fprintd (1.94.5-2) unstable; urgency=medium

  * debian/patches: Translation updates
    Also synchronize the potfile with upstream changes

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Wed, 02 Apr 2025 13:50:18 +0200

fprintd (1.94.5-1) unstable; urgency=medium

  * New upstream release
  * debian/control: Bump build dependency on libfprint 1.94.9
  * debian/patches: Drop, applied upstream

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 20 Feb 2025 21:50:08 +0100

fprintd (1.94.4-1) unstable; urgency=medium

  * New upstream release
  * debian/watch: Update to work with newer gitlab
    Dropped support for old versions syntax, but it's not something we use for
  * debian/control: Bump build dependency on GLib 2.64
  * d/p: Add upstream patches to fix PAM tests timeouts
  * debian/rules: Do not ignore PAM tests
  * debian/fprintd.postinst: Drop, it's unneeded
  * debian/control: Update Standards Version to 4.7.0 (no change required)

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 05 Sep 2024 04:36:53 +0200

fprintd (1.94.3-1) unstable; urgency=medium

  [ Marco Trevisan (Treviño) ]
  * New upstream release (LP: #2060067, Closes: #1064813)
  * debian/patches: Drop, all applied upstream

  [ Michael Biebl ]
  * Install PAM module in /usr (Closes: #1061580)
  * Install systemd unit in /usr (Closes: #1061580)

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 04 Apr 2024 03:58:13 +0200

fprintd (1.94.2-3) unstable; urgency=medium

  * debian/control: depend on polkitd instead of policykit-1
    fprintd requires polkitd but it uses it via dbus. (Closes: #1025558)
  * debian/rules: Skip pam tests as they are timeouting in debian.
    This is a build failure that we've in debian but not upstream, so while
    we figure out what it is, it's better to just skip the tests to unblock
    fprintd to land.
  * debian/patches: Cherry pick upstream fixes

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Sat, 23 Dec 2023 04:28:38 +0100

fprintd (1.94.2-2) unstable; urgency=medium

  * debian/patches: Cherry-pick upstream fixes
    - Avoid to warn when not needed
    - Fix dbusmock AddDevice calls to include optional argument
      (Closes: #1009395)
    - Translation updates

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Tue, 07 Jun 2022 20:05:39 +0200

fprintd (1.94.2-1) unstable; urgency=medium

  * New upstream release:
    - Add PAM module options to ignore timeout/retry limits
    - A lot of translation updates after the POT file was fixed
    - Improve meson build file and fix building with meson 0.61.0

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Fri, 25 Feb 2022 01:44:22 +0100

fprintd (1.94.1-1) unstable; urgency=medium

  * New upstream release
  * debian/patches: Drop, all was applied upstream
  * debian/pam-configs/fprintd: Use proper max-tries config name
    (Closes: #997667)

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Wed, 03 Nov 2021 17:05:11 +0100

fprintd (1.94.0-1) unstable; urgency=medium

  * New upstream release
  * debian/control: Build depend on libfprint 1.94
  * debian/patches: Fix builds with meson 60
  * debian/rules: Just use verbose logging on errors
  * debian/patches: Cherry-pick upstream fixes and translation updates

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 28 Oct 2021 15:39:31 +0200

fprintd (1.90.9-1) unstable; urgency=medium

  [ Marco Trevisan (Treviño) ]
  * New upstream release:
    - Fix multiple daemon lockup issues (#97)
    - Fix print garbage collection to not delete used prints
    - pam: Use the device with the most prints
  * debian/control: Mark fprintd-doc as Multi-Arch: foreign

  [ Helmut Grohne ]
  * Fix nocheck FTFBS: Drop <!nocheck> from non-optional dependencies.
    (Closes: #977395)

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 21 Jan 2021 21:29:07 +0100

fprintd (1.90.8-1) unstable; urgency=medium

  * New upstream release
    - pam: Only listen to NameOwnerChanged after fprintd is known to run
    - Place new ObjectManager DBus API at /net/reactivated/Fprint
  * debian/patches: Remove all patches, applied upstream or not needed anymore
  * debian/control: Depend on systemd 235, but only in linux
  * debian/rules: Require systemd and set unit path only on linux
  * debian/fprintd.install: Use dh-exec to filter linux-only files

