreshes the device partition layout in the &app; window.

If Partition Unmount does not succeed, then the partition is probably in use.

To have all partitions unmounted and available for partition editing actions, boot from a Live CD and use &app;. See

#### Opening an Encrypted Partition

To open a LUKS encrypted partition:

1. Select a closed LUKS encrypted partition. See .

2. Choose: Partition Open Encryption.

   If &app; doesn't yet know the LUKS Passphrase it will open a LUKS Passphrase /path-to-partition dialog. Type the LUKS Passphrase into the Passphrase text box and click Unlock.

   The application opens the encrypted partition and refreshes the device partition layout in the &app; window.

&app; remembers each LUKS Passphrase in the computer's memory for as long as it is running. This is so that it doesn't have to prompt when reopening the same encrypted partition again. When &app; is closed all remembered LUKS Passphrases are cleared from memory and forgotten.

#### Closing an Encrypted Partition

To close a LUKS encrypted partition:

1. Select an unmounted and LUKS encrypted partition. See .

2. Choose: Partition Close Encryption. The application closes the LUKS encryption and refreshes the device partition layout in the &app; window.

### Intermediate Partition Actions

These actions will alter partitions on your disk device. These actions will not modify the start or end boundaries of your existing partitions.

#### Creating a New Partition

To create a new partition:

1. Select an unallocated space on the disk device. See .

2. Choose: Partition New. The application displays the Create new Partition dialog.

3. Specify the size and the location for the partition. See .

4. Specify the alignment for the partition. See .

5. Specify the type of partition. See .

6. Specify the name of the partition when the field is enabled. See .

7. Specify the type of file system for the partition. See .

8. Specify the label of the file system for the partition. See .

9. Click Add to add the create partition operation to the operation queue. The application displays the create partition operation in the Pending Operations pane in the &app; window.

#### Deleting a Partition

To delete a partition:

1. Select an unmounted partition. See .

2. Choose: Partition Delete. The application displays the delete partition operation in the Pending Operations pane.

If you delete a logical partition, then all existing logical partitions after the deleted logical partition will experience changes in device names.

For example, an extended partition contains four logical partitions A, B, C, and D. These logical partitions are accessed by the operating system as follows:

- Partition A as /dev/sda5.

- Partition B as /dev/sda6.

- Partition C as /dev/sda7.

- Partition D as /dev/sda8.

If partition B is deleted, then the remaining logical partitions will be accessed by the operating system as follows:

- Partition A as /dev/sda5.

- Partition C as /dev/sda6. Note the change in device name.

- Partition D as /dev/sda7. Note the change in device name.

Changes in a device name can cause problems if a partition is mounted using a device name. You can avoid the problem by using the file system label or Universally Unique Identifier (UUID) of the partition when mounting the partition.

Changes in a device name might adversely affect the following files:

- /etc/fstab - Contains a list of file systems to mount.

- /boot/grub/menu.lst - Contains operating system boot instructions for the grub boot loader.

Disks with loop or none partition tables do not contain a partition table, and do not contain partitions. A file system on a disk without a partition table is represented in &appname; by a virtual partition.

To delete the file system and virtual partition, choose format to cleared.

See .

#### Naming a Partition

Naming of partitions is only available with GUID partition tables (GPT).

Also see .

To set a name of a partition:

1. Select an unmounted partition. See .

2. Choose: Partition Name Partition. The application opens a Set partition name on /path-to-partition dialog.

3. Type a partition name in the Name text box.

4. Click OK. The application displays the set partition name operation in the Operations Pending pane.

#### Formatting a Partition

To format a partition:

1. Select an unmounted partition. See .

2. Choose: Partition Format to, and select a type of file system from the list. The application displays the format partition operation in the Operations Pending pane.

   See for the meaning of the cleared file system type.

#### Setting a Partition File System Label

To set a label or a volume name of a file system in a partition:

1. Select an unmounted partition. See .

2. Choose: Partition Label File System. The application opens a Set file system label on /path-to-partition dialog.

3. Type a label name in the Label text box.

4. Click OK. The application displays the set file system label operation in the Operations Pending pane.

#### Changing a Partition UUID

To change the Universally Unique Identifier (UUID) of a partition:

1. Select an unmounted partition. See .

2. Choose: Partition New UUID. The application displays the set a new random UUID operation in the Operations Pending pane.

   Changing the UUID might invalidate the Windows Product Activation key (WPA).

   On FAT and NTFS file systems, the Volume Serial Number is used as UUID. Changing the Volume Serial Number on the Windows system partition, normally C:, might invalidate the WPA key. An invalid WPA key will prevent login until you reactivate Windows.

   In an attempt to avoid invalidating the WPA key, on NTFS file systems only half of the UUID is set to a new random value. On FAT file systems, such a precaution is not possible.

   The WPA key should not be affected by changing the UUID of data partitions or removable media partitions. In rare cases, a partition that is present at boot time might be an exception to this rule.

   Changing the UUID when there is no need to do so might cause a GNU/Linux system to fail to boot, or to fail to mount a file system.

   Changing the UUID is only required after copying a partition. The UUID change is needed to prevent duplicate UUIDs when both the source and the copy of the partition are used on the same computer.

   If boot or mount problems occur you might need to edit configuration files, such as /etc/fstab, and regenerate the grub menu to ensure that the correct UUID is specified.

#### Specifying Partition Details

Specifying partition details is useful when performing actions such as create, resize, and move.

##### Specifying Partition Size and Location

To specify the size and the location of the partition, use one or a combination of the following:

- Click-and-hold the arrow at either end of the graphic area. Drag the arrow left or right within the display range.

- Click-and-hold the middle of the partition in the graphic area. Drag the partition left or right within the display range.

- Click the spin button arrows, or type numeric values to adjust the following fields:

  - Free Space Preceding

  - New Size

  - Free Space Following

The application refreshes both the graphic area and the numbers beside the three field labels.

##### Specifying Partition Alignment

To specify the alignment of the partition, click the Align to arrow button, and select from the list.

- Use MiB alignment for modern operating systems. This setting aligns partitions to start and end on precise mebibyte (1,048,576 byte) boundaries. MiB alignment provides enhanced performance when used with RAID systems and with Solid State Drives, such as USB flash drives.

- Use Cylinder alignment to maintain compatibility with operating systems released before the year 2000, such as DOS. This setting aligns partitions to start and end on disk cylinder boundaries.

  The Cylinder/Head/Sector values reported by modern disk devices no longer have a direct physical relationship to the data stored on the disk device. Hence it is no longer valid to use this alignment setting to achieve enhanced performance.

- Use None only if you have an in-depth knowledge of disk structure, partition tables, and boot records. This setting places partition boundaries relative to the end of any immediately preceding partition on the disk device. This setting is not guaranteed to reserve or respect space required for boot records.

##### Specifying Partition Type

To specify the partition type, click the Create as arrow button, and select from the list.

The msdos partition table limits partitions as follows:

- Maximum of 4 primary partitions.

- Maximum of 3 primary partitions, and 1 extended partition.

  The extended partition can contain multiple logical partitions. Some GNU/Linux distributions support accessing at most 15 partitions on a disk device.

- Maximum size of a partition is 2 Tebibytes using a sector size of 512 bytes. The partition must also start within the first 2 Tebibytes of the disk device.

Primary partitions provide better data recoverability because the partition boundaries are stored at known locations on the disk device.

##### Specifying Partition Name

Naming of partitions is only available with GUID partition tables (GPT). Therefore the field is only enabled on disk devices partitioned using GPT.

Also see .

To specify the partition name, type the name in the Partition name text box.

##### Specifying Partition File System

To specify the type of file system for the partition, click the File System arrow button, and select from the list.

Examples of uses for some file systems are as follows:

- ext2, ext3 and ext4 file systems can be used for installing GNU/Linux, and for data.

- linux-swap can be used with GNU/Linux to increase the virtual memory of your computer.

- fat16 and fat32 file systems can be used to share data between free and commercial operating systems.

- cleared can be used to clear any existing file system signatures and ensure that the partition is recognised as empty.

- unformatted can be used to just create a partition without writing a file system.

##### Specifying Partition File System Label

To specify the file system label in the partition, also known as a volume label, type a label name in the Label text box.

File system labels can be used to help you remember what is stored in the partition.

Unique labels can be used to mount file systems with the GNU/Linux operating system.