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Mon, 14 Dec 2020 21:32:29 +0100

fprintd (1.90.7-1) unstable; urgency=medium

  * New upstream release
    - Fix fprintd DBus configuration (Closes: #976990)
    - Change details of what requires authorization
    - Fix various race conditions in pam_fprintd
    - Permit interactive authorization from fprintd utilities
    - Do not allow deletion while another operation is ongoing
    - pam: Guard strdup calls against NULL pointers
  * debian/patches:
    - Refresh
    - Ignore NameOwnerChanged until fprintd is running

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Fri, 11 Dec 2020 00:03:27 +0100

fprintd (1.90.5-2) unstable; urgency=medium

  * debian/patches: Make tests run with actual required libfprint version
  * debian/control: Remove test-only dependency on libfprint 1.90.4.
    Tests are now working with older libfprint versions too
  * debian/control: Add myself to Uploaders
  * debian/gbp.conf: Include suggested settings by GNOME team.
    Even if fprintd is not part of GNOME I think these settings are good
    practice anyways.

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 03 Dec 2020 15:57:19 +0100

fprintd (1.90.5-1) unstable; urgency=medium

  * New upstream release:
    - Permit building with polkit older than 0.114
    - Fix possible issues with PAM test
    - Fix incorrect DBus policy
    - Fix build so that CFLAGS environment is correctly used
    - Skip hotplug test with older libfprint (which times out otherwise)
  * debian/patches: Drop patches applied upstream

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Wed, 02 Dec 2020 05:35:33 +0100

fprintd (1.90.4-1) unstable; urgency=medium

  * Team upload.
  [ Marco Trevisan (Treviño) ]
  * New upstream release:
    - Use GDBus and async Polkit checks
    - Authentication is now required to enroll a new print (LP: #1532264,
      Closes: #719004)
    - Add support for the libfprint early reporting mechanism
    - Proper hotplug support together with libfprint 1.90.4
    - Handle STATE_DIRECTORY containing multiple paths
    - Various memory fixes (LP: #1888495)
  * debian/control:
    - Remove build dependency on dbus-glib (Closes: #955893)
    - Mark as <!nocheck> the packages required only for testing
    - Use debhelper 13
    - Bump libfprint-2 dependency on 1.90.4 on test case
  * debian/rules:
    - remove unneeded override to force --fail-missing (as per dh 13)
    - Increase tests timeout multiplier
  * debian/patches:
    - Refresh
    - Define auto-pointers functions if not defined:
      Fixes a build failure with debian polkit version.
    - Cleanup pam-wrapper temporary dir when running tests
    - Fix dbus-policy file to address lintian
    - Ensure we generate debug symbols in debian builds

  [ Laurent Bigonville ]
  * debian/control: Bump Standards-Version to 4.5.1 (no further changes)

 -- Laurent Bigonville <bigon@debian.org>  Tue, 01 Dec 2020 13:06:59 +0100

fprintd (1.90.1-2) unstable; urgency=low

  * Team upload.
  * Simplify the installation of the pam-config, do not install one
    configuration file per architecture
  * debian/NEWS: Add an news entry explaining that the user will have to
    re-enroll their fingerprints upon update to 1.90.1.

 -- Laurent Bigonville <bigon@debian.org>  Sun, 15 Nov 2020 16:22:57 +0100

fprintd (1.90.1-1) experimental; urgency=medium

  * Team upload.
  * New upstream release
    - Switch to meson (Closes: #830015)
    - Adjust the build-dependencies
  * debian/control: Bump Standards-Version to 4.5.0 (no further changes)
  * debian/control: Mark the -doc package with Build-Profiles: <!nodoc> and
    move gtk-doc-tools to the B-D-I

 -- Laurent Bigonville <bigon@debian.org>  Wed, 19 Feb 2020 14:01:10 +0100

fprintd (0.9.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream release
  * Add debian/gbp.conf file
  * debian/control: Update the Vcs-* fields, it's now hosted on salsa
  * debian/patches/remove_unneeded_systemd_check.patch: Do not check the
    version of systemd at build-time, this is not needed
  * fprint-doc: Add a symlink in /usr/share/doc and adjust the .doc-base file
    to please lintian
  * debian/control: Bump Standards-Version to 4.4.1 (no further changes)
  * Bump debhelper compatibility to 12, switch to dh_missing
  * Install the daemon in /usr/libexec/ now that the policy allows it

 -- Laurent Bigonville <bigon@debian.org>  Sat, 11 Jan 2020 12:54:27 +0100

# Older entries have been removed from this changelog.
# To read the complete changelog use `apt changelog fprintd`.