### Advanced Partition Actions

These actions will alter partitions on your disk device. These actions might modify the start or end boundaries of your existing partitions. These actions might cause operating systems to fail to boot.

#### Resizing a Partition

Resizing and moving a partition can be performed by a single &app; operation.

To resize a partition:

1. Select a partition. See .

   Unmounted or inactive partitions enable the most resize options.

   Support is available for online resize of some mounted or otherwise active partitions. However this support is often limited to grow only.

2. Choose: Partition Resize/Move. The application displays the Resize/Move /path-to-partition dialog.

3. Adjust the size of the partition. See .

   If you do not want the start of an existing partition to move, then do not change the free space preceding value. If the partition is mounted or otherwise active, then you will not be able to change the free space preceding value.

4. Specify the alignment of the partition. See .

5. Click Resize/Move. The application displays the resize/move partition operation in the Pending Operations pane.

6. Examine the operation that was added to the Pending Operations pane.

   If the operation involves a move step, then consider the following:

   - A move step might take a long time to complete.

   - If the partition is an operating system boot partition, then a move step might cause the operating system to fail to boot.

   If you are not prepared to wait or to fix potential operating system boot problems, then you might want to undo the operation. See .

To grow or move a partition, unallocated space must be available adjacent to the partition.

If you are growing a logical partition, then the unallocated space must be within the extended partition.

If you are growing a primary partition, then the unallocated space must not be within the extended partition.

You can move unallocated space to be inside or outside of the extended partition by resizing the extended partition boundaries.

A LUKS encrypted partition and the file system within can only be resized when the encryption mapping is open.

To improve the ability to shrink NTFS partitions, you might consider one or more of the following:

- Defragment the file system.

  Booting into Safe Mode with the commercial operating system that uses NTFS can improve the ability to defragment the file system. To enter Safe Mode press F8 while your computer is booting the operating system.

- Check the partition for errors with the following command:

      C:> chkdsk /f /r

  Remember to reboot back into the commercial operating system that uses NTFS to allow the `chkdsk` command to execute.

- Temporarily disable the paging file. The paging file occupies a fixed location in the partition that the defragmentation process is unable to move.

- Temporarily move large files to another partition or disk device. Large files are defined as greater than a few hundred Megabytes (MB).

- Ensure a proper shut down of the commercial operating system that uses NTFS before you resize the NTFS partition

- Leave at least 10 percent unused space in the NTFS partition. If you shrink the partition too much, then the commercial operating system might have difficulty functioning properly.

- Reboot twice into the commercial operating system that uses NTFS after shrinking the NTFS partition.

#### Moving a Partition

Moving and resizing a partition can be performed by a single &app; operation.

To move a partition:

1. Select an unmounted partition. See .

2. Choose: Partition Resize/Move. The application displays the Resize/Move /path-to-partition dialog.

3. Adjust the location of the partition. See .

4. Specify the alignment of the partition. See .

5. Click Resize/Move. The application displays the resize/move partition operation in the Pending Operations pane.

If the partition is an operating system boot partition, then the operating system might not boot after the move operation is applied.

If the operating system fails to boot, see .

A LUKS encrypted partition can only be moved when the encryption mapping is closed.

#### Copying and Pasting a Partition

To copy a partition:

1. Select an unmounted partition. See .

2. Choose: Partition Copy. The application marks the partition as the source partition.

To Paste a partition:

1. Select an unallocated space on a disk device. See .

2. Choose: Partition Paste. The application displays the Paste /path-to-partition dialog.

3. If you want you can adjust the size and location of the partition. See .

4. If you want you can specify the alignment of partition. See .

5. Click Paste. The application displays the copy partition operation in the Pending Operations pane.

The copy of the partition has the same file system label and Universally Unique Identifier (UUID) as the source partition. This can cause a problem when booting, or when mount actions use the file system label or UUID to identify the partition.

The problem is that the operating system will randomly select to mount either the source, or the copy of the partition. For example, on the first mount action the source partition might be mounted. On the next mount action the copy of the partition might be mounted. Over time this random nature of partition mounting might make files seem to mysteriously appear or disappear depending upon which partition is mounted. Random mounting of the source or the copy of the partition might also cause severe data corruption or loss.

To avoid the problem you are advised to do one of the following:

- After you have queued or applied the copy operation:

  1. Change the UUID of either the source, or the copy of the partition. See .

  2. If the file system label is not blank then change the file system label of either the source, or the copy of the partition. See .

- After you have applied the copy operation, delete or reformat the source partition.

- Use some other method to ensure that the source partition and the copy of the partition are not used on the same computer at the same time. For example, if the copy of the partition is on a separate drive then remove the drive from the computer.

The file system within a LUKS encrypted partition can only be copied when the encryption mapping is open.

To prevent unintended decryption of data, pasting into unallocated space creating a new partition is not permitted. However a LUKS encrypted partition can be pasted into an existing open LUKS encrypted partition maintaining an encrypted, or pasted into a plain partition making an unencrypted copy of the file system.

#### Managing Partition Flags

To manage partition flags:

1. Select a partition. See .

2. Choose: Partition Manage Flags. The application opens a Manage flags on /path-to-partition dialog.

   - To enable a flag, select the check box beside the flag. The application writes the enabled flag to the partition and refreshes the Manage flags on /path-to-partition dialog.

   - To disable a flag, deselect the check box beside the flag. The application writes the disabled flag to the partition and refreshes the Manage flags on /path-to-partition dialog.

   Manage Flags is only available for disks with partition tables. Disks with loop or none partition tables do not contain a partition table, and do not have partition flags.

   See to view the type of partition table.

To close the Manage flags on /path-to-partition dialog, click Close.

A description of flags in an msdos partition table follows:

- Boot is used by some commercial operating system boot loaders. The boot flag indicates the partition is active or bootable. Only one partition on a disk device can be active.

- Diag is used to indicate the partition is used for diagnostics / recovery.

- ESP indicates an EFI System Partition used to boot computers with the Unified Extensible Firmware Interface (UEFI) class 2 that includes compatibility support for BIOS functions including the MBR partition structure.

- Hidden is used by some commercial operating systems. The hidden flag makes the partition invisible to the operating system.

- Irst identifies an Intel Rapid Start Technology partition.

- LBA is used by some commercial operating system boot loaders. The LBA flag indicates the partition should be accessed using Logical Block Addressing (LBA), instead of Cylinder-Head-Sector (CHS) addressing.

- LVM is used to indicate the partition is used by a Logical Volume Manager (LVM).

- Palo is used by the Precision Architecture - Reduced Instruction Set Computing (PA-RISC) boot loader, palo.

- Prep is used to indicate the boot partition on Power Performance Computing (PowerPC) hardware.

- RAID is used to indicate the partition is used in a Redundant Array of Inexpensive Disks (RAID).

A description of flags in a gpt partition table follows:

- Atvrecv is used to indicate an Apple TV Recovery partition.

- BIOS_GRUB indicates a BIOS boot partition often used by the GRUB 2 boot loader.

- Boot is used by some commercial operating system boot loaders. The boot flag indicates the partition is active or bootable. Only one partition on a disk device can be active.

- Diag indicates the partition is used for diagnostics or recovery.

- ESP indicates an EFI System Partition used to boot computers with Extensible Firmware Interface (EFI) class 1 or Unified Extensible Firmware Interface (UEFI) class 2 or UEFI class 3.

- Hidden is used by some commercial operating systems. The hidden flag makes the partition invisible to the operating system.

- HP-service is used to indicate a Hewlett Packard service partition.

- Irst identifies an Intel Rapid Start Technology partition.

- Legacy_boot is used by some special purpose software to indicate the partition might be bootable.

- LVM indicates the partition is used by a Logical Volume Manager (LVM).

- Msftdata identifies partitions that contain Microsoft file systems such as NTFS or FAT.

- Msftres is used to indicate a Microsoft Reserved partition.

- Prep is used to indicate the boot partition on Power Performance Computing (PowerPC) hardware.

- RAID indicates the partition is used in a Redundant Array of Inexpensive Disks (RAID).

#### Checking a Partition

Checking a partition will attempt to find and fix problems in the file system. Checking a partition will attempt to grow the file system to fill the partition.

To check a partition:

1. Select an unmounted partition. See .

2. Choose: Partition Check. The application displays the check partition operation in the Pending Operations pane.

### Working with the Operation Queue

#### Undoing Last Operation

To undo the last operation in the operation queue, choose: Edit Undo Last Operation. The application removes the last operation from the queue displayed in the Pending Operations pane. If there are no operations remaining in the queue, the application closes the Pending Operations pane.

#### Clearing All Operations

To clear all operations in the operation queue, choose: Edit Clear All Operations. The application removes all operations from the queue and closes the Pending Operations pane.

#### Applying All Operations

To apply all operations:

1. Choose: Edit Apply All Operations. The application displays an Apply operations to device dialog.

   Editing partitions has the potential to cause LOSS of DATA. You are advised to backup your data before applying your partition editing operations.

2. Click Apply. The application displays an Applying pending operations dialog. The application applies each pending operation in the order you created the operations. The application displays a status update when each operation is completed.

   - To view more information, click Details. The application displays more details about operations.

     To view more information about the steps in each operation, click the arrow button beside each step.

   - To stop the operations while they are executing, click Cancel. The application displays a disabled Force Cancel (5) button and counts down for 5 seconds.

     Cancel instructs the application to stop or roll back operations as necessary to ensure data integrity.

     If operations have not halted after 5 seconds the application enables the Force Cancel button.

     To force the operations to stop, click Force Cancel. The application displays a warning dialog.

     Click Continue Operation to allow the roll back operations to complete, or click Cancel Operation to cancel the roll back operations.

     Cancel Operation terminates the safe roll back of operations and might cause SEVERE file system damage and data loss. You are advised to click Continue Operation to allow the roll back to complete.

     When the application finishes performing operations, the application displays the Save Details button and the Close button.

3. If you want to save the details from applying all operations, then click Save Details. The application displays a Save Details dialog.

   1. If you want to change the default file name, then type a file name in the Name text box.

   2. If you want to save the file in a folder different than /root, click Browse for other folders. The application displays a file system navigator.

      Use the file system navigator to select a folder.

   3. Click Save to save the file. The application saves the details file.

   If you use &app; from a Live CD, then the root file system exists in RAM memory. All files saved to the Live CD root file system will be lost when you shut down the computer.

   If you saved the &app; details to the Live CD root file system, then you need to copy the file to more permanent storage. Examples of more permanent storage are a hard disk drive or a USB flash memory drive.

4. Click Close. The application closes the Applying pending operations dialog. The application rescans all the disk devices and refreshes the device partition layout in the &app; window.

## Acquiring GParted on Live CD

A Live CD is a Compact Disc that contains a bootable operating system. A Live CD enables you to boot your computer from the CD.

Using &app; from a Live CD has the following advantages:

- You can edit all of your partitions because the partitions are not mounted.

- You can edit partitions on computers that do not have a bootable operating system.

The &app; application is available on many Live CD distributions.

You can download a Live CD image containing &app; from the following web sites:

- GParted Live CD

- SystemRescue (also known as SystemRescueCD)

The GParted Live CD image can be written to a USB flash drive.

If your computer can boot from Universal Serial Bus (USB) then you might prefer to boot and use &app; from a USB flash drive.

To avoid wasting a blank CD when burning a CD image file, use the following tips:

- Ensure the checksum of the downloaded file matches the checksum posted on the download page.

- Be sure to burn the .iso file as an image to the blank CD. If you burn the .iso file as data to a blank CD then the CD will not boot in your computer.

## Fixing Operating System Boot Problems

Your computer might fail to boot an operating system when you perform one of the following actions:

- Delete a partition.

- Move a partition.

- Install another operating system and overwrite the Master Boot Record (MBR).

Fortunately the failure to boot can be often be fixed.

If your computer uses the GRUB boot loader, see to restore the ability to boot.

If your computer does not use GRUB then you are advised to consult documentation for your boot loader to learn how to fix the problem. You might consult the &appname; FAQ, or the &appname; forum. You might also search the Internet to learn how other people have solved similar problems.

### Fixing GRUB boot problem

The Grand Unified Boot loader (GRUB) is used by many GNU/Linux distributions. To fix GRUB boot problems you start by determining which major version of GRUB was used.

There are two major versions of GRUB:

- GRUB, also known as GRUB 2, covers versions 1.98 and higher. GRUB 2 works with both GUID partition tables (GPT) and msdos partition tables.

- GRUB Legacy, traditionally known as GRUB, covers versions 0.9x and earlier. GRUB Legacy works with msdos partition tables only.

GRUB 2 is used as the default boot loader in the following GNU/Linux distributions:

- CentOS 7 and higher

- Debian 6 (Squeeze) and higher

- Fedora 16 (Verne) and higher

- openSUSE 12.2 and higher

- Ubuntu 9.10 (Karmic Koala) and higher

If you are unsure whether your computer uses GRUB 2 or GRUB Legacy, you might try searching for the answer on the Internet.

#### Restoring GRUB 2 Boot Loader

Use the following steps to restore the GRUB 2 boot loader:

1. Boot from Live media such as GParted Live or your GNU/Linux distribution image. Open a terminal window.

2. Determine which partition contains the / file system for your GNU/Linux distribution.

   Use GParted to list the partitions on your disk device. Look for a partition that contains your GNU/Linux / file system. This Linux partition will likely use a file system such as ext2, ext3, ext4, or btrfs.

   If the / partition is on LVM then the Logical Volume Manager must be active. LVM can be started with the command:

       # vgchange -a y

   With LVM, the equivalent of a disk partition is a Logical Volume. Logical Volumes can be listed with the command:

       # lvscan

   If the / partition is on RAID, then the RAID must be active. Linux Software RAID can be started with the command:

       # mdadm --assemble --scan

3. Create a mount point directory by entering (as root):

       # mkdir /tmp/mydir

4. Mount the / partition on the mount point directory. For example assume the / file system is contained in the /dev/sda5 partition. Enter (as root):

       # mount /dev/sda5 /tmp/mydir

5. If you have a separate /boot partition, for example at /dev/sda3, then an extra step is required. Mount the /boot partition at /tmp/mydir/boot by entering (as root):

       # mount /dev/sda3 /tmp/mydir/boot

   If you do not know whether you have a separate boot partition then you probably do not and can ignore this step.

6. Prepare to change the root environment by entering (as root):

       # mount --bind /dev /tmp/mydir/dev

       # mount --bind /proc /tmp/mydir/proc

       # mount --bind /sys /tmp/mydir/sys

7. Change the root environment by entering (as root):

       # chroot /tmp/mydir

8. Reinstall GRUB 2 on the boot device. Note that the device name is used and not the partition name. For example, if the / partition is /dev/sda5 then the device is /dev/sda.

   For Debian, Ubuntu, and other offshoot GNU/Linux distributions, enter the command (as root):

       # grub-install /dev/sda

   For CentOS, Fedora, openSUSE and other offshoot GNU/Linux distributions, enter the command (as root):

       # grub2-install /dev/sda

9. Exit the chroot environment by entering (as root):

       # exit

10. Reboot your computer.

#### Restoring GRUB Legacy Boot Loader

Use the following steps to restore the GRUB Legacy boot loader:

1. Boot from Live media such as your GNU/Linux distribution image. Open a terminal window.

   The Live media must contain the GRUB Legacy boot loader. If your GNU/Linux distribution uses GRUB Legacy, then the distribution Live media will also contain GRUB Legacy.

2. Start the grub application from the command line (as root).

       # grub

3. Find where grub stage1 is located by using one of the following:

   If the /boot folder is stored in the / partition, use the command:

       grub> find /boot/grub/stage1

   If the /boot folder is stored in a partition different than the / partition, use the command:

       grub> find /grub/stage1

   The output from the `find` command might look like the following:

        (hd0,0)

   If more than one line is listed in the command output, you will need to decide which device you use for grub.

4. Set the grub root device by specifying the device returned by the `find` command. This should be the partition containing the boot directory.

       grub> root (hd0,0)

5. Reinstall the grub boot loader into the Master Boot Record (MBR) with:

       grub> setup (hd0)

   If you want to install the grub boot loader into the boot sector of a partition, instead specify a partition with:

       grub> setup (hd0,0)

6. Exit grub.

       grub> quit

7. Reboot your computer.

## Recovering Partition Tables

If you accidentally overwrite your partition table, there is a chance that you might be able to recover it.

The testdisk application is designed to help recover lost partitions. For more information about testdisk, see .

If no partitions are found, you have other options to try to rescue your data. The photorec application is designed to help recover many different types of lost files. For more information about photorec, see .

Both testdisk and photorec applications are included on each Live CD listed in .